summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
AgeCommit message (Collapse)Author
2022-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/microchip/lan966x/lan966x_main.c d08ed852560e ("net: lan966x: Make sure to release ptp interrupt") c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-15net: lan966x: Make sure to release ptp interruptHoratiu Vultur
When the lan966x driver is removed make sure to remove also the ptp_irq IRQ. Fixes: e85a96e48e3309 ("net: lan966x: Add support for ptp interrupts") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220413195716.3796467-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
2022-04-11net: lan966x: Update FDMA to change MTU.Horatiu Vultur
When changing the MTU, it is required to change also the size of the DBs. In case those frames will arrive to CPU. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Add FDMA functionalityHoratiu Vultur
Ethernet frames can be extracted or injected to or from the device's DDR memory. There is one channel for injection and one channel for extraction. Each of these channels contain a linked list of DCBs which contains DB. The DCB contains only 1 DB for both the injection and extraction. Each DB contains a frame. Every time when a frame is received or transmitted an interrupt is generated. It is not possible to use both the FDMA and the manual injection/extraction of the frames. Therefore the FDMA has priority over the manual because of better performance values. FDMA: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 420 MBytes 352 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 420 MBytes 351 Mbits/sec receiver iperf -c 192.168.1.1 -R [ 5] 0.00-10.01 sec 528 MBytes 442 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 524 MBytes 440 Mbits/sec receiver Manual: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 93.8 MBytes 78.5 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 93.8 MBytes 78.4 Mbits/sec receiver ipers -c 192.168.1.1 -R [ 5] 0.00-10.03 sec 121 MBytes 101 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 118 MBytes 99.0 Mbits/sec receiver Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Expose functions that are needed by FDMAHoratiu Vultur
Expose the following functions 'lan966x_hw_offload', 'lan966x_ifh_get_src_port' and 'lan966x_ifh_get_timestamp' in lan966x_main.h so they can be accessed by FDMA. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Add registers that are used for FDMA.Horatiu Vultur
Add the registers that are used to configure the FDMA. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Fix IGMP snooping when frames have vlan tagHoratiu Vultur
In case an IGMP frame has a vlan tag, then the function lan966x_hw_offload couldn't figure out that is a IGMP frame. Therefore the SW thinks that the frame was already forward by the HW which is not true. Extend lan966x_hw_offload to pop the vlan tag if are any and then check for IGMP frames. Fixes: 47aeea0d57e80c ("net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED ") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-29net: lan966x: fix kernel oops on ioctl when I/F is downMichael Walle
ioctls handled by phy_mii_ioctl() will cause a kernel oops when the interface is down. Fix it by making sure there is a PHY attached. Fixes: 735fec995b21 ("net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220328220350.3118969-1-michael@walle.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-11net: lan966x: Improve the CPU TX bitrate.Horatiu Vultur
When doing manual injection of the frame, it is required to check if the TX FIFO is ready to accept the next word of the frame. For this we are using 'readx_poll_timeout_atomic', the only problem is that before it actually checks the status, is determining the time when to finish polling the status. Which seems to be an expensive operation. Therefore check the status of the TX FIFO before calling 'readx_poll_timeout_atomic'. Doing this will improve the TX bitrate by ~70%. Because 99% the FIFO is ready by that time. The measurements were done using iperf3. Before: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.03 sec 55.2 MBytes 46.2 Mbits/sec 0 sender [ 5] 0.00-10.04 sec 53.8 MBytes 45.0 Mbits/sec receiver After: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.10 sec 95.0 MBytes 78.9 Mbits/sec 0 sender [ 5] 0.00-10.11 sec 95.0 MBytes 78.8 Mbits/sec receiver Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net: lan966x: Add spinlock for frame transmission from CPU.Horatiu Vultur
The registers used to inject a frame to one of the ports is shared between all the net devices. Therefore, there can be race conditions for accessing the registers when two processes send frames at the same time on different ports. To fix this, add a spinlock around the function 'lan966x_port_ifh_xmit()'. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08net: lan966x: allow offloading timestamp operations to the PHYHoratiu Vultur
In case the MAC is using 'netif_rx()' to deliver the skb up the network stack, it needs to check whether 'skb_defer_rx_timestmap()' is necessary or not. In case is needed then don't call 'netif_rx()' Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220307094632.3764266-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-04net: ethernet: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Łukasz Stelmach <l.stelmach@samsung.com> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: UNGLinuxDriver@microchip.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan966x: Fix when CONFIG_IPV6 is not setHoratiu Vultur
When CONFIG_IPV6 is not set, then the linking of the lan966x driver fails with the following error: drivers/net/ethernet/microchip/lan966x/lan966x_main.c:444: undefined reference to `ipv6_mc_check_mld' The fix consists in adding a check also for IS_ENABLED(CONFIG_IPV6) Fixes: 47aeea0d57e80c ("net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLEDHoratiu Vultur
The callback allows to enable/disable multicast snooping. When the snooping is enabled, all IGMP and MLD frames are redirected to the CPU, therefore make sure not to set the skb flag 'offload_fwd_mark'. The HW will not flood multicast ipv4/ipv6 data frames. When the snooping is disabled, the HW will flood IGMP, MLD and multicast ipv4/ipv6 frames according to the mcast_flood flag. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: lan966x: Update the PGID used by IPV6 data framesHoratiu Vultur
When enabling the multicast snooping, the forwarding of the IPV6 frames has it's own forwarding mask. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03net: lan966x: use .mac_select_pcs() interfaceHoratiu Vultur
Convert lan966x to use the mac_select_interface instead of phylink_set_pcs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220202114949.833075-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01net: lan966x: Add support for ptp interruptsHoratiu Vultur
When doing 2-step timestamping the HW will generate an interrupt when it managed to timestamp a frame. It is the SW responsibility to read it from the FIFO. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01net: lan966x: Update extraction/injection for timestampingHoratiu Vultur
Update both the extraction and injection to do timestamping of the frames. The extraction is always doing the timestamping while for injection is doing the timestamping only if it is configured. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMPHoratiu Vultur
Implement the ioctl callbacks SIOCSHWTSTAMP and SIOCGHWTSTAMP to allow to configure the ports to enable/disable timestamping for TX. The RX timestamping is always enabled. The HW is capable to run both 1-step timestamping and 2-step timestamping. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01net: lan966x: Add support for ptp clocksHoratiu Vultur
The lan966x has 3 PHC. Enable each of them, for now all the timestamping is happening on the first PHC. Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01net: lan966x: Add registers that are use for ptp functionalityHoratiu Vultur
Add the registers that will be used to configure the PHC in the HW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: lan966x: Fix sleep in atomic context when injecting framesHoratiu Vultur
On lan966x, when injecting a frame it was polling the register QS_INJ_STATUS to see if it can continue with the injection of the frame. The problem was that it was using readx_poll_timeout which could sleep in atomic context. This patch fixes this issue by using readx_poll_timeout_atomic. Fixes: d28d6d2e37d10d ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-05net: lan966x: Extend switchdev with mdb supportHoratiu Vultur
Extend lan966x driver with mdb support by implementing the switchdev calls: SWITCHDEV_OBJ_ID_PORT_MDB and SWITCHDEV_OBJ_ID_HOST_MDB. It is allowed to add both ipv4/ipv6 entries and l2 entries. To add ipv4/ipv6 entries is not required to use the PGID table while for l2 entries it is required. The PGID table is much smaller than MAC table so only fewer l2 entries can be added. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: lan966x: Fix the vlan used by host portsHoratiu Vultur
The blamed commit changed the vlan used by the host ports to be 4095 instead of 0. Because of this change the following issues are seen: - when the port is probed first it was adding an entry in the MAC table with the wrong vlan (port->pvid which is default 0) and not HOST_PVID - when the port is removed from a bridge, it was using the wrong vlan to add entries in the MAC table. It was using the old PVID and not the HOST_PVID This patch fixes this two issues by using the HOST_PVID instead of port->pvid. Fixes: 6d2c186afa5d5d ("net: lan966x: Add vlan support.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-23net: lan966x: Add support for multiple bridge flagsHoratiu Vultur
This patch series extends the current supported bridge flags with the following flags: BR_FLOOD, BR_BCAST_FLOOD and BR_LEARNING. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Extend switchdev with fdb supportHoratiu Vultur
Extend lan966x driver with fdb support by implementing the switchdev calls SWITCHDEV_FDB_ADD_TO_DEVICE and SWITCHDEV_FDB_DEL_TO_DEVICE. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Add vlan support.Horatiu Vultur
Extend the driver to support vlan filtering by implementing the switchdev calls SWITCHDEV_OBJ_ID_PORT_VLAN, SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Add support to offload the forwarding.Horatiu Vultur
This patch adds basic support to offload in the HW the forwarding of the frames. The driver registers to the switchdev callbacks and implements the callbacks for attributes SWITCHDEV_ATTR_ID_PORT_STP_STATE and SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME. It is not allowed to add a lan966x port to a bridge that contains a different interface than lan966x. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Remove .ndo_change_rx_flagsHoratiu Vultur
The function lan966x_port_change_rx_flags() was used only when IFF_PROMISC flag was set. In that case it was setting to copy all the frames to the CPU instead of removing any RX filters. Therefore remove it. Fixes: d28d6d2e37d10d ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: add support for interrupts from analyzerHoratiu Vultur
This patch adds support for handling the interrupts generated by the analyzer. Currently, only the MAC table generates these interrupts. The MAC table will generate an interrupt whenever it learns or forgets an entry in the table. It is the SW responsibility figure out which entries were added/removed. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03net: lan966x: fix a IS_ERR() vs NULL check in lan966x_create_targets()Dan Carpenter
The devm_ioremap() function does not return error pointers. It returns NULL. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-02net: lan966x: Fix duplicate check in frame extractionHoratiu Vultur
The blamed commit generates the following smatch static checker warning: drivers/net/ethernet/microchip/lan966x/lan966x_main.c:515 lan966x_xtr_irq_handler() warn: duplicate check 'sz < 0' (previous on line 502) This patch fixes this issue removing the duplicate check 'sz < 0' Fixes: d28d6d2e37d10d ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: lan966x: add ethtool configuration and statisticsHoratiu Vultur
This patch adds support for statistics counters for the network interfaces. Also adds support for configuring the network interface via ethtool like: speed, duplex etc. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: lan966x: add mactable supportHoratiu Vultur
This patch adds support for MAC table operations like add and forget. Also add the functionality to read the MAC address from DT, if there is no MAC set in DT it would use a random one. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: lan966x: add port module supportHoratiu Vultur
This patch adds support for netdev and phylink in the switch. The injection + extraction is register based. This will be replaced with DMA accees. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: lan966x: add the basic lan966x driverHoratiu Vultur
This patch adds basic SwitchDev driver framework for lan966x. It includes only the IO range mapping and probing of the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 04:24:40 +0000