| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 27717f8b17c098c4373ddb8fe89e1a1899c7779d ]
Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment
and lockdep assert to indicate that. This is needed to share the same TX
ring between XDP, XSK and slow paths. Furthermore, the current XDP
implementation is racy on tail updates.
Fixes: 9cbc948b5a20 ("igb: add XDP support")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add lockdep assert and fixes tag]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d2940002b0aa42898de815a1453b29d440292386 ]
The description of function ice_find_vsi_list_entry says:
Search VSI list map with VSI count 1
However, since the blamed commit (see Fixes below), the function no
longer checks vsi_count. This causes a problem in ice_add_vlan_internal,
where the decision to share VSI lists between filter rules relies on the
vsi_count of the found existing VSI list being 1.
The reproducing steps:
1. Have a PF and two VFs.
There will be a filter rule for VLAN 0, referring to a VSI list
containing VSIs: 0 (PF), 2 (VF#0), 3 (VF#1).
2. Add VLAN 1234 to VF#0.
ice will make the wrong decision to share the VSI list with the new
rule. The wrong behavior may not be immediately apparent, but it can
be observed with debug prints.
3. Add VLAN 1234 to VF#1.
ice will unshare the VSI list for the VLAN 1234 rule. Due to the
earlier bad decision, the newly created VSI list will contain
VSIs 0 (PF) and 3 (VF#1), instead of expected 2 (VF#0) and 3 (VF#1).
4. Try pinging a network peer over the VLAN interface on VF#0.
This fails.
Reproducer script at:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/test-vlan-vsi-list-confusion.sh
Commented debug trace:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/ice-vlan-vsi-lists-debug.txt
Patch adding the debug prints:
https://gitlab.com/mschmidt2/linux/-/commit/f8a8814623944a45091a77c6094c40bfe726bfdb
(Unsafe, by the way. Lacks rule_lock when dumping in ice_remove_vlan.)
Michal Swiatkowski added to the explanation that the bug is caused by
reusing a VSI list created for VLAN 0. All created VFs' VSIs are added
to VLAN 0 filter. When a non-zero VLAN is created on a VF which is already
in VLAN 0 (normal case), the VSI list from VLAN 0 is reused.
It leads to a problem because all VFs (VSIs to be specific) that are
subscribed to VLAN 0 will now receive a new VLAN tag traffic. This is
one bug, another is the bug described above. Removing filters from
one VF will remove VLAN filter from the previous VF. It happens a VF is
reset. Example:
- creation of 3 VFs
- we have VSI list (used for VLAN 0) [0 (pf), 2 (vf1), 3 (vf2), 4 (vf3)]
- we are adding VLAN 100 on VF1, we are reusing the previous list
because 2 is there
- VLAN traffic works fine, but VLAN 100 tagged traffic can be received
on all VSIs from the list (for example broadcast or unicast)
- trust is turning on VF2, VF2 is resetting, all filters from VF2 are
removed; the VLAN 100 filter is also removed because 3 is on the list
- VLAN traffic to VF1 isn't working anymore, there is a need to recreate
VLAN interface to readd VLAN filter
One thing I'm not certain about is the implications for the LAG feature,
which is another caller of ice_find_vsi_list_entry. I don't have a
LAG-capable card at hand to test.
Fixes: 23ccae5ce15f ("ice: changes to the interface with the HW and FW for SRIOV_VF+LAG")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Dave Ertman <David.m.ertman@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e843cf7b34fe2e0c1afc55e1f3057375c9b77a14 ]
When adding a switch filter (such as a MAC or VLAN filter), it is expected
that the driver will detect the case where the filter already exists, and
return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr,
and ice_vsi_add_vlan to avoid incrementing the accounting fields such as
vsi->num_vlan or vf->num_mac.
This logic works correctly for the case where only a single VSI has added a
given switch filter.
When a second VSI adds the same switch filter, the driver converts the
existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST
filter. This saves switch resources, by ensuring that multiple VSIs can
re-use the same filter.
The ice_add_update_vsi_list() function is responsible for doing this
conversion. When first converting a filter from the FWD_TO_VSI into
FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the
existing rule's VSI. In such a case it returns -EEXIST.
However, when the switch rule has already been converted to a
FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just
requires extending the VSI list entry. The logic for checking if the rule
already exists in this case returns 0 instead of -EEXIST.
This breaks the accounting logic mentioned above, so the counters for how
many MAC and VLAN filters exist for a given VF or VSI no longer accurately
reflect the actual count. This breaks other code which relies on these
counts.
In typical usage this primarily affects such filters generally shared by
multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses.
Fix this by correctly reporting -EEXIST in the case of adding the same VSI
to a switch rule already converted to ICE_FWD_TO_VSI_LIST.
Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9debb703e14939dfafa5d403f27c4feb2e9f6501 ]
After vsi setup refactor commit 6624e780a577 ("ice: split ice_vsi_setup
into smaller functions") ice_cfg_sw_lldp function which removes rx rule
directing LLDP packets to vsi is moved from ice_vsi_release to
ice_vsi_decfg function. ice_vsi_decfg is used in more cases than just in
vsi_release resulting in unnecessary removal of rx lldp packets handling
switch rule. This leads to lldp packets being dropped after a change number
of channels via ethtool.
This patch moves ice_cfg_sw_lldp function that removes rx lldp sw rule back
to ice_vsi_release function.
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Matěj Grégr <mgregr@netx.as>
Closes: https://lore.kernel.org/intel-wired-lan/1be45a76-90af-4813-824f-8398b69745a9@netx.as/T/#u
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ba54b1a276a6b69d80649942fe5334d19851443e upstream.
Refactoring of the field get conversion introduced a regression in the
legacy Wake On Lan from a magic packet with i219 devices. Rx address
copied not correctly from MAC to PHY with FIELD_GET macro.
Fixes: b9a452545075 ("intel: legacy: field get conversion")
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Florian Larysch <fl@n621.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 04c7e14e5b0b6227e7b00d7a96ca2f2426ab9171 ]
After XDP configuration is completed, we bring the interface up
unconditionally, regardless of its state before the call to .ndo_bpf().
Preserve the information whether the interface had to be brought down and
later bring it up only in such case.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2504b8405768a57a71e660dbfd5abd59f679a03f ]
The main threat to data consistency in ice_xdp() is a possible asynchronous
PF reset. It can be triggered by a user or by TX timeout handler.
XDP setup and PF reset code access the same resources in the following
sections:
* ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked
* ice_vsi_rebuild() for the PF VSI - not protected
* ice_vsi_open() - already rtnl-locked
With an unfortunate timing, such accesses can result in a crash such as the
one below:
[ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14
[ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18
[Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms
[ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001
[ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14
[ +0.394718] ice 0000:b1:00.0: PTP reset successful
[ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ +0.000045] #PF: supervisor read access in kernel mode
[ +0.000023] #PF: error_code(0x0000) - not-present page
[ +0.000023] PGD 0 P4D 0
[ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1
[ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[ +0.000036] Workqueue: ice ice_service_task [ice]
[ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice]
[...]
[ +0.000013] Call Trace:
[ +0.000016] <TASK>
[ +0.000014] ? __die+0x1f/0x70
[ +0.000029] ? page_fault_oops+0x171/0x4f0
[ +0.000029] ? schedule+0x3b/0xd0
[ +0.000027] ? exc_page_fault+0x7b/0x180
[ +0.000022] ? asm_exc_page_fault+0x22/0x30
[ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice]
[ +0.000194] ice_free_tx_ring+0xe/0x60 [ice]
[ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice]
[ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice]
[ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice]
[ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice]
[ +0.000145] ice_rebuild+0x18c/0x840 [ice]
[ +0.000145] ? delay_tsc+0x4a/0xc0
[ +0.000022] ? delay_tsc+0x92/0xc0
[ +0.000020] ice_do_reset+0x140/0x180 [ice]
[ +0.000886] ice_service_task+0x404/0x1030 [ice]
[ +0.000824] process_one_work+0x171/0x340
[ +0.000685] worker_thread+0x277/0x3a0
[ +0.000675] ? preempt_count_add+0x6a/0xa0
[ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50
[ +0.000679] ? __pfx_worker_thread+0x10/0x10
[ +0.000653] kthread+0xf0/0x120
[ +0.000635] ? __pfx_kthread+0x10/0x10
[ +0.000616] ret_from_fork+0x2d/0x50
[ +0.000612] ? __pfx_kthread+0x10/0x10
[ +0.000604] ret_from_fork_asm+0x1b/0x30
[ +0.000604] </TASK>
The previous way of handling this through returning -EBUSY is not viable,
particularly when destroying AF_XDP socket, because the kernel proceeds
with removal anyway.
There is plenty of code between those calls and there is no need to create
a large critical section that covers all of them, same as there is no need
to protect ice_vsi_rebuild() with rtnl_lock().
Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp().
Leaving unprotected sections in between would result in two states that
have to be considered:
1. when the VSI is closed, but not yet rebuild
2. when VSI is already rebuild, but not yet open
The latter case is actually already handled through !netif_running() case,
we just need to adjust flag checking a little. The former one is not as
trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of
hardware interaction happens, this can make adding/deleting rings exit
with an error. Luckily, VSI rebuild is pending and can apply new
configuration for us in a managed fashion.
Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to
indicate that ice_xdp() can just hot-swap the program.
Also, as ice_vsi_rebuild() flow is touched in this patch, make it more
consistent by deconfiguring VSI when coalesce allocation fails.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef4a99a0164e3972abb421cbb1b09ea6c61414df ]
Call rtnl_unlock() on this error path, before returning.
Fixes: bc23aa949aeb ("igc: Add pcie error handler support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d11a67634227f9f9da51938af085fb41a733848f ]
Ethtool callbacks can be executed while reset is in progress and try to
access deleted resources, e.g. getting coalesce settings can result in a
NULL pointer dereference seen below.
Reproduction steps:
Once the driver is fully initialized, trigger reset:
# echo 1 > /sys/class/net/<interface>/device/reset
when reset is in progress try to get coalesce settings using ethtool:
# ethtool -c <interface>
BUG: kernel NULL pointer dereference, address: 0000000000000020
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7
RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice]
RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206
RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000
R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40
FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0
Call Trace:
<TASK>
ice_get_coalesce+0x17/0x30 [ice]
coalesce_prepare_data+0x61/0x80
ethnl_default_doit+0xde/0x340
genl_family_rcv_msg_doit+0xf2/0x150
genl_rcv_msg+0x1b3/0x2c0
netlink_rcv_skb+0x5b/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x19c/0x290
netlink_sendmsg+0x222/0x490
__sys_sendto+0x1df/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7faee60d8e27
Calling netif_device_detach() before reset makes the net core not call
the driver when ethtool command is issued, the attempt to execute an
ethtool command during reset will result in the following message:
netlink error: No such device
instead of NULL pointer dereference. Once reset is done and
ice_rebuild() is executing, the netif_device_attach() is called to allow
for ethtool operations to occur again in a safe manner.
Fixes: fcea6f3da546 ("ice: Add stats and ethtool support")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba8cf80724dbc09825b52498e4efacb563935408 ]
82580 NICs have a hardware bug that makes it
necessary to write into the TSICR (TimeSync Interrupt Cause) register
to clear it:
https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/
Add a conditional so only for 82580 we write into the TSICR register,
so we don't risk losing events for other models.
Without this change, when running ptp4l with an Intel 82580 card,
I get the following output:
> timed out while polling for tx timestamp increasing tx_timestamp_timeout or
> increasing kworker priority may correct this issue, but a driver bug likely
> causes it
This goes away with this change.
This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events").
Fixes: ee14cc9ea19b ("igb: Fix missing time sync events")
Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/
Tested-by: Daiwei Li <daiweili@google.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Daiwei Li <daiweili@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d47bf9a495cf424fad674321d943123dc12b926d ]
Check the return value from ice_vsi_rebuild() and prevent the usage of
incorrectly configured VSI.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6c3fc0b1c3d073bd6fc3bf43dbd0e64240537464 upstream.
A large tx latency issue was discovered during testing when only QBV was
enabled. The issue occurs because gtxoffset was not set when QBV is
active, it was only set when launch time is active.
The patch "igc: Correct the launchtime offset" only sets gtxoffset when
the launchtime_enable field is set by the user. Enabling launchtime_enable
ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as
LaunchT in the SW user manual).
Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states:
"The latency between transmission scheduling (launch time) and the
time the packet is transmitted to the network is listed in Table 7-61."
However, the patch misinterprets the phrase "launch time" in that section
by assuming it specifically refers to the LaunchT register, whereas it
actually denotes the generic term for when a packet is released from the
internal buffer to the MAC transmit logic.
This launch time, as per that section, also implicitly refers to the QBV
gate open time, where a packet waits in the buffer for the QBV gate to
open. Therefore, latency applies whenever QBV is in use. TSN features such
as QBU and QAV reuse QBV, making the latency universal to TSN features.
Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that
the term "launch time" used in Section 7.5.2.6 is not clear and can be
easily misinterpreted. Avi will update this section to:
"When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission
scheduling and the time the packet is transmitted to the network is listed
in Table 7-61."
Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to
write to gtxoffset, aligning with the newly updated SW User Manual.
Tested:
1. Enrol taprio on talker board
base-time 0
cycle-time 1000000
flags 0x2
index 0 cmd S gatemask 0x1 interval1
index 0 cmd S gatemask 0x1 interval2
Note:
interval1 = interval for a 64 bytes packet to go through
interval2 = cycle-time - interval1
2. Take tcpdump on listener board
3. Use udp tai app on talker to send packets to listener
4. Check the timestamp on listener via wireshark
Test Result:
100 Mbps: 113 ~193 ns
1000 Mbps: 52 ~ 84 ns
2500 Mbps: 95 ~ 223 ns
Note that the test result is similar to the patch "igc: Correct the
launchtime offset".
Fixes: 790835fcc0cb ("igc: Correct the launchtime offset")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8aba27c4a5020abdf60149239198297f88338a8d ]
Sabrina reports that the igb driver does not cope well with large
MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload
corruption on TX.
An easy reproducer is to run ssh to connect to the machine. With
MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has
been reported originally in
https://bugzilla.redhat.com/show_bug.cgi?id=2265320
The root cause of the issue is that the driver does not take into
account properly the (possibly large) shared info size when selecting
the ring layout, and will try to fit two packets inside the same 4K
page even when the 1st fraglist will trump over the 2nd head.
Address the issue by checking if 2K buffers are insufficient.
Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reported-by: Jan Tluka <jtluka@redhat.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Link: https://patch.msgid.link/20240816152034.1453285-1-vinschen@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d53d4dcce69be5773e2d0878c9899ebfbf58c393 ]
When working on multi-buffer packet on arch that has PAGE_SIZE >= 8192,
truesize is calculated and stored in xdp_buff::frame_sz per each
processed Rx buffer. This means that frame_sz will contain the truesize
based on last received buffer, but commit 1dc1a7e7f410 ("ice:
Centrallize Rx buffer recycling") assumed this value will be constant
for each buffer, which breaks the page recycling scheme and mess up the
way we update the page::page_offset.
To fix this, let us work on constant truesize when PAGE_SIZE >= 8192
instead of basing this on size of a packet read from Rx descriptor. This
way we can simplify the code and avoid calculating truesize per each
received frame and on top of that when using
xdp_update_skb_shared_info(), current formula for truesize update will
be valid.
This means ice_rx_frame_truesize() can be removed altogether.
Furthermore, first call to it within ice_clean_rx_irq() for 4k PAGE_SIZE
was redundant as xdp_buff::frame_sz is initialized via xdp_init_buff()
in ice_vsi_cfg_rxq(). This should have been removed at the point where
xdp_buff struct started to be a member of ice_rx_ring and it was no
longer a stack based variable.
There are two fixes tags as my understanding is that the first one
exposed us to broken truesize and page_offset handling and then second
introduced broken skb_shared_info update in ice_{construct,build}_skb().
Reported-and-tested-by: Luiz Capitulino <luizcap@redhat.com>
Closes: https://lore.kernel.org/netdev/8f9e2a5c-fd30-4206-9311-946a06d031bb@redhat.com/
Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling")
Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b966ad832942b5a11e002f9b5ef102b08425b84a ]
For bigger PAGE_SIZE archs, ice driver works on 3k Rx buffers.
Therefore, ICE_LAST_OFFSET should take into account ICE_RXBUF_3072, not
ICE_RXBUF_2048.
Fixes: 7237f5b0dba4 ("ice: introduce legacy Rx flag")
Suggested-by: Luiz Capitulino <luizcap@redhat.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50b2143356e888777fc5bca023c39f34f404613a ]
Architectures that have PAGE_SIZE >= 8192 such as arm64 should act the
same as x86 currently, meaning reuse of a page should only take place
when no one else is busy with it.
Do two things independently of underlying PAGE_SIZE:
- store the page count under ice_rx_buf::pgcnt
- then act upon its value vs ice_rx_buf::pagecnt_bias when making the
decision regarding page reuse
Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0afeaeb5dae86aceded0d5f0c3a54d27858c0c6f ]
Following the "igc: Fix TX Hang issue when QBV Gate is close" changes,
remaining issues with the reset adapter logic in igc_tsn_offload_apply()
have been observed:
1. The reset adapter logics for i225 and i226 differ, although they should
be the same according to the guidelines in I225/6 HW Design Section
7.5.2.1 on software initialization during tx mode changes.
2. The i225 resets adapter every time, even though tx mode doesn't change.
This occurs solely based on the condition igc_is_device_id_i225() when
calling schedule_work().
3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only
resets adapter for legacy->tsn tx mode transitions.
4. qbv_count introduced in the patch is actually not needed; in this
context, a non-zero value of qbv_count is used to indicate if tx mode
was unconditionally set to tsn in igc_tsn_enable_offload(). This could
be replaced by checking the existing register
IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit.
This patch resolves all issues and enters schedule_work() to reset the
adapter only when changing tx mode. It also removes reliance on qbv_count.
qbv_count field will be removed in a future patch.
Test ran:
1. Verify reset adapter behaviour in i225/6:
a) Enrol a new GCL
Reset adapter observed (tx mode change legacy->tsn)
b) Enrol a new GCL without deleting qdisc
No reset adapter observed (tx mode remain tsn->tsn)
c) Delete qdisc
Reset adapter observed (tx mode change tsn->legacy)
2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed"
to confirm it remains resolved.
Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8d6acaee9d35cbff3c3cfad94641666c596f8da ]
When user issues these cmds:
1. Either a) or b)
a) mqprio with hardware offload disabled
b) taprio with txtime-assist feature enabled
2. etf
3. tc qdisc delete
4. taprio with base time in the past
At step 4, qbv_config_change_errors wrongly increased by 1.
Excerpt from IEEE 802.1Q-2018 8.6.9.3.1:
"If AdminBaseTime specifies a time in the past, and the current schedule
is running, then: Increment ConfigChangeError counter"
qbv_config_change_errors should only increase if base time is in the past
and no taprio is active. In user perspective, taprio was not active when
first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is
enabled with a dummy schedule at step 2 where it enters
igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it
enters igc_tsn_enable_offload() again, qbv_count is incremented to 2.
Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and
qbv_count > 1, qbv_config_change_errors value got incremented.
This issue happens due to reliance on qbv_count field where a non-zero
value indicates that taprio is running. But qbv_count increases
regardless if taprio is triggered by user or by other tsn feature. It does
not align with qbv_config_change_errors expectation where it is only
concerned with taprio triggered by user.
Fixing this by relocating the qbv_config_change_errors logic to
igc_save_qbv_schedule(), eliminating reliance on qbv_count and its
inaccuracies from i225/6's multiple uses of qbv feature for other TSN
features.
The new function created: igc_tsn_is_taprio_activated_by_user() uses
taprio_offload_enable field to indicate that the current running taprio
was triggered by user, instead of triggered by non-qbv feature like etf.
Fixes: ae4fe4698300 ("igc: Add qbv_config_change_errors counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e037a26ead187901f83cad9c503ccece5ff6817a ]
Testing uncovered that even when the taprio gate is closed, some packets
still transmit.
According to i225/6 hardware errata [1], traffic might overflow the
planned QBV window. This happens because MAC maintains an internal buffer,
primarily for supporting half duplex retries. Therefore, even when the
gate closes, residual MAC data in the buffer may still transmit.
To mitigate this for i226, reduce the MAC's internal buffer from 192 bytes
to the recommended 88 bytes by modifying the RETX_CTL register value.
This follows guidelines from:
[1] Ethernet Controller I225/I22 Spec Update Rev 2.1 Errata Item 9:
TSN: Packet Transmission Might Cross Qbv Window
[2] I225/6 SW User Manual Rev 1.2.4: Section 8.11.5 Retry Buffer Control
Note that the RETX_CTL register can't be used in TSN mode because half
duplex feature cannot coexist with TSN.
Test Steps:
1. Send taprio cmd to board A:
tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 4 \
map 3 2 1 0 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time 0 \
sched-entry S 0x07 500000 \
sched-entry S 0x0f 500000 \
flags 0x2 \
txtime-delay 0
Note that for TC3, gate should open for 500us and close for another
500us.
3. Take tcpdump log on Board B.
4. Send udp packets via UDP tai app from Board A to Board B.
5. Analyze tcpdump log via wireshark log on Board B. Ensure that the
total time from the first to the last packet received during one cycle
for TC3 does not exceed 500us.
Fixes: 43546211738e ("igc: Add new device ID's")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25a7123579ecac9a89a7e5b8d8a580bee4b68acd ]
Synchronize OICR IRQ when preparing for reset to avoid potential
race conditions between the reset procedure and OICR
Fixes: 4aad5335969f ("ice: add individual interrupt allocation")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b9e7fc0aeda79031a101610b2fcb12bf031056e9 ]
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6044ca26210ba72b3dcc649fae1cbedd9e6ab018 ]
It is read by data path and modified from process context on remote cpu
so it is needed to use WRITE_ONCE to clear the pointer.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 405d9999aa0b4ae467ef391d1d9c7e0d30ad0841 ]
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.
Additionally, turn off regular Tx queue before disabling irqs and NAPI.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ff72a2f67791cd4ddad19ed830445f57b30e992 ]
When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b033f ("ice: Add support to
enable/disable all Rx queues before waiting").
To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec145a18687fec8dd97eeb4f30057fa4debef577 ]
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.
Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.
Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.
Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19abb9c2b900bad59e0a9818d6c83bb4cc875437 ]
When ice driver reads recipes from firmware information about
need_pass_l2 and allow_pass_l2 flags is not stored correctly.
Those flags are stored as one bit each in ice_sw_recipe structure.
Because of that, the result of checking a flag has to be casted to bool.
Note that the need_pass_l2 flag currently works correctly, because
it's stored in the first bit.
Fixes: bccd9bce29e0 ("ice: Add guard rule when creating FDB in switchdev")
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6ebbe97a488179f5dc85f2f1e0c89b486e99ee97 upstream.
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice.
CC: stable@vger.kernel.org
Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Suggested-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8b9b59e27aa88ba133fbac85def3f8be67f2d5a8 ]
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a547 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a547 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01fc5142ae6b06b61ed51a624f2732d6525d8ea3 ]
The commit 6533e558c650 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks.
Fixes: 6533e558c650 ("i40e: Fix reset path while removing the driver")
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8eef5c3cea65f248c99cd9dcb3f84c6509b78162 upstream.
This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b.
igc_ptp_init() needs to be called before igc_reset(), otherwise kernel
crash could be observed. Following the corresponding discussion [1] and
[2] revert this commit.
Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1]
Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2]
Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c93a6f62cb1bd097aef2e4588648a420d175eee2 ]
On vPro systems, the configuration of the I219-LM to achieve power
gating and S0ix residency is split between the driver and the CSME FW.
It was discovered that in some scenarios, where the network cable is
connected and then disconnected, S0ix residency is not always reached.
This was root-caused to a subset of I219-LM register writes that are not
performed by the CSME FW. Therefore, the driver should perform these
register writes on corporate setups, regardless of the CSME FW state.
This was discovered on Meteor Lake systems; however it is likely to
appear on other platforms as well.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218589
Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240628201754.2744221-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86167183a17e03ec77198897975e9fdfbd53cb0b ]
During successful probe, igc logs this:
[ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The reason is that igc_ptp_init() is called very early, even before
register_netdev() has been called. So the netdev_info() call works
on a partially uninitialized netdev.
Fix this by calling igc_ptp_init() after register_netdev(), right
after the media autosense check, just as in igb. Add a comment,
just as in igb.
Now the log message is fine:
[ 5.200987] igc 0000:01:00.0 eth0: PHC added
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4b91c1d17c676b8ad4c6bd674da874f3f7d5701 ]
TC queues needs to be correctly updated when the number of queues on
a VSI is reconfigured, so netdev's queue and TC settings will be
dynamically adjusted and could accurately represent the underlying
hardware state after changes to the VSI queue counts.
Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74382aebc9035470ec4c789bdb0d09d8c14f261e ]
Adding/updating VSI list rule, as well as allocating/freeing VSI list
resource are called several times with type ICE_SW_LKUP_LAST, which fails
because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list()
consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST.
This fixes at least one issue in switchdev mode, where the same rule with
different action cannot be added, e.g.:
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF1_PR
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF2_PR
Fixes: 0f94570d0cae ("ice: allow adding advanced rules")
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240618210206.981885-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc69ad74867dba1377abe14356c94a946d9837a3 ]
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
that irdma would break and report hardware initialization failed after
suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).
The problem is caused due to the collision between the irq numbers
requested in irdma and the irq numbers requested in other drivers
after suspend/resume.
The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
which stores mappings between MSI-X index and Linux interrupt number.
It's supposed to be cleaned up when suspend and rebuilt in resume but
it's not, causing irdma using the old irq numbers stored in the old
ice_pf->msix_entries to request_irq() when resume. And eventually
collide with other drivers.
This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
irdma if we've dynamically allocated them). On resume, we call
ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
MSI-X vectors if we would like to dynamically allocate them).
Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 744d197162c2070a6045a71e2666ed93a57cc65d ]
Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in
the rebuild process. The behaviour of the XDP rings config functions is
context-dependent, so the change of order has led to
ice_destroy_xdp_rings() doing additional work and removing XDP prog, when
it was supposed to be preserved.
Also, dependency on the PF state reset flags creates an additional,
fortunately less common problem:
* PFR is requested e.g. by tx_timeout handler
* .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(),
but reset flag is set, so rings are destroyed without deleting the
program
* ice_vsi_rebuild tries to delete non-existent XDP rings, because the
program is still on the VSI
* system crashes
With a similar race, when requested to attach a program,
ice_prepare_xdp_rings() can actually skip setting the program in the VSI
and nevertheless report success.
Instead of reverting to the old order of function calls, add an enum
argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in
order to distinguish between calls from rebuild and .ndo_bpf().
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit adbf5a42341f6ea038d3626cd4437d9f0ad0b2dd ]
Referenced commit has introduced a bitmap to distinguish between ZC and
copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this
for us.
The bitmap would be especially useful when restoring previous state after
rebuild, if only it was not reallocated in the process. This leads to e.g.
xdpsock dying after changing number of queues.
Instead of preserving the bitmap during the rebuild, remove it completely
and distinguish between ZC and copy-mode queues based on the presence of
a device associated with the pool.
Fixes: e102db780e1c ("ice: track AF_XDP ZC enabled queues in bitmap")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03e4a092be8ce3de7c1baa7ae14e68b64e3ea644 ]
The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value
structures in the Preserved Fields Area (PFA) of the NVM. This is used by
the driver to access data such as the Part Board Assembly identifier.
The function uses simple logic to iterate over the PFA. First, the pointer
to the PFA in the NVM is read. Then the total length of the PFA is read
from the first word.
A pointer to the first TLV is initialized, and a simple loop iterates over
each TLV. The pointer is moved forward through the NVM until it exceeds the
PFA area.
The logic seems sound, but it is missing a key detail. The Preserved
Fields Area length includes one additional final word. This is documented
in the device data sheet as a dummy word which contains 0xFFFF. All NVMs
have this extra word.
If the driver tries to scan for a TLV that is not in the PFA, it will read
past the size of the PFA. It reads and interprets the last dummy word of
the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA
as a length.
The PFA resides within the Shadow RAM portion of the NVM, which is
relatively small. All of its offsets are within a 16-bit size. The PFA
pointer and TLV pointer are stored by the driver as 16-bit values.
In almost all cases, the word following the PFA will be such that
interpreting it as a length will result in 16-bit arithmetic overflow. Once
overflowed, the new next_tlv value is now below the maximum offset of the
PFA. Thus, the driver will continue to iterate the data as TLVs. In the
worst case, the driver hits on a sequence of reads which loop back to
reading the same offsets in an endless loop.
To fix this, we need to correct the loop iteration check to account for
this extra word at the end of the PFA. This alone is sufficient to resolve
the known cases of this issue in the field. However, it is plausible that
an NVM could be misconfigured or have corrupt data which results in the
same kind of overflow. Protect against this by using check_add_overflow
when calculating both the maximum offset of the TLVs, and when calculating
the next_tlv offset at the end of each loop iteration. This ensures that
the driver will not get stuck in an infinite loop when scanning the PFA.
Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 82617b9a04649e83ee8731918aeadbb6e6d7cbc7 ]
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05d6f442f31f901d27dbc64fd504a8ec7d5013de ]
A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.
How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
queue that AF_XDP is attached to.
Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).
Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b35b1c0b4e166a427395deaf61e3140495dfcb89 ]
This reverts commit 565736048bd5f9888990569993c6b6bfdf6dcb6d.
According to the commit, it implements a manual AN-37 for some
"troublesome" Juniper MX5 switches. This appears to be a workaround for a
particular switch.
It has been reported that this causes a severe breakage for other switches,
including a Cisco 3560CX-12PD-S.
The code appears to be a workaround for a specific switch which fails to
link in SFI mode. It expects to see AN-37 auto negotiation in order to
link. The Cisco switch is not expecting AN-37 auto negotiation. When the
device starts the manual AN-37, the Cisco switch decides that the port is
confused and stops attempting to link with it. This persists until a power
cycle. A simple driver unload and reload does not resolve the issue, even
if loading with a version of the driver which lacks this workaround.
The authors of the workaround commit have not responded with
clarifications, and the result of the workaround is complete failure to
connect with other switches.
This appears to be a case where the driver can either "correctly" link with
the Juniper MX5 switch, at the cost of bricking the link with the Cisco
switch, or it can behave properly for the Cisco switch, but fail to link
with the Junipir MX5 switch. I do not know enough about the standards
involved to clearly determine whether either switch is at fault or behaving
incorrectly. Nor do I know whether there exists some alternative fix which
corrects behavior with both switches.
Revert the workaround for the Juniper switch.
Fixes: 565736048bd5 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI")
Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/
Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Daly <jeffd@silicom-usa.com>
Cc: kernel.org-fo5k2w@ycharbi.fr
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 363f689600dd010703ce6391bcfc729a97d21840 upstream.
The ice_vc_fdir_param_check() function validates that the VSI ID of the
virtchnl flow director command matches the VSI number of the VF. This is
already checked by the call to ice_vc_isvalid_vsi_id() immediately
following this.
This check is unnecessary since ice_vc_isvalid_vsi_id() already confirms
this by checking that the VSI ID can locate the VSI associated with the VF
structure.
Furthermore, a following change is going to refactor the ice driver to
report VSI IDs using a relative index for each VF instead of reporting the
PF VSI number. This additional check would break that logic since it
enforces that the VSI ID matches the VSI number.
Since this check duplicates the logic in ice_vc_isvalid_vsi_id() and gets
in the way of refactoring that logic, remove it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a21605993dd5dfd15edfa7f06705ede17b519026 upstream.
The ice_vc_isvalid_q_id() function takes a VSI index and a queue ID. It
looks up the VSI from its index, and then validates that the queue number
is valid for that VSI.
The VSI ID passed is typically a VSI index from the VF. This VSI number is
validated by the PF to ensure that it matches the VSI associated with the
VF already.
In every flow where ice_vc_isvalid_q_id() is called, the PF driver already
has a pointer to the VSI associated with the VF. This pointer is obtained
using ice_get_vf_vsi(), rather than looking up the VSI using the index sent
by the VF.
Since we already know which VSI to operate on, we can modify
ice_vc_isvalid_q_id() to take a VSI pointer instead of a VSI index. Pass
the VSI we found from ice_get_vf_vsi() instead of re-doing the lookup. This
removes some unnecessary computation and scanning of the VSI list.
It also removes the last place where the driver directly used the VSI
number from the VF. This will pave the way for refactoring to communicate
relative VSI numbers to the VF instead of absolute numbers from the PF
space.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 387f295cb2150ed164905b648d76dfcbd3621778 upstream.
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay.
Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems")
Cc: stable@vger.kernel.org
Reported-by: Jérôme Carretero <cJ@zougloub.eu>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740
Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/
Co-developed-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 96fdd1f6b4ed72a741fb0eb705c0e13049b8721f ]
9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over
aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf().
The commit placed this lock acquisition just prior to the acquisition of
the VF configuration lock.
If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK
flag, this could deadlock with ice_vc_cfg_qs_msg() because it always
acquires the locks in the order of the VF configuration lock and then the
LAG mutex.
Lockdep reports this violation almost immediately on creating and then
removing 2 VF:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-rc6 #54 Tainted: G W O
------------------------------------------------------
kworker/60:3/6771 is trying to acquire lock:
ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice]
but task is already holding lock:
ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&pf->lag_mutex){+.+.}-{3:3}:
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_vc_cfg_qs_msg+0x45/0x690 [ice]
ice_vc_process_vf_msg+0x4f5/0x870 [ice]
__ice_clean_ctrlq+0x2b5/0x600 [ice]
ice_service_task+0x2c9/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
-> #0 (&vf->cfg_lock){+.+.}-{3:3}:
check_prev_add+0xe2/0xc50
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_reset_vf+0x22f/0x4d0 [ice]
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
*** DEADLOCK ***
4 locks held by kworker/60:3/6771:
#0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice]
#3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
stack backtrace:
CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54
Hardware name:
Workqueue: ice ice_service_task [ice]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x80
check_noncircular+0x12d/0x150
check_prev_add+0xe2/0xc50
? save_trace+0x59/0x230
? add_chain_cache+0x109/0x450
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
? lockdep_hardirqs_on+0x7d/0x100
lock_acquire+0xd4/0x2d0
? ice_reset_vf+0x22f/0x4d0 [ice]
? lock_is_held_type+0xc7/0x120
__mutex_lock+0x9b/0xbf0
? ice_reset_vf+0x22f/0x4d0 [ice]
? ice_reset_vf+0x22f/0x4d0 [ice]
? rcu_is_watching+0x11/0x50
? ice_reset_vf+0x22f/0x4d0 [ice]
ice_reset_vf+0x22f/0x4d0 [ice]
? process_one_work+0x176/0x4d0
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x104/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
To avoid deadlock, we must acquire the LAG mutex only after acquiring the
VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only
after we either acquire or check that the VF configuration lock is held.
Fixes: 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54976cf58d6168b8d15cebb395069f23b2f34b31 ]
Same number of TCs doesn't imply that underlying TC configs are
same. The config could be different due to difference in number
of queues in each TC. Add utility function to determine if TC
configs are same.
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef3c313119ea448c22da10366faa26b5b4b1a18e ]
If the MFS is set below the default (0x2600), a warning message is
reported like the following :
MFS for port 1 has been set below the default: 600
This message is a bit confusing as the number shown here (600) is in
fact an hexa number: 0x600 = 1536
Without any explicit "0x" prefix, this message is read like the MFS is
set to 600 bytes.
MFS, as per MTUs, are usually expressed in decimal base.
This commit reports both current and default MFS values in decimal
so it's less confusing for end-users.
A typical warning message looks like the following :
MFS for port 1 (1536) has been set below the default (9728)
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set")
Link: https://lore.kernel.org/r/20240423182723.740401-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2cc7d150550cc981aceedf008f5459193282425c ]
Issue reported by customer during SRIOV testing, call trace:
When both i40e and the i40iw driver are loaded, a warning
in check_flush_dependency is being triggered. This seems
to be because of the i40e driver workqueue is allocated with
the WQ_MEM_RECLAIM flag, and the i40iw one is not.
Similar error was encountered on ice too and it was fixed by
removing the flag. Do the same for i40e too.
[Feb 9 09:08] ------------[ cut here ]------------
[ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is
flushing !WQ_MEM_RECLAIM infiniband:0x0
[ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966
check_flush_dependency+0x10b/0x120
[ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq
snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4
nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr
rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma
intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif
isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal
intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core
iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore
ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich
intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad
xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe
drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel
libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror
dm_region_hash dm_log dm_mod fuse
[ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not
tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1
[ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS
SE5C620.86B.02.01.0013.121520200651 12/15/2020
[ +0.000001] Workqueue: i40e i40e_service_task [i40e]
[ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120
[ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48
81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd
ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90
[ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282
[ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX:
0000000000000027
[ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI:
ffff94d47f620bc0
[ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09:
00000000ffff7fff
[ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12:
ffff94c5451ea180
[ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15:
ffff94c5f1330ab0
[ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000)
knlGS:0000000000000000
[ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4:
00000000007706f0
[ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] ? __warn+0x80/0x130
[ +0.000003] ? check_flush_dependency+0x10b/0x120
[ +0.000002] ? report_bug+0x195/0x1a0
[ +0.000005] ? handle_bug+0x3c/0x70
[ +0.000003] ? exc_invalid_op+0x14/0x70
[ +0.000002] ? asm_exc_invalid_op+0x16/0x20
[ +0.000006] ? check_flush_dependency+0x10b/0x120
[ +0.000002] ? check_flush_dependency+0x10b/0x120
[ +0.000002] __flush_workqueue+0x126/0x3f0
[ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core]
[ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core]
[ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core]
[ +0.000020] i40iw_close+0x4b/0x90 [irdma]
[ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e]
[ +0.000035] i40e_service_task+0x126/0x190 [i40e]
[ +0.000024] process_one_work+0x174/0x340
[ +0.000003] worker_thread+0x27e/0x390
[ +0.000001] ? __pfx_worker_thread+0x10/0x10
[ +0.000002] kthread+0xdf/0x110
[ +0.000002] ? __pfx_kthread+0x10/0x10
[ +0.000002] ret_from_fork+0x2d/0x50
[ +0.000003] ? __pfx_kthread+0x10/0x10
[ +0.000001] ret_from_fork_asm+0x1b/0x30
[ +0.000004] </TASK>
[ +0.000001] ---[ end trace 0000000000000000 ]---
Fixes: 4d5957cbdecd ("i40e: remove WQ_UNBOUND and the task limit of our workqueue")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Robert Ganzynkowicz <robert.ganzynkowicz@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2cca35f5dd78b9f8297c879c5db5ab137c5d86c3 ]
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73278715725a8347032acf233082ca4eb31e6a56 ]
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
