| Age | Commit message (Collapse) | Author |
|---|
|
Add support for multicast filtering in HSR mode
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-6-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The HSR stack allows to offload its Tx packet duplication functionality to
the hardware. Enable this offloading feature for ICSSG driver. Add support
to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard.
hsr tag insertion offload and hsr dup offload are tightly coupled in
firmware implementation. Both these features need to be enabled / disabled
together.
Duplicate discard is done as part of RX tag removal and it is
done by the firmware. When driver sends the r30 command
ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as
duplicate discard.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-5-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for offloading HSR port-to-port frame forward to hardware.
When the slave interfaces are added to the HSR interface, the PRU cores
will be stopped and ICSSG HSR firmwares will be loaded to them.
Similarly, when HSR interface is deleted, the PRU cores will be
restarted and the last used firmwares will be reloaded. PRUeth
interfaces will be back to the last used mode.
This commit also renames some APIs that are common between switch and
hsr mode with '_fw_offload' suffix.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-4-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The def_inc is stored in icss_iep structure. Currently default increment
(ns per clock tick) is hardcoded to 4 (Clock frequency being 250 MHz).
Change this to use the iep->def_inc variable as the iep structure is now
accessible to the driver files.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move icss_iep structure definition and to icss_iep.h file so that the
structure members can be used / accessed by all icssg driver files.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-2-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we support multiple RX queues, enable default priority
to flow mapping so that higher priority packets come on higher
channels (flows).
The Classifier checks for PCP/DSCP priority in the packet and
routes them to the appropriate flow.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Policer registers in the ALE register space are just shadow registers
and use an index field in the policer table control register to read/write
to the actual Polier registers.
Add helper functions to Read and Write to Policer registers.
Also add a helper function to set the thread value to classifier/policer
mapping. Any packet that first matches the classifier will be sent to the
thread (flow) that is set in the classifier to thread mapping table.
If not set then it goes to the default flow.
Default behaviour is to have 8 classifiers to map 8 DSCP/PCP
priorities to N receive threads (flows). N depends on number of
RX channels enabled for the port.
As per the standard [1] User prioritie 1 (Background) and 2 (Spare) have
lower priority than the user priority 0 (default). User priority 1 being
of the lowest priority.
[1] IEEE802.1D-2004, IEEE Standard for Local and metropolitan area networks
Table G-2 - Traffic type acronyms
Table G-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds regfileds for Policer registers and Thread mapping/control registers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use regfields for number of ALE Entries and Policers.
The variants that support Policers/Classifiers have the number
of policers encoded in the ALE_STATUS register.
Use that and show the number of Policers in the ALE info message.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Map the entire ALE registerspace using regmap.
Add regfields for Major and Minor Version fields.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
am65-cpsw can support up to 8 queues at Rx.
Use a macro AM65_CPSW_MAX_RX_QUEUES to indicate that.
As there is only one DMA channel for RX traffic, the
8 queues come as 8 flows in that channel.
By default, we will start with 1 flow as defined by the
macro AM65_CPSW_DEFAULT_RX_CHN_FLOWS.
User can change the number of flows by ethtool like so
'ethtool -L ethx rx <N>'
All traffic will still come on flow 0. To get traffic on
different flows the Classifiers will need to be set up.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pa_stats is optional in dt bindings, make it optional in driver as well.
Currently if pa_stats syscon regmap is not found driver returns -ENODEV.
Fix this by not returning an error in case pa_stats is not found and
continue generating ethtool stats without pa_stats.
Fixes: 550ee90ac61c ("net: ti: icssg-prueth: Add support for PA Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240906093649.870883-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We are not using ndev->stats for rx_packets and rx_bytes anymore.
Instead, we use per CPU stats which are collated in
am65_cpsw_nuss_ndo_get_stats().
Fix RX statistics for XDP_TX and XDP_REDIRECT cases.
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If number of TX queues are set to 1 we get a NULL pointer
dereference during XDP_TX.
~# ethtool -L eth0 tx 1
~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2
Transmitting on eth0 (ifindex 2)
[ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
Fix this by using actual TX queues instead of max TX queues
when picking the TX channel in am65_cpsw_ndo_xdp_xmit().
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The following XDP_DROP test from [1] stalls the interface after
250 packets.
~# xdb-bench drop -m native eth0
This is because new RX requests are never queued. Fix that.
The below XDP_TX test from [1] fails with a warning
[ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom
~# xdb-bench tx -m native eth0
Fix that by using PAGE_SIZE during xdp_init_buf().
In XDP_REDIRECT case only 1 packet was processed in rx_poll.
Fix it to process up to budget packets.
Fix all XDP error cases to call trace_xdp_exception() and drop the packet
in am65_cpsw_run_xdp().
[1] xdp-tools suite https://github.com/xdp-project/xdp-tools
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/faraday/ftgmac100.c
4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible")
e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org
net/ipv4/tcp.c
bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort")
edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset")
https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au
No adjacent changes.
Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
suitable API
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822230550.708112-1-andy.shevchenko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Crash is seen on AM64x 10M link when connecting / disconnecting multiple
times.
The fix for this is to enable quirk_10m_link_issue for AM64x.
Fixes: b256e13378a9 ("net: ti: icssg-prueth: Add AM64x icssg support")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240823120412.1262536-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for dumping PA stats registers via ethtool.
Firmware maintained stats are stored at PA Stats registers.
Also modify emac_get_strings() API to use ethtool_puts().
This commit also maintains consistency between miig_stats and pa_stats by
- renaming the array icssg_all_stats to icssg_all_miig_stats
- renaming the structure icssg_stats to icssg_miig_stats
- renaming ICSSG_STATS() to ICSSG_MIIG_STATS()
- changing order of stats related data structures and arrays so that data
structures of a certain stats type is clubbed together.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240822122652.1071801-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow of_find_net_device_by_node() to find icssg_prueth ports and make
the individual ports' of_nodes available in sysfs.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240807121215.3178964-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240731191601.1714639-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
First part of "net: Make timestamping selectable" from Kory Maincent.
Change the driver-facing type already to lower rebasing pain.
Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
icssg_prueth.c and icssg_prueth_sr1.c drivers use multiple common .c
files. These common objects are getting added to multiple modules. As a
result when both drivers are enabled in .config, below warning is seen.
drivers/net/ethernet/ti/Makefile: icssg/icssg_common.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_classifier.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_config.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_mii_cfg.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_stats.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_ethtool.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
Fix this by building a new module (icssg.o) for all the common objects.
Both the driver can then depend on this common module.
Some APIs being exported have emac_ as the prefix which may result into
confusion with other existing APIs with emac_ prefix, to avoid
confusion, rename the APIs being exported with emac_ to icssg_ prefix.
This also fixes below error seen when both drivers are built.
ERROR: modpost: "icssg_queue_pop"
[drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined!
ERROR: modpost: "icssg_queue_push"
[drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined!
Reported-and-tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/oe-kbuild-all/202405182038.ncf1mL7Z-lkp@intel.com/
Fixes: 487f7323f39a ("net: ti: icssg-prueth: Add helper functions to configure FDB")
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing dependency on NET_SWITCHDEV.
Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240708-net-deps-v2-1-b22fb74da2a3@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`am654_icss_iep_regmap_config` is only assigned to a pointer that passes
the data as read-only.
Add the const modifier to the struct and pointer to move the data to a
read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240703-net-const-regmap-v1-2-ff4aeceda02c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IEP module supports compare events, in which a value is written to a
hardware register and when the IEP counter reaches the written value an
interrupt is generated. Add handling for this interrupt in order to
support PPS events.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As all sources of concurrency in hardware register access occur in
non-interrupt context eliminate spinlock-based synchronization and
rely on the mutex-based synchronization that is already present.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable PTP support for AM65x SR1.0 devices by registering with the IEP
infrastructure in order to expose a PTP clock to userspace.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the k3_udma_glue_rx_get_irq() function returns either negative
error codes or zero on error. Generally, in the kernel, zero means
success so this be confusing and has caused bugs in the past. Also the
"tx" version of this function only returns negative error codes. Let's
clean this "rx" function so both functions match.
This patch has no effect on runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add multicast filtering support for ICSSG Driver. Multicast addresses will
be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and
icssg_prueth_del_mcast() will be sync and unsync APIs for the driver
respectively.
To add a mac_address for a port, driver needs to call icssg_fdb_add_del()
and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware
will then configure the rules and allow filtering.
If a mac_address is added to port0 and the same mac_address needs to be
added for port1, driver needs to pass BIT(port0) | BIT(port1) to the
icssg_fdb_add_del() API. If driver just pass BIT(port1) then the entry for
port0 will be overwritten / lost. This is a design constraint on the
firmware side.
To overcome this in the driver, to add any mac_address for let's say portX
driver first checks if the same mac_address is already added for any other
port. If yes driver calls icssg_fdb_add_del() with BIT(portX) |
BIT(other_existing_port). If not, driver calls icssg_fdb_add_del() with
BIT(portX).
The same thing is applicable for deleting mac_addresses as well. This
logic is in icssg_prueth_add_mcast / icssg_prueth_del_mcast APIs.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for ICSSG switch firmware using existing Dual EMAC driver
with switchdev.
Limitations:
VLAN offloading is limited to 0-256 IDs.
MDB/FDB static entries are limited to 511 entries and different FDBs can
hash to same bucket and thus may not completely offloaded
Example assuming ETH1 and ETH2 as ICSSG2 interfaces:
Switch to ICSSG Switch mode:
ip link add name br0 type bridge
ip link set dev eth1 master br0
ip link set dev eth2 master br0
ip link set dev br0 up
bridge vlan add dev br0 vid 1 pvid untagged self
Going back to Dual EMAC mode:
ip link set dev br0 down
ip link set dev eth1 nomaster
ip link set dev eth2 nomaster
ip link del name br0 type bridge
By default, Dual EMAC firmware is loaded, and can be changed to switch
mode by above steps
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ICSSG can operating in switch mode with 2 ext port and 1 host port with
VLAN/FDB/MDB and STP offloading. Add switchdev based driver to
support the same.
Driver itself will be integrated with icssg_prueth in future commits
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce helper functions to configure firmware FDB tables, VLAN tables
and Port VLAN ID settings to aid adding Switch mode support.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
So that of_find_net_device_by_node() can find cpsw-nuss ports and other DSA
switches can be stacked downstream.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20240528075954.3608118-3-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename phy_node to port_np to better reflect what it actually is,
because the new phylink API takes netdev node (or DSA port node),
and resolves the phandle internally.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20240528075954.3608118-2-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The start counter for FT1 filter is wrongly set to 0 in the driver.
FT1 is used for source address violation (SAV) check and source address
starts at Byte 6 not Byte 0. Fix this by changing start counter to
ETH_ALEN in icssg_ft1_set_mac_addr().
Fixes: e9b4ece7d74b ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240527063015.263748-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error.
Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240521-icssg-prueth-fix-v1-1-b4b17b1433e9@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add SW IRQ coalescing based on hrtimers for RX and TX data path for ICSSG
driver, which can be enabled by ethtool commands:
- RX coalescing
ethtool -C eth1 rx-usecs 50
- TX coalescing can be enabled per TX queue
- by default enables coalescing for TX0
ethtool -C eth1 tx-usecs 50
- configure TX0
ethtool -Q eth0 queue_mask 1 --coalesce tx-usecs 100
- configure TX1
ethtool -Q eth0 queue_mask 2 --coalesce tx-usecs 100
- configure TX0 and TX1
ethtool -Q eth0 queue_mask 3 --coalesce tx-usecs 100 --coalesce
tx-usecs 100
Minimum value for both rx-usecs and tx-usecs is 20us.
Compared to gro_flush_timeout and napi_defer_hard_irqs this patch allows
to enable IRQ coalescing for RX path separately.
Benchmarking numbers:
===============================================================
| Method | Tput_TX | CPU_TX | Tput_RX | CPU_RX |
| ==============================================================
| Default Driver 943 Mbps 31% 517 Mbps 38% |
| IRQ Coalescing (Patch) 943 Mbps 28% 518 Mbps 25% |
===============================================================
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430120634.1558998-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the base-time for taprio is in the past, start the schedule at the time
of the form "base_time + N*cycle_time" where N is the smallest possible
integer such that the above time is in the future.
Signed-off-by: Tanmay Patil <t-patil@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.)
field from the second nibble of the PTP header which is defined in the
PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification
the first two bytes of the PTP header are defined as the versionType
which is always 0x0001. This means that any PTPv1 packets that are
tagged for TX timestamping by the CPTS will have their messageType set
to 0x0 which corresponds to a Sync message type. This causes issues
when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1)
timestamp that never appears.
Fix this by checking if the ptp_class of the timestamped TX packet is
PTP_CLASS_V1 and then matching the PTP sequence ID to the stored
sequence ID in the skb->cb data structure. If the sequence IDs match
and the packet is of type PTPv1 then there is a chance that the
messageType has been incorrectly stored by the CPTS so overwrite the
messageType stored by the CPTS with the messageType from the skb->cb
data structure. This allows the PTPv1 stack to receive TX timestamps
for Delay_Req packets which are necessary to lock onto a PTP Leader.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Tested-by: Ed Trexel <ed.trexel@hp.com>
Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver")
Link: https://lore.kernel.org/r/20240424071626.32558-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rx_chn->irq[] array is unsigned int but it should be signed for the
error handling to work. Also if k3_udma_glue_rx_get_irq() returns zero
then we should return -ENXIO instead of success.
Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/05282415-e7f4-42f3-99f8-32fde8f30936@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
