summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)Author
2016-05-12qede: Add VF supportYuval Mintz
Adding a PCI callback for `sriov_configure' and a new PCI device id for the VF [+ Some minor changes to accomodate differences between PF and VF at the qede]. Following this, VF creation should be possible and the entire subset of existing PF functionality that's allow to VFs should be supported. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: Align TLVsYuval Mintz
As the VF infrastructure is supposed to offer backward/forward compatibility, the various types associated with VF<->PF communication should be aligned across all various platforms that support IOV on our family of adapters. This adds a couple of currently missing values, specifically aligning the enum for the various TLVs possible in the communication between them. It then adds the PF implementation for some of those missing VF requests. This support isn't really necessary for the Linux VF as those VFs aren't requiring it [at least today], but are required by VFs running on other OSes. LRO is an example of one such configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: Bulletin and LinkYuval Mintz
Up to this point, VF and PF communication always originates from VF. As a result, VF cannot be notified of any async changes, and specifically cannot be informed of the current link state. This introduces the bulletin board, the mechanism through which the PF is going to communicate async notifications back to the VF. basically, it's a well-defined structure agreed by both PF and VF which the VF would continuously poll and into which the PF would DMA messages when needed. [Bulletin board is actually allocated and communicated in previous patches but never before used] Based on the bulletin infrastructure, the VF can query its link status and receive said async carrier changes. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: IOV l2 functionalityYuval Mintz
This adds sufficient changes to allow VFs l2-configuration flows to work. While the fastpath of the VF and the PF are meant to be exactly the same, the configuration of the VF is done by the PF. This diverges all VF-related configuration flows that originate from a VF, making them pass through the VF->PF channel and adding sufficient logic on the PF side to support them. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: IOV configure and FLRYuval Mintz
While previous patches have already added the necessary logic to probe VFs as well as enabling them in the HW, this patch adds the ability to support VF FLR & SRIOV disable. It then wraps both flows together into the first IOV callback to be provided to the protocol driver - `configure'. This would later to be used to enable and disable SRIOV in the adapter. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: Introduce VFsYuval Mintz
This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: Add VF->PF channel infrastructureYuval Mintz
Communication between VF and PF is based on a dedicated HW channel; VF will prepare a messge, and by signaling the HW the PF would get a notification of that message existance. The PF would then copy the message, process it and DMA an answer back to the VF as a response. The messages themselves are TLV-based - allowing easier backward/forward compatibility. This patch adds the infrastructure of the channel on the PF side - starting with the arrival of the notification and ending with DMAing the response back to the VF. It also adds a dummy-response as reference, as it only lays the groundwork of the communication; it doesn't really add support of any actual messages. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: Add CONFIG_QED_SRIOVYuval Mintz
Add support for a new Kconfig option for qed* driver which would allow [eventually] the support in VFs. This patch adds the necessary logic in the PF to learn about the possible VFs it will have to support [Based on PCI configuration space and HW], and prepare a database with an entry per-VF as infrastructure for future interaction with said VFs. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11qlcnic: potential NULL dereference in qlcnic_83xx_get_minidump_template()Dan Carpenter
If qlcnic_fw_cmd_get_minidump_temp() fails then "fw_dump->tmpl_hdr" is NULL or possibly freed. It can lead to an oops later. Fixes: d01a6d3c8ae1 ('qlcnic: Add support to enable capability to extend minidump for iSCSI') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-08qede: uninitialized variable in qede_start_xmit()Dan Carpenter
"data_split" was never set to false. It's just uninitialized. Fixes: 2950219d87b0 ('qede: Add basic network device support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07netxen: netxen_rom_fast_read() doesn't return -1Dan Carpenter
The error handling is broken here. netxen_rom_fast_read() returns zero on success and -EIO on error. It never returns -1. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07netxen: reversed condition in netxen_nic_set_link_parameters()Dan Carpenter
My static checker complains that we are using "autoneg" without initializing it. The problem is the ->phy_read() condition is reversed so we only set this on error instead of success. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07netxen: fix error handling in netxen_get_flash_block()Dan Carpenter
My static checker complained that "v" can be used unintialized if netxen_rom_fast_read() returns -EIO. That function never actually returns -1. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06qede: prevent chip hang when increasing channelsSudarsana Reddy Kalluru
qede requires qed to provide enough resources to accommodate 16 combined channels, but that upper-bound isn't actually being enforced by it. Instead, qed inform back to qede how many channels can be opened based on available resources - but that calculation doesn't really take into account the resources requested by qede; Instead it considers other FW/HW available resources. As a result, if a user would increase the number of channels to more than 16 [e.g., using ethtool] the chip would hang. This change increments the resources requested by qede to 64 combined channels instead of 16; This value is an upper bound on the possible available channels [due to other FW/HW resources]. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03qed: Apply tunnel configurations after PF startManish Chopra
Configure and enable various tunnels on the adapter after PF start. This change was missed as a part of 'commit 464f664501816ef5fbbc00b8de96f4ae5a1c9325 ("qed: Add infrastructure support for tunneling")' Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02qede: add implementation for internal loopback test.Sudarsana Reddy Kalluru
This patch adds the qede implementation for internal loopback test. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02qede: add support for selftests.Sudarsana Reddy Kalluru
This patch adds the qede ethtool support for the following tests: - interrupt test - memory test - register test - clock test Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02qed: add infrastructure for device self tests.Sudarsana Reddy Kalluru
This patch adds the functionality and APIs needed for selftests. It adds the ability to configure the link-mode which is required for the implementation of loopback tests. It adds the APIs for clock test, register test, interrupt test and memory test. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes in the conflicts. In the macsec case, the change of the default ID macro name overlapped with the 64-bit netlink attribute alignment fixes in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26qed: Add PF min bandwidth configuration supportManish Chopra
This patch adds support for PF minimum bandwidth update or configuration notified by management firmware. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26qed: Add PF max bandwidth configuration supportManish Chopra
This patch adds support for PF maximum bandwidth update or configuration notified by management firmware. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26qed: Add vport WFQ configuration APIsManish Chopra
This patch adds relevant APIs needed to configure WFQ (Weighted fair queueing) values for the vports. WFQ configuration is used per vport basis when minimum bandwidth update/configuration is notified to the PF by the management firmware. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed: add support for link pause configuration.Sudarsana Reddy Kalluru
The APIs for making this sort of configuration [e.g., via ethtool] are already present in qede, but the current configuration flow in qed doesn't respect it. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed*: Conditions for changing linkYuval Mintz
There's some inconsistency in current logic determining whether the link settings of a given interface can be changed; I.e., in all modes other than the so-called `deault' mode the interfaces are forbidden from changing the configuration - but even this rule is not applied to all user APIs that may change the configuration. Instead, let the core-module [qed] decide whether an interface can change the configuration by supporting a new API function. We also revise the current rule, allowing all interfaces to change their configurations while laying the infrastructure for future modes where an interface would be blocked from making such a configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qede: Add support for ethtool private flagsYuval Mintz
Adds a getter for the interfaces private flags. The only parameter currently supported is whether the interface is a coupled function [required for supporting 100g]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed*: Align statistics namesYuval Mintz
There's a difference in statsitics' names starting at qed and propagating to qede, where egress counters indicate ranges while ingress counters indiciate high-end. Align all statistcs to follow the same conventions - name indicates range. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24qlcnic: Update version to 5.3.64Manish Chopra
Just updating the version as many fixes got accumulated over 5.3.63 Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qlcnic: protect qlicnic_attach_func with rtnl_lockHannes Frederic Sowa
qlcnic_attach_func requires rtnl_lock to be held. Cc: Dept-GELinuxNICDev@qlogic.com Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix single MTU sized packet from firmware GRO flowManish Chopra
In firmware assisted GRO flow there could be a single MTU sized segment arriving due to firmware aggregation timeout/last segment in an aggregation flow, which is not expected to be an actual gro packet. So If a skb has zero frags from the GRO flow then simply push it in the stack as non gso skb. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix setting Skb network headerManish Chopra
Skb's network header needs to be set before extracting IPv4/IPv6 headers from it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix various memory allocation error flows for fastpathManish Chopra
This patch handles memory allocation failures for fastpath gracefully in the driver. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15qede: Add fastpath support for tunnelingManish Chopra
This patch enables netdev tunneling features and adds TX/RX fastpath support for tunneling in driver. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15qed: Enable GRE tunnel slowpath configurationManish Chopra
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15qed/qede: Add GENEVE tunnel slowpath configuration supportManish Chopra
This patch enables GENEVE tunnel on the adapter and add support for driver hooks to configure UDP ports for GENEVE tunnel offload to be performed by the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15qed/qede: Add VXLAN tunnel slowpath configuration supportManish Chopra
This patch enables VXLAN tunnel on the adapter and add support for driver hooks to configure UDP ports for VXLAN tunnel offload to be performed by the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15qed: Add infrastructure support for tunnelingManish Chopra
This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15qlge: Replace create_singlethread_workqueue with alloc_ordered_workqueueAmitoj Kaur Chawla
Replace deprecated create_singlethread_workqueue with alloc_ordered_workqueue. Work items include getting tx/rx frame sizes, resetting MPI processor, setting asic recovery bit so ordering seems necessary as only one work item should be in queue/executing at any given time, hence the use of alloc_ordered_workqueue. WQ_MEM_RECLAIM flag has been set since ethernet devices seem to sit in memory reclaim path, so to guarantee forward progress regardless of memory pressure. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed* - bump driver versions to 8.7.1.20Yuval Mintz
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qede: add Rx flow hash/indirection support.Sudarsana Reddy Kalluru
Adds support for the following via ethtool: - UDP configuration of RSS based on 2-tuple/4-tuple. - RSS hash key. - RSS indirection table. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed: add Rx flow hash/indirection support.Sudarsana Reddy Kalluru
Adds the required API for passing RSS-related configuration from qede. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed*: remove version dependencyRahul Verma
Inbox drivers don't need versioning scheme in order to guarantee compatibility, as both qed and qede are compiled from same codebase. Signed-off-by: Rahul Verma <rahul.verma@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30qed: initialize return rc to avoid returning garbageColin Ian King
in the case where qed_slowpath_irq_req is not called, rc is not assigned and so qed_int_igu_enable will return a garbage value. Fix this by initializing rc to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-25qlge: Update version to 1.00.00.35Manish Chopra
Just updating version as many fixes got accumulated over 1.00.00.34 Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18qlge: Fix receive packets drop.Manish Chopra
When running small packets [length < 256 bytes] traffic, packets were being dropped due to invalid data in those packets which were delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu ensures copying latest and updated data into skb from the receive buffer. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11qed: Enlrage the drain timeoutYuval Mintz
In the scenario where slowpath configuration isn't passing due to various pause configurations affecting the chip, the theoretical time required in worst-case-scenario to empty hw fifos sufficiently to guarantee that slowpath configuration would flow is currently insufficient. This increases such a drain request to the theoretical maximum. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11qed: Notify of transciever changesZvi Nachmani
Handle a new message from the MFW, one that indicate that the transciever state has changed, and log that into the system logs. Signed-off-by: Zvi Nachmani <Zvi.Nachmani@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11qed: Major changes to MB lockingTomer Tayar
Driver interaction with the managemnt firmware is done via mailbox commands which the management firmware periodically sample, as well as placing of additional data in set places in the shared memory. Each PF has a single designated mailbox address, and all flows that require messaging to the management should use it. This patch does 2 things: 1. It re-defines the critical section surrounding the mailbox sending - that section should include the setting of the shared memory as well as the sending of the command [otherwise a race might send a command with the data of a different command]. 2. It moves the locking scheme from using mutices into using spinlocks. This lays the groundwork for sending MFW commands from non-sleepable contexts. Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:28:46 +0000