summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2024-06-03ice/ptp: Remove convert_art_to_tsc()Thomas Gleixner
The core code now provides a mechanism to convert the ART base clock to the corresponding TSC value without requiring an architecture specific function. Replace the direct conversion by filling in the required data. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240513103813.5666-8-lakshmi.sowjanya.d@intel.com
2024-06-03igc: Remove convert_art_ns_to_tsc()Thomas Gleixner
The core code now provides a mechanism to convert the ART base clock to the corresponding TSC value without requiring an architecture specific function. Replace the direct conversion by filling in the required data. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240513103813.5666-5-lakshmi.sowjanya.d@intel.com
2024-06-03e1000e: Replace convert_art_to_tsc()Thomas Gleixner
The core code now provides a mechanism to convert the ART base clock to the corresponding TSC value without requiring an architecture specific function. Replace the direct conversion by filling in the required data. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240513103813.5666-4-lakshmi.sowjanya.d@intel.com
2024-06-01ice: Adjust PTP init for 2x50G E825C devicesGrzegorz Nitka
>From FW/HW perspective, 2 port topology in E825C devices requires merging of 2 port mapping internally and breakout mapping externally. As a consequence, it requires different port numbering from PTP code perspective. For that topology, pf_id can not be used to index PTP ports. Even if the 2nd port is identified as port with pf_id = 1, all PHY operations need to be performed as it was port 2. Thus, special mapping is needed for the 2nd port. This change adds detection of 2x50G topology and applies 'custom' mapping on the 2nd port. Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-11-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Add NAC Topology device capability parserGrzegorz Nitka
Add new device capability ICE_AQC_CAPS_NAC_TOPOLOGY which allows to determine the mode of operation (1 or 2 NAC). Define a new structure to store data from new capability and corresponding parser code. Co-developed-by: Prathisna Padmasanan <prathisna.padmasanan@intel.com> Signed-off-by: Prathisna Padmasanan <prathisna.padmasanan@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Pawel Kaminski <pawel.kaminski@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-10-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Add support for E825-C TS PLL handlingMichal Michalik
The CGU layout of E825-C is a little different than E822/E823. Add support the new hardware adding relevant functions. Signed-off-by: Michal Michalik <michal.michalik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-9-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Change CGU regs struct to anonymousKarol Kolacinski
Simplify the code by using anonymous struct in CGU registers instead of naming each structure 'field'. Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-8-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Introduce ETH56G PHY model for E825C productsSergey Temerkhanov
E825C products feature a new PHY model - ETH56G. Introduces all necessary PHY definitions, functions etc. for ETH56G PHY, analogous to E82X and E810 ones with addition of a few HW-specific functionalities for ETH56G like one-step timestamping. It ensures correct PTP initialization and operation for E825C products. Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-7-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Introduce ice_get_base_incval() helperJacob Keller
Add a new helper for getting base clock increment value for specific HW. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-6-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Move CGU blockSergey Temerkhanov
Move CGU block to the beginning of ice_ptp_hw.c Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-5-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Add PHY OFFSET_READY register clearingKarol Kolacinski
Add a possibility to mark all transmitted/received timestamps as invalid by clearing PHY OFFSET_READY registers. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-4-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Implement Tx interrupt enablement functionsSergey Temerkhanov
Introduce functions enabling/disabling Tx TS interrupts for the E822 and ETH56G PHYs Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-3-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Introduce helper to get tmr_cmd_reg valuesJacob Keller
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd values into register bits for both the main timer and the PHY port timers. The main MAC register has one bit scheme for timer commands, while the PHY commands use a different scheme. The E810 and E830 devices use the same scheme for port commands as used for the main timer. However, E822 and ETH56G hardware has a separate scheme used by the PHY. Introduce helper functions to convert the timer command enumeration into the register values, reducing some code duplication, and making it easier to later refactor the individual port write commands. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-2-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01ice: Introduce ice_ptp_hw structKarol Kolacinski
Create new ice_ptp_hw struct and use it for all HW and PTP-related fields from struct ice_hw. Replace definitions with struct fields, which values are set accordingly to a specific device. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-1-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29ice: check for unregistering correct number of devlink paramsDave Ertman
On module load, the ice driver checks for the lack of a specific PF capability to determine if it should reduce the number of devlink params to register. One situation when this test returns true is when the driver loads in safe mode. The same check is not present on the unload path when devlink params are unregistered. This results in the driver triggering a WARN_ON in the kernel devlink code. The current check and code path uses a reduction in the number of elements reported in the list of params. This is fragile and not good for future maintaining. Change the parameters to be held in two lists, one always registered and one dependent on the check. Add a symmetrical check in the unload path so that the correct parameters are unregistered as well. Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param") CC: Lukasz Czapnik <lukasz.czapnik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29ice: fix 200G PHY types to link speed mappingPaul Greenwalt
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include the mapping of 200G PHY types to link speed. As a result the driver is returning UNKNOWN link speed when setting 200G ethtool advertised link modes. To fix this add 200G PHY types to link speed mapping to ice_get_link_speed_based_on_phy_type(). Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29i40e: Fully suspend and resume IO operations in EEH caseThinh Tran
When EEH events occurs, the callback functions in the i40e, which are managed by the EEH driver, will completely suspend and resume all IO operations. - In the PCI error detected callback, replaced i40e_prep_for_reset() with i40e_io_suspend(). The change is to fully suspend all I/O operations - In the PCI error slot reset callback, replaced pci_enable_device_mem() with pci_enable_device(). This change enables both I/O and memory of the device. - In the PCI error resume callback, replaced i40e_handle_reset_warning() with i40e_io_resume(). This change allows the system to resume I/O operations Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29i40e: factoring out i40e_suspend/i40e_resumeThinh Tran
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been introduced. These functions were factored out from the existing i40e_suspend() and i40e_resume() respectively. This factoring was done due to concerns about the logic of the I40E_SUSPENSED state, which caused the device to be unable to recover. The functions are now used in the EEH handling for device suspend/resume callbacks. The function i40e_enable_mc_magic_wake() has been moved ahead of i40e_io_suspend() to ensure it is declared before being used. Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29e1000e: move force SMBUS near the end of enable_ulp functionHui Wang
The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") introduces a regression on PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the ethernet works well after suspend and resume, but after applying the commit, the ethernet couldn't work anymore after the resume and the dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally): [ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx Without the commit, the force SMBUS code will not be executed if "return 0" or "goto out" is executed in the enable_ulp(), and in my case, the "goto out" is executed since FWSM_FW_VALID is set. But after applying the commit, the force SMBUS code will be ran unconditionally. Here move the force SMBUS code back to enable_ulp() and put it immediately ahead of hw->phy.ops.release(hw), this could allow the longest settling time as possible for interface in this function and doesn't change the original code logic. The issue was found on a Lenovo laptop with the ethernet hw as below: 00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a] (rev 20). And this patch is verified (cable plug and unplug, system suspend and resume) on Lenovo laptops with ethernet hw: [8086:550a], [8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and [8086:0dc7]. Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-27ice: fix accounting if a VLAN already existsJacob Keller
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target VSI. This function prepares a filter in the switch table for the given VSI. If it succeeds, the vsi->num_vlan counter is incremented. It is not considered an error to add a VLAN which already exists in the switch table, so the function explicitly checks and ignores -EEXIST. The vsi->num_vlan counter is still incremented. This seems incorrect, as it means we can double-count in the case where the same VLAN is added twice by the caller. The actual table will have one less filter than the count. The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT condition for when deleting a filter that doesn't exist. This flow only decrements the vsi->num_vlan if it actually deleted a filter. The vsi->num_vlan counter is used only in a few places, primarily related to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs than are present, and ice_vsi_has_non_zero_vlans() could return true potentially in cases where there are only VLAN 0 filters left. Fix this by only incrementing the vsi->num_vlan in the case where we actually added an entry, and not in the case where the entry already existed. Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-27idpf: don't enable NAPI and interrupts prior to allocating Rx buffersAlexander Lobakin
Currently, idpf enables NAPI and interrupts prior to allocating Rx buffers. This may lead to frame loss (there are no buffers to place incoming frames) and even crashes on quick ifup-ifdown. Interrupts must be enabled only after all the resources are here and available. Split interrupt init into two phases: initialization and enabling, and perform the second only after the queues are fully initialized. Note that we can't just move interrupt initialization down the init process, as the queues must have correct a ::q_vector pointer set and NAPI already added in order to allocate buffers correctly. Also, during the deinit process, disable HW interrupts first and only then disable NAPI. Otherwise, there can be a HW event leading to napi_schedule(), but the NAPI will already be unavailable. Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Reported-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-23Merge tag 'net-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Quite smaller than usual. Notably it includes the fix for the unix regression from the past weeks. The TCP window fix will require some follow-up, already queued. Current release - regressions: - af_unix: fix garbage collection of embryos Previous releases - regressions: - af_unix: fix race between GC and receive path - ipv6: sr: fix missing sk_buff release in seg6_input_core - tcp: remove 64 KByte limit for initial tp->rcv_wnd value - eth: r8169: fix rx hangup - eth: lan966x: remove ptp traps in case the ptp is not enabled - eth: ixgbe: fix link breakage vs cisco switches - eth: ice: prevent ethtool from corrupting the channels Previous releases - always broken: - openvswitch: set the skbuff pkt_type for proper pmtud support - tcp: Fix shift-out-of-bounds in dctcp_update_alpha() Misc: - a bunch of selftests stabilization patches" * tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits) r8169: Fix possible ring buffer corruption on fragmented Tx packets. idpf: Interpret .set_channels() input differently ice: Interpret .set_channels() input differently nfc: nci: Fix handling of zero-length payload packets in nci_rx_work() net: relax socket state check at accept time. tcp: remove 64 KByte limit for initial tp->rcv_wnd value net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() tls: fix missing memory barrier in tls_init net: fec: avoid lock evasion when reading pps_enable Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI" testing: net-drv: use stats64 for testing net: mana: Fix the extra HZ in mana_hwc_send_request net: lan966x: Remove ptp traps in case the ptp is not enabled. openvswitch: Set the skbuff pkt_type for proper pmtud support. selftest: af_unix: Make SCM_RIGHTS into OOB data. af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). selftests/net: use tc rule to filter the na packet ipv6: sr: fix memleak in seg6_hmac_init_algo af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock. ...
2024-05-23idpf: Interpret .set_channels() input differentlyLarysa Zaremba
Unlike ice, idpf does not check, if user has requested at least 1 combined channel. Instead, it relies on a check in the core code. Unfortunately, the check does not trigger for us because of the hacky .set_channels() interpretation logic that is not consistent with the core code. This naturally leads to user being able to trigger a crash with an invalid input. This is how: 1. ethtool -l <IFNAME> -> combined: 40 2. ethtool -L <IFNAME> rx 0 tx 0 combined number is not specified, so command becomes {rx_count = 0, tx_count = 0, combined_count = 40}. 3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel, comparing (combined_count + rx_count) and (combined_count + tx_count) to zero. Obviously, (40 + 0) is greater than zero, so the core code deems the input OK. 4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such configuration. The issue has to be solved fundamentally, as current logic is also known to cause AF_XDP problems in ice [0]. Interpret the command in a way that is more consistent with ethtool manual [1] (--show-channels and --set-channels) and new ice logic. Considering that in the idpf driver only the difference between RX and TX queues forms dedicated channels, change the correct way to set number of channels to: ethtool -L <IFNAME> combined 10 /* For symmetric queues */ ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */ [0] https://lore.kernel.org/netdev/20240418095857.2827-1-larysa.zaremba@intel.com/ [1] https://man7.org/linux/man-pages/man8/ethtool.8.html Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23ice: Interpret .set_channels() input differentlyLarysa Zaremba
A bug occurs because a safety check guarding AF_XDP-related queues in ethnl_set_channels(), does not trigger. This happens, because kernel and ice driver interpret the ethtool command differently. How the bug occurs: 1. ethtool -l <IFNAME> -> combined: 40 2. Attach AF_XDP to queue 30 3. ethtool -L <IFNAME> rx 15 tx 15 combined number is not specified, so command becomes {rx_count = 15, tx_count = 15, combined_count = 40}. 4. ethnl_set_channels checks, if there are any AF_XDP of queues from the new (combined_count + rx_count) to the old one, so from 55 to 40, check does not trigger. 5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the queue that AF_XDP is attached to. Interpret the command in a way that is more consistent with ethtool manual [0] (--show-channels and --set-channels). Considering that in the ice driver only the difference between RX and TX queues forms dedicated channels, change the correct way to set number of channels to: ethtool -L <IFNAME> combined 10 /* For symmetric queues */ ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */ [0] https://man7.org/linux/man-pages/man8/ethtool.8.html Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-23Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"Jacob Keller
This reverts commit 565736048bd5f9888990569993c6b6bfdf6dcb6d. According to the commit, it implements a manual AN-37 for some "troublesome" Juniper MX5 switches. This appears to be a workaround for a particular switch. It has been reported that this causes a severe breakage for other switches, including a Cisco 3560CX-12PD-S. The code appears to be a workaround for a specific switch which fails to link in SFI mode. It expects to see AN-37 auto negotiation in order to link. The Cisco switch is not expecting AN-37 auto negotiation. When the device starts the manual AN-37, the Cisco switch decides that the port is confused and stops attempting to link with it. This persists until a power cycle. A simple driver unload and reload does not resolve the issue, even if loading with a version of the driver which lacks this workaround. The authors of the workaround commit have not responded with clarifications, and the result of the workaround is complete failure to connect with other switches. This appears to be a case where the driver can either "correctly" link with the Juniper MX5 switch, at the cost of bricking the link with the Cisco switch, or it can behave properly for the Cisco switch, but fail to link with the Junipir MX5 switch. I do not know enough about the standards involved to clearly determine whether either switch is at fault or behaving incorrectly. Nor do I know whether there exists some alternative fix which corrects behavior with both switches. Revert the workaround for the Juniper switch. Fixes: 565736048bd5 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI") Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/ Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Daly <jeffd@silicom-usa.com> Cc: kernel.org-fo5k2w@ycharbi.fr Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-20Merge tag 'dma-mapping-6.10-2024-05-20' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) * tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping: dma: fix DMA sync for drivers not calling dma_set_mask*() xsk: use generic DMA sync shortcut instead of a custom one page_pool: check for DMA sync shortcut earlier page_pool: don't use driver-set flags field directly page_pool: make sure frag API fields don't span between cachelines iommu/dma: avoid expensive indirect calls for sync operations dma: avoid redundant calls for sync operations dma: compile-out DMA sync op calls when not used iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Documentation/core-api: add swiotlb documentation
2024-05-16idpf: don't skip over ethtool tcp-data-split settingMichal Schmidt
Disabling tcp-data-split on idpf silently fails: # ethtool -G $NETDEV tcp-data-split off # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: on But it works if you also change 'tx' or 'rx': # ethtool -G $NETDEV tcp-data-split off tx 256 # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: off The bug is in idpf_set_ringparam, where it takes a shortcut out if the TX and RX sizes are not changing. Fix it by checking also if the tcp-data-split setting remains unchanged. Only then can the soft reset be skipped. Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam") Reported-by: Xu Du <xudu@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-36182 Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10ice: Fix package download algorithmDan Nowlin
Previously, the driver assumed that all signature segments would contain one or more buffers to download. In the future, there will be signature segments that will contain no buffers to download. Correct download flow to allow for signature segments that have zero download buffers and skip the download in this case. Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240508171908.2760776-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-08net: e1000e & ixgbe: Remove PCI_HEADER_TYPE_MFD duplicatesIlpo Järvinen
PCI_HEADER_TYPE_MULTIFUNC is define by e1000e and ixgbe and both are unused. There is already PCI_HEADER_TYPE_MFD in pci_regs.h anyway which should be used instead so remove the duplicated defines of it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08igc: fix a log entry using uninitialized netdevCorinna Vinschen
During successful probe, igc logs this: [ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The reason is that igc_ptp_init() is called very early, even before register_netdev() has been called. So the netdev_info() call works on a partially uninitialized netdev. Fix this by calling igc_ptp_init() after register_netdev(), right after the media autosense check, just as in igb. Add a comment, just as in igb. Now the log message is fine: [ 5.200987] igc 0000:01:00.0 eth0: PHC added Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08ice: remove correct filters during eswitch releaseMichal Swiatkowski
ice_clear_dflt_vsi() is only removing default rule. Both default RX and TX rule should be removed during release. If it isn't switching to switchdev, second time results in error, because TX filter is already there. Fix it by removing the correct set of rules. Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08igb: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_match_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_match_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08ice: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08iavf: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08i40e: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08xsk: use generic DMA sync shortcut instead of a custom oneAlexander Lobakin
XSk infra's been using its own DMA sync shortcut to try avoiding redundant function calls. Now that there is a generic one, remove the custom implementation and rely on the generic helpers. xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore, remove it. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-05-07Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-05-06 (ice) This series contains updates to ice driver only. Paul adds support for additional E830 devices and adjusts naming for existing E830 devices. Marcin commonizes a couple of TC setup calls to reduce duplicated code. Mateusz adds ice_vsi_cfg_params into ice_vsi to consolidate info. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsi ice: Deduplicate tc action setup ice: update E830 device ids and comments ice: add additional E830 device ids ==================== Link: https://lore.kernel.org/r/20240506170827.948682-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsiMateusz Polchlopek
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi. Prior to that the members of the struct were scattered around ice_vsi, and were copy-pasted for purposes of reinit. Now we have struct handy, and it is easier to have something sticky in the flags field. Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: Deduplicate tc action setupMarcin Szycik
ice_tc_setup_redirect_action() and ice_tc_setup_mirror_action() are almost identical, except for setting filter action. Reduce them to one function with an extra param, which handles both cases. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: update E830 device ids and commentsPaul Greenwalt
Update existing E830 device ids and comments to align with new naming 'C' for 100G and 'CC' for 200G. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: add additional E830 device idsPaul Greenwalt
Add support for additional E830 device ids which are supported by the driver: - 0x12D5: Intel(R) Ethernet Controller E830-C for backplane - 0x12D8: Intel(R) Ethernet Controller E830-C for QSFP - 0x12DA: Intel(R) Ethernet Controller E830-C for SFP - 0x12DC: Intel(R) Ethernet Controller E830-XXV for backplane - 0x12DD: Intel(R) Ethernet Controller E830-XXV for QSFP - 0x12DE: Intel(R) Ethernet Controller E830-XXV for SFP Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/filter.h kernel/bpf/core.c 66e13b615a0c ("bpf: verifier: prevent userspace memory access") d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT") https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30e1000e: change usleep_range to udelay in PHY mdic accessVitaly Lifshits
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems"). The referenced commit used usleep_range inside the PHY access routines, which are sometimes called from an atomic context. This can lead to a kernel panic in some scenarios, such as cable disconnection and reconnection on vPro systems. Solve this by changing the usleep_range calls back to udelay. Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by: Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/ Co-developed-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30i40e: Add and use helper to reconfigure TC for given VSIIvan Vecera
Add helper i40e_vsi_reconfig_tc(vsi) that configures TC for given VSI using previously stored TC bitmap. Effectively replaces open-coded patterns: enabled_tc = vsi->tc_config.enabled_tc; vsi->tc_config.enabled_tc = 0; i40e_vsi_config_tc(vsi, enabled_tc); Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Add helper to access main VEBIvan Vecera
Add a helper to access main VEB: i40e_pf_get_main_veb(pf) replaces 'pf->veb[pf->lan_veb]' Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Consolidate checks whether given VSI is mainIvan Vecera
In the driver code there are 3 types of checks whether given VSI is main or not: 1. vsi->type ==/!= I40E_VSI_MAIN 2. vsi ==/!= pf->vsi[pf->lan_vsi] 3. vsi->seid ==/!= pf->vsi[pf->lan_vsi]->seid All of them are equivalent and can be consolidated. Convert cases 2 and 3 to case 1. Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Add helper to access main VSIIvan Vecera
Add simple helper i40e_pf_get_main_vsi(pf) to access main VSI that replaces pattern 'pf->vsi[pf->lan_vsi]' Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 06:29:06 +0000