summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2021-04-13ixgbe: Support external GBE SerDes PHY BCM54616sJostar Yang
The Broadcom PHY is used in switches, so add the ID, and hook it up. This upstreams the Linux kernel patch from the network operating system SONiC from February 2020 [1]. [1]: https://github.com/Azure/sonic-linux-kernel/pull/122 Signed-off-by: Jostar Yang <jostar_yang@accton.com> Signed-off-by: Guohan Lu <lguohan@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ice: Fix potential infinite loop when using u8 loop counterColin Ian King
A for-loop is using a u8 loop counter that is being compared to a u32 cmp_dcbcfg->numapp to check for the end of the loop. If cmp_dcbcfg->numapp is larger than 255 then the counter j will wrap around to zero and hence an infinite loop occurs. Fix this by making counter j the same type as cmp_dcbcfg->numapp. Addresses-Coverity: ("Infinite loop") Fixes: aeac8ce864d9 ("ice: Recognize 860 as iSCSI port in CEE mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ixgbe: fix unbalanced device enable/disable in suspend/resumeYongxin Liu
pci_disable_device() called in __ixgbe_shutdown() decreases dev->enable_cnt by 1. pci_enable_device_mem() which increases dev->enable_cnt by 1, was removed from ixgbe_resume() in commit 6f82b2558735 ("ixgbe: use generic power management"). This caused unbalanced increase/decrease. So add pci_enable_device_mem() back. Fix the following call trace. ixgbe 0000:17:00.1: disabling already-disabled device Call Trace: __ixgbe_shutdown+0x10a/0x1e0 [ixgbe] ixgbe_suspend+0x32/0x70 [ixgbe] pci_pm_suspend+0x87/0x160 ? pci_pm_freeze+0xd0/0xd0 dpm_run_callback+0x42/0x170 __device_suspend+0x114/0x460 async_suspend+0x1f/0xa0 async_run_entry_fn+0x3c/0xf0 process_one_work+0x1dd/0x410 worker_thread+0x34/0x3f0 ? cancel_delayed_work+0x90/0x90 kthread+0x14c/0x170 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Fixes: 6f82b2558735 ("ixgbe: use generic power management") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ixgbe: Fix NULL pointer dereference in ethtool loopback testAlexander Duyck
The ixgbe driver currently generates a NULL pointer dereference when performing the ethtool loopback test. This is due to the fact that there isn't a q_vector associated with the test ring when it is setup as interrupts are not normally added to the test rings. To address this I have added code that will check for a q_vector before returning a napi_id value. If a q_vector is not present it will return a value of 0. Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path") Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-08ice: fix memory leak of aRFS after resuming from suspendYongxin Liu
In ice_suspend(), ice_clear_interrupt_scheme() is called, and then irq_free_descs() will be eventually called to free irq and its descriptor. In ice_resume(), ice_init_interrupt_scheme() is called to allocate new irqs. However, in ice_rebuild_arfs(), struct irq_glue and struct cpu_rmap maybe cannot be freed, if the irqs that released in ice_suspend() were reassigned to other devices, which makes irq descriptor's affinity_notify lost. So call ice_free_cpu_rx_rmap() before ice_clear_interrupt_scheme(), which can make sure all irq_glue and cpu_rmap can be correctly released before corresponding irq and descriptor are released. Fix the following memory leak. unreferenced object 0xffff95bd951afc00 (size 512): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 18 00 00 00 18 00 18 00 70 fc 1a 95 bd 95 ff ff ........p....... 00 00 ff ff 01 00 ff ff 02 00 ff ff 03 00 ff ff ................ backtrace: [<0000000072e4b914>] __kmalloc+0x336/0x540 [<0000000054642a87>] alloc_cpu_rmap+0x3b/0xb0 [<00000000f220deec>] ice_set_cpu_rx_rmap+0x6a/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff95bd81b0a2a0 (size 96): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 38 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 8............... b0 a2 b0 81 bd 95 ff ff b0 a2 b0 81 bd 95 ff ff ................ backtrace: [<00000000582dd5c5>] kmem_cache_alloc_trace+0x31f/0x4c0 [<000000002659850d>] irq_cpu_rmap_add+0x25/0xe0 [<00000000495a3055>] ice_set_cpu_rx_rmap+0xb4/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse warning: missing error code 'err'Arkadiusz Kubalewski
Set proper return values inside error checking if-statements. Previously following warning was produced when compiling against sparse. i40e_main.c:15162 i40e_init_recovery_mode() warn: missing error code 'err' Fixes: 4ff0ee1af0169 ("i40e: Introduce recovery mode support") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse error: 'vsi->netdev' could be nullArkadiusz Kubalewski
Remove vsi->netdev->name from the trace. This is redundant information. With the devinfo trace, the adapter is already identifiable. Previously following error was produced when compiling against sparse. i40e_main.c:2571 i40e_sync_vsi_filters() error: we previously assumed 'vsi->netdev' could be null (see line 2323) Fixes: b603f9dc20af ("i40e: Log info when PF is entering and leaving Allmulti mode.") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse error: uninitialized symbol 'ring'Arkadiusz Kubalewski
Init pointer with NULL in default switch case statement. Previously the error was produced when compiling against sparse. i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'. Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse errors in i40e_txrx.cArkadiusz Kubalewski
Remove error handling through pointers. Instead use plain int to return value from i40e_run_xdp(...). Previously: - sparse errors were produced during compilation: i40e_txrx.c:2338 i40e_run_xdp() error: (-2147483647) too low for ERR_PTR i40e_txrx.c:2558 i40e_clean_rx_irq() error: 'skb' dereferencing possible ERR_PTR() - sk_buff* was used to return value, but it has never had valid pointer to sk_buff. Returned value was always int handled as a pointer. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: 2e6893123830 ("i40e: split XDP_TX tail and XDP_REDIRECT map flushing") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix parameters in aq_get_phy_register()Grzegorz Siwik
Change parameters order in aq_get_phy_register() due to wrong statistics in PHY reported by ethtool. Previously all PHY statistics were exactly the same for all interfaces Now statistics are reported correctly - different for different interfaces Fixes: 0514db37dd78 ("i40e: Extend PHY access with page change flag") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove unnecessary blank lineTony Nguyen
Checkpatch reports the following, fix it. ----------------------------------------- drivers/net/ethernet/intel/ice/ice_main.c ----------------------------------------- CHECK:BRACES: Blank lines aren't necessary before a close brace '}' FILE: drivers/net/ethernet/intel/ice/ice_main.c:455: + +} Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-04-07ice: Remove unnecessary checks in add/kill_vid ndo opsBrett Creeley
Currently the driver is doing two unnecessary checks. First both ops are checking if the VLAN ID passed in is less than VLAN_N_VID and second both ops are checking to see if a port VLAN is configured on the VSI. The first check is already handled by the 8021q driver so this is an unnecessary check. The second check is unnecessary because the PF VSI is never put into a port VLAN. Remove these checks. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove rx_gro_dropped statAnirudh Venkataramanan
Tracking of the rx_gro_dropped statistic was removed in commit f73fc40327c0 ("ice: drop dead code in ice_receive_skb()"). Remove the associated variables and its reporting to ethtool stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Use local variable instead of pointer derefsAnirudh Venkataramanan
Replace multiple instances of vsi->back and pi->phy with equivalent local variables Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove unnecessary variableAnirudh Venkataramanan
In ice_init_phy_user_cfg, vsi is used only to get to hw. Remove this and just use pi->hw Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Limit forced overrides based on FW versionJeb Cramer
Beyond a specific version of firmware, there is no need to provide override values to the firmware when setting PHY capabilities. In this case, we do not need to indicate whether we're in Strict or Lenient Link Mode. In the case of translating capabilities to the configuration structure, the module compliance enforcement is already correctly set by firmware, so the extra code block is redundant. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Use default configuration mode for PHY configurationAnirudh Venkataramanan
Recent firmware supports a new "get PHY capabilities" mode ICE_AQC_REPORT_DFLT_CFG which makes it unnecessary for the driver to track and apply NVM based default link overrides. If FW AQ API version supports it, use Report Default Configuration. Add check function for Report Default Configuration support and update accordingly. Also change adv_phy_type_[lo|hi] to advert_phy_type[lo|hi] for clarity. Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Replace some memsets and memcpys with assignmentAnirudh Venkataramanan
In ice_set_link_ksettings, use assignment instead of memset/memcpy where possible Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Fix error return codes in ice_set_link_ksettingsAnirudh Venkataramanan
Return more appropriate error codes so that the right error message is communicated to the user by ethtool. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Rename a couple of variablesAnirudh Venkataramanan
In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to 'pi'. This is more consistent with similar usages elsewhere in the driver. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove unnecessary checker loopAnirudh Venkataramanan
The loop checking for PF VSI doesn't make any sense. The VSI type backing the netdev passed to ice_set_link_ksettings will always be of type ICE_PF_VSI. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Ignore EMODE return for opcode 0x0605Anirudh Venkataramanan
When link is owned by manageability, the driver is not allowed to fiddle with link. FW returns ICE_AQ_RC_EMODE if the driver attempts to do so. This patch adds a new function ice_set_link which abstracts the call to ice_aq_set_link_restart_an and provides a clean way to turn on/off link. While making this change, I also spotted that an int variable was being used to hold both an ice_status return code and the Linux errno return code. This pattern more often than not results in the driver inadvertently returning ice_status back to kernel which is a major boo-boo. Clean it up. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Align macro names to the specificationAnirudh Venkataramanan
For get PHY abilities AQ, the specification defines "report modes" as "with media", "without media" and "active configuration". For clarity, rename macros to align with the specification. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Modify recursive way of adding nodesVictor Raj
Remove the recursive way of adding the nodes to the layer in order to reduce the stack usage. Instead the algorithm is modified to use a while loop. The previous code was scanning recursively the nodes horizontally. The total stack consumption will be based on number of nodes present on that layer. In some cases it can consume more stack. Signed-off-by: Victor Raj <victor.raj@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Re-send some AQ commands, as result of EBUSY AQ errorChinh T Cao
Retry sending some AQ commands, as result of EBUSY AQ error. ice_aqc_opc_get_link_topo ice_aqc_opc_lldp_stop ice_aqc_opc_lldp_start ice_aqc_opc_lldp_filter_ctrl This change follows the latest guidelines from HW team. It is better to retry the same AQ command several times, as the result of EBUSY, instead of returning error to the caller right away. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01i40e: Fix display statistics for veb_tcEryk Rybak
If veb-stats was enabled, the ethtool stats triggered a warning due to invalid size: 'unexpected stat size for veb.tc_%u_tx_packets'. This was due to an incorrect structure definition for the statistics. Structures and functions have been improved in line with requirements for the presentation of statistics, in particular for the functions: 'i40e_add_ethtool_stats' and 'i40e_add_stat_strings'. Fixes: 1510ae0be2a4 ("i40e: convert VEB TC stats to use an i40e_stats array") Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01i40e: fix receiving of single packets in xsk zero-copy modeMagnus Karlsson
Fix so that single packets are received immediately instead of in batches of 8. If you sent 1 pps to a system, you received 8 packets every 8 seconds instead of 1 packet every second. The problem behind this was that the work_done reporting from the Tx part of the driver was broken. The work_done reporting in i40e controls not only the reporting back to the napi logic but also the setting of the interrupt throttling logic. When Tx or Rx reports that it has more to do, interrupts are throttled or coalesced and when they both report that they are done, interrupts are armed right away. If the wrong work_done value is returned, the logic will start to throttle interrupts in a situation where it should have just enabled them. This leads to the undesired batching behavior seen in user-space. Fix this by returning the correct boolean value from the Tx xsk zero-copy path. Return true if there is nothing to do or if we got fewer packets to process than we asked for. Return false if we got as many packets as the budget since there might be more packets we can process. Fixes: 3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance") Reported-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01i40e: Fix inconsistent indentingArkadiusz Kubalewski
Fixed new static analysis findings: "warn: inconsistent indenting" - introduced lately, reported with lkp and smatch build. Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Correct comment block styleTony Nguyen
The following is reported by checkpatch, correct it. ----------------------------------------------- drivers/net/ethernet/intel/ice/ice_adminq_cmd.h ----------------------------------------------- WARNING:NETWORKING_BLOCK_COMMENT_STYLE: networking block comments don't use an empty /* line, use /* Comment... FILE: drivers/net/ethernet/intel/ice/ice_adminq_cmd.h:1428: +/* + * Send to PF command (indirect 0x0801) ID is only used by PF Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-03-31ice: cleanup style issuesBruce Allan
A few style issues reported by checkpatch have snuck into the code; resolve the style issues. COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Consolidate VSI state and flagsAnirudh Venkataramanan
struct ice_vsi has two fields, state and flags which seem to be serving the same purpose. Consolidate them into one field 'state'. enum ice_state is used to represent state information of the PF. While some of these enum values can be use to represent VSI state, it makes more sense to represent VSI state with its own enum. So derive a new enum ice_vsi_state from ice_vsi_flags and ice_state and use it. Also rename enum ice_state to ice_pf_state for clarity. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Refactor ice_set/get_rss into LUT and key specific functionsBrett Creeley
Currently ice_set/get_rss are used to set/get the RSS LUT and/or RSS key. However nearly everywhere these functions are called only the LUT or key are set/get. Also, making this change reduces how many things ice_set/get_rss are doing. Fix this by adding ice_set/get_rss_lut and ice_set/get_rss_key functions. Also, consolidate all calls for setting/getting the RSS LUT and RSS Key to use ice_set/get_rss_lut() and ice_set/get_rss_key(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Refactor get/set RSS LUT to use struct parameterBrett Creeley
Update ice_aq_get_rss_lut() and ice_aq_set_rss_lut() to take a new structure ice_aq_get_set_rss_params instead of passing individual parameters. This is done for 2 reasons: 1. Reduce the number of parameters passed to the functions. 2. Reduce the amount of change required if the arguments ever need to be updated in the future. Also, reduce duplicate code that was checking for an invalid vsi_handle and lut parameter by moving the checks to the lower level __ice_aq_get_set_rss_lut(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Change ice_vsi_setup_q_map() to not depend on RSSBrett Creeley
Currently, ice_vsi_setup_q_map() depends on the VSI's rss_size. However, the Rx Queue Mapping section of the VSI context has no dependency on RSS. Instead, limit the maximum number of Rx queues per TC based on the Rx Queue mapping section of the VSI context, which currently allows for up to 256 Rx queues per TC. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: rename ptype bitmapQi Zhang
Align all ptype bitmap to follow ice_ptypes_xxx prefix. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: correct memory allocation callBruce Allan
Use *malloc() instead of *calloc() when allocating only a single object as opposed to an array of objects. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Check for bail out condition earlyAnirudh Venkataramanan
Check for bail out condition before calling ice_aq_sff_eeprom Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: remove unnecessary duplicated AQ command flag settingBruce Allan
Commit a012dca9f7a2 ("ice: add ethtool -m support for reading i2c eeprom modules") unnecessarily added the ICE_AQ_FLAG_BUF flag to the descriptor when sending the indirect Read/Write SFF EEPROM AQ command. The flag is already added later in the code flow for all indirect AQ commands, i.e. commands that provide an additional data buffer. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: change link misconfiguration messagePaul Greenwalt
Change link misconfiguration message since the configuration could be intended by the user. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: handle increasing Tx or Rx ring sizesPaul M Stillwell Jr
There is an issue when the Tx or Rx ring size increases using 'ethtool -L ...' where the new rings don't get the correct ITR values because when we rebuild the VSI we don't know that some of the rings may be new. Fix this by looking at the original number of rings and determining if the rings in ice_vsi_rebuild_set_coalesce() were not present in the original rings received in ice_vsi_rebuild_get_coalesce(). Also change the code to return an error if we can't allocate memory for the coalesce data in ice_vsi_rebuild(). Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Update to use package info from ice segmentDan Nowlin
There are two package versions in the package binary. Today, these two version numbers are the same. However, in the future that may change. Update code to use the package info from the ice segment metadata section, which is the package information that is actually downloaded to the firmware during the download package process. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Delay netdev registrationAnirudh Venkataramanan
Once a netdev is registered, the corresponding network interface can be immediately used by userspace utilities (like say NetworkManager). This can be problematic if the driver technically isn't fully up yet. Move netdev registration to the end of probe, as by this time the driver data structures and device will be initialized as expected. However, delaying netdev registration causes a failure in the aRFS flow where netdev->reg_state == NETREG_REGISTERED condition is checked. It's not clear why this check was added to begin with, so remove it. Local testing didn't indicate any issues with this change. The state bit check in ice_open was put in as a stop-gap measure to prevent a premature interface up operation. This is no longer needed, so remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Add Support for XPSBenita Bose
Enable and configure XPS. The driver code implemented sets up the Transmit Packet Steering Map, which in turn will be used by the kernel in queue selection during Tx. Signed-off-by: Benita Bose <benita.bose@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-30net: i40e: remove repeated wordsPeng Li
Remove repeated words "to" and "try". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29ice: Cleanup fltr list in case of allocation issuesRobert Malz
When ice_remove_vsi_lkup_fltr is called, by calling ice_add_to_vsi_fltr_list local copy of vsi filter list is created. If any issues during creation of vsi filter list occurs it up for the caller to free already allocated memory. This patch ensures proper memory deallocation in these cases. Fixes: 80d144c9ac82 ("ice: Refactor switch rule management structures and functions") Signed-off-by: Robert Malz <robertx.malz@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Use port number instead of PF ID for WoLAnirudh Venkataramanan
As per the spec, the WoL control word read from the NVM should be interpreted as port numbers, and not PF numbers. So when checking if WoL supported, use the port number instead of the PF ID. Also, ice_is_wol_supported doesn't really need a pointer to the pf struct, but just needs a pointer to the hw instance. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Fix for dereference of NULL pointerJacek Bułatek
Add handling of allocation fault for ice_vsi_list_map_info. Also *fi should not be NULL pointer, it is a reference to raw data field, so remove this variable and use the reference directly. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacek Bułatek <jacekx.bulatek@intel.com> Co-developed-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: remove DCBNL_DEVRESET bit from PF stateDave Ertman
The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: fix memory allocation callBruce Allan
Fix the order of number of array members and member size parameters in a *calloc() call. Fixes: b3c3890489f6 ("ice: avoid unnecessary single-member variable-length structs") Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 12:52:06 +0000