summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/realtek
AgeCommit message (Collapse)Author
2025-07-06r8169: add support for RTL8125DHeiner Kallweit
commit f75d1fbe7809bc5ed134204b920fd9e2fc5db1df upstream. This adds support for new chip version RTL8125D, which can be found on boards like Gigabyte X870E AORUS ELITE WIFI7. Firmware rtl8125d-1.fw for this chip version is available in linux-firmware already. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/d0306912-e88e-4c25-8b5d-545ae8834c0c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-29r8169: don't scan PHY addresses > 0Heiner Kallweit
[ Upstream commit faac69a4ae5abb49e62c79c66b51bb905c9aa5ec ] The PHY address is a dummy, because r8169 PHY access registers don't support a PHY address. Therefore scan address 0 only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/830637dd-4016-4a68-92b3-618fcac6589d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29r8169: disable RTL8126 ZRX-DC timeoutChunHao Lin
[ Upstream commit b48688ea3c9ac8d5d910c6e91fb7f80d846581f0 ] Disable it due to it dose not meet ZRX-DC specification. If it is enabled, device will exit L1 substate every 100ms. Disable it for saving more power in L1 substate. Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20250318083721.4127-3-hau@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09rtase: Modify the condition used to detect overflow in ↵Justin Lai
rtase_calc_time_mitigation [ Upstream commit 68f9d8974b545668e1be2422240b25a92e304b14 ] Fix the following compile error reported by the kernel test robot by modifying the condition used to detect overflow in rtase_calc_time_mitigation. In file included from include/linux/mdio.h:10:0, from drivers/net/ethernet/realtek/rtase/rtase_main.c:58: In function 'u16_encode_bits', inlined from 'rtase_calc_time_mitigation.constprop' at drivers/net/ ethernet/realtek/rtase/rtase_main.c:1915:13, inlined from 'rtase_init_software_variable.isra.41' at drivers/net/ ethernet/realtek/rtase/rtase_main.c:1961:13, inlined from 'rtase_init_one' at drivers/net/ethernet/realtek/ rtase/rtase_main.c:2111:2: >> include/linux/bitfield.h:178:3: error: call to '__field_overflow' declared with attribute error: value doesn't fit into mask __field_overflow(); \ ^~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:198:2: note: in expansion of macro '____MAKE_OP' ____MAKE_OP(u##size,u##size,,) ^~~~~~~~~~~ include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP' __MAKE_OP(16) ^~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503182158.nkAlbJWX-lkp@intel.com/ Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250424040444.5530-1-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22rtase: Fix improper release of ring list entries in rtase_sw_resetJustin Lai
[ Upstream commit 415f135ace7fd824cde083184a922e39156055b5 ] Since rtase_init_ring, which is called within rtase_sw_reset, adds ring entries already present in the ring list back into the list, it causes the ring list to form a cycle. This results in list_for_each_entry_safe failing to find an endpoint during traversal, leading to an error. Therefore, it is necessary to remove the previously added ring_list nodes before calling rtase_init_ring. Fixes: 079600489960 ("rtase: Implement net_device_ops") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306070510.18129-1-justinlai0215@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-17rtase: Fix a check for error in rtase_alloc_msix()Dan Carpenter
[ Upstream commit 2055272e3ae01a954e41a5afb437c5d76f758e0b ] The pci_irq_vector() function never returns zero. It returns negative error codes or a positive non-zero IRQ number. Fix the error checking to test for negatives. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/f2ecc88d-af13-4651-9820-7cc665230019@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14r8169: don't apply UDP padding quirk on RTL8126AHeiner Kallweit
[ Upstream commit 87e26448dbda4523b73a894d96f0f788506d3795 ] Vendor drivers r8125/r8126 indicate that this quirk isn't needed any longer for RTL8126A. Mimic this in r8169. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/d1317187-aa81-4a69-b831-678436e4de62@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05rtase: Corrects error handling of the rtase_check_mac_version_valid()Justin Lai
[ Upstream commit a01cfcfda5cc787552b344cbc92f9c363c81ad4f ] Previously, when the hardware version ID was determined to be invalid, only an error message was printed without any further handling. Therefore, this patch makes the necessary corrections to address this. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05rtase: Correct the speed for RTL907XD-V1Justin Lai
[ Upstream commit c1fc14c4df801fe2d9ec3160b52fa63569ce164c ] Previously, the reported speed was uniformly set to SPEED_5000, but the RTL907XD-V1 actually operates at a speed of SPEED_10000. Therefore, this patch makes the necessary correction. Fixes: dd7f17c40fd1 ("rtase: Implement ethtool function") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05rtase: Refactor the rtase_check_mac_version_valid() functionJustin Lai
[ Upstream commit a1f8609ff1f658e410f78d800ca947d57e51996a ] Different hardware requires different configurations, but this distinction was not made previously. Additionally, the error message was not clear enough. Therefore, this patch will address the issues mentioned above. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-23r8169: avoid unsolicited interruptsHeiner Kallweit
It was reported that after resume from suspend a PCI error is logged and connectivity is broken. Error message is: PCI error (cmd = 0x0407, status_errs = 0x0000) The message seems to be a red herring as none of the error bits is set, and the PCI command register value also is normal. Exception handling for a PCI error includes a chip reset what apparently brakes connectivity here. The interrupt status bit triggering the PCI error handling isn't actually used on PCIe chip versions, so it's not clear why this bit is set by the chip. Fix this by ignoring this bit on PCIe chip versions. Fixes: 0e4851502f84 ("r8169: merge with version 8.001.00 of Realtek's r8168 driver") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388 Tested-by: Atlas Yu <atlas.yu@canonical.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-24r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.bHeiner Kallweit
Add a missing MODULE_FIRMWARE entry. Fixes: 69cb89981c7a ("r8169: add support for RTL8126A rev.b") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/bb307611-d129-43f5-a7ff-bdb6b4044fce@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-24r8169: add tally counter fields added with RTL8125Heiner Kallweit
RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/741d26a9-2b2b-485d-91d9-ecb302e345b5@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.12 net-next PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13rtase: Fix error code in rtase_init_board()Dan Carpenter
Return an error if dma_set_mask_and_coherent() fails. Don't return success. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13r8169: disable ALDPS per default for RTL8125Heiner Kallweit
En-Wei reported that traffic breaks if cable is unplugged for more than 3s and then re-plugged. This was supposed to be fixed by 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125"). But apparently this didn't fix the issue for everybody. The 3s threshold rang a bell, as this is the delay after which ALDPS kicks in. And indeed disabling ALDPS fixes the issue for this user. Maybe this fixes the issue in general. In a follow-up step we could remove the first fix attempt and see whether anybody complains. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Tested-by: En-Wei WU <en-wei.wu@canonical.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10rtase: Fix spelling mistake: "tx_underun" -> "tx_underrun"Colin Ian King
There is a spelling mistake in the struct field tx_underun, rename it to tx_underrun. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909134612.63912-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10r8169: Fix spelling mistake: "tx_underun" -> "tx_underrun"Colin Ian King
There is a spelling mistake in the struct field tx_underun, rename it to tx_underrun. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20240909140021.64884-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05realtek: Update the Makefile and Kconfig in the realtek folderJustin Lai
1. Add the RTASE entry in the Kconfig. 2. Add the CONFIG_RTASE entry in the Makefile. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-13-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Add a Makefile in the rtase folderJustin Lai
Add a Makefile in the rtase folder to build rtase driver. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-12-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement ethtool functionJustin Lai
Implement the ethtool function to support users to obtain network card information, including obtaining various device settings, Report whether physical link is up, Report pause parameters, Set pause parameters, Return extended statistics about the device. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-11-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement pci_driver suspend and resume functionJustin Lai
Implement the pci_driver suspend function to enable the device to sleep, and implement the resume function to enable the device to resume operation. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-10-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement net_device_opsJustin Lai
1. Implement .ndo_set_rx_mode so that the device can change address list filtering. 2. Implement .ndo_set_mac_address so that mac address can be changed. 3. Implement .ndo_change_mtu so that mtu can be changed. 4. Implement .ndo_tx_timeout to perform related processing when the transmitter does not make any progress. 5. Implement .ndo_get_stats64 to provide statistics that are called when the user wants to get network device usage. 6. Implement .ndo_vlan_rx_add_vid to register VLAN ID when the device supports VLAN filtering. 7. Implement .ndo_vlan_rx_kill_vid to unregister VLAN ID when the device supports VLAN filtering. 8. Implement the .ndo_setup_tc to enable setting any "tc" scheduler, classifier or action on dev. 9. Implement .ndo_fix_features enables adjusting requested feature flags based on device-specific constraints. 10. Implement .ndo_set_features enables updating device configuration to new features. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-9-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement a function to receive packetsJustin Lai
Implement rx_handler to read the information of the rx descriptor, thereby checking the packet accordingly and storing the packet in the socket buffer to complete the reception of the packet. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-8-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement .ndo_start_xmit functionJustin Lai
Implement .ndo_start_xmit function to fill the information of the packet to be transmitted into the tx descriptor, and then the hardware will transmit the packet using the information in the tx descriptor. In addition, we also implemented the tx_handler function to enable the tx descriptor to be reused. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-7-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement hardware configuration functionJustin Lai
Implement rtase_hw_config to set default hardware settings, including setting interrupt mitigation, tx/rx DMA burst, interframe gap time, rx packet filter, near fifo threshold and fill descriptor ring and tally counter address, and enable flow control. When filling the rx descriptor ring, the first group of queues needs to be processed separately because the positions of the first group of queues are not regular with other subsequent groups. The other queues are all newly added features, but we want to retain the original design. So they were not put together. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-6-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement the interrupt routine and rtase_pollJustin Lai
1. Implement rtase_interrupt to handle txQ0/rxQ0, txQ4~txQ7 interrupts, and implement rtase_q_interrupt to handle txQ1/rxQ1, txQ2/rxQ2 and txQ3/rxQ3 interrupts. 2. Implement rtase_poll to call ring_handler to process the tx or rx packet of each ring. If the returned value is budget,it means that there is still work of a certain ring that has not yet been completed. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-5-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement the rtase_down functionJustin Lai
Implement the rtase_down function to disable hardware setting and interrupt and clear descriptor ring. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-4-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Implement the .ndo_open functionJustin Lai
Implement the .ndo_open function to set default hardware settings and initialize the descriptor ring and interrupts. Among them, when requesting interrupt, because the first group of interrupts needs to process more events, the overall structure and interrupt handler will be different from other groups of interrupts, so it needs to be handled separately. The first set of interrupt handlers need to handle the interrupt status of RXQ0 and TXQ0, TXQ4~7, while other groups of interrupt handlers will handle the interrupt status of RXQ1&TXQ1 or RXQ2&TXQ2 or RXQ3&TXQ3 according to the interrupt vector. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-3-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05rtase: Add support for a pci table in this moduleJustin Lai
Add support for a pci table in this module, and implement pci_driver function to initialize this driver, remove this driver, or shutdown this driver. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-2-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-02r8169: add support for RTL8126A rev.bChunHao Lin
Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically based on the one with XID 0x649, but with different firmware file. Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20240830021810.11993-1-hau@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-31r8169: don't increment tx_dropped in case of NETDEV_TX_BUSYHeiner Kallweit
The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't increment the tx_dropped counter. Fixes: 188f4af04618 ("r8169: use NETDEV_TX_{BUSY/OK}") Cc: stable@vger.kernel.org Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/bbba9c48-8bac-4932-9aa1-d2ed63bc9433@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-28net: move ethtool-related netdev state into its own structEdward Cree
net_dev->ethtool is a pointer to new struct ethtool_netdev_state, which currently contains only the wol_enabled field. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/293a562278371de7534ed1eb17531838ca090633.1719502239.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-28r8169: remove detection of chip version 11 (early RTL8168b)Heiner Kallweit
This early RTL8168b version was the first PCIe chip version, and it's quite quirky. Last sign of life is from more than 15 yrs ago. Let's remove detection of this chip version, we'll see whether anybody complains. If not, support for this chip version can be removed a few kernel versions later. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/875cdcf4-843c-420a-ad5d-417447b68572@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-28r8169: disable interrupt source RxOverflowHeiner Kallweit
Vendor driver calls this bit RxDescUnavail. All we do in the interrupt handler in this case is scheduling NAPI. If we should be out of RX descriptors, then NAPI is scheduled anyway. Therefore remove this interrupt source. Tested on RTL8168h. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/9b2054b2-0548-4f48-bf91-b646572093b4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-23Merge tag 'net-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Quite smaller than usual. Notably it includes the fix for the unix regression from the past weeks. The TCP window fix will require some follow-up, already queued. Current release - regressions: - af_unix: fix garbage collection of embryos Previous releases - regressions: - af_unix: fix race between GC and receive path - ipv6: sr: fix missing sk_buff release in seg6_input_core - tcp: remove 64 KByte limit for initial tp->rcv_wnd value - eth: r8169: fix rx hangup - eth: lan966x: remove ptp traps in case the ptp is not enabled - eth: ixgbe: fix link breakage vs cisco switches - eth: ice: prevent ethtool from corrupting the channels Previous releases - always broken: - openvswitch: set the skbuff pkt_type for proper pmtud support - tcp: Fix shift-out-of-bounds in dctcp_update_alpha() Misc: - a bunch of selftests stabilization patches" * tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits) r8169: Fix possible ring buffer corruption on fragmented Tx packets. idpf: Interpret .set_channels() input differently ice: Interpret .set_channels() input differently nfc: nci: Fix handling of zero-length payload packets in nci_rx_work() net: relax socket state check at accept time. tcp: remove 64 KByte limit for initial tp->rcv_wnd value net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() tls: fix missing memory barrier in tls_init net: fec: avoid lock evasion when reading pps_enable Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI" testing: net-drv: use stats64 for testing net: mana: Fix the extra HZ in mana_hwc_send_request net: lan966x: Remove ptp traps in case the ptp is not enabled. openvswitch: Set the skbuff pkt_type for proper pmtud support. selftest: af_unix: Make SCM_RIGHTS into OOB data. af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). selftests/net: use tc rule to filter the na packet ipv6: sr: fix memleak in seg6_hmac_init_algo af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock. ...
2024-05-23r8169: Fix possible ring buffer corruption on fragmented Tx packets.Ken Milmore
An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied. Fixes: 9020845fb5d6 ("r8169: improve rtl8169_start_xmit") Cc: stable@vger.kernel.org Signed-off-by: Ken Milmore <ken.milmore@gmail.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/27ead18b-c23d-4f49-a020-1fc482c5ac95@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-21Revert "r8169: don't try to disable interrupts if NAPI is, scheduled already"Heiner Kallweit
This reverts commit 7274c4147afbf46f45b8501edbdad6da8cd013b9. Ken reported that RTL8125b can lock up if gro_flush_timeout has the default value of 20000 and napi_defer_hard_irqs is set to 0. In this scenario device interrupts aren't disabled, what seems to trigger some silicon bug under heavy load. I was able to reproduce this behavior on RTL8168h. Fix this by reverting 7274c4147afb. Fixes: 7274c4147afb ("r8169: don't try to disable interrupts if NAPI is scheduled already") Cc: stable@vger.kernel.org Reported-by: Ken Milmore <ken.milmore@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/9b5b6f4c-4f54-4b90-b0b3-8d8023c2e780@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-18-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
2024-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/unix/garbage.c 47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c faa12ca24558 ("bnxt_en: Reset PTP tx_avail after possible firmware reset") b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()") drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c 7ac10c7d728d ("bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()") 194fad5b2781 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions") drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 958f56e48385 ("net/mlx5e: Un-expose functions in en.h") 49e6c9387051 ("net/mlx5e: RSS, Block XOR hash with over 128 channels") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10r8169: add missing conditional compiling for call to r8169_remove_ledsHeiner Kallweit
Add missing dependency on CONFIG_R8169_LEDS. As-is a link error occurs if config option CONFIG_R8169_LEDS isn't enabled. Fixes: 19fa4f2a85d7 ("r8169: fix LED-related deadlock on module removal") Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-By: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/d080038c-eb6b-45ac-9237-b8c1cdd7870f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10r8169: fix LED-related deadlock on module removalHeiner Kallweit
Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case. Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101") Cc: stable@vger.kernel.org Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08r8169: add support for RTL8168MHeiner Kallweit
A user reported an unknown chip version. According to the r8168 vendor driver it's called RTL8168M, but handling is identical to RTL8168H. So let's simply treat it as RTL8168H. Tested-by: Евгений <octobergun@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-02r8169: fix issue caused by buggy BIOS on certain boards with RTL8168dHeiner Kallweit
On some boards with this chip version the BIOS is buggy and misses to reset the PHY page selector. This results in the PHY ID read accessing registers on a different page, returning a more or less random value. Fix this by resetting the page selector first. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/64f2055e-98b8-45ec-8568-665e3d54d4e6@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29r8169: skip DASH fw status checks when DASH is disabledAtlas Yu
On devices that support DASH, the current code in the "rtl_loop_wait" function raises false alarms when DASH is disabled. This occurs because the function attempts to wait for the DASH firmware to be ready, even though it's not relevant in this case. r8169 0000:0c:00.0 eth0: RTL8168ep/8111ep, 38:7c:76:49:08:d9, XID 502, IRQ 86 r8169 0000:0c:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] r8169 0000:0c:00.0 eth0: DASH disabled ... r8169 0000:0c:00.0 eth0: rtl_ep_ocp_read_cond == 0 (loop: 30, delay: 10000). This patch modifies the driver start/stop functions to skip checking the DASH firmware status when DASH is explicitly disabled. This prevents unnecessary delays and false alarms. The patch has been tested on several ThinkStation P8/PX workstations. Fixes: 0ab0c45d8aae ("r8169: add handling DASH when DASH is disabled") Signed-off-by: Atlas Yu <atlas.yu@canonical.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20240328055152.18443-1-atlas.yu@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11r8169: switch to new function phy_support_eeeHeiner Kallweit
Switch to new function phy_support_eee. This allows to simplify the code because data->tx_lpi_enabled is now populated by phy_ethtool_get_eee(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/92462328-5c9b-4d82-9ce4-ea974cda4900@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-20r8169: add MODULE_FIRMWARE entry for RTL8126AHeiner Kallweit
Add the missing MODULE_FIRMWARE entry for RTL8126A. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/47ef79d2-59c4-4d44-9595-366c70c4ad87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 00:43:43 +0000