| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit ed375b182140eeb9c73609b17939c8a29b27489e ]
Before the referenced commit, the shutdown just called idpf_remove(),
this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task
rescheduling reset. Without this flag set the shutdown process is
vulnerable to HW reset or any other triggering conditions (such as
default mailbox being destroyed).
When one of conditions checked in idpf_service_task becomes true,
vc_event_task can be rescheduled during shutdown, this leads to accessing
freed memory e.g. idpf_req_rel_vector_indexes() trying to read
vport->q_vector_idxs. This in turn causes the system to become defunct
during e.g. systemctl kexec.
Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown
process, instead just cancel the serv_task before cancelling
adapter->serv_task before cancelling adapter->vc_event_task to ensure that
reset will not be scheduled while we are doing a shutdown.
Fixes: 4c9106f4906a ("idpf: fix adapter NULL pointer dereference on reboot")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a558cbda51bef09773c72bf74a32047479110c7 ]
In case of failing on rss_data->rss_key allocation the function is
freeing vport without freeing earlier allocated q_vector_idxs. Fix it.
Move from freeing in error branch to goto scheme.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Suggested-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 713dd6c2deca88cba0596b1e2576f7b7a8e5c59e ]
Split offloads into csum, tso and other offloads so that tunneled
packets do not by default have all the offloads enabled.
Stateless offloads for encapsulated packets are not yet supported in
firmware/software but in the driver we were setting the features same as
non encapsulated features.
Fixed naming to clarify CSUM bits are being checked for Tx.
Inherit netdev features to VLAN interfaces as well.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Zachary Goldstein <zachmgoldstein@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250425222636.3188441-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 49717ef01ce1b6dbe4cd12bee0fc25e086c555df upstream.
The sizeof(struct napi_struct) can change. Don't hardcode the size to
400 bytes and instead use "sizeof(struct napi_struct)".
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241004105407.73585-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Yifei: In Linux-6.12.y, it still hard code the size of napi_struct,
adding a member will lead the entire build failed]
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4c9106f4906a85f6b13542d862e423bcdc118cc3 ]
With SRIOV enabled, idpf ends up calling into idpf_remove() twice.
First via idpf_shutdown() and then again when idpf_remove() calls into
sriov_disable(), because the VF devices use the idpf driver, hence the
same remove routine. When that happens, it is possible for the adapter
to be NULL from the first call to idpf_remove(), leading to a NULL
pointer dereference.
echo 1 > /sys/class/net/<netif>/device/sriov_numvfs
reboot
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:idpf_remove+0x22/0x1f0 [idpf]
...
? idpf_remove+0x22/0x1f0 [idpf]
? idpf_remove+0x1e4/0x1f0 [idpf]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19f/0x200
pci_stop_bus_device+0x6d/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pci_iov_remove_virtfn+0xbe/0x120
sriov_disable+0x34/0xe0
idpf_sriov_configure+0x58/0x140 [idpf]
idpf_remove+0x1b9/0x1f0 [idpf]
idpf_shutdown+0x12/0x30 [idpf]
pci_device_shutdown+0x35/0x60
device_shutdown+0x156/0x200
...
Replace the direct idpf_remove() call in idpf_shutdown() with
idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform
the bulk of the cleanup, such as stopping the init task, freeing IRQs,
destroying the vports and freeing the mailbox. This avoids the calls to
sriov_disable() in addition to a small netdev cleanup, and destroying
workqueues, which don't seem to be required on shutdown.
Reported-by: Yuying Ma <yuma@redhat.com>
Fixes: e850efed5e15 ("idpf: add module register and probe functionality")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 674fcb4f4a7e3e277417a01788cc6daae47c3804 ]
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header
is not set yet.
This triggers the following warning for CONFIG_DEBUG_NET=y builds.
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb))
[ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth
[ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697
[ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748)
[ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261687] ? report_bug (lib/bug.c:?)
[ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285)
[ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309)
[ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf
[ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf
[ 69.261712] __napi_poll (net/core/dev.c:7194)
[ 69.261716] net_rx_action (net/core/dev.c:7265)
[ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293)
[ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288)
[ 69.261726] handle_softirqs (kernel/softirq.c:561)
Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52c11d31b5a1d1c747bb5f36cc4808e93e2348f4 ]
On initial driver load, alloc_etherdev_mqs is called with whatever max
queue values are provided by the control plane. However, if the driver
is loaded on a system where num_online_cpus() returns less than the max
queues, the netdev will think there are more queues than are actually
available. Only num_online_cpus() will be allocated, but
skb_get_queue_mapping(skb) could possibly return an index beyond the
range of allocated queues. Consequently, the packet is silently dropped
and it appears as if TX is broken.
Set the real number of queues during open so the netdev knows how many
queues will be allocated.
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ff66c2f9ea4e9311e9a00004348b6c465bd5d3b ]
Move the call to skb_record_rx_queue in idpf_rx_process_skb_fields()
so that RX queue is recorded for RSC packets too.
Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69ab25a74e2df53edc2de4acfce0a484bdb88155 ]
Handle rsc packet with a single segment same as a multi
segment rsc packet so that CHECKSUM_PARTIAL is set in the
skb->ip_summed field. The current code is passing CHECKSUM_NONE
resulting in TCP GRO layer doing checksum in SW and hiding the
issue. This will fail when using dmabufs as payload buffers as
skb frag would be unreadable.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a5b021cb8186f1854bac2812bd4f396bb1e881c ]
When a workqueue is created with `WQ_UNBOUND`, its work items are
served by special worker-pools, whose host workers are not bound to
any specific CPU. In the default configuration (i.e. when
`queue_delayed_work` and friends do not specify which CPU to run the
work item on), `WQ_UNBOUND` allows the work item to be executed on any
CPU in the same node of the CPU it was enqueued on. While this
solution potentially sacrifices locality, it avoids contention with
other processes that might dominate the CPU time of the processor the
work item was scheduled on.
This is not just a theoretical problem: in a particular scenario
misconfigured process was hogging most of the time from CPU0, leaving
less than 0.5% of its CPU time to the kworker. The IDPF workqueues
that were using the kworker on CPU0 suffered large completion delays
as a result, causing performance degradation, timeouts and eventual
system crash.
Tested:
* I have also run a manual test to gauge the performance
improvement. The test consists of an antagonist process
(`./stress --cpu 2`) consuming as much of CPU 0 as possible. This
process is run under `taskset 01` to bind it to CPU0, and its
priority is changed with `chrt -pQ 9900 10000 ${pid}` and
`renice -n -20 ${pid}` after start.
Then, the IDPF driver is forced to prefer CPU0 by editing all calls
to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0.
Finally, `ktraces` for the workqueue events are collected.
Without the current patch, the antagonist process can force
arbitrary delays between `workqueue_queue_work` and
`workqueue_execute_start`, that in my tests were as high as
`30ms`. With the current patch applied, the workqueue can be
migrated to another unloaded CPU in the same node, and, keeping
everything else equal, the maximum delay I could see was `6us`.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d15fe4edd7decdf14d8ad2b78df100ea23302065 ]
The transaction salt was being accessed before acquiring the
idpf_vc_xn_lock when idpf has to forward the virtchnl reply.
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 137da75ba72593598898a4e79da34f4b2da5d151 ]
Restore the call to idpf_vc_xn_shutdown() at the beginning of
idpf_vc_core_deinit() provided the function is not called on remove.
In the reset path the mailbox is destroyed, leading to all transactions
timing out.
Fixes: 09d0fb5cb30e ("idpf: deinit virtchnl transaction manager after vport and vectors")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 396f0165672c6a74d7379027d344b83b5f05948c ]
Add read memory barrier to ensure the order of operations when accessing
control queue descriptors. Specifically, we want to avoid cases where loads
can be reordered:
1. Load #1 is dispatched to read descriptor flags.
2. Load #2 is dispatched to read some other field from the descriptor.
3. Load #2 completes, accessing memory/cache at a point in time when the DD
flag is zero.
4. NIC DMA overwrites the descriptor, now the DD flag is one.
5. Any fields loaded before step 4 are now inconsistent with the actual
descriptor state.
Add read memory barrier between steps 1 and 2, so that load #2 is not
executed until load #1 has completed.
Fixes: 8077c727561a ("idpf: add controlq init and reset checks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Suggested-by: Lance Richardson <rlance@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c69c77aafe74cf755af55070584b643e5c4e4d8 ]
Commit d9028db618a6 ("idpf: convert to libeth Tx buffer completion")
inadvertently removed code that was necessary for the tx buffer cleaning
routine to iterate over all buffers associated with a packet.
When a frag is too large for a single data descriptor, it will be split
across multiple data descriptors. This means the frag will span multiple
buffers in the buffer ring in order to keep the descriptor and buffer
ring indexes aligned. The buffer entries in the ring are technically
empty and no cleaning actions need to be performed. These empty buffers
can precede other frags associated with the same packet. I.e. a single
packet on the buffer ring can look like:
buf[0]=skb0.frag0
buf[1]=skb0.frag1
buf[2]=empty
buf[3]=skb0.frag2
The cleaning routine iterates through these buffers based on a matching
completion tag. If the completion tag is not set for buf2, the loop will
end prematurely. Frag2 will be left uncleaned and next_to_clean will be
left pointing to the end of packet, which will break the cleaning logic
for subsequent cleans. This consequently leads to tx timeouts.
Assign the empty bufs the same completion tag for the packet to ensure
the cleaning routine iterates over all of the buffers associated with
the packet.
Fixes: d9028db618a6 ("idpf: convert to libeth Tx buffer completion")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu chittim <madhu.chittim@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
In an event where the platform running the device control plane
is rebooted, reset is detected on the driver. It releases
all the resources and waits for the reset to complete. Once the
reset is done, it tries to build the resources back. At this
time if the device control plane is not yet started, then
the driver timeouts on the virtchnl message and retries to
establish the mailbox again.
In the retry flow, mailbox is deinitialized but the mailbox
workqueue is still alive and polling for the mailbox message.
This results in accessing the released control queue leading to
null-ptr-deref. Fix it by unrolling the work queue cancellation
and mailbox deinitialization in the reverse order which they got
initialized.
Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request")
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org # 6.9+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.
To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Cc: stable@vger.kernel.org # 6.7+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the device is removed, idpf is supposed to make certain virtchnl
requests e.g. VIRTCHNL2_OP_DEALLOC_VECTORS and VIRTCHNL2_OP_DESTROY_VPORT.
However, this does not happen due to the referenced commit introducing
virtchnl transaction manager and placing its deinitialization before those
messages are sent. Then the sending is impossible due to no transactions
being available.
Lack of cleanup can lead to the FW becoming unresponsive from e.g.
unloading-loading the driver and creating-destroying VFs afterwards.
Move transaction manager deinitialization to after other virtchnl-related
cleanup is done.
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a mailbox message is received, the driver is checking for a non 0
datalen in the controlq descriptor. If it is valid, the payload is
attached to the ctlq message to give to the upper layer. However, the
payload response size given to the upper layer was taken from the buffer
metadata which is _always_ the max buffer size. This meant the API was
returning 4K as the payload size for all messages. This went unnoticed
since the virtchnl exchange response logic was checking for a response
size less than 0 (error), not less than exact size, or not greater than
or equal to the max mailbox buffer size (4K). All of these checks will
pass in the success case since the size provided is always 4K. However,
this breaks anyone that wants to validate the exact response size.
Fetch the actual payload length from the value provided in the
descriptor data_len field (instead of the buffer metadata).
Unfortunately, this means we lose some extra error parsing for variable
sized virtchnl responses such as create vport and get ptypes. However,
the original checks weren't really helping anyways since the size was
_always_ 4K.
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The VF's dynamic interrupt ctl "dyn_ctl_intrvl_s" is not initialized
in idpf_vf_intr_reg_init(). This resulted in the following UBSAN error
whenever a VF is created:
[ 564.345655] UBSAN: shift-out-of-bounds in drivers/net/ethernet/intel/idpf/idpf_txrx.c:3654:10
[ 564.345663] shift exponent 4294967295 is too large for 32-bit type 'int'
[ 564.345671] CPU: 33 UID: 0 PID: 2458 Comm: NetworkManager Not tainted 6.11.0-rc4+ #1
[ 564.345678] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C6200.86B.0027.P10.2201070222 01/07/2022
[ 564.345683] Call Trace:
[ 564.345688] <TASK>
[ 564.345693] dump_stack_lvl+0x91/0xb0
[ 564.345708] __ubsan_handle_shift_out_of_bounds+0x16b/0x320
[ 564.345730] idpf_vport_intr_update_itr_ena_irq.cold+0x13/0x39 [idpf]
[ 564.345755] ? __pfx_idpf_vport_intr_update_itr_ena_irq+0x10/0x10 [idpf]
[ 564.345771] ? static_obj+0x95/0xd0
[ 564.345782] ? lockdep_init_map_type+0x1a5/0x800
[ 564.345794] idpf_vport_intr_ena+0x5ef/0x9f0 [idpf]
[ 564.345814] idpf_vport_open+0x2cc/0x1240 [idpf]
[ 564.345837] idpf_open+0x6d/0xc0 [idpf]
[ 564.345850] __dev_open+0x241/0x420
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Tell hardware to write back completed descriptors even when interrupts
are disabled. Otherwise, descriptors might not be written back until
the hardware can flush a full cacheline of descriptors. This can cause
unnecessary delays when traffic is light (or even trigger Tx queue
timeout).
The example scenario to reproduce the Tx timeout if the fix is not
applied:
- configure at least 2 Tx queues to be assigned to the same q_vector,
- generate a huge Tx traffic on the first Tx queue
- try to send a few packets using the second Tx queue.
In such a case Tx timeout will appear on the second Tx queue because no
completion descriptors are written back for that queue while interrupts
are disabled due to NAPI polling.
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Fixes: a5ab9ee0df0b ("idpf: add singleq start_xmit and napi poll")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
netif_txq_maybe_stop() returns -1, 0, or 1, while
idpf_tx_maybe_stop_common() says it returns 0 or -EBUSY. As a result,
there sometimes are Tx queue timeout warnings despite that the queue
is empty or there is at least enough space to restart it.
Make idpf_tx_maybe_stop_common() inline and returning true or false,
handling the return of netif_txq_maybe_stop() properly. Use a correct
goto in idpf_tx_maybe_stop_splitq() to avoid stopping the queue or
incrementing the stops counter twice.
Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit")
Fixes: a5ab9ee0df0b ("idpf: add singleq start_xmit and napi poll")
Cc: stable@vger.kernel.org # 6.7+
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a mechanism to guard against stashing partial packets into the hash
table to make the driver more robust, with more efficient decision
making when cleaning.
Don't stash partial packets. This can happen when an RE (Report Event)
completion is received in flow scheduling mode, or when an out of order
RS (Report Status) completion is received. The first buffer with the skb
is stashed, but some or all of its frags are not because the stack is
out of reserve buffers. This leaves the ring in a weird state since
the frags are still on the ring.
Use the field libeth_sqe::nr_frags to track the number of
fragments/tx_bufs representing the packet. The clean routines check to
make sure there are enough reserve buffers on the stack before stashing
any part of the packet. If there are not, next_to_clean is left pointing
to the first buffer of the packet that failed to be stashed. This leaves
the whole packet on the ring, and the next time around, cleaning will
start from this packet.
An RS completion is still expected for this packet in either case. So
instead of being cleaned from the hash table, it will be cleaned from
the ring directly. This should all still be fine since the DESC_UNUSED
and BUFS_UNUSED will reflect the state of the ring. If we ever fall
below the thresholds, the TxQ will still be stopped, giving the
completion queue time to catch up. This may lead to stopping the queue
more frequently, but it guarantees the Tx ring will always be in a good
state.
Also, always use the idpf_tx_splitq_clean function to clean descriptors,
i.e. use it from clean_buf_ring as well. This way we avoid duplicating
the logic and make sure we're using the same reserve buffers guard rail.
This does require a switch from the s16 next_to_clean overflow
descriptor ring wrap calculation to u16 and the normal ring size check.
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
&idpf_tx_buffer is almost identical to the previous generations, as well
as the way it's handled. Moreover, relying on dma_unmap_addr() and
!!buf->skb instead of explicit defining of buffer's type was never good.
Use the newly added libeth helpers to do it properly and reduce the
copy-paste around the Tx code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
'req_vec_chunks' is used to store the vector info received
from the device control plane. The memory for it is allocated
in idpf_send_alloc_vectors_msg and returns an error if the memory
allocation fails.
'req_vec_chunks' cannot be NULL in the later code flow. So remove
the conditional check to extract the vector ids received from
the device control plane.
Smatch static checker warning:
drivers/net/ethernet/intel/idpf/idpf_lib.c:417 idpf_intr_req()
error: we previously assumed 'adapter->req_vec_chunks'
could be null (see line 360)
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-wired-lan/a355ae8a-9011-4a85-a4d1-5b2793bb5f7b@stanley.mountain/
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240814175903.4166390-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The second tagged commit started sometimes (very rarely, but possible)
throwing WARNs from
net/core/page_pool.c:page_pool_disable_direct_recycling().
Turned out idpf frees interrupt vectors with embedded NAPIs *before*
freeing the queues making page_pools' NAPI pointers lead to freed
memory before these pools are destroyed by libeth.
It's not clear whether there are other accesses to the freed vectors
when destroying the queues, but anyway, we usually free queue/interrupt
vectors only when the queues are destroyed and the NAPIs are guaranteed
to not be referenced anywhere.
Invert the allocation and freeing logic making queue/interrupt vectors
be allocated first and freed last. Vectors don't require queues to be
present, so this is safe. Additionally, this change allows to remove
that useless queue->q_vector pointer cleanup, as vectors are still
valid when freeing the queues (+ both are freed within one function,
so it's not clear why nullify the pointers at all).
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues")
Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The initialization of vport interrupt consists of two functions:
1) idpf_vport_intr_init() where a generic configuration is done
2) idpf_vport_intr_req_irq() where the irq for each q_vector is
requested.
The first function used to create a base name for each interrupt using
"kasprintf()" call. Unfortunately, although that call allocated memory
for a text buffer, that memory was never released.
Fix this by removing creating the interrupt base name in 1).
Instead, always create a full interrupt name in the function 2), because
there is no need to create a base name separately, considering that the
function 2) is never called out of idpf_vport_intr_init() context.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Cc: stable@vger.kernel.org # 6.7
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The second tagged commit introduced a UAF, as it removed restoring
q_vector->vport pointers after reinitializating the structures.
This is due to that all queue allocation functions are performed here
with the new temporary vport structure and those functions rewrite
the backpointers to the vport. Then, this new struct is freed and
the pointers start leading to nowhere.
But generally speaking, the current logic is very fragile. It claims
to be more reliable when the system is low on memory, but in fact, it
consumes two times more memory as at the moment of running this
function, there are two vports allocated with their queues and vectors.
Moreover, it claims to prevent the driver from running into "bad state",
but in fact, any error during the rebuild leaves the old vport in the
partially allocated state.
Finally, if the interface is down when the function is called, it always
allocates a new queue set, but when the user decides to enable the
interface later on, vport_open() allocates them once again, IOW there's
a clear memory leak here.
Just don't allocate a new queue set when performing a reset, that solves
crashes and memory leaks. Readd the old queue number and reopen the
interface on rollback - that solves limbo states when the device is left
disabled and/or without HW queues enabled.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Fixes: e4891e4687c8 ("idpf: split &idpf_queue into 4 strictly-typed queue structures")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
idpf uses Page Pool for data buffers with hardcoded buffer lengths of
4k for "classic" buffers and 2k for "short" ones. This is not flexible
and does not ensure optimal memory usage. Why would you need 4k buffers
when the MTU is 1500?
Use libeth for the data buffers and don't hardcode any buffer sizes. Let
them be calculated from the MTU for "classics" and then divide the
truesize by 2 for "short" ones. The memory usage is now greatly reduced
and 2 buffer queues starts make sense: on frames <= 1024, you'll recycle
(and resync) a page only after 4 HW writes rather than two.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, idpf uses the following model for the header buffers:
* buffers are allocated via dma_alloc_coherent();
* when receiving, napi_alloc_skb() is called and then the header is
copied to the newly allocated linear part.
This is far from optimal as DMA coherent zone is slow on many systems
and memcpy() neutralizes the idea and benefits of the header split. Not
speaking of that XDP can't be run on DMA coherent buffers, but at the
same time the idea of allocating an skb to run XDP program is ill.
Instead, use libeth to create page_pools for the header buffers, allocate
them dynamically and then build an skb via napi_build_skb() around them
with no memory copy. With one exception...
When you enable header split, you expect you'll always have a separate
header buffer, so that you could reserve headroom and tailroom only
there and then use full buffers for the data. For example, this is how
TCP zerocopy works -- you have to have the payload aligned to PAGE_SIZE.
The current hardware running idpf does *not* guarantee that you'll
always have headers placed separately. For example, on my setup, even
ICMP packets are written as one piece to the data buffers. You can't
build a valid skb around a data buffer in this case.
To not complicate things and not lose TCP zerocopy etc., when such thing
happens, use the empty header buffer and pull either full frame (if it's
short) or the Ethernet header there and build an skb around it. GRO
layer will pull more from the data buffer later. This W/A will hopefully
be removed one day.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Page Pool Ethtool stats are deprecated since the Netlink Page Pool
interface introduction.
idpf receives big changes in Rx buffer management, including &page_pool
layout, so keeping these deprecated stats does only harm, not speaking
of that CONFIG_IDPF selects CONFIG_PAGE_POOL_STATS unconditionally,
while the latter is often turned off for better performance.
Remove all the references to PP stats from the Ethtool code. The stats
are still available in their full via the generic Netlink interface.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf's in-kernel parsed ptype structure is almost identical to the one
used in the previous Intel drivers, which means it can be converted to
use libeth's definitions and even helpers. The only difference is that
it doesn't use a constant table (libie), rather than one obtained from
the device.
Remove the driver counterpart and use libeth's helpers for hashes and
checksums. This slightly optimizes skb fields processing due to faster
checks. Also don't define big static array of ptypes in &idpf_vport --
allocate them dynamically. The pointer to it is anyway cached in
&idpf_rx_queue.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, all HW supporting idpf supports the singleq model, but none
of it advertises it by default, as splitq is supported and preferred
for multiple reasons. Still, this almost dead code often times adds
hotpath branches and redundant cacheline accesses.
While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
the singleq code only when it's enabled manually. This corresponds to
-10 Kb of object code size and a good bunch of hotpath checks.
idpf_is_queue_model_split() works as a gate and compiles out to `true`
when the config option is disabled.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It makes no sense to have a second &net_device_ops struct (800 bytes of
rodata) with only one difference in .ndo_start_xmit, which can easily
be just one `if`. This `if` is a drop in the ocean and you won't see
any difference.
Define unified idpf_xmit_start(). The preparation for sending is the
same, just call either idpf_tx_splitq_frame() or idpf_tx_singleq_frame()
depending on the active model to actually map and send the skb.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Now that the queue and queue vector structures are separated and laid
out optimally, group the fields as read-mostly, read-write, and cold
cachelines and add size assertions to make sure new features won't push
something out of its place and provoke perf regression.
Despite looking innocent, this gives up to 2% of perf bump on Rx.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With CONFIG_MAXSMP, sizeof(cpumask_t) is 1 Kb. The queue vector
structure has them embedded, which means 1 additional Kb of not
really hotpath data.
We have cpumask_var_t, which is either an embedded cpumask or a pointer
for allocating it dynamically when it's big. Use it instead of plain
cpumasks and put &idpf_q_vector on a good diet.
Also remove redundant pointer to the interrupt name from the structure.
request_irq() saves it and free_irq() returns it on deinit, so that you
can free the memory.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, sizeof(struct idpf_queue) is 32 Kb.
This is due to the 12-bit hashtable declaration at the end of the queue.
This HT is needed only for Tx queues when the flow scheduling mode is
enabled. But &idpf_queue is unified for all of the queue types,
provoking excessive memory usage.
The unified structure in general makes the code less effective via
suboptimal fields placement. You can't avoid that unless you make unions
each 2 fields. Even then, different field alignment etc., doesn't allow
you to optimize things to the limit.
Split &idpf_queue into 4 structures corresponding to the queue types:
RQ (Rx queue), SQ (Tx queue), FQ (buffer queue), and CQ (completion
queue). Place only needed fields there and shortcuts handy for hotpath.
Allocate the abovementioned hashtable dynamically and only when needed,
keeping &idpf_tx_queue relatively short (192 bytes, same as Rx). This HT
is used only for OOO completions, which aren't really hotpath anyway.
Note that this change must be done atomically, otherwise it's really
easy to get lost and miss something.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In C, we have structures and unions.
Casting `void *` via macros is not only error-prone, but also looks
confusing and awful in general.
In preparation for splitting the queue structs, replace it with a
union and direct array dereferences.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.
This naturally leads to user being able to trigger a crash with an invalid
input. This is how:
1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
combined number is not specified, so command becomes {rx_count = 0,
tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
comparing (combined_count + rx_count) and (combined_count + tx_count)
to zero. Obviously, (40 + 0) is greater than zero, so the core code
deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
configuration.
The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].
Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.
Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://lore.kernel.org/netdev/20240418095857.2827-1-larysa.zaremba@intel.com/
[1] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Disabling tcp-data-split on idpf silently fails:
# ethtool -G $NETDEV tcp-data-split off
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: on
But it works if you also change 'tx' or 'rx':
# ethtool -G $NETDEV tcp-data-split off tx 256
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: off
The bug is in idpf_set_ringparam, where it takes a shortcut out if the
TX and RX sizes are not changing. Fix it by checking also if the
tcp-data-split setting remains unchanged. Only then can the soft reset
be skipped.
Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam")
Reported-by: Xu Du <xudu@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-36182
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/ip_gre.c
17af420545a7 ("erspan: make sure erspan_base_hdr is present in skb->head")
5832c4a77d69 ("ip_tunnel: convert __be16 tunnel flags to bitmaps")
https://lore.kernel.org/all/20240402103253.3b54a1cf@canb.auug.org.au/
Adjacent changes:
net/ipv6/ip6_fib.c
d21d40605bca ("ipv6: Fix infinite recursion in fib6_dump_done().")
5fc68320c1fb ("ipv6: remove RTNL protection from inet6_dump_fib()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the very rare case where a packet type is unknown to the driver,
idpf_rx_process_skb_fields would return early without calling
eth_type_trans to set the skb protocol / the network layer handler.
This is especially problematic if tcpdump is running when such a
packet is received, i.e. it would cause a kernel panic.
Instead, call eth_type_trans for every single packet, even when
the packet type is unknown.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Reported-by: Balazs Nemeth <bnemeth@redhat.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Salvatore Daniele <sdaniele@redhat.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Both virtchnl2.h and its consumer idpf_virtchnl.c are very error-prone.
There are 10 structures with flexible arrays at the end, but 9 of them
has flex member counter in Little Endian.
Make the code a bit more robust by applying __counted_by_le() to those
9. LE platforms is the main target for this driver, so they would
receive additional protection.
While we're here, add __counted_by() to virtchnl2_ptype::proto_id, as
its counter is `u8` regardless of the Endianness.
Compile test on x86_64 (LE) didn't reveal any new issues after applying
the attributes.
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240327142241.1745989-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To ease maintaining of virtchnl2.h, which already is messy enough,
make it self-contained by adding missing if_ether.h include due to
%ETH_ALEN usage.
At the same time, virtchnl2_lan_desc.h is not used anywhere in the
file, so move this include to idpf_txrx.h to speed up C preprocessing.
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240327142241.1745989-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility
of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is
implied. The only practical choice the caller has is whether to
set __GFP_NOWARN. But that's a false choice, too, allocation failures
in atomic context will happen, and printing warnings in logs,
effectively for a packet drop, is both too much and very likely
non-actionable.
This leads me to a conclusion that most uses of napi_alloc_skb()
are simply misguided, and should use __GFP_NOWARN in the first
place. We also have a "standard" way of reporting allocation
failures via the queue stat API (qstats::rx-alloc-fail).
The direct motivation for this patch is that one of the drivers
used at Meta calls napi_alloc_skb() (so prior to this patch without
__GFP_NOWARN), and the resulting OOM warning is the top networking
warning in our fleet.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix softirq's not being handled during napi_schedule() call when
receiving marker packets for queue disable by disabling local bottom
half.
The issue can be seen on ifdown:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
Using ftrace to catch the failing scenario:
ifconfig [003] d.... 22739.830624: softirq_raise: vec=3 [action=NET_RX]
<idle>-0 [003] ..s.. 22739.831357: softirq_entry: vec=3 [action=NET_RX]
No interrupt and CPU is idle.
After the patch when disabling local BH before calling napi_schedule:
ifconfig [003] d.... 22993.928336: softirq_raise: vec=3 [action=NET_RX]
ifconfig [003] ..s1. 22993.928337: softirq_entry: vec=3 [action=NET_RX]
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This error message is at best not really helpful and at worst
misleading. If we're here in idpf_intr_rel we're likely trying to do
remove or reset. If we're in reset, this message will fail because we
lose the virtchnl on reset and HW is going to clean up those resources
regardless in that case. If we're in remove and we get an error here,
we're going to reset the device at the end of remove anyway so not a big
deal. Just remove this message it's not useful.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
While we're here improving virtchnl we can include two minor fixes for
the lower level ctrlq flow.
This adds a memory barrier to idpf_post_rx_buffs before we update tail
on the controlq. We should make sure our writes have had a chance to
finish before we tell HW it can touch them.
This also removes some defensive programming in idpf_ctrlq_recv. The
caller should not be using a num_q_msg value of zero or more than the
ring size and it's their responsibility to call functions sanely.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
