summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2018-12-21ethernet: fman: fix wrong of_node_put() in probe functionNicolas Saenz Julienne
[ Upstream commit ecb239d96d369c23c33d41708646df646de669f4 ] After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Fixes: 414fd46e7762 ("fsl/fman: Add FMan support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21net/mlx4_en: Fix build break when CONFIG_INET is offSaeed Mahameed
[ Upstream commit 1b603f9e4313348608f256b564ed6e3d9e67f377 ] MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17net: hisilicon: remove unexpected free_netdevPan Bian
[ Upstream commit c758940158bf29fe14e9d0f89d5848f227b48134 ] The net device ndev is freed via free_netdev when failing to register the device. The control flow then jumps to the error handling code block. ndev is used and freed again. Resulting in a use-after-free bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17ixgbe: recognize 1000BaseLX SFP modules as 1GbpsJosh Elsasser
[ Upstream commit a8bf879af7b1999eba36303ce9cc60e0e7dd816c ] Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules, allowing the core driver code to establish a link over this SFP type. This is done by the out-of-tree driver but the fix wasn't in mainline. Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”) Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers") Signed-off-by: Josh Elsasser <jelsasser@appneta.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17igb: fix uninitialized variablesYunjian Wang
[ Upstream commit e4c39f7926b4de355f7df75651d75003806aae09 ] This patch fixes the variable 'phy_word' may be used uninitialized. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17net: thunderx: fix NULL pointer dereference in nic_removeLorenzo Bianconi
[ Upstream commit 24a6d2dd263bc910de018c78d1148b3e33b94512 ] Fix a possible NULL pointer dereference in nic_remove routine removing the nicpf module if nic_probe fails. The issue can be triggered with the following reproducer: $rmmod nicvf $rmmod nicpf [ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014 [ 521.422777] Mem abort info: [ 521.425561] ESR = 0x96000004 [ 521.428624] Exception class = DABT (current EL), IL = 32 bits [ 521.434535] SET = 0, FnV = 0 [ 521.437579] EA = 0, S1PTW = 0 [ 521.440730] Data abort info: [ 521.443603] ISV = 0, ISS = 0x00000004 [ 521.447431] CM = 0, WnR = 0 [ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42 [ 521.457022] [0000000000000014] pgd=0000000000000000 [ 521.461916] Internal error: Oops: 96000004 [#1] SMP [ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 521.523451] pc : nic_remove+0x24/0x88 [nicpf] [ 521.527808] lr : pci_device_remove+0x48/0xd8 [ 521.532066] sp : ffff000013433cc0 [ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000 [ 521.540672] x27: 0000000000000000 x26: 0000000000000000 [ 521.545974] x25: 0000000056000000 x24: 0000000000000015 [ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070 [ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000 [ 521.561877] x19: 0000000000000000 x18: 0000000000000025 [ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000 [ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001 [ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003 [ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184 [ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0 [ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3) [ 521.621490] Call trace: [ 521.623928] nic_remove+0x24/0x88 [nicpf] [ 521.627927] pci_device_remove+0x48/0xd8 [ 521.631847] device_release_driver_internal+0x1b0/0x248 [ 521.637062] driver_detach+0x50/0xc0 [ 521.640628] bus_remove_driver+0x60/0x100 [ 521.644627] driver_unregister+0x34/0x60 [ 521.648538] pci_unregister_driver+0x24/0xd8 [ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf] [ 521.657672] __arm64_sys_delete_module+0x150/0x218 [ 521.662460] el0_svc_handler+0x94/0x110 [ 521.666287] el0_svc+0x8/0xc [ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660) Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17net/mlx4_core: Correctly set PFC param if global pause is turned off.Tarick Bedeir
[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ] rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1. Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17net: 8139cp: fix a BUG triggered by changing mtu with network trafficSu Yanjun
[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ] When changing mtu many times with traffic, a bug is triggered: [ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26! [ 1035.684042] invalid opcode: 0000 [#1] SMP [ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter devlink ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic [ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror dm_region_hash dm_log dm_mod [last unloaded: 8139cp] [ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1 [ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti: ffff8f5a2e32c000 [ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093 [ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX: 0000000000000000 [ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI: ffff8f599fea3ec0 [ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09: 0000000000000000 [ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12: ffff8f599fea3e00 [ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000184 [ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000) knlGS:0000000000000000 [ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4: 00000000001406e0 [ 1035.684162] Call Trace: [ 1035.684162] <IRQ> [ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp] [ 1035.684162] [<ffffffffba14a294>] __handle_irq_event_percpu+0x44/0x1c0 [ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80 [ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60 [ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110 [ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0 [ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0 [ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162 [ 1035.684162] <EOI> [ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70 [ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120 [ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30 [ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0 [ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10 [ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0 [ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500 [ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150 [ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0 [ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30 [ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f 9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48 [ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP <ffff8f5a75483e50> It's not the same as in 7fe0ee09 patch described. As 8139cp uses shared irq mode, other device irq will trigger cp_interrupt to execute. cp_change_mtu -> cp_close -> cp_open In cp_close routine just before free_irq(), some interrupt may occur. In my environment, cp_interrupt exectutes and IntrStatus is 0x4, exactly TxOk. That will cause cp_tx to wake device queue. As device queue is started, cp_start_xmit and cp_open will run at same time which will cause kernel BUG. For example: [#] for tx descriptor At start: [#][#][#] num_queued=3 After cp_init_hw->cp_start_hw->netdev_reset_queue: [#][#][#] num_queued=0 When 8139cp starts to work then cp_tx will check num_queued mismatchs the complete_bytes. The patch will check IntrMask before check IntrStatus in cp_interrupt. When 8139cp interrupt is disabled, just return. Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13net: amd: add missing of_node_put()Yangtao Li
[ Upstream commit c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13net: faraday: ftmac100: remove netif_running(netdev) check before disabling ↵Vincent Chen
interrupts [ Upstream commit 426a593e641ebf0d9288f0a2fcab644a86820220 ] In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13net/mlx4: Fix UBSAN warning of signed integer overflowAya Levin
[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ] UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13net/mlx4_core: Fix uninitialized variable compilation warningTariq Toukan
[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ] Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13net/mlx4_core: Zero out lkey field in SW2HW_MPT fw commandJack Morgenstein
[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ] When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13qed: Fix reading wrong value in loop conditionDenis Bolotin
[ Upstream commit ed4eac20dcffdad47709422e0cb925981b056668 ] The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13qed: Fix PTT leak in qed_drain()Denis Bolotin
[ Upstream commit 9aaa4e8ba12972d674caeefbc5f88d83235dd697 ] Release PTT before entering error flow. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13bnx2x: Assign unique DMAE channel number for FW DMAE transactions.Sudarsana Reddy Kalluru
[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ] Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-08net: qed: use correct strncpy() sizeArnd Bergmann
commit 11f711081af0eb54190dc0de96ba4a9cd494666b upstream. passing the strlen() of the source string as the destination length is pointless, and gcc-8 now warns about it: drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump': include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=] This changes qed_grc_dump_big_ram() to instead uses the length of the destination buffer, and use strscpy() to guarantee nul-termination. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01net: bcmgenet: fix OF child-node lookupJohan Hovold
[ Upstream commit d397dbe606120a1ea1b11b0020c3f7a3852da5ac ] Use the new of_get_compatible_child() helper to lookup the mdio child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27qed: Fix blocking/unlimited SPQ entries leakDenis Bolotin
[ Upstream commit 2632f22ebd08da249c2017962a199a0cfb2324bf ] When there are no SPQ entries left in the free_pool, new entries are allocated and are added to the unlimited list. When an entry in the pool is available, the content is copied from the original entry, and the new entry is sent to the device. qed_spq_post() is not aware of that, so the additional entry is stored in the original entry as p_post_ent, which can later be returned to the pool. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27qed: Fix memory/entry leak in qed_init_sp_request()Denis Bolotin
[ Upstream commit 39477551df940ddb1339203817de04f5caaacf7a ] Free the allocated SPQ entry or return the acquired SPQ entry to the free list in error flows. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-23tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control pathsSiva Reddy Kallam
[ Upstream commit 59663e42199c93d1d7314d1446f6782fc4b1eb81 ] This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21bna: ethtool: Avoid reading past end of bufferKees Cook
[ Upstream commit 4dc69c1c1fff2f587f8e737e70b4a4e7565a5c94 ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21e1000: fix race condition between e1000_down() and e1000_watchdogVincenzo Maffione
[ Upstream commit 44c445c3d1b4eacff23141fa7977c3b2ec3a45c9 ] This patch fixes a race condition that can result into the interface being up and carrier on, but with transmits disabled in the hardware. The bug may show up by repeatedly IFF_DOWN+IFF_UP the interface, which allows e1000_watchdog() interleave with e1000_down(). CPU x CPU y -------------------------------------------------------------------- e1000_down(): netif_carrier_off() e1000_watchdog(): if (carrier == off) { netif_carrier_on(); enable_hw_transmit(); } disable_hw_transmit(); e1000_watchdog(): /* carrier on, do nothing */ Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21e1000: avoid null pointer dereference on invalid stat typeColin Ian King
[ Upstream commit 5983587c8c5ef00d6886477544ad67d495bc5479 ] Currently if the stat type is invalid then data[i] is being set either by dereferencing a null pointer p, or it is reading from an incorrect previous location if we had a valid stat type previously. Fix this by skipping over the read of p on an invalid stat type. Detected by CoverityScan, CID#113385 ("Explicit null dereferenced") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-13ixgbevf: VF2VF TCP RSSSebastian Basierski
[ Upstream commit 7fb94bd58dd6650a0158e68d414e185077d8b57a ] While VF2VF with RSS communication, RSS Type were wrongly recognized and RSS hash was not calculated as it should be. Packets was distributed on various queues by accident. This commit fixes that behaviour and causes proper RSS Type recognition. Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13net: qla3xxx: Remove overflowing shift statementNathan Chancellor
[ Upstream commit 8c3bf9b62b667456a57aefcf1689e826df146159 ] Clang currently warns: drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift result (0xF00000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data)); ~~~~~~~~~~~~~~ ^ ~~ 1 warning generated. The warning is certainly accurate since ISP_NVRAM_MASK is defined as (0x000F << 16) which is then shifted by 16, resulting in 64424509440, well above UINT_MAX. Given that this is the only location in this driver where ISP_NVRAM_MASK is shifted again, it seems likely that ISP_NVRAM_MASK was originally defined without a shift and during the move of the shift to the definition, this statement wasn't properly removed (since ISP_NVRAM_MASK is used in the statenent right above this). Only the maintainers can confirm this since this statment has been here since the driver was first added to the kernel. Link: https://github.com/ClangBuiltLinux/linux/issues/127 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10net: fs_enet: do not call phy_stop() in interruptsChristophe Leroy
[ Upstream commit f8b39039cbf2a15f2b8c9f081e1cbd5dee00aaf5 ] In case of TX timeout, fs_timeout() calls phy_stop(), which triggers the following BUG_ON() as we are in interrupt. [92708.199889] kernel BUG at drivers/net/phy/mdio_bus.c:482! [92708.204985] Oops: Exception in kernel mode, sig: 5 [#1] [92708.210119] PREEMPT [92708.212107] CMPC885 [92708.214216] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 4.9.61 #39 [92708.223227] task: c60f0a40 task.stack: c6104000 [92708.227697] NIP: c02a84bc LR: c02a947c CTR: c02a93d8 [92708.232614] REGS: c6105c70 TRAP: 0700 Tainted: G W (4.9.61) [92708.241193] MSR: 00021032 <ME,IR,DR,RI>[92708.244818] CR: 24000822 XER: 20000000 [92708.248767] GPR00: c02a947c c6105d20 c60f0a40 c62b4c00 00000005 0000001f c069aad8 0001a688 GPR08: 00000007 00000100 c02a93d8 00000000 000005fc 00000000 c6213240 c06338e4 GPR16: 00000001 c06330d4 c0633094 00000000 c0680000 c6104000 c6104000 00000000 GPR24: 00000200 00000000 ffffffff 00000004 00000078 00009032 00000000 c62b4c00 NIP [c02a84bc] mdiobus_read+0x20/0x74 [92708.281517] LR [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.286547] Call Trace: [92708.288980] [c6105d20] [c6104000] 0xc6104000 (unreliable) [92708.294339] [c6105d40] [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.300098] [c6105d50] [c02a5330] phy_stop+0x60/0x9c [92708.305007] [c6105d60] [c02c84d0] fs_timeout+0xdc/0x110 [92708.310197] [c6105d80] [c035cd48] dev_watchdog+0x268/0x2a0 [92708.315593] [c6105db0] [c0060288] call_timer_fn+0x34/0x17c [92708.321014] [c6105dd0] [c00605f0] run_timer_softirq+0x21c/0x2e4 [92708.326887] [c6105e50] [c001e19c] __do_softirq+0xf4/0x2f4 [92708.332207] [c6105eb0] [c001e3c8] run_ksoftirqd+0x2c/0x40 [92708.337560] [c6105ec0] [c003b420] smpboot_thread_fn+0x1f0/0x258 [92708.343405] [c6105ef0] [c003745c] kthread+0xbc/0xd0 [92708.348217] [c6105f40] [c000c400] ret_from_kernel_thread+0x5c/0x64 [92708.354275] Instruction dump: [92708.357207] 7c0803a6 bbc10018 38210020 4e800020 7c0802a6 9421ffe0 54290024 bfc10018 [92708.364865] 90010024 7c7f1b78 81290008 552902ee <0f090000> 3bc3002c 7fc3f378 90810008 [92708.372711] ---[ end trace 42b05441616fafd7 ]--- This patch moves fs_timeout() actions into an async worker. Fixes: commit 48257c4f168e5 ("Add fs_enet ethernet network driver, for several embedded platforms") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10r8169: fix NAPI handling under high loadHeiner Kallweit
[ Upstream commit 6b839b6cf9eada30b086effb51e5d6076bafc761 ] rtl_rx() and rtl_tx() are called only if the respective bits are set in the interrupt status register. Under high load NAPI may not be able to process all data (work_done == budget) and it will schedule subsequent calls to the poll callback. rtl_ack_events() however resets the bits in the interrupt status register, therefore subsequent calls to rtl8169_poll() won't call rtl_rx() and rtl_tx() - chip interrupts are still disabled. Fix this by calling rtl_rx() and rtl_tx() independent of the bits set in the interrupt status register. Both functions will detect if there's nothing to do for them. Fixes: da78dbff2e05 ("r8169: remove work from irq handler.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modulesNiklas Cassel
[ Upstream commit 30549aab146ccb1275230c3b4b4bc6b4181fd54e ] When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC, or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set. The only exception is CONFIG_STMMAC_PCI. When calling of_mdiobus_register(), it will call our ->reset() callback, which is set to stmmac_mdio_reset(). Most of the code in stmmac_mdio_reset() is protected by a "#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate to false when CONFIG_STMMAC_PLATFORM=m. Because of this, the phy reset gpio will only be pulled when stmmac is built as built-in, but not when built as modules. Fix this by using "#if IS_ENABLED()" instead of "#if defined()". Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10net: ena: fix NULL dereference due to untimely napi initializationArthur Kiyanovski
[ Upstream commit 78a55d05def95144ca5fa9a64c49b2a0636a9866 ] napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10enic: do not overwrite error codeGovindarajulu Varadarajan
[ Upstream commit 56f772279a762984f6e9ebbf24a7c829faba5712 ] In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e268509 ("enic: enable rq before updating rq descriptors") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10i40e: avoid NVM acquire deadlock during NVM updateAnjali Singhai Jain
[ Upstream commit 09f79fd49d94cda5837e9bfd0cb222232b3b6d9f ] X722 devices use the AdminQ to access the NVM, and this requires taking the AdminQ lock. Because of this, we lock the AdminQ during i40e_read_nvm(), which is also called in places where the lock is already held, such as the firmware update path which wants to lock once and then unlock when finished after performing several tasks. Although this should have only affected X722 devices, commit 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) added locking for all NVM reads, regardless of device family. This resulted in us accidentally causing NVM acquire timeouts on all devices, causing failed firmware updates which left the eeprom in a corrupt state. Create unsafe non-locked variants of i40e_read_nvm_word and i40e_read_nvm_buffer, __i40e_read_nvm_word and __i40e_read_nvm_buffer respectively. These variants will not take the NVM lock and are expected to only be called in places where the NVM lock is already held if needed. Since the only caller of i40e_read_nvm_buffer() was in such a path, remove it entirely in favor of the unsafe version. If necessary we can always add it back in the future. Additionally, we now need to hold the NVM lock in i40e_validate_checksum because the call to i40e_calc_nvm_checksum now assumes that the NVM lock is held. We can further move the call to read I40E_SR_SW_CHECKSUM_WORD up a bit so that we do not need to acquire the NVM lock twice. This should resolve firmware updates and also fix potential raise that could have caused the driver to report an invalid NVM checksum upon driver load. Reported-by: Stefan Assmann <sassmann@kpanic.de> Fixes: 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10qed: Warn PTT usage by wrong hw-functionMintz, Yuval
[ Upstream commit 3a50d3518dcba44f8a0f9356b7140fe1499984ea ] PTT entries are per-hwfn; If some errneous flow is trying to use a PTT belonging to a differnet hwfn warn user, as this can break every register accessing flow later and is very hard to root-cause. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net/mlx5: Fix health work queue spin lock to IRQ safeMoshe Shemesh
[ Upstream commit 6377ed0bbae6fa28853e1679d068a9106c8a8908 ] spin_lock/unlock of health->wq_lock should be IRQ safe. It was changed to spin_lock_irqsave since adding commit 0179720d6be2 ("net/mlx5: Introduce trigger_health_work function") which uses spin_lock from asynchronous event (IRQ) context. Thus, all spin_lock/unlock of health->wq_lock should have been moved to IRQ safe mode. However, one occurrence on new code using this lock missed that change, resulting in possible deadlock: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&(&health->wq_lock)->rlock); kernel: <Interrupt> kernel: lock(&(&health->wq_lock)->rlock); kernel: #012 *** DEADLOCK *** Fixes: 2a0165a034ac ("net/mlx5: Cancel delayed recovery work when unloading the driver") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net/mlx5: Fix driver load error flow when firmware is stuckGal Pressman
[ Upstream commit 8ce59b16b4b6eacedaec1f7b652b4781cdbfe15f ] When wait for firmware init fails, previous code would mistakenly return success and cause inconsistency in the driver state. Fixes: 6c780a0267b8 ("net/mlx5: Wait for FW readiness before initializing command interface") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compareTalat Batheesh
[ Upstream commit e58edaa4863583b54409444f11b4f80dff0af1cd ] Helmut reported a bug about division by zero while running traffic and doing physical cable pull test. When the cable unplugged the ppms become zero, so when dividing the current ppms by the previous ppms in the next dim iteration there is division by zero. This patch prevent this division for both ppms and epms. Fixes: c3164d2fc48f ("net/mlx5e: Added BW check for DIM decision mechanism") Reported-by: Helmut Grauer <helmut.grauer@de.ibm.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net: stmmac: ensure jumbo_frm error return is correctly checked for -ve valueColin Ian King
[ Upstream commit 594238158bf748c285f0a73222cd9b7ccf3c525d ] The current comparison of entry < 0 will never be true since entry is an unsigned integer. Make entry an int to ensure -ve error return values from the call to jumbo_frm are correctly being caught. Detected by CoverityScan, CID#1238760 ("Macro compares unsigned to 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10qlcnic: Fix tunnel offload for 82xx adaptersChopra, Manish
[ Upstream commit 4bd7ef0b033721b659b9357057e76d1ced95c1da ] Qlogic's 82xx series adapter doesn't support tunnel offloads, driver incorrectly assumes that it is supported and causes firmware hang while running tunnel IO. This patch fixes this by not advertising tunnel offloads for 82xx adapters. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net: ethernet: stmmac: Fix altr_tse_pcs SGMII InitializationThor Thayer
[ Upstream commit 77032732d0e89b83c3bca75b857a1f63e9efb44b ] Fix NETDEV WATCHDOG timeout on startup by adding missing register writes that properly setup SGMII. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.Michael Chan
[ Upstream commit e2dc9b6e38fa3919e63d6d7905da70ca41cbf908 ] As a further improvement to the PF/VF link change logic, use a private mutex instead of the rtnl lock to protect link change logic. With the new mutex, we don't have to take the rtnl lock in the workqueue when we have to handle link related functions. If the VF and PF drivers are running on the same host and both take the rtnl lock and one is waiting for the other, it will cause timeout. This patch fixes these timeouts. Fixes: 90c694bb7181 ("bnxt_en: Fix RTNL lock usage on bnxt_update_link().") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net/mlx5: Fix command completion after timeout access invalid structureMoshe Shemesh
[ Upstream commit 061870800efb4e3d1ad4082a2569363629bdfcfc ] Completion on timeout should not free the driver command entry structure as it will need to access it again once real completion event from FW will occur. Fixes: 73dd3a4839c1 ('net/mlx5: Avoid using pending command interface slots') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10igb: Remove superfluous reset to PHY and page 0 selectionChristian Grönke
[ Upstream commit 2a83fba6cae89dd9c0625e68ff8ffff791c67ac0 ] This patch reverts two previous applied patches to fix an issue that appeared when using SGMII based SFP modules. In the current state the driver will try to reset the PHY before obtaining the phy_addr of the SGMII attached PHY. That leads to an error in e1000_write_phy_reg_sgmii_82575. Causing the initialization to fail: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of ????:??:??.? failed with error -3 The patches being reverted are: commit 182785335447957409282ca745aa5bc3968facee Author: Aaron Sierra <asierra@xes-inc.com> Date: Tue Nov 29 10:03:56 2016 -0600 igb: reset the PHY before reading the PHY ID commit 440aeca4b9858248d8f16d724d9fa87a4f65fa33 Author: Matwey V Kornilov <matwey@sai.msu.ru> Date: Thu Nov 24 13:32:48 2016 +0300 igb: Explicitly select page 0 at initialization The first reverted patch directly causes the problem mentioned above. In case of SGMII the phy_addr is not known at this point and will only be obtained by 'igb_get_phy_id_82575' further down in the code. The second removed patch selects forces selection of page 0 in the PHY. Something that the reset tries to address as well. As pointed out by Alexander Duzck, the patch below fixes the same issue but in the proper location: commit 4e684f59d760a2c7c716bb60190783546e2d08a1 Author: Chris J Arges <christopherarges@gmail.com> Date: Wed Nov 2 09:13:42 2016 -0500 igb: Workaround for igb i210 firmware issue Reverts: 440aeca4b9858248d8f16d724d9fa87a4f65fa33. Reverts: 182785335447957409282ca745aa5bc3968facee. Signed-off-by: Christian Grönke <c.groenke@infodas.de> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net: cxgb3_main: fix a missing-check bugWenwen Wang
[ Upstream commit 2c05d88818ab6571816b93edce4d53703870d7ae ] In cxgb_extension_ioctl(), the command of the ioctl is firstly copied from the user-space buffer 'useraddr' to 'cmd' and checked through the switch statement. If the command is not as expected, an error code EOPNOTSUPP is returned. In the following execution, i.e., the cases of the switch statement, the whole buffer of 'useraddr' is copied again to a specific data structure, according to what kind of command is requested. However, after the second copy, there is no re-check on the newly-copied command. Given that the buffer 'useraddr' is in the user space, a malicious user can race to change the command between the two copies. By doing so, the attacker can supply malicious data to the kernel and cause undefined behavior. This patch adds a re-check in each case of the switch statement if there is a second copy in that case, to re-check whether the command obtained in the second copy is the same as the one in the first copy. If not, an error code EINVAL is returned. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10declance: Fix continuation with the adapter identification messageMaciej W. Rozycki
[ Upstream commit fe3a83af6a50199bf250fa331e94216912f79395 ] Fix a commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") regression with the `declance' driver, which caused the adapter identification message to be split between two lines, e.g.: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA , addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Address that properly, by printing identification with a single call, making the messages now look like: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA, addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net: fec: fix rare tx timeoutRickard x Andersson
[ Upstream commit 657ade07df72847f591ccdb36bd9b91ed0edbac3 ] During certain heavy network loads TX could time out with TX ring dump. TX is sometimes never restarted after reaching "tx_stop_threshold" because function "fec_enet_tx_queue" only tests the first queue. In addition the TX timeout callback function failed to recover because it also operated only on the first queue. Signed-off-by: Rickard x Andersson <rickaran@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10qed: Avoid constant logical operation warning in qed_vf_pf_acquireNathan Chancellor
[ Upstream commit 1c492a9d55ba99079210ed901dd8a5423f980487 ] Clang warns when a constant is used in a boolean context as it thinks a bitwise operation may have been intended. drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!p_iov->b_pre_fp_hsi && ^ drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: use '&' for a bitwise operation if (!p_iov->b_pre_fp_hsi && ^~ & drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: remove constant to silence this warning if (!p_iov->b_pre_fp_hsi && ~^~ 1 warning generated. This has been here since commit 1fe614d10f45 ("qed: Relax VF firmware requirements") and I am not entirely sure why since 0 isn't a special case. Just remove the statement causing Clang to warn since it isn't required. Link: https://github.com/ClangBuiltLinux/linux/issues/126 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10qed: Avoid implicit enum conversion in qed_roce_mode_to_flavorNathan Chancellor
[ Upstream commit d3a315795b4ce8b105a64a90699103121bde04a8 ] Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_roce.c:153:12: warning: implicit conversion from enumeration type 'enum roce_mode' to different enumeration type 'enum roce_flavor' [-Wenum-conversion] flavor = ROCE_V2_IPV6; ~ ^~~~~~~~~~~~ drivers/net/ethernet/qlogic/qed/qed_roce.c:156:12: warning: implicit conversion from enumeration type 'enum roce_mode' to different enumeration type 'enum roce_flavor' [-Wenum-conversion] flavor = MAX_ROCE_MODE; ~ ^~~~~~~~~~~~~ 2 warnings generated. Use the appropriate values from the expected type, roce_flavor: ROCE_V2_IPV6 = RROCE_IPV6 = 2 MAX_ROCE_MODE = MAX_ROCE_FLAVOR = 3 While we're add it, ditch the local variable flavor, we can just return the value directly from the switch statement. Link: https://github.com/ClangBuiltLinux/linux/issues/125 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10net: macb: Clean 64b dma addresses if they are not detectedMichal Simek
[ Upstream commit e1e5d8a9fe737d94ccc0ccbaf0c97f69a8f3e000 ] Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is not detected on 64bit system. The issue was observed when bootloader(u-boot) does not check macb feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support by default. Then macb driver is reading DMACFG register back and only adding 64bit dma configuration but not cleaning it out. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-20net/mlx4: Use cpumask_available for eq->affinity_maskNathan Chancellor
[ Upstream commit 8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 ] Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-20ravb: do not write 1 to reserved bitsKazuya Mizuguchi
[ Upstream commit 2fe397a3959de8a472f165e6d152f64cb77fa2cc ] EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 03:37:05 +0000