summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
AgeCommit message (Collapse)Author
2014-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/chelsio/cxgb4vf/sge.c drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c sge.c was overlapping two changes, one to use the new __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net. ixgbe_phy.c was a set of overlapping whitespace changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnxDaniel Borkmann
Status variable is never initialized, can carry an arbitrary value on the stack and thus may let the function fail. Fixes: e90dd2645664 ("ixgbe: Make return values more direct") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11ixgbe: Add new support for X550 MAC'sDon Skidmore
This patch will add in the new MAC defines and fit it into the switch cases throughout the driver. New functionality and enablement support will be added in following patches. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02ixgbe: remove wait loop on autoneg for copper devicesEmil Tantilov
This patch removes couple of wait loops on autoneg that are not needed. During validation we noticed that the loops always time out, so there should be no user impact. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Make return values more directMark Rustad
Make return values more direct, eliminating some gotos and otherwise unneeded conditionals. This also eliminates some local variables. Also a few minor cleanups in affected code so checkpatch won't complain. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-18e1000e/igb/ixgbe/i40e: fix message terminationsJakub Kicinski
Add \n at the end of messages where missing, remove all \r. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-31ixgbe: fix ixgbe_check_reset_blocked() declarationJean Sacren
The commit c97506ab0e22 ("ixgbe: Add check for FW veto bit") introduced the new function ixgbe_check_reset_blocked() with a minor issue in declaration. Fix the declaration by changing the type specifier to bool as the definition returns a boolean value. Additionally all ixgbe_check_reset_blocked() callers are expected to return a boolean value. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: add Linux NICS mailing list to contact infoJacob Keller
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-02-28ixgbe: Add check for FW veto bitDon Skidmore
The driver will now honor the MNG FW veto bit in blocking link resets. This patch will affect x520 and x540 systems. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Check for adapter removal on register writesMark Rustad
Prevent writes to an adapter that has been detected as removed by a previous failing read. This also fixes some include file ordering confusion that this patch revealed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-30ixgbe: Make ixgbe_identify_qsfp_module_generic staticMark Rustad
Correct a namespace complaint by making the function static and moving the prototype into the .c file. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: add support for older QSFP active DA cablesEmil Tantilov
This patch adds support for QSFP active direct attach (DA) cables which pre-date SFF-8436 v3.6. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: add 1Gbps support for QSFP+Emil Tantilov
This patch adds GB speed support for QSFP+ modules. Autonegotiation is not supported with QSFP+. The user will have to set the desired speed on both link partners using ethtool advertise setting. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: cleanup some log messagesDon Skidmore
Some minor log messages cleanup, changing the level one message is logged, adding a bit of detail to another and put all the text on one line. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: Check return value on eeprom readsMark Rustad
This patch fixes the possible use of uninitialized memory by checking the return value on eeprom reads. These issues were identified by static analysis. In many cases error messages will be produced so that corrupted eeprom issues will be more visible. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-31ixgbe: add support for quad-port x520 adapterDon Skidmore
This is a x520 based quad-port (4x10Gbps) NIC with a single QSFP+ connector. Changes were required to our identify functions due to different eeprom address which is also included here. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-30ixgbe: fix semaphore lock for I2C read/writes on 82598Emil Tantilov
ixgbe_read/write_i2c_phy_82598() does not hold the SWFW_SYNC semaphore for the entire function. Instead the lock is held only during the phy.ops.read/write_reg operations. As result when the function is being called simultaneously the I2C read/writes can be corrupted. The following patch introduces the SWFW_SYNC semaphore for the entire ixgbe_read/write_i2c_phy_82598() function. To accomplish this I had to create 2 separate functions: ixgbe_read_phy_reg_mdi() ixgbe_write_phy_reg_mdi() Those functions are identical to ixgbe_read/write_phy_reg_generic() sans the locking, and can be used in ixgbe_read/write_i2c_phy_82598() with the SWFW_SYNC semaphore being held. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24ixgbe: add SFP+ LX module supportDon Skidmore
This patch adds LX support to 82599 devices. This is an alternate patch to the one suggested by Stefan Behte <s.behte@babiel.com> In addition this patch includes some cleanups such as: - removed parenthesis around "x == y ||" lines inside an if statement for consistency. - grouped the sx/lx sfp types along with srlr in ixgbe_get_settings() since they all have the same supported, advertised and port values. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reported-by: Stefan Behte <s.behte@babiel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: cleanup error checking in ixgbe_identify_sfp_module_generic()Emil Tantilov
This patch replaces instances where a return code from i2c operations were checked against a list of error codes with a much simpler if ( status != 0 ) check. Some whitespace cleanups included. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: fix possible data corruption in read_i2c_byteEmil Tantilov
This patch makes sure that the SW lock is released after all i2c operations complete in the retry code path. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: update date to 2013Don Skidmore
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: allow reading of SFF-8472 data over i2cEmil Tantilov
This patch adds functions needed for reading SFF-8472 diagnostic data from SFP modules. Based on original patch from Aurélien Guillaume <footplus@gmail.com> CC: Aurélien Guillaume <footplus@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-31ixgbe: removed unused variable from setup_link_speedJosh Hay
Removes the autoneg parameter from the setup_link_speed functions. These functions do nothing with this parameter. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20ixgbe: add support for 1G SX modulesJacob Keller
This patch adds support for 1G Fiber PHY modules (SFP+ modules). This support comes along side support for 1G Copper PHY modules, but uses a different PHY type (ixgbe_sfp_type_1g_sx_core). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-14ixgbe: add I2C clock stretchingDon Skidmore
This patch adds support for I2C clock stretching which is required per SFF-8636. Customers with passive DA cables implement clock stretching would fail without this patch. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-02-03ixgbe: update copyright to 2012Don Skidmore
New year so bump the copyright date. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-01ixgbe: Add module parameter to allow untested and unsafe SFP+ modulesPeter P Waskiewicz Jr
The X520 family of network devices, with the 82599 chip, support a small number of Intel-verified SFP+ modules on their NICs. To maintain stability and quality, the current devices restrict untested 3rd party SFP+ modules. This patch introduces a module parameter for ixgbe to allow these untested modules at the user's peril. It also includes a warning to the syslog alerting users that the modules aren't supported, and results may vary. CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-02ixgbe: add write flush in ixgbe_clock_out_i2c_byte()Emil Tantilov
I2C access is timing critical. Always do a write flush after writing to the I2CCTL register. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-19net: fix assignment of 0/1 to bool variables.Rusty Russell
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-05ixgbe: remove return code for functions that always return 0Emil Tantilov
Since ixgbe_raise_i2c_clk() can never return anything else than 0 this patch removes it's return value and all checks for it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-05ixgbe: clear the data field in ixgbe_read_i2c_byte_genericEmil Tantilov
Clear the data field in ixgbe_read_i2c_byte_generic so it does not accumulate 1 bit using the same variable multiple times. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-10intel: Move the Intel wired LAN driversJeff Kirsher
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 20:34:59 +0000