summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc/igc.h
AgeCommit message (Collapse)Author
2020-01-06igc: Add support for RX timestampingVinicius Costa Gomes
This adds support for timestamping received packets. It is based on the i210, as many features of i225 work the same way. The main difference from i210 is that i225 has support for choosing the timer register to use when timestamping packets. Right now, we only support using timer 0. The other difference is that i225 stores two timestamps in the receive descriptor, right now, we only retrieve one. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add basic skeleton for PTPVinicius Costa Gomes
This allows the creation of the /dev/ptpX device for i225, and reading and writing the time. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add legacy power management supportSasha Neftin
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by: kbuild test robot <lpk@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21igc: Clean up unused shadow_vfta pointerSasha Neftin
VLAN filter table array not implemented yet and shadow_vfta pointer not used. Clean up the code and remove the unused shadow_vfta pointer. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-09igc: Add tx_csum offload functionalitySasha Neftin
Add IP generic TX checksum offload functionality. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add support for statisticsSasha Neftin
Add support for statistics and show basic counters. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Extend the ethtool supportingSasha Neftin
Add show and configure network flow classification (NFC) methods to the ethtool. Show the specifies Rx ntuple filters. Configures receive network flow classification option or rules. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add multiple receive queues control supportingSasha Neftin
Enable the multi queues to receive. Program the direction of packets to specified queues according to the mode selected in the MRQC register. Multiple receive queues defined by filters and RSS for 4 queues. Enable/disable RSS hashing and also to enable multiple receive queues. This patch will allow further ethtool support development. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Add ethtool supportSasha Neftin
This patch adds basic ethtool support to the device to allow for configuration. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-21igc: Remove obsolete IGC_ERR defineSasha Neftin
Address community comment. Remove obsolete IGC_ERR define and use dev_err method. Suggested by Joe Perches. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07igc: Clean up codeSasha Neftin
Address few community comments. Remove unused code, will be added per demand. Remove blank lines and unneeded includes. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add watchdogSasha Neftin
Code completion, remove obsolete code Add watchdog methods Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add setup link functionalitySasha Neftin
Add link establishment methods Add auto negotiation methods Add read MAC address method Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add code for PHY supportSasha Neftin
Add PHY's ID support Add support for initialization, acquire and release of PHY Enable register access Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add NVM supportSasha Neftin
Add code for NVM support and get MAC address, complete probe method. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add transmit and receive fastpath and interrupt handlersSasha Neftin
This patch adds support for allocating, configuring, and freeing Tx/Rx ring resources. With these changes in place the descriptor queues are in a state where they are ready to transmit or receive if provided buffers. This also adds the transmit and receive fastpath and interrupt handlers. With this code in place the network device is now able to send and receive frames over the network interface using a single queue. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add support for Tx/Rx ringsSasha Neftin
This change adds the defines and structures necessary to support both Tx and Rx descriptor rings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add interrupt supportSasha Neftin
This patch set adds interrupt support for the igc interfaces. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add netdevSasha Neftin
Now that we have the ability to configure the basic settings on the device we can start allocating and configuring a netdev for the interface. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add support for PFSasha Neftin
This patch adds the basic defines and structures needed by the PF for operation. With this it is possible to bring up the interface, but without being able to configure any of the filters on the interface itself. Add skeleton for a function pointers. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller supportSasha Neftin
This patch adds the beginning framework onto which I am going to add the igc driver which supports the Intel(R) I225-LM/I225-V 2.5G Ethernet Controller. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>