| Age | Commit message (Collapse) | Author |
|---|
|
Similar to the TX, RX also supports both single and split queue models.
In single queue model, the same descriptor queue is used by SW to post
buffer descriptors to HW and by HW to post completed descriptors
to SW. In split queue model, "RX buffer queues" are used to pass
descriptor buffers from SW to HW whereas "RX queues" are used to
post the descriptor completions i.e. descriptors that point to
completed buffers, from HW to SW. "RX queue group" is a set of
RX queues grouped together and will be serviced by a "RX buffer queue
group". IDPF supports 2 buffer queues i.e. large buffer (4KB) queue
and small buffer (2KB) queue per buffer queue group. HW uses large
buffers for 'hardware gro' feature and also if the packet size is
more than 2KB, if not 2KB buffers are used.
Add all the resources required for the RX queues initialization.
Allocate memory for the RX queue and RX buffer queue groups. Initialize
the software maintained refill queues for buffer management algorithm.
Same like the TX queues, initialize the queue parameters for the RX
queues and send the config RX queue virtchnl message to the device
Control Plane.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
IDPF supports two queue models i.e. single queue which is a traditional
queueing model as well as split queue model. In single queue model,
the same descriptor queue is used by SW to post descriptors to the HW,
HW to post completed descriptors to SW. In split queue model, "TX Queues"
are used to pass buffers from SW to HW and "TX Completion Queues"
are used to post descriptor completions from HW to SW. Device supports
asymmetric ratio of TX queues to TX completion queues. Considering
this, queue group mechanism is used i.e. some TX queues are grouped
together which will be serviced by only one TX completion queue
per TX queue group.
Add all the resources required for the TX queues initialization.
To start with, allocate memory for the TX queue groups, TX queues and
TX completion queues. Then, allocate the descriptors for both TX and
TX completion queues, and bookkeeping buffers for TX queues alone.
Also, allocate queue vectors for the vport and initialize the TX queue
related fields for each queue vector.
Initialize the queue parameters such as q_id, q_type and tail register
offset with the info received from the device control plane (CP).
Once all the TX queues are configured, send config TX queue virtchnl
message to the CP with all the TX queue context information.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add the required support to create a vport by spawning
the init task. Once the vport is created, initialize and
allocate the resources needed for it. Configure and register
a netdev for each vport with all the features supported
by the device based on the capabilities received from the
device Control Plane. Spawn the init task till all the default
vports are created.
Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
