| Age | Commit message (Collapse) | Author |
|---|
|
For consistency the VCAP cache area is erased just before the new rule is
being encoded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.
Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The microchip lan743x MDIO bus driver can perform both C22 and C45
transfers in some variants. Create separate functions for each and
register the C45 versions using the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ptp was not enabled due to missing IRQ for instance,
lan966x_ptp_deinit() will dereference NULL pointers.
Fixes: d096459494a8 ("net: lan966x: Add support for ptp clocks")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The blamed commit implemented the vcap_operations to allow to add an
entry in the TCAM. One of the callbacks is to validate the supported
keysets. If the TCAM lookup was not enabled, then this will return
failure so no entries could be added.
This doesn't make much sense, as you can enable at a later point the
TCAM. Therefore change it such to allow entries in TCAM even it is not
enabled.
Fixes: 4426b78c626d ("net: lan966x: Add port keyset config and callback interface")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is an issue with the checking of the return value of
'of_get_mac_address', which returns 0 on success and negative value on
failure. The driver interpretated the result the opposite way. Therefore
if there was a MAC address defined in the DT, then the driver was
generating a random MAC address otherwise it would use address 0.
Fix this by checking correctly the return value of 'of_get_mac_address'
Fixes: b74ef9f9cb91 ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the PCS was taken out of reset, we were changing by mistake also
the speed to 100 Mbit. But in case the link was going down, the link
up routine was setting correctly the link speed. If the link was not
getting down then the speed was forced to run at 100 even if the
speed was something else.
On lan966x, to set the speed link to 1G or 2.5G a value of 1 needs to be
written in DEV_CLOCK_CFG_LINK_SPEED. This is similar to the procedure in
lan966x_port_init.
The issue was reproduced using 1000base-x sfp module using the commands:
ip link set dev eth2 up
ip link addr add 10.97.10.2/24 dev eth2
ethtool -s eth2 speed 1000 autoneg off
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/20221221093315.939133-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the following smatch warning:
smatch warnings:
drivers/net/ethernet/microchip/vcap/vcap_api_debugfs.c:103 vcap_debugfs_show_rule_keyfield() error: uninitialized symbol 'value'.
drivers/net/ethernet/microchip/vcap/vcap_api_debugfs.c:106 vcap_debugfs_show_rule_keyfield() error: uninitialized symbol 'mask'.
In case the vcap field was VCAP_FIELD_U128 and the key was different
than IP6_S/DIP then the value and mask were not initialized, therefore
initialize them.
Fixes: 610c32b2ce66 ("net: microchip: vcap: Add vcap_get_rule")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vcap_alloc_rule() can't return NULL.
So remove some dead-code
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/27992ffcee47fc865ce87274d6dfcffe7a1e69e0.1670873784.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Semicolons after "}" are not needed.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/202212051422158113766@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently lan966x, doesn't allow to run PTP over interfaces that are
part of the bridge. The reason is when the lan966x was receiving a
PTP frame (regardless if L2/IPv4/IPv6) the HW it would flood this
frame.
Now that it is possible to add VCAP rules to the HW, such to trap these
frames to the CPU, it is possible to run PTP also over interfaces that
are part of the bridge.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the function vcap_rule_get_key_u32 which allows to get the value and
the mask of a key that exist on the rule. If the key doesn't exist,
it would return error.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the function vcap_mod_rule which allows to update an existing rule
in the vcap. It is required for the rule to exist in the vcap to be able
to modify it.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add function vcap_get_rule which returns a rule based on the internal
rule id.
The entire functionality of reading and decoding the rule from the VCAP
was inside vcap_api_debugfs file. So move the entire implementation in
vcap_api as this is used also by vcap_get_rule.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mchp_sparx5_probe() won't destroy workqueue created by
create_singlethread_workqueue() in sparx5_start() when later
inits failed. Add destroy_workqueue in the cleanup_ports case,
also add it in mchp_sparx5_remove()
Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221203070259.19560-1-linqiheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
consume_skb on transmitted, kfree_skb on dropped, do not free on
TX_BUSY.
Previously the xmit function could return -EBUSY without freeing, which
supposedly is interpreted as a drop. And was using kfree on successfully
transmitted packets.
sparx5_fdma_xmit and sparx5_inject returns error code, where -EBUSY
indicates TX_BUSY and any other error code indicates dropped.
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A loop for reading MISTAT register continues while regmap_read() fails
and (mistat & BUSY), but if regmap_read() fails a value of mistat is
undefined.
The patch proposes to check for BUSY flag only when regmap_read()
succeed. Compile test only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d70e53262f5c ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In functions regmap_encx24j600_phy_reg_read() and
regmap_encx24j600_phy_reg_write() in the conditions of the waiting
cycles for filling the variable 'ret' it is necessary to add parentheses
to prevent wrong assignment due to logical operations precedence.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d70e53262f5c ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If vcap_dup_rule() fails that leads to an error pointer dereference
side the call to vcap_free_rule(). Also it only returns an error if the
very last call to vcap_read_rule() fails and it returns success for
other errors.
I've changed it to just stop printing after the first error and return
an error code.
Fixes: 3a7921560d2f ("net: microchip: sparx5: Add VCAP rule debugFS support for the VCAP API")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/Y4XUUx9kzurBN+BV@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently whenever a new rule id is generated, it picks up the next
number bigger than previous id. So it would always be 1, 2, 3, etc.
When the rule with id 1 will be deleted and a new rule will be added,
it will have the id 4 and not id 1.
In theory this can be a problem if at some point a rule will be added
and removed ~0 times. Then no more rules can be added because there
are no more ids.
Change this such that when a new rule is added, search for an empty
rule id starting with value of 1 as value 0 is reserved.
Fixes: c9da1ac1c212 ("net: microchip: sparx5: Adding initial tc flower support for VCAP API")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221128142959.8325-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tools/lib/bpf/ringbuf.c
927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap")
b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On lan966x the layout of the vcap memory is different than on sparx5.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement vcap_operations and enable default port keyset configuration
for each port. Now it is possible actually write/read/move entries in
the VCAP.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extend matchall with action goto. This is needed to enable the lookup in
the VCAP. It is needed to connect chain 0 to a chain that is recognized
by the HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the only supported action is ACTION_TRAP and the only
dissector is ETH_ADDRS. Others will be added in future patches.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add registers used to access vcap controller.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This provides the lan966x is2 model and adds it to the vcap control
instance that will be provided to the vcap API.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When lan966x driver is initialized, initialize also the VCAP module for
lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the keysets, keys, actionsets and actions used by lan966x in IS2.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently there are 2 files that contain the keyfields, keys,
actionfields and actions. First file is used by the kunit while the
second one is used by VCAP api.
The header file that is used by kunit is just a super set of the of the
header file used by VCAP api.
Therefore not to have duplicate information in different files which is
also harder to maintain, create a single file that is used both by API
and by kunit.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extend lan966x XDP support with the action XDP_REDIRECT. This is similar
with the XDP_TX, so a lot of functionality can be reused.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend lan966x XDP support with the action XDP_TX. In this case when the
received buffer needs to execute XDP_TX, the buffer will be moved to the
TX buffers. So a new RX buffer will be allocated.
When the TX finish with the frame, it would give back the buffer to the
page pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To add support for XDP_TX it is required to be able to write to the DMA
area therefore it is required that the pages will be mapped using
DMA_BIDIRECTIONAL flag.
Therefore check if there are any xdp programs on the interfaces and in
that case set DMA_BIDRECTIONAL otherwise use DMA_FROM_DEVICE.
Therefore when a new XDP program is added it is required to redo the
page_pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default the rxq memory model is MEM_TYPE_PAGE_SHARED but to be able
to reuse pages on the TX side, when the XDP action XDP_TX it is required
to update the memory model to PAGE_POOL.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently when a frame was transmitted, it is required to unamp the
frame that was transmitted. The length of the frame was taken from the
transmitted skb. In the future we might not have an skb, therefore store
the length skb directly in the lan966x_tx_dcb_buf and use this one to
unamp the frame.
While at this, also arrange the members in lan966x_tx_dcb_buf not to
have any holes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce lan966x_fdma_tx_setup_dcb and lan966x_fdma_tx_start functions
and use of them inside lan966x_fdma_xmit. There is no functional change
in here.
They are introduced to be used when XDP_TX/REDIRECT actions are
introduced.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the page_pool params to allocate XDP_PACKET_HEADROOM space as
headroom for all received frames.
This is needed for when the XDP_TX and XDP_REDIRECT are implemented.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tests the filtering of keys, either dropping unsupported keys or
dropping keys specified in a list.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will display a list of keyset in case the type_id field in the VCAP
rule has been wildcarded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows support of TC protocol all for the Sparx5 IS2 VCAP.
This is done by creating multiple rules that covers the rule size and
traffic types in the IS2.
Each rule size (e.g X16 and X6) may have multiple keysets and if there are
more than one the type field in the VCAP rule will be wildcarded to support
these keysets.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for making a copy of a rule and modify keys and actions
to differentiate the copy.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If phylink_of_phy_connect() fails, the port should be disabled.
If sparx5_serdes_set()/phy_power_on() fails, the port should be
disabled and the phylink should be stopped and disconnected.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Tested-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221117125918.203997-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Smatch complains that "err" can be uninitialized on these paths. Also
it's just nicer to "return 0;" instead of "return err;"
Fixes: 3a344f99bb55 ("net: microchip: sparx5: Add support for TC flower ARP dissector")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y3eg9Ml/LmLR3L3C@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This tests the functionality of the debugFS support:
- finding valid keyset on an address
- raw VCAP output
- full rule VCAP output
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This ensures that the VCAP cache and the lists maintained in the VCAP
instance is protected when accessed by different clients.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This add support for displaying the keys and actions in a rule.
The keys and action display format will be determined by the size and the
type of the key or action. The longer keys will typically be displayed as a
hexadecimal byte array.
The actionset is not decoded in full as the Sparx5 IS2 only has one
supported action, so this will be added later with other VCAP types.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This add support to show all rules in a VCAP instance. The information
shown is:
- rule id
- address range
- size
- chain id
- keyset name, subword size, register span
- actionset name, subword size, register span
- counter value
- sticky bit (one bit width counter)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for decoding VCAP rules with a minimum number of
attributes: address, rule size and keyset.
This allows for a quick inspection of a VCAP instance to determine if the
rule are present and in the correct order.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a debugFS root folder for Sparx5 and add a vcap folder underneath with
the VCAP instances and the ports
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
