summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe
AgeCommit message (Collapse)Author
2017-10-09ixgbe: incorrect XDP ring accounting in ethtool tx_frame paramJohn Fastabend
Changing the TX ring parameters with an XDP program attached may cause the XDP queues to be cleared and the TX rings to be incorrectly configured. Fix by doing correct ring accounting in setup call. Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flagDing Tianhong
The ixgbe driver use the compile check to determine if it can send TLPs to Root Port with the Relaxed Ordering Attribute set, this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to the kernel and we could check the bit4 in the PCIe Device Control register to determine whether we should use the Relaxed Ordering Attributes or not, so use this new way in the ixgbe driver. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09Revert commit 1a8b6d76dc5b ("net:add one common config...")Ding Tianhong
The new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to indicate that Relaxed Ordering Attributes (RO) should not be used for Transaction Layer Packets (TLP) targeted toward these affected Root Port, it will clear the bit4 in the PCIe Device Control register, so the PCIe device drivers could query PCIe configuration space to determine if it can send TLPs to Root Port with the Relaxed Ordering Attributes set. With this new flag we don't need the config ARCH_WANT_RELAX_ORDER to control the Relaxed Ordering Attributes for the ixgbe drivers just like the commit 1a8b6d76dc5b ("net:add one common config...") did, so revert this commit. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09ixgbe: fix masking of bits read from IXGBE_VXLANCTRL registerSabrina Dubroca
In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register and then try to mask some bits out of the value, using the logical instead of bitwise and operator. Fixes: a21d0822ff69 ("ixgbe: add support for geneve Rx offload") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09ixgbe: Return error when getting PHY address if PHY access is not supportedMark D Rustad
In cases where PHY register access is not supported, don't mislead a caller into thinking that it is supported by returning a PHY address. Instead, return -EOPNOTSUPP when PHY access is not supported. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-24ixgbe: use return codes from ndo_xdp_xmit that are distinguishableJesper Dangaard Brouer
For XDP_REDIRECT the use of return code -EINVAL is confusing, as it is used in three different cases. (1) When the index or ifindex lookup fails, and in the ixgbe driver (2) when link is down and (3) when XDP have not been enabled. The return code can be picked up by the tracepoint xdp:xdp_redirect for diagnosing why XDP_REDIRECT isn't working. Thus, there is a need different return codes to tell the issues apart. I'm considering using a specific err-code scheme for XDP_REDIRECT instead of using these errno codes. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18ixgbe: change ndo_xdp_xmit return code on xmit errorsJesper Dangaard Brouer
Use errno -ENOSPC ("No space left on device") when the XDP xmit have no space left on the TX ring buffer, instead of -ENOMEM. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net/sched: Fix the logic error to decide the ingress qdiscChris Mi
The offending commit used a newly added helper function. But the logic is wrong. Without this fix, the affected NICs can't do HW offload. Error -EOPNOTSUPP will be returned directly. Fixes: a2e8da9378cc ("net/sched: use newly added classid identity helpers") Signed-off-by: Chris Mi <chrism@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: sched: use newly added classid identity helpersJiri Pirko
Instead of checking handle, which does not have the inner class information and drivers wrongly assume clsact->egress as ingress, use the newly introduced classid identification helpers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: get rid of struct tc_to_netdevJiri Pirko
Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: push cls related args into cls_common structureJiri Pirko
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07ixgbe: push cls_u32 and mqprio setup_tc processing into separate functionsJiri Pirko
Let __ixgbe_setup_tc be a splitter for specific setup_tc types and push out cls_u32 and mqprio specific codes into separate functions. Also change the return values so they are the same as in the rest of the drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: make type an argument for ndo_setup_tcJiri Pirko
Since the type is always present, push it to be a separate argument to ndo_setup_tc. On the way, name the type enum and use it for arg type. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04net: sched: change names of action number helpers to be aligned with the restJiri Pirko
The rest of the helpers are named tcf_exts_*, so change the name of the action number helpers to be aligned. While at it, change to inline functions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25ixgbe: Disable flow control for XFITony Nguyen
Flow control autonegotiation is not supported for XFI. Make sure that ixgbe_device_supports_autoneg_fc() returns false and hw->fc.disable_fc_autoneg is set to true to avoid running the fc_autoneg function for that device. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-07-25ixgbe: Do not support flow control autonegotiation for X553Tony Nguyen
Flow control autonegotiation is not supported for fiber on X553. Add device ID checks in ixgbe_device_supports_autoneg_fc() to return the appropriate value. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-07-25ixgbe: Update NW_MNG_IF_SEL support for X553Tony Nguyen
The MAC register NW_MNG_IF_SEL fields have been redefined for X553. These changes impact the iXFI driver code flow. Since iXFI is only supported in X552, add MAC checks for iXFI flows. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-07-25ixgbe: Enable LASI interrupts for X552 devicesTony Nguyen
Enable LASI interrupts on X552 devices in order to receive notifications of link configurations of the external PHY and support the configuration of the internal iXFI link since iXFI does not support auto-negotiation. This is not required for X553 devices; add a check to avoid enabling LASI interrupts for X553 devices. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-07-25ixgbe: Ensure MAC filter was added before setting MACVLANTony Nguyen
This patch adds a check to ensure that adding the MAC filter was successful before setting the MACVLAN. If it was unsuccessful, propagate the error. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-07-17xdp: Add batching support to redirect mapJohn Fastabend
For performance reasons we want to avoid updating the tail pointer in the driver tx ring as much as possible. To accomplish this we add batching support to the redirect path in XDP. This adds another ndo op "xdp_flush" that is used to inform the driver that it should bump the tail pointer on the TX ring. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17xdp: add trace event for xdp redirectJohn Fastabend
This adds a trace event for xdp redirect which may help when debugging XDP programs that use redirect bpf commands. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17ixgbe: add initial support for xdp redirectJohn Fastabend
There are optimizations we can add after the basic feature is enabled. But, for now keep the patch simple. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17ixgbe: NULL xdp_tx rings on resource cleanupJohn Fastabend
tx_rings and rx_rings are cleaned up on close paths in ixgbe driver however, xdp_rings are not. Set the xdp_rings to NULL here so that we can use the pointer to indicate if the XDP rings are initialized. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16bpf: ixgbe: Report bpf_prog ID during XDP_QUERY_PROGMartin KaFai Lau
Add support to ixgbe to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13ixgbe: pci_set_drvdata must be called before register_netdevJeff Mahoney
We call pci_set_drvdata immediately after calling register_netdev, which leaves a window where tasks writing to the sriov_numvfs sysfs attribute can sneak in and crash the kernel. register_netdev cleans up after itself so placing pci_set_drvdata immediately before it should preserve the intent of commit 0fb6a55cc31f ("ixgbe: fix crash on rmmod after probe fail"). Fixes: 0fb6a55cc31f ("ixgbe: fix crash on rmmod after probe fail") Signed-off-by: Jeff Mahoney <jeffm@suse.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: Resolve cppcheck format string warningTony Nguyen
cppcheck warns that the format string is incorrect in the function ixgbe_get_strings(). Since the value cannot be negative, change the variable to unsigned which matches the format specifier. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: fix writes to PFQDEEmil Tantilov
ixgbe_write_qde() was ignoring the qde parameter which resulted in PFQDE.HIDE_VLAN not being set for X550. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: Bump version numberTony Nguyen
Update ixgbe version number. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: check for Tx timestamp timeouts during watchdogJacob Keller
The ixgbe driver has logic to handle only one Tx timestamp at a time, using a state bit lock to avoid multiple requests at once. It may be possible, if incredibly unlikely, that a Tx timestamp event is requested but never completes. Since we use an interrupt scheme to determine when the Tx timestamp occurred we would never clear the state bit in this case. Add an ixgbe_ptp_tx_hang() function similar to the already existing ixgbe_ptp_rx_hang() function. This function runs in the watchdog routine and makes sure we eventually recover from this case instead of permanently disabling Tx timestamps. Note: there is no currently known way to cause this without hacking the driver code to force it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: add statistic indicating number of skipped Tx timestampsJacob Keller
The ixgbe driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: avoid permanent lock of *_PTP_TX_IN_PROGRESSJacob Keller
The ixgbe driver uses a state bit lock to avoid handling more than one Tx timestamp request at once. This is required because hardware is limited to a single set of registers for Tx timestamps. The state bit lock is not properly cleaned up during ixgbe_xmit_frame_ring() if the transmit fails such as due to DMA or TSO failure. In some hardware this results in blocking timestamps until the service task times out. In other hardware this results in a permanent lock of the timestamp bit because we never receive an interrupt indicating the timestamp occurred, since indeed the packet was never transmitted. Fix this by checking for DMA and TSO errors in ixgbe_xmit_frame_ring() and properly cleaning up after ourselves when these occur. Reported-by: Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: fix race condition with PTP_TX_IN_PROGRESS bitsJacob Keller
Hardware related to the ixgbe driver is limited to handling a single Tx timestamp request at a time. Thus, the driver ignores requests for Tx timestamp while waiting for the current request to finish. It uses a state bit lock which enforces that only one timestamp request is honored at a time. Unfortunately this suffers from a simple race condition. The bit lock is not cleared until after skb_tstamp_tx() is called notifying applications of a new Tx timestamp. Even a well behaved application sending only one packet at a time and waiting for a response can wake up and send a new packet before the bit lock is cleared. This results in needlessly dropping some Tx timestamp requests. We can fix this by unlocking the state bit as soon as we read the Timestamp register, as this is the first point at which it is safe to unlock. To avoid issues with the skb pointer, we'll use a copy of the pointer and set the global variable in the driver structure to NULL first. This ensures that the next timestamp request does not modify our local copy of the skb pointer. This ensures that well behaved applications do not accidentally race with the unlock bit. Obviously an application which sends multiple Tx timestamp requests at once will still only timestamp one packet at a time. Unfortunately there is nothing we can do about this. Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-08net: propagate tc filter chain index down the ndo_setup_tc callJiri Pirko
We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31ixgbe: fix incorrect status checkEmil Tantilov
Check for ret_val instead of !ret_val to allow the rest of the code to execute and configure the speed properly. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: add missing configuration for rate select 1Emil Tantilov
Add RS1 configuration to ixgbe_set_soft_rate_select_speed() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: always call setup_mac_link for multispeed fiberEmil Tantilov
Remove the logic which would previously skip the link configuration in the case where we are already at the requested speed in ixgbe_setup_mac_link_multispeed_fiber(). By exiting early we are skipping the link configuration and as such the driver may not always configure the PHY correctly for SFP+. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: add write flush when configuring CS4223/7Emil Tantilov
Make sure the writes are processed immediately. Without the flush it is possible for operations on one port to spill over the other as the resource is shared. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: correct CS4223/7 PHY identificationEmil Tantilov
Previous method was unreliable. Use a different register to differentiate between the SKUs. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Resolve warnings for -Wimplicit-fallthroughTony Nguyen
This patch adds/changes fall through comments to address new warnings produced by gcc 7. Fixed formatting on a couple of comments in the function. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Resolve truncation warning for q_vector->nameTony Nguyen
The following warning is now shown as a result of new checks added for gcc 7: drivers/net/ethernet/intel/ixgbe/ixgbe_main.c: In function ‘ixgbe_open’: drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3118:13: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 3 and 18 [-Wformat-truncation=] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3118:6: note: directive argument in the range [0, 2147483647] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~~~~~~~~~ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3117:4: note: ‘snprintf’ output between 8 and 32 bytes into a destination of size 24 snprintf(q_vector->name, sizeof(q_vector->name) - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-%s-%d", netdev->name, "TxRx", ri++); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Resolve this warning by making a couple of changes. - Don't reserve space for the null terminator. Since snprintf adds the null terminator automatically, there is no need for us to reserve a byte for it. - Change a couple variables that can never be negative from int to unsigned int. While we're making changes to the format string, move the constant strings into the format string instead of providing them as specifiers. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Add error checking to setting VF MACTony Nguyen
Currently, when setting a VF MAC address there are no error checks to ensure that the MAC filter was successfully added. This patch adds additional error checks, reporting, and propagation of errors. It also will not set the MAC address unless adding the MAC filter was successful. With these changes, setting the mac address to zeros can no longer call ixgbe_set_vf_mac() as adding a zero MAC address filter is not valid. Instead directly delete the filter and, if successful, clear the MAC address. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Correct thermal sensor event checkMark Rustad
The thermal sensor event logic is messed up, because it can execute the code when there is no thermal event. The current logic is that it will exit when !capable && !event whereas it really should exit when !capable || !event. For one thing, it means that the service task is doing too much work. It probably has some other symptoms as well. So, correct the logic, simplifying to only execute when there is a thermal event. The capable check is redundant. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: enable L3/L4 filtering for Tx switched packetsEmil Tantilov
This will ensure that VF-to-VF traffic on the same PF is filtered to allow RSS operation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Remove MAC X550EM_X 1Gbase-t led_[on|off] supportPaul Greenwalt
Since FW configures the PHY and MAC X550EM_X has no PHY access, led_[on|off] is not supported with the 1Gbase-t design. Removed MAC X550EM_X 1Gbase-t led_[on|off] support by setting function pointers to NULL and added NULL pointer checks. Also set init_led_link_act to NULL and added NULL pointer check. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: initialize u64_stats_sync structures early at ixgbe_probeLiwei Song
Fix the following CallTrace: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 71 PID: 1 Comm: swapper/0 Not tainted 4.8.8-WR9.0.0.1_standard #11 Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014 00200086 00200086 eb5e1ab8 c144dd70 00000000 00000000 eb5e1af8 c10af89a c1d23de4 eb5e1af8 00000009 eb5d8600 eb5d8638 eb5e1af8 c10b14d8 00000009 0000000a c1d32911 00000000 00000000 e44c826c eb5d8000 eb5e1b74 c10b214e Call Trace: [<c144dd70>] dump_stack+0x5f/0x8f [<c10af89a>] register_lock_class+0x25a/0x4c0 [<c10b14d8>] ? check_irq_usage+0x88/0xc0 [<c10b214e>] __lock_acquire+0x5e/0x17a0 [<c1abdb9b>] ? _raw_spin_unlock_irqrestore+0x3b/0x70 [<c10cf14a>] ? rcu_read_lock_sched_held+0x8a/0x90 [<c10b3c5f>] lock_acquire+0x9f/0x1f0 [<c1922dcf>] ? dev_get_stats+0x5f/0x110 [<c176e6b3>] ixgbe_get_stats64+0x113/0x320 [<c1922dcf>] ? dev_get_stats+0x5f/0x110 [<c1922dcf>] dev_get_stats+0x5f/0x110 [<c1ab5415>] rtnl_fill_stats+0x40/0x105 [<c193dd45>] rtnl_fill_ifinfo+0x4c5/0xd20 [<c11c5115>] ? __kmalloc_node_track_caller+0x1a5/0x410 [<c1917487>] ? __kmalloc_reserve.isra.42+0x27/0x80 [<c191754f>] ? __alloc_skb+0x6f/0x270 [<c1942291>] rtmsg_ifinfo_build_skb+0x71/0xd0 [<c194230a>] rtmsg_ifinfo.part.23+0x1a/0x50 [<c1923dad>] ? call_netdevice_notifiers_info+0x2d/0x60 [<c194236b>] rtmsg_ifinfo+0x2b/0x40 [<c192f997>] register_netdevice+0x3d7/0x4d0 [<c192faa7>] register_netdev+0x17/0x30 [<c177b83d>] ixgbe_probe+0x118d/0x1610 [<c1498202>] local_pci_probe+0x32/0x80 [<c1498172>] ? pci_match_device+0xd2/0x100 [<c14991e0>] pci_device_probe+0xc0/0x110 [<c1652cc5>] driver_probe_device+0x1c5/0x280 [<c1498172>] ? pci_match_device+0xd2/0x100 [<c1652e09>] __driver_attach+0x89/0x90 [<c1652d80>] ? driver_probe_device+0x280/0x280 [<c165114f>] bus_for_each_dev+0x4f/0x80 [<c165269e>] driver_attach+0x1e/0x20 [<c1652d80>] ? driver_probe_device+0x280/0x280 [<c1652317>] bus_add_driver+0x1a7/0x220 [<c1653a79>] driver_register+0x59/0xe0 [<c1f897b8>] ? igb_init_module+0x49/0x49 [<c1497b2a>] __pci_register_driver+0x4a/0x50 [<c1f8985d>] ixgbe_init_module+0xa5/0xc4 [<c1000485>] do_one_initcall+0x35/0x150 [<c107e818>] ? parameq+0x18/0x70 [<c1f395d8>] ? repair_env_string+0x12/0x51 [<c107ead0>] ? parse_args+0x260/0x3b0 [<c1074f73>] ? __usermodehelper_set_disable_depth+0x43/0x50 [<c1f39e90>] kernel_init_freeable+0x19b/0x267 [<c1f395c6>] ? set_debug_rodata+0xf/0xf [<c10b1e7b>] ? trace_hardirqs_on+0xb/0x10 [<c1abdc02>] ? _raw_spin_unlock_irq+0x32/0x50 [<c1085f0b>] ? finish_task_switch+0xab/0x1f0 [<c1085ec9>] ? finish_task_switch+0x69/0x1f0 [<c1ab6a30>] kernel_init+0x10/0x110 [<c108bd65>] ? schedule_tail+0x25/0x80 [<c1abe422>] ret_from_kernel_thread+0xe/0x24 [<c1ab6a20>] ? rest_init+0x130/0x130 This CallTrace occurred on 32-bit kernel with CONFIG_PROVE_LOCKING enabled. This happens at ixgbe driver probe hardware stage, when comes to ixgbe_get_stats64, the seqcount/seqlock still not initialize, although this was initialize in TX/RX resources setup routin, but it was too late, then lockdep give this Warning. To fix this, move the u64_stats_init function to driver probe stage, which before we get the status of seqcount and after the RX/TX ring was finished init. Signed-off-by: Liwei Song <liwei.song@windriver.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2017-05-31ixgbe/ixgbevf: Enables TSO for MPLS encapsulated packetsScott Peterson
This patch advertises TSO & GSO features in netdev->mpls_features. In ixgbe(vf)_tso() where we set up segmentation offload, the IP header will be the inner network header when eth_p_mpls() indicates the Ethernet protocol is MPLS (UC or MC). Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Scott Peterson <scott.d.peterson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-21net: ethernet: update drivers to handle HWTSTAMP_FILTER_NTP_ALLMiroslav Lichvar
Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid filter and update drivers which can timestamp all packets, or which explicitly list unsupported filters instead of using a default case, to handle the filter. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-04-29ixgbe: Check for RSS key before setting valueTony Nguyen
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 18:03:09 +0000