summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/pensando
AgeCommit message (Collapse)Author
2023-12-13ionic: fill out pci error handlersShannon Nelson
Set up the pci_error_handlers error_detected and resume to be useful in handling AER events. If the error detected is pci_channel_io_frozen we set up to do an FLR at the end of the AER handling - this tends to clear things up well enough that traffic can continue. Else, let the AER/PCI machinery do what is needed for the less serious errors seen. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: lif debugfs refresh on resetShannon Nelson
Remove and restore the lif's debugfs pointers on a reset, and make sure to check for the dentry before removing it in case an earlier reset failed to rebuild the lif. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: use timer_shutdown_syncShannon Nelson
When stopping the watchdog timer at remove time we should be using the new timer_shutdown_sync to assure the timer doesn't ever get rearmed. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: no fw read when PCI reset failedShannon Nelson
If there was a failed attempt to reset the PCI connection, don't later try to read from PCI as the space is unmapped and will cause a paging request crash. When clearing the PCI setup we can clear the dev_info register pointer, and check it before using it in the fw_running test. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: prevent pci disable of already disabled deviceShannon Nelson
If a reset fails, the PCI device is left in a disabled state, so don't try to disable it again on driver remove. This prevents a scary looking WARN trace in the kernel log. ionic 0000:2b:00.0: disabling already-disabled device Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: bypass firmware cmds when stuck in resetShannon Nelson
If the driver or firmware is stuck in reset state, don't bother trying to use adminq commands. This speeds up shutdown and prevents unnecessary timeouts and error messages. This includes a bit of rework on ionic_adminq_post_wait() and ionic_adminq_post_wait_nomsg() to both use __ionic_adminq_post_wait() which can do the checks needed in both cases. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: keep filters across FLRShannon Nelson
Make sure we keep and replay the filters and RSS config across an FLR by using our FW_RESET flag. This gets checked on the way down and on the way back up to help determine how much LIF state to keep and restore across a reset action. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: pass opcode to devcmd_waitShannon Nelson
Don't rely on the PCI memory for the devcmd opcode because we read a 0xff value if the PCI bus is broken, which can cause us to report a bogus dev_cmd opcode later. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08net: Convert some ethtool_sprintf() to ethtool_puts()justinstitt@google.com
This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h 37e4b8df27bc ("net: stmmac: fix FPE events losing") c3f3b97238f6 ("net: stmmac: Refactor EST implementation") https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/ Adjacent changes: net/ipv4/tcp_ao.c 9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk") 7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: Re-arrange ionic_intr_info struct for cache perfBrett Creeley
dim_coal_hw is accessed in the hotpath along with other values from the first cacheline of ionic_intr_info. So, re-arrange the structure so the hot path variables are on the first cacheline. Before: struct ionic_intr_info { char name[32]; /* 0 32 */ unsigned int index; /* 32 4 */ unsigned int vector; /* 36 4 */ u64 rearm_count; /* 40 8 */ unsigned int cpu; /* 48 4 */ /* XXX 4 bytes hole, try to pack */ cpumask_t affinity_mask; /* 56 1024 */ /* --- cacheline 16 boundary (1024 bytes) was 56 bytes ago --- */ u32 dim_coal_hw; /* 1080 4 */ /* size: 1088, cachelines: 17, members: 7 */ /* sum members: 1080, holes: 1, sum holes: 4 */ /* padding: 4 */ }; After: struct ionic_intr_info { char name[32]; /* 0 32 */ u64 rearm_count; /* 32 8 */ unsigned int index; /* 40 4 */ unsigned int vector; /* 44 4 */ unsigned int cpu; /* 48 4 */ u32 dim_coal_hw; /* 52 4 */ cpumask_t affinity_mask; /* 56 1024 */ /* size: 1080, cachelines: 17, members: 7 */ /* last cacheline: 56 bytes */ }; Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-6-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: Make the check for Tx HW timestamping more obviousBrett Creeley
Currently the checks are: [1] unlikely(q->features & IONIC_TXQ_F_HWSTAMP) [2] !unlikely(q->features & IONIC_TXQ_F_HWSTAMP) [1] is clear enough, but [2] isn't exactly obvious to the reader because !unlikely reads as likely. However, that's not what this means. [2] means that it's unlikely that the q has IONIC_TXQ_F_HWSTAMP enabled. Write an inline helper function to hide the unlikely optimization to make these checks more readable. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-5-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: Don't check null when calling vfree()Brett Creeley
vfree() checks for null internally, so there's no need to check in the caller. So, always vfree() on variables allocated with valloc(). If the variables are never alloc'd vfree() is still safe. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: set ionic ptr before setting up ethtool opsShannon Nelson
Set the lif->ionic value that is used in some ethtool callbacks before setting ethtool ops. There really shouldn't be any race issues before this change since the netdev hasn't been registered yet, but this seems more correct. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: Use cached VF attributesBrett Creeley
Each time a VF attribute is set via iproute a call to get the VF configuration is also made. This is currently problematic because for each VF configuration call there are multiple commands sent to the device. Unfortunately, this doesn't scale well. Fix this by reporting the cached VF attributes. The original change to query the device for getting the VF attributes f16f5be31009 ("ionic: Query FW when getting VF info via ndo_get_vf_config") was made to remain consistent with device set VF attributes. However, after further investigation there is no need to query the device. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: Fix dim work handling in split interrupt modeBrett Creeley
Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: fix snprintf format length warningShannon Nelson
Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107cabea3 ("ionic: more ionic name tweaks") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/ Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-13ionic: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not needed due to `ident` being memset'd to 0 just before the copy. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-pensando-ionic-ionic_main-c-v1-1-23c62a16ff58@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-20ionic: expand the descriptor bufs arrayShannon Nelson
When processing a TSO we may have frags spread across several descriptors, and the total count of frags in one skb may exceed our per descriptor IONIC_MAX_FRAGS: this is fine as long as each descriptor has fewer frags than the limit. Since the skb could have as many as MAX_SKB_FRAGS, and the first descriptor is where we track and map the frag buffers, we need to be sure we can map buffers for all of the frags plus the TSO header in the first descriptor's buffer array. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20ionic: add a check for max SGs and SKB fragsShannon Nelson
Add a check of the queue's max_sg_elems against the maximum frags we expect to see per SKB and take the smaller of the two as our max for the queues' descriptor buffer allocations. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20ionic: count SGs in packet to minimize linearizeShannon Nelson
There are some cases where an skb carries more frags than the number of SGs that ionic can support per descriptor - this forces the driver to linearize the skb. However, if this is a TSO packet that is going to become multiple descriptors (one per MTU-sized packet) and spread the frags across them, this time-consuming linearization is likely not necessary. We scan the frag list and count up the number of SGs that would be created for each descriptor that would be generated, and only linearize if we hit the SG limit on a descriptor. In most cases, we won't even get to the frag list scan, so this doesn't affect typical traffic. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-16ionic: fix 16bit math issue when PAGE_SIZE >= 64KBDavid Christensen
The ionic device supports a maximum buffer length of 16 bits (see ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to the receive rings, the function ionic_rx_fill() uses 16bit math when calculating the number of pages to allocate for an RX descriptor, given the interface's MTU setting. If the system PAGE_SIZE >= 64KB, and the buf_info->page_offset is 0, the remain_len value will never decrement from the original MTU value and the frag_len value will always be 0, causing additional pages to be allocated as scatter- gather elements unnecessarily. A similar math issue exists in ionic_rx_frags(), but no failures have been observed here since a 64KB page should not normally require any scatter-gather elements at any legal Ethernet MTU size. Fixes: 4b0a7539a372 ("ionic: implement Rx page reuse") Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-22ionic: Remove unused declarationsYue Haibing
Commit fbfb8031533c ("ionic: Add hardware init and device commands") declared but never implemented ionic_q_rewind()/ionic_set_dma_mask(). Commit 969f84394604 ("ionic: sync the filters in the work task") declared but never implemented ionic_rx_filters_need_sync(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20230821134717.51936-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-06ionic: Add missing err handling for queue reconfigNitya Sunkad
ionic_start_queues_reconfig returns an error code if txrx_init fails. Handle this error code in the relevant places. This fixes a corner case where the device could get left in a detached state if the CMB reconfig fails and the attempt to clean up the mess also fails. Note that calling netif_device_attach when the netdev is already attached does not lead to unexpected behavior. Change goto name "errout" to "err_out" to maintain consistency across goto statements. Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers") Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler") Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: add FLR recovery supportShannon Nelson
Add support for the PCI reset handlers in order to manage an FLR event. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: pull out common bits from fw_upShannon Nelson
Pull out some code from ionic_lif_handle_fw_up() that can be used in the coming FLR recovery patch. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: extract common bits from ionic_probeShannon Nelson
Pull out some chunks of code from ionic_probe() that will be common in rebuild paths. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: extract common bits from ionic_removeShannon Nelson
Pull out a chunk of code from ionic_remove() that will be common in teardown paths. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07ionic: remove dead device fail pathShannon Nelson
Remove the probe error path code that leaves the driver bound to the device, but with essentially a dead device. This was useful maybe twice early in the driver's life and no longer makes sense to keep. Fixes: 30a1e6d0f8e2 ("ionic: keep ionic dev on lif init fail") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07ionic: remove WARN_ON to prevent panic_on_warnNitya Sunkad
Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. Fixes: 77ceb68e29cc ("ionic: Add notifyq support") Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-27ionic: use vmalloc_array and vcallocJulia Lawall
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-12-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12ionic: add support for ethtool extended stat link_down_countNitya Sunkad
Following the example of 'commit 9a0f830f8026 ("ethtool: linkstate: add a statistic for PHY down events")', added support for link down events. Add callback ionic_get_link_ext_stats to ionic_ethtool.c to support link_down_count, a property of netdev that gets reported exclusively on physical link down events. Run ethtool -I <devname> to display the device link down count. Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-03ionic: catch failure from devlink_allocShannon Nelson
Add a check for NULL on the alloc return. If devlink_alloc() fails and we try to use devlink_priv() on the NULL return, the kernel gets very unhappy and panics. With this fix, the driver load will still fail, but at least it won't panic the kernel. Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-03ionic: remove noise from ethtool rxnfc error msgShannon Nelson
It seems that ethtool is calling into .get_rxnfc more often with ETHTOOL_GRXCLSRLCNT which ionic doesn't know about. We don't need to log a message about it, just return not supported. Fixes: aa3198819bea6 ("ionic: Add RSS support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-12ionic: Don't overwrite the cyclecounter bitmaskBrett Creeley
The driver was incorrectly overwriting the cyclecounter bitmask, which was truncating it and not aligning to the hardware mask value. This isn't causing any issues, but it's wrong. Fix this by not constraining the cyclecounter/hardware mask. Luckily, this seems to cause no issues, which is why this change doesn't have a fixes tag and isn't being sent to net. However, if any transformations from time->cycles are needed in the future, this change will be needed. Suggested-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-24ionic: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: add tx/rx-push support with device Component Memory BuffersShannon Nelson
The ionic device has on-board memory (CMB) that can be used for descriptors as a way to speed descriptor access for faster packet processing. It is rumored to improve latency and/or packets-per-second for some profiles of small packet traffic, although your mileage may vary. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: remove unnecessary void castsShannon Nelson
Minor Code cleanup details. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: remove unnecessary indirectionShannon Nelson
We have the pointer already, don't need to go through the lif struct for it. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-03ionic: missed doorbell workaroundAllen Hubbe
In one version of the HW there is a remote possibility that it will miss the doorbell ring. This adds a bit of protection to be sure we don't stall a queue from a missed doorbell. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clear up notifyq alloc commentaryShannon Nelson
Make sure the q+cq alloc for NotifyQ is clearly documented and don't bother with unnecessary local variables. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clean interrupt before enabling queue to avoid credit raceNeel Patel
Clear the interrupt credits before enabling the queue rather than after to be sure that the enabled queue starts at 0 and that we don't wipe away possible credits after enabling the queue. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Neel Patel <neel.patel@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30net: devlink: let the core report the driver name instead of the driversVincent Mailhol
The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. In order to factorize code, make devlink_nl_info_fill() add the driver name attribute. Now that the core sets the driver name attribute, drivers are not supposed to call devlink_info_driver_name_put() anymore. Remove devlink_info_driver_name_put() and clean-up all the drivers using this function in their callback. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14net: ionic: Fix error handling in ionic_init_module()Yuan Can
A problem about ionic create debugfs failed is triggered with the following log given: [ 415.799514] debugfs: Directory 'ionic' with parent '/' already present! The reason is that ionic_init_module() returns ionic_bus_register_driver() directly without checking its return value, if ionic_bus_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ionic can never be created later. ionic_init_module() ionic_debugfs_create() # create debugfs directory ionic_bus_register_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when ionic_bus_register_driver() returns error. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_portJiri Pirko
Benefit from the previously implemented tracking of netdev events in devlink code and instead of calling devlink_port_type_eth_set() and devlink_port_type_clear() to set devlink port type and link to related netdev, use SET_NETDEV_DEVLINK_PORT() macro to assign devlink_port pointer to netdevice which is about to be registered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27ionic: refactor use of ionic_rx_fill()Neel Patel
The same pre-work code is used before each call to ionic_rx_fill(), so bring it in and make it a part of the routine. Signed-off-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27ionic: enable tunnel offloadsNeel Patel
Support stateless offloads for GRE, VXLAN, GENEVE, IPXIP4 and IPXIP6 when the FW supports them. Signed-off-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 18:56:40 +0000