summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2018-03-23ixgbe: no need for esp trailer if GSOShannon Nelson
There is no need to calculate the trailer length if we're doing a GSO/TSO, as there is no trailer added to the packet data. Also, don't bother clearing the flags field as it was already cleared earlier. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbe: remove unneeded ipsec test in TX pathShannon Nelson
Since the ipsec data fields will be zero anyway in the non-ipsec case, we can remove the conditional jump. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbe: no need for ipsec csum feature checkShannon Nelson
With the patch commit f8aa2696b4af ("esp: check the NETIF_F_HW_ESP_TX_CSUM bit before segmenting") we no longer need to protect ourself from checksum offload requests on IPsec packets, so we can remove the check in our .ndo_features_check callback. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbe: fix read-modify-write in x550 phy setupPaul Greenwalt
Replaced an assignment operation with an OR operation. The variable assignment was overwriting the value read from the PHY register. The OR operation sets only the intended register bits. The bits that were being overwritten are reserved, so the assignment had no functional impact. Reported by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbe: add status reg reads to ixgbe_check_removePaul Greenwalt
Add status register reads and delay between reads to ixgbe_check_remove. Registers can read 0xFFFFFFFF during PCI reset, which causes the driver to remove the adapter. The additional status register reads can reduce the chance of this race condition. If the status register is not 0xFFFFFFFF, then ixgbe_check_remove returns the value of the register being read. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-19i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATEPaweł Jabłoński
This fixes the polling mechanism of GLGEN_RSTAT.DEVSTATE in the PF Reset path when Global Reset is in progress. While the driver is polling for the end of the PF Reset and the Global Reset is triggered, abandon the PF Reset path and prepare for the upcoming Global Reset. Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40evf: remove flags that are never usedJacob Keller
These flags were defined, but there is no use within the driver code, so we don't need to keep them. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Prevent setting link speed on I40E_DEV_ID_25G_BPatryk Małek
Setting link settings on backplane devices shouldn't be allowed. This patch adds one more device id to the list which we check that against. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Fix incorrect return typesDoug Dziggel
Fix return types from i40e_status to enum i40e_status_code. Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: add doxygen comment for new mode parameterJacob Keller
A recent patch updated the signature for i40e_aq_set_switch_config() to add a new parameter 'mode'. It forgot to document the parameter in the doxygen function header comment. Add the parameter to the function description now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Close client on suspend and restore client MSIx on resumeShiraz Saleem
During suspend client MSIx vectors are freed while they are still in use causing a crash on entering S3. Fix this calling client close before freeing up its MSIx vectors. Also update the client MSIx vectors on resume before client open is called. Fixes commit b980c0634fe5 ("i40e: shutdown all IRQs and disable MSI-X when suspended") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Prevent setting link speed on KX_X722Patryk Małek
Setting link settings on backplane devices shouldn't be allowed. This patch adds one more device id to the list which we check that against. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Properly check allowed advertisement capabilitiesJan Sokolowski
The i40e_set_link_ksettings and i40e_get_link_ksettings use different codepaths to check available and supported advertisement modes. This creates scenarios where it's possible to set a mode that's not allowed, resulting in a link down. Fix setting advertisement in i40e_set_link_ksettings by calling i40e_get_link_ksettings to check what modes are allowed. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40evf: Reorder configure_clsflower to avoid deadlock on errorAlexander Duyck
While doing some code review I noticed that we can get into a state where we exit with the "IN_CRITICAL_TASK" bit set while notifying the PF of flower filters. This patch is meant to address that plus tweak the ordering of the while loop waiting on it slightly so that we don't wait an extra period after we have failed for the last time. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: restore TCPv4 input set when re-enabling ATRJacob Keller
When we re-enable ATR we need to restore the input set for TCPv4 filters, in order for ATR to function correctly. We already do this for the normal case of re-enabling ATR when disabling ntuple support. However, when re-enabling ATR after the last TCPv4 filter is removed (but when ntuple support is still active), we did not restore the TCPv4 filter input set. This can cause problems if the TCPv4 filters from FDir had changed the input set, as ATR will no longer behave as expected. When clearing the ATR auto-disable flag, make sure we restore the TCPv4 input set to avoid this. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: fix for wrong partition id calculation on OCP mezz cardsMariusz Stachura
This patch overwrites number of ports for X722 devices with support for OCP PHY mezzanine. The old method with checking if port is disabled in the PRTGEN_CNF register cannot be used in this case. When the OCP is removed, ports were seen as disabled, which resulted in wrong calculation of partition id, that caused WoL to be disabled on certain ports. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: factor out re-enable functions for ATR and SBJacob Keller
A future patch needs to expand on the logic for re-enabling ATR. Doing so would cause some code to break the 80-character line limit. To reduce the level of indentation, factor out helper functions for re-enabling ATR and SB rules. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: track filter type statistics when deleting invalid filtersJacob Keller
When hardware has trouble with a particular filter, we delete it from the list. Unfortunately, we did not properly update the per-filter statistic when doing so. Create a helper function to handle this, and properly reduce the necessary counter so that it tracks the number of active filters properly. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: Fix permission check for VF MAC filtersFilip Sadowski
When VF requests adding of MAC filters the checking is done against number of already present MAC filters not adding them at the same time. It makes it possible to add a bunch of filters at once possibly exceeding acceptable limit of I40E_VC_MAX_MAC_ADDR_PER_VF filters. This happens because when checking vf->num_mac, we do not check how many filters are being requested at once. Modify the check function to ensure that it knows how many filters are being requested. This allows the check to ensure that the total number of filters in a single request does not cause us to go over the limit. Additionally, move the check to within the lock to ensure that the vf->num_mac is checked while holding the lock to maintain consistency. We could have simply moved the call to i40e_vf_check_permission to within the loop, but this could cause a request to be non-atomic, and add some but not all the addresses, while reporting an error code. We want to avoid this behavior so that users are not confused about which filters have or have not been added. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: Cleanup i40e_vlan_rx_registerJacob Keller
We used to use the function i40e_vlan_rx_register as a way to hook into the now defunct .ndo_vlan_rx_register netdev hook. This was removed but we kept the function around because we still used it internally to control enabling or disabling of VLAN stripping. As pointed out in upstream review, VLAN stripping is only used in a single location and the previous function is quite small, just inline it into i40e_restore_vlan() rather than carrying the function separately. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: Fix attach VF to VM issuePaweł Jabłoński
Fix for "Resource temporarily unavailable" problem when virsh is trying to attach a device to VM. When the VF driver is loaded on host and virsh is trying to attach it to the VM and set a MAC address, it ends with a race condition between i40e_reset_vf and i40e_ndo_set_vf_mac functions. The bug is fixed by adding polling in i40e_ndo_set_vf_mac function For when the VF is in Reset mode. Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40evf/i40evf_main: Fix variable assignment in i40evf_parse_cls_flowerGustavo A R Silva
It seems this is a copy-paste error and that the proper variable to use in this particular case is _src_ instead of _dst_. Addresses-Coverity-ID: 1465282 ("Copy-paste error") Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters") Signed-off-by: Gustavo A R Silva <garsilva@embeddedor.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-14i40e: remove i40e_fcoe filesCorentin Labbe
i40e_fcoe support was removed via commit 9eed69a9147c ("i40e: Drop FCoE code from core driver files") But this left files in place but un-compilable. Let's finish the cleaning. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: fix disabling hide VLAN on VF resetPaul Greenwalt
If port VLAN is enabled, set PFQDE.HIDE_VLAN during VF reset. Setting only PFQDE.PFQDE during VF reset was clearing PFQDE.HIDE_VLAN. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12e1000e: Fix link check race conditionBenjamin Poirier
Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338 Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12Revert "e1000e: Separate signaling for link check/link up"Benjamin Poirier
This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013. This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfbb34d is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbevf: fix unused variable warningArnd Bergmann
The new ixgbevf_set_rx_buffer_len() function causes a harmless warnings in configurations with large page size: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_set_rx_buffer_len': drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1758:15: error: unused variable 'max_frame' [-Werror=unused-variable] This rephrases the code so that the compiler can see the use of that variable, making it slightly easier to read in the process. Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: Add receive length error counterTonghao Zhang
ixgbe enabled rlec counter and the rx_error used it. We can export the counter directly via ethtool -S ethX. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: remove unneeded ipsec state free callbackShannon Nelson
With commit 7f05b467a735 ("xfrm: check for xdo_dev_state_free") we no longer need to add an empty callback function to the driver, so now let's remove the useless code. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: fix ipsec trailer lengthShannon Nelson
Fix up the Tx trailer length calculation. We can't believe the trailer len from the xstate information because it was calculated before the packet was put together and padding added. This bit of code finds the padding value in the trailer, adds it to the authentication length, and saves it so later we can put it into the Tx descriptor to tell the device where to stop the checksum calculation. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: check for 128-bit authenticationShannon Nelson
Make sure the Security Association is using a 128-bit authentication, since that's the only size that the hardware offload supports. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-07Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2018-03-05 This series contains updates to igb only. Corinna Vinschen adds the support for trusted VFs into the igb driver. Mika fixes an issue where PCIe device is physically unplugged can cause a kernel crash. This issue is that netif_device_detach() is called in these cases, which prevents netif_unregister() from bringing the device down properly. Christophe JAILLET fixes an issue with igb where HWTSTAMP_TX_ON was being handled like a bit mask and not a value. v2: dropped the e1000e fix from the series since I will be pushing it through David Miller's net tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05e1000e: allocate ring descriptors with dma_zalloc_coherentPierre-Yves Kerbrat
Descriptor rings were not initialized at zero when allocated When area contained garbage data, it caused skb_over_panic in e1000_clean_rx_irq (if data had E1000_RXD_STAT_DD bit set) This patch makes use of dma_zalloc_coherent to make sure the ring is memset at 0 to prevent the area from containing garbage. Following is the signature of the panic: IODDR0@0.0: skbuff: skb_over_panic: text:80407b20 len:64010 put:64010 head:ab46d800 data:ab46d842 tail:0xab47d24c end:0xab46df40 dev:eth0 IODDR0@0.0: BUG: failure at net/core/skbuff.c:105/skb_panic()! IODDR0@0.0: Kernel panic - not syncing: BUG! IODDR0@0.0: IODDR0@0.0: Process swapper/0 (pid: 0, threadinfo=81728000, task=8173cc00 ,cpu: 0) IODDR0@0.0: SP = <815a1c0c> IODDR0@0.0: Stack: 00000001 IODDR0@0.0: b2d89800 815e33ac IODDR0@0.0: ea73c040 00000001 IODDR0@0.0: 60040003 0000fa0a IODDR0@0.0: 00000002 IODDR0@0.0: IODDR0@0.0: 804540c0 815a1c70 IODDR0@0.0: b2744000 602ac070 IODDR0@0.0: 815a1c44 b2d89800 IODDR0@0.0: 8173cc00 815a1c08 IODDR0@0.0: IODDR0@0.0: 00000006 IODDR0@0.0: 815a1b50 00000000 IODDR0@0.0: 80079434 00000001 IODDR0@0.0: ab46df40 b2744000 IODDR0@0.0: b2d89800 IODDR0@0.0: IODDR0@0.0: 0000fa0a 8045745c IODDR0@0.0: 815a1c88 0000fa0a IODDR0@0.0: 80407b20 b2789f80 IODDR0@0.0: 00000005 80407b20 IODDR0@0.0: IODDR0@0.0: IODDR0@0.0: Call Trace: IODDR0@0.0: [<804540bc>] skb_panic+0xa4/0xa8 IODDR0@0.0: [<80079430>] console_unlock+0x2f8/0x6d0 IODDR0@0.0: [<80457458>] skb_put+0xa0/0xc0 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<804079c8>] e1000_clean_rx_irq+0x188/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80468b48>] __dev_kfree_skb_any+0x88/0xa8 IODDR0@0.0: [<804101ac>] e1000e_poll+0x94/0x288 IODDR0@0.0: [<8046e9d4>] net_rx_action+0x19c/0x4e8 IODDR0@0.0: ... IODDR0@0.0: Maximum depth to print reached. Use kstack=<maximum_depth_to_print> To specify a custom value (where 0 means to display the full backtrace) IODDR0@0.0: ---[ end Kernel panic - not syncing: BUG! Signed-off-by: Pierre-Yves Kerbrat <pkerbrat@kalray.eu> Signed-off-by: Marius Gligor <mgligor@kalray.eu> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Fix check_for_link return value with autoneg offBenjamin Poirier
When autoneg is off, the .check_for_link callback functions clear the get_link_status flag and systematically return a "pseudo-error". This means that the link is not detected as up until the next execution of the e1000_watchdog_task() 2 seconds later. Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Avoid missed interrupts following ICR readBenjamin Poirier
The 82574 specification update errata 12 states that interrupts may be missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by setting all bits related to events that can trigger the Other interrupt in IMS. The Other interrupt is raised for such events regardless of whether or not they are set in IMS. However, only when they are set is the INT_ASSERTED bit also set in ICR. By doing this, we ensure that INT_ASSERTED is always set when we read ICR in e1000_msix_other() and steer clear of the errata. This also ensures that ICR will automatically be cleared on read, therefore we no longer need to clear bits explicitly. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Fix queue interrupt re-raising in Other interruptBenjamin Poirier
Restores the ICS write for Rx/Tx queue interrupts which was present before commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1) but was not restored in commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). This re-raises the queue interrupts in case the txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05Partial revert "e1000e: Avoid receiver overrun interrupt bursts"Benjamin Poirier
This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.html Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Remove Other from EIACBenjamin Poirier
It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05igb: Fix a test with HWTSTAMP_TX_ONChristophe JAILLET
'HWTSTAMP_TX_ON' should be handled as a value, not as a bit mask. The modified code should behave the same, because HWTSTAMP_TX_ON is 1 and no other possible values of 'tx_type' would match the test. However, this is more future-proof, should other values be allowed one day. See 'struct hwtstamp_config' in 'include/uapi/linux/net_tstamp.h' This fixes a warning reported by smatch: igb_xmit_frame_ring() warn: bit shifter 'HWTSTAMP_TX_ON' used for logical '&' Fixes: 26bd4e2db06be ("igb: protect TX timestamping from API misuse") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05igb: Do not call netif_device_detach() when PCIe link goes missingMika Westerberg
When the driver notices that PCIe link is gone by reading 0xffffffff from a register it clears hw->hw_addr and then calls netif_device_detach(). This happens when the PCIe device is physically unplugged for example the user disconnected the Thunderbolt cable. However, netif_device_detach() prevents netif_unregister() from bringing the device down properly including tearing down MSI-X vectors. This triggers following crash during the driver removal: igb 0000:0b:00.0 enp11s0f0: PCIe link lost, device now detached ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:352! invalid opcode: 0000 [#1] PREEMPT SMP PTI ... Call Trace: pci_disable_msix+0xc9/0xf0 igb_reset_interrupt_capability+0x58/0x60 [igb] igb_remove+0x90/0x100 [igb] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x152/0x210 pci_stop_bus_device+0x78/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_bus_device+0x26/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_and_remove_bus_device+0x9/0x20 trim_stale_devices+0xee/0x130 ? _raw_spin_unlock_irqrestore+0xf/0x30 trim_stale_devices+0x8f/0x130 ? _raw_spin_unlock_irqrestore+0xf/0x30 trim_stale_devices+0xa1/0x130 ? get_slot_status+0x8b/0xc0 acpiphp_check_bridge.part.7+0xf9/0x140 acpiphp_hotplug_notify+0x170/0x1f0 ... To prevent the crash do not call netif_device_detach() in igb_rd32(). This should be fine because hw->hw_addr is set to NULL preventing future hardware access of the now missing device. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198181 Reported-by: Ferenc Boldog <ferenc.boldog@gmail.com> Reported-by: Nikolay Bogoychev <nheart@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05igb: add VF trust infrastructureCorinna Vinschen
* Add a per-VF value to know if a VF is trusted, by default don't trust VFs. * Implement netdev op to trust VFs (igb_ndo_set_vf_trust) and add trust status to ndo_get_vf_config output. * Allow a trusted VF to change MAC and MAC filters even if MAC has been administratively set. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-28fm10k: bump version numberJacob Keller
We're aligned with latest version released on SourceForge, so update the version number to match. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-28fm10k: fix incorrect warning for function prototypeJacob Keller
Recent kernels now complain about incorrect function prototype comments, in order to ensure comments are accurate to the function. However, it incorrectly associates the comment above the fm10k_pci_tbl[] as a function header comment. Fix this by removing the extra "*" in the comment. This normally indicates that the function is a doxygen style function header comment. Once removed, the logic no longer kicks in and the following warning is fixed: warning: cannot understand function prototype: 'const struct pci_device_id fm10k_pci_tbl[] = ' Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-28fm10k: fix function doxygen commentsJacob Keller
Several function header comments had incorrect function parameter definitions. Recent versions of the upstream kernel have started to warn about these issues. Fix up the comments which do not match in order to resolve these new warnings. While fixing these, update the copyright year also. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-27Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-02-26 This series contains updates to i40e and i40evf only. Mariusz adds a new ethtool private flag for forcing true link state with the requested changes from Jakub Kicinski. Paweł fixes an issue where we were double locking the same resource which would generate a kernel panic after bringing an interface up for i40evf. Alan modifies both drivers to use software values to determine if there are packets stalled on the ring with the added benefit of being less CPU intensive since we do not need to reach into the hardware to get the values. Colin Ian King provides a few fixes detected by Coverity, first was to pass a struct by reference versus by value to be more efficient. Then verify the VSI pointer is not NULL before trying to dereference it. Cleaned up redundant checks that always return true. Dan Carpenter fixes over indented lines of code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26i40e: remove some stray indentingDan Carpenter
These two lines are indented too far. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26i40evf: remove redundant array comparisons to 0 checksColin Ian King
The checks to see if key->dst.s6_addr and key->src.s6_addr are null pointers are redundant because these are constant size arrays and so the checks always return true. Fix this by removing the redundant checks. Also replace filter->f with vf, allowing wide lines to be condensed and to rejoin some split wide lines. Detected by CoverityScan, CID#1465279 ("Array compared to 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 11:00:20 +0000