| Age | Commit message (Collapse) | Author |
|---|
|
A 'foreign' rule is one for which the net_dev is not the sfc netdevice
or any of its representors. The driver registers indirect flow blocks
for tunnel netdevs so that it can offload decap rules. For example:
tc filter add dev vxlan0 parent ffff: protocol ipv4 flower \
enc_src_ip 10.1.0.2 enc_dst_ip 10.1.0.1 \
enc_key_id 1000 enc_dst_port 4789 \
action tunnel_key unset \
action mirred egress redirect dev $REPRESENTOR
When notified of a rule like this, register an encap match on the IP
and dport tuple (creating an Outer Rule table entry) and insert an MAE
action rule to perform the decapsulation and deliver to the representee.
Moved efx_tc_delete_rule() below efx_tc_flower_release_encap_match() to
avoid the need for a forward declaration.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a hashtable to detect duplicate and conflicting matches. If match
is not a duplicate, call MAE functions to add/remove it from OR table.
Calling code not added yet, so mark the new functions as unused.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An encap match corresponds to an entry in the exact-match Outer Rule
table; the lookup response includes the encap type (protocol) allowing
the hardware to continue parsing into the inner headers.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the MAE caps check to validate that the hardware supports these
outer-header matches where used by the driver.
Extend efx_mae_populate_match_criteria() to fill in the outer rule ID
and VNI match fields.
Nothing yet populates these match fields, nor creates outer rules.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
EF100 can pop and/or push up to two VLAN tags.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309115904.56442-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The only actions that expect stats (that sfc HW supports) are gact shot
(drop), mirred redirect and mirred mirror. Since these are 'deliverish'
actions that end an action-set, we only require at most one counter per
action-set.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nothing populates them yet.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently there is no counter-allocating machinery to connect the
resulting counter update values to; that will be added in a
subsequent patch.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Start and stop MAE counter streaming, and grant credits.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support matching on UDP/TCP source and destination ports and TCP flags,
with masking if supported by the hardware.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support matching on ip_frag and ip_firstfrag.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support matching on IP protocol, Type of Service, Time To Live, source
and destination addresses, with masking if supported by the hardware.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support matching on EtherType, VLANs and ethernet source/destination
addresses, with masking if supported by the hardware.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since we can now get a formatted message back to the user with
NL_SET_ERR_MSG_FMT_MOD(), there's no need for our special logging.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is the absolute minimum viable TC implementation to get traffic to
VFs and allow them to be tested; it supports no match fields besides
ingress port, no actions besides mirred and drop, and no stats.
Example usage:
tc filter add dev $PF parent ffff: flower skip_sw \
action mirred egress mirror dev $VFREP
tc filter add dev $VFREP parent ffff: flower skip_sw \
action mirred egress redirect dev $PF
gives a VF unfiltered access to the network out the physical port ($PF
acts here as a physical port representor).
More matches, actions, and counters will be added in subsequent patches.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different versions of EF100 firmware and FPGA bitstreams support different
matching capabilities in the Match-Action Engine. Probe for these at
start of day; subsequent patches will validate TC offload requests
against the reported capabilities.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nothing inserts into this table yet, but we have code to remove rules
on FLOW_CLS_DESTROY or at driver teardown time, in both cases also
attempting to remove the corresponding hardware rules.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TC offload support will involve complex limitations on what matches and
actions a rule can do, in some cases potentially depending on rules
already offloaded. So add an ethtool private flag "log-tc-errors" which
controls reporting the reasons for un-offloadable TC rules at NETIF_INFO.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bind direct blocks for the MAE-admin PF and each VF representor.
Currently these connect to a stub efx_tc_flower() that only returns
-EOPNOTSUPP; subsequent patches will implement flower offloads to the
Match-Action Engine.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Representors do not want to be subject to the PF's Ethernet address
filters, since traffic from VFs will typically have a destination
either elsewhere on the link segment or on an overlay network.
So, create a dynamic m-port with promiscuous and all-multicast
filters, and set it as the egress port of representor default rules.
Since the m-port is an alias of the calling PF's own m-port, traffic
will still be delivered to the PF's RXQs, but it will be subject to
the VNRX filter rules installed on the dynamic m-port (specified by
the v-port ID field of the filter spec).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Default rules are low-priority switching rules which the hardware uses
in the absence of higher-priority rules. Each representor requires a
corresponding rule matching traffic from its representee VF and
delivering to the PF (where a check on INGRESS_MPORT in
__ef100_rx_packet() will direct it to the representor). No rule is
required in the reverse direction, because representor TX uses a TX
override descriptor to bypass the MAE and deliver directly to the VF.
Since inserting any rule into the MAE disables the firmware's own
default rules, also insert a pair of rules to connect the PF to the
physical network port and vice-versa.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
