summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)Author
2016-08-22qed*: Add support for VFs over legacy PFsYuval Mintz
Modern VFs can't run on old non-compatible as the fastpath HSI is slightly changed - but as the HSI is actually very close [basically, a single bit whose meaning flipped] this can be supported with small modifications. The major differences would be in: - Recognizing that VF is running on top of a legacy PF. - Returning some slowpath configurations that are no longer needed on top of modern PFs, but would be required when working over the legacy ones. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22qed: Prevent VFs from pause floodingYuval Mintz
Firmware would silently drop any control frame sent by VF to prevent a malicious VF from generating pause flood in the network. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22qed: Add support for legacy VFsYuval Mintz
The 8.10.x FW added support for forward compatability as well as 'future' backward compatibility, but only to those VFs that were using HSI which was 8.10.x based or newer. The latest firmware now supports backward compatibility for the older VFs based on 8.7.x and 8.8.x firmware as well. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22qed: FLR of active VFs might lead to FW assertYuval Mintz
Driver never bothered marking the VF's vport with the VF's sw_fid. As a result, FLR flows are not going to clean those vports. If the vport was active when FLRed, re-activating it would lead to a FW assertion. Fixes: dacd88d6f6851 ("qed: IOV l2 functionality") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19qed: utilize FW 8.10.10.0Yuval Mintz
This new firmware for the qed* adpaters fixes several issues: - Better blocking of malicious VFs. - After FLR, Tx-switching [internal routing] of packets might be incorrect. - Deletion of unicast MAC filters would sometime have side-effect of corrupting the MAC filters configred for a device. It also contains fixes for future qed* drivers that *hopefully* would be sent for review in the near future. In addition, it would allow driver some new functionality, including: - Allowing PF/VF driver compaitibility with old drivers [running pre-8.10.5.0 firmware]. - Better debug facilities. This would also bump the qed* driver versions to 8.10.9.20. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qede: Fix forcing high speedsYuval Mintz
While '0xdead' and '0xbeef' are "great" values, we should use the correct SPEED_* values instead. Fixes: 054c67d1c82a ("qed*: Add support for ethtool link_ksettings callbacks") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qed*: Fix pause settingYuval Mintz
When moving into using ethtool's link_ksetting, qed started supplying its own bitmask of speed/capabilities, but qede is still checking for the SUPPORTED value to determine whether it supports pause. Fixes: 054c67d1c82a ("qed*: Add support for ethtool link_ksettings callbacks") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qede: Fix Tx timeout due to xmit_moreYuval Mintz
Driver uses netif_tx_queue_stopped() to make sure the xmit_more indication will be honored, but that only checks for DRV_XOFF. At the same time, it's possible that during transmission the DQL will close the transmission queue with STACK_XOFF indication. In re-configuration flows, when the threshold is relatively low, it's possible that the device has no pending tranmissions, and during tranmission the driver would miss doorbelling the HW. Since there are no pending transmission, there will never be a Tx completion [and thus the DQL would not remove the STACK_XOFF indication], eventually causing the Tx queue to timeout. While we're at it - also doorbell in case driver has to close the transmission queue on its own [although this one is less important - if the ring is full, we're bound to receive completion eventually, which means the doorbell would only be postponed and not indefinetly blocked]. Fixes: 312e06761c99 ("qede: Utilize xmit_more") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qed: Add support for NCSI statistics.Sudarsana Reddy Kalluru
The patch adds driver support for sending the NCSI statistics to the MFW. This is an asynchronous request from MFW. Upon receiving this, driver populates the required data and send it to MFW. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qede: Add support for per-queue stats.Sudarsana Reddy Kalluru
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qede: Add support for capturing additional stats in ethtool-stats display.Sudarsana Reddy Kalluru
The patch adds driver support for capturing stats ttl0_discard and packet_too_big_discard in "ethtool -S" display. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes for both merge conflicts. Resolution work done by Stephen Rothwell was used as a reference. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Add and modify some printsYuval Mintz
This patch touches various prints in the driver - it reduces the verbosity of some prints [which were previously logged by default] while adding several new debug prints and modifying others. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Trivial modificationsYuval Mintz
Change qed* code in trivial manner; This isn't necessarily semantic-only, but the end result is the same, i.e., no change should occur from user perspective. Changes include: - Using temporary variables to better fit 80-character restrictions. - Removal of unused variables & code with no effect. [plus some additional minor modifications]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Semantic changesYuval Mintz
Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14qed: Fix possible memory leak in qed_dcbnl_get_ieee_pfc()Wei Yongjun
'dcbx_info is malloced in qed_dcbnl_get_ieee_pfc() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: a1d8d8a51e83 ("qed: Add dcbnl support.") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10qed*: Add support for ethtool link_ksettings callbacks.Sudarsana Reddy Kalluru
This patch adds the driver implementation for ethtool link_ksettings callbacks. qed driver now defines/uses the qed specific masks for representing link capability values. qede driver maps these values to to new link modes defined by the kernel implementation of link_ksettings. Please consider applying this to 'net-next' branch. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Update app count when adding a new dcbx app entry to the table.Sudarsana Reddy Kalluru
App count is not updated while adding new app entry to the dcbx app table. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Add dcbx app support for IEEE Selection Field.Sudarsana Reddy Kalluru
MFW now supports the Selection field for IEEE mode. Add driver changes to use the newer MFW masks to read/write the port-id value. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Use ieee mfw-mask to get ethtype in ieee-dcbx mode.Sudarsana Reddy Kalluru
Ethtype value is being read incorrectly in ieee-dcbx mode. Use the correct mfw mask value. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Remove the endian-ness conversion for pri_to_tc value.Sudarsana Reddy Kalluru
Endian-ness conversion is not needed for priority-to-TC field as the field is already being read/written by the driver in big-endian way. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Use DEFINE_SPINLOCK() for spinlockWei Yongjun
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: Update version to 5.3.65Manish Chopra
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix napi budget alterationManish Chopra
Driver modifies the supplied NAPI budget in qlcnic_83xx_msix_tx_poll() function. Instead, it should use the budget as it is. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix data structure corruption in async mbx command handlingManish Chopra
This patch fixes a data structure corruption bug in the SRIOV VF mailbox handler code. While handling mailbox commands from the atomic context, driver is accessing and updating qlcnic_async_work_list_struct entry fields in the async work list. These fields could be concurrently accessed by the work function resulting in data corruption. This patch restructures async mbx command handling by using a separate async command list instead of using a list of work_struct structures. A single work_struct is used to schedule and handle the async commands with proper locking mechanism. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01qed: Fail driver load in 100g MSI mode.Sudarsana Reddy Kalluru
100g support is not available in MSI mode. Failing the driver load in this scenario. Please consider applying this to `net'. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01qed: Fix error return code in qed_resc_alloc()Wei Yongjun
Fix to return error code -EINVAL instead of 0 when EQ elements is too larger, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: qlcnic: avoid superfluous assignementxypron.glpk@gmx.de
Assigning NULL to parmeter dcb has no effect outside of the inlined function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01qed: do not use unitialized variablexypron.glpk@gmx.de
Do not write random bytes from the kernel stack when calling qed_wr. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: qlge: remove superfluous statementxypron.glpk@gmx.de
Variable length is not used after the deleted line. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30qed: Prevent over-usage of vlan credits by PFYuval Mintz
Each PF/VF has a limited number of vlan filters for configuration purposes; This information is passed to qede and is used to prevent over-usage - once a vlan is to be configured and no filter credit is available, the driver would switch into working in vlan-promisc mode. Problem is the credit pool is shared by both PFs and VFs, and currently PFs aren't deducting the filters that are reserved for their VFs from their quota, which may lead to some vlan filters failing unknowingly due to lack of credit. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30qed: Correct min bandwidth for 100gYuval Mintz
Driver uses reverse logic when checking if minimum bandwidth configuration applied, causing it to configure the guarantee only on the first hw-function. Fixes: a0d26d5a4fc8 ("qed*: Don't reset statistics on inner reload") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30qede: Reset statistics on explicit downYuval Mintz
Adding the necessary logic to prevet statistics reset on inner-reload introduced a bug, and now statistics are reset only when re-probing the driver. Fixes: a0d26d5a4fc8e ("qed*: Don't reset statistics on inner reload") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30qed: Don't over-do producer cleanup for RxYuval Mintz
Before requesting the firmware to start Rx queues, driver goes and sets the queue producer in the device to 0. But while the producer is 32-bit, the driver currently clears 64 bits, effectively zeroing an additional CID's producer as well. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30qed: Fix removal of spoof checking for VFsYuval Mintz
Driver has reverse logic for checking the result of the spoof-checking configuration. As a result, it would log that the configuration failed [even though it succeeded], and will no longer do anything when requested to remove the configuration, as it's accounting of the feature will be incorrect. Fixes: 6ddc7608258d5 ("qed*: IOV support spoof-checking") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30qede: Don't try removing unconfigured vlansYuval Mintz
As part of ndo_vlan_rx_kill_vid() implementation, qede is requesting firmware to remove the vlan filter. This currently happens even if the vlan wasn't previously added [In case device ran out of vlan credits]. For PFs this doesn't cause any issues as the firmware would simply ignore the removal request. But for VFs their parent PF is holding an accounting of the configured vlans, and such a request would cause the PF to fail the VF's removal request. Simply fix this for both PFs & VFs and don't remove filters that were not previously added. Fixes: 7c1bfcad9f3c8 ("qede: Add vlan filtering offload support") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25qed: Fix setting/clearing bit in completion bitmapManish Chopra
Slowpath completion handling is incorrectly changing SPQ_RING_SIZE bits instead of a single one. Fixes: 76a9a3642a0b ("qed: fix handling of concurrent ramrods") Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en.h drivers/net/ethernet/mellanox/mlx5/core/en_main.c drivers/net/usb/r8152.c All three conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qede: Bump up driver version to 8.10.1.20Manish Chopra
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qede: Add get/set rx copy break tunable supportManish Chopra
Signed-off-by: Manish <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qede: Utilize xmit_moreManish Chopra
This patch uses xmit_more optimization to reduce number of TX doorbells write per packet. Signed-off-by: Manish <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qede: qede_poll refactoringManish Chopra
This patch cleanups qede_poll() routine a bit and allows qede_poll() to do single iteration to handle TX completion [As under heavy TX load qede_poll() might run for indefinite time in the while(1) loop for TX completion processing and cause CPU stuck]. Signed-off-by: Manish <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qede: Add support for handling IP fragmented packets.Manish Chopra
When handling IP fragmented packets with csum in their transport header, the csum isn't changed as part of the fragmentation. As a result, the packet containing the transport headers would have the correct csum of the original packet, but one that mismatches the actual packet that passes on the wire. As a result, on receive path HW would give an indication that the packet has incorrect csum, which would cause qede to discard the incoming packet. Since HW also delivers a notification of IP fragments, change driver behavior to pass such incoming packets to stack and let it make the decision whether it needs to be dropped. Signed-off-by: Manish <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qlcnic: add wmb() call in transmit data path.Sony Chacko
Call wmb() to ensure writes are complete before hardware fetches updated Tx descriptors. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29qed: Protect the doorbell BAR with the write barriers.Sudarsana Reddy Kalluru
SPQ doorbell is currently protected with the compilation barrier. Under the stress scenarios, we may get into a state where (due to the weak ordering) several ramrod doorbells were written to the BAR with an out-of-order producer values. Need to change the barrier type to a write barrier to make sure that the write buffer is flushed after each doorbell. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29qede: Fix the static checker warnings.Sudarsana Reddy Kalluru
Static checker warnings: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:435 qede_get_coalesce() warn: passing casted pointer '&coal->rx_coalesce_usecs' to 'edev->ops->common->get_coalesce()' 32 vs 16. The u32 pointer is being typecasted to u16 which may fail for big-endian platforms. Fixes: d552fa84cb35 ("qede: Add support for coalescing config read/update.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29qed: Fix static checker warnings.Sudarsana Reddy Kalluru
Static checker warnings: drivers/net/ethernet/qlogic/qed/qed_int.c:2450 qed_init_cau_sb_entry() warn: always true condition '(cdev->rx_coalesce_usecs <= 255) => (0-255 <= 255)' drivers/net/ethernet/qlogic/qed/qed_int.c:2511 qed_int_cau_conf_sb() warn: always true condition '(p_hwfn->cdev->rx_coalesce_usecs <= 255) => (0-255 <= 255)' .. The data types for rx/tx_coalesce_usecs should be u16. Fixes: commit 722003ac40c2 ("qed: Add support for coalescing config read/update.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag()Dan Carpenter
There is a static checker warning here "warn: mask and shift to zero" and the code sets "ring" to zero every time. From looking at how QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the qlcnic_83xx_hndl() should be removed. Fixes: 4be41e92f7c6 ('qlcnic: 83xx data path routines') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23qede: Add support for coalescing config read/update.Sudarsana Reddy Kalluru
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 16:19:12 +0000