summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf
AgeCommit message (Collapse)Author
2016-02-03i40evf: null out ring pointers on freeMitch Williams
Since we check these ring pointers to make sure we don't double-allocate or double-free the rings, we had better null them out after we free them. In very rare cases this can cause a panic if the driver is removed during reset recovery. Change-ID: Ib06eb4910a3058275c8f7ec5ef7f45baa4674f96 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: define function capabilities in only one placeShannon Nelson
The device capabilities were defined in two places, and neither had all the definitions. It really belongs with the AQ API definition, so this patch removes the other set of definitions and fills out the missing item. Change-ID: I273ba7d79a476cd11d2e0ca5825fec1716740de2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40evf: allow channel bonding of VFsMitch Williams
In some modes, bonding would not enslave VF interfaces. This is due to bonding calling change_mtu and the immediately calling open. Because of the asynchronous nature of the admin queue mechanism, the VF returns -EBUSY to the open call, because it knows the previous operation hasn't finished yet. This causes bonding to fail with a less-than-useful error message. To fix this, remove the check for pending operations at the beginning of open. But this introduces a new bug where the driver will panic on a quick close/open cycle. To fix that, we add a new driver state, __I40EVF_DOWN_PENDING, that the driver enters when down is called. The driver finally transitions to a fully DOWN state when it receives confirmation from the PF driver that all the queues are disabled. This allows open to complete even if there is a pending mtu change, and bonding is finally happy. Change-ID: I06f4c7e435d5bacbfceaa7c3f209e0ff04be21cc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e/i40evf: Fix RSS rx-flow-hash configuration through ethtoolAnjali Singhai Jain
This patch fixes the Hash PCTYPE enable for X722 since it supports a broader selection of PCTYPES for TCP and UDP. This patch also fixes a bug in XL710, X710, X722 support for RSS, as of now we cannot reduce the (4)tuple for RSS for TCP/IPv4/IPV6 or UDP/IPv4/IPv6 packets since this requires a product feature change that comes in a later release. A VF should never be allowed to change the tuples for RSS for any PCTYPE since that's a global setting for the device in case of i40e devices. Change-ID: I0ee7203c9b24813260f58f3220798bc9d9ac4a12 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
2016-01-08i40e: remove forever unused IDJesse Brandeburg
Somehow an ID that has never been productized is in the code. There are no plans to use it, so just get rid of it. Change-ID: I59117d48ea9ee0360b0fe33833ac8092f8a24b4c Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Fix Rx hash reported to the stack by our driverAnjali Singhai Jain
If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15sctp: Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRCTom Herbert
The SCTP checksum is really a CRC and is very different from the standards 1's complement checksum that serves as the checksum for IP protocols. This offload interface is also very different. Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC to highlight these differences. The term CSUM should be reserved in the stack to refer to the standard 1's complement IP checksum. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-12i40e/i40evf: Bump i40e to 1.4.8 and i40evf to 1.4.4Catherine Sullivan
Bump. Change-ID: I2b8976bde070244de144e2ed8990b083de39f332 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12i40evf: change version string generationMitch Williams
Generate version strings like the PF driver does. This gives us more flexibility to add suffixes to the version string at build time. Change-ID: I0a5ca0783dd8fb849516bfc1e37ea070127847bd Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12i40e/i40evf: Add a new offload for RSS PCTYPE V2 for X722Anjali Singhai Jain
X722 supports Expanded version of TCP, UDP PCTYPES for RSS. Add a Virtchnl offload to support this. Without this patch with X722 devices, driver will set wrong PCTYPES for VF and UDP flows will not fan out. Change-ID: I04fe4988253b7cd108c9179a643c969764efcb76 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12i40e: Opcode and structures required by OEM Post Update AQ command and add ↵Michal Kosiarz
new NVM arq message This is a part of implementation which contains data structures and opcode for new AQ command. There's a new ARQ message that gets sent near the end of the NVM update process that the driver should recognize and ignore, rather than printing an Unknown Event error. Change-ID: I04830a5bcae14823e16b9424cc4165e169336c1f Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12i40evf: check rings before freeing resourcesMitch Williams
If the driver gets unloaded during reset recovery, it's possible that it will attempt to free resources when they're already free. Add a check to make sure that the Tx and Rx rings actually exist before dereferencing them to free resources. Change-ID: I4d2b7e9ede49f634d421a4c5deaa5446bc755eee Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-08treewide: Fix typos in printkMasanari Iida
This patch fix multiple spelling typos found in various part of kernel. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-03i40e/i40evf: avoid mutex re-initJesse Brandeburg
If the driver were to happen to have a mutex held while the i40e_init_adminq call was called, the init_adminq might inadvertently call mutex_init on a lock that was held which is a violation of the calling semantics. Fix this by avoiding adminq.c code allocating/freeing this memory, and then do the same work only once in probe/remove. Testing Hints (Required if no HSD): for VF, load i40evf in bare metal and echo 32 > sriov_numvfs; echo 0 > sriov_numvfs in a loop. Yes this is a horrible thing to do. Change-ID: Ida263c51b34e195252179e7e5e400d73a99be7a2 Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: trivial fixesJesse Brandeburg
1) remove duplicate include of tcp.h 2) put an ampersand at the end of a line instead of the beginning 3) remove a useless dev_info 4) match declaration of function to the implementation 5) repair incorrect comment 6) correct whitespace 7) remove unused define Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e/i40evf: Bump version to 1.4.7 for i40e and 1.4.3 for i40evfCatherine Sullivan
Bump. Change-ID: Id8c83c64c973349a722bab40d285ad8ded8c28f7 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e/i40evf: use logical operatorMitch Williams
We shouldn't be using a bitwise operator here; it's not a bitwise operation. Use a logical operator instead. Why doesn't c have a logical-or-and-assign operator? Change-ID: Id84f3ca884910bed7073c84b1e16a102e958d0de Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: use correct typesMitch Williams
Don't use uint32_t type the kernel. Use u32 instead. No functional change. Change-ID: I77bbf3b6464edaef747c7104b43534032a4dba63 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: don't use atomic allocationMitch Williams
These allocations don't need to be at atomic level. GFP_KERNEL is fine and they'll reduce stress on the allocator when the system is starved for memory. Change-ID: I3561d0399a681de0ad25291b6c848b224c1fde12 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: Fix memory leaks, sideband filter programmingKiran Patil
This patch fixes the memory leak which would be seen otherwise when user programs flow-director filter using ethtool (sideband filter programming). When ethtool is used to program flow directory filter, 'raw_buf' gets allocated and it is supposed to be freed as part of queue cleanup. But check of 'tx_buffer->skb' was preventing it from being freed. Change-ID: Ief4f0a1a32a653180498bf6e987c1b4342ab8923 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: Detection and recovery of TX queue hung logic moved to service_task ↵Kiran Patil
from tx_timeout This patch contains following changes: - detection and recovery logic (issue SW interrupt) has been moved to service_task from timeout function. - added some more debug info from tx_timeout. Logic to detect and recover TX queue hung is now two step process: - service_task detects TX queue hung and sets a bit(hung_detected) if it was not set. - if bit was set (means this is back-back hung condition detected), issue SW interrupt and clear the bit. - napi_poll clears the bit unconditionally since it cleans TX/RX queues. Change-ID: Ieed03a48927c845a988b3ff375090bf37caeb903 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: remove duplicate stringMitch Williams
We already print the driver info string in probe, so don't print it again in init. No need to repeat. No need to repeat. Change-ID: Ief597997f580a8c54d5950e3a84c29f2075be66b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: set real num queuesMitch Williams
Use the helper function to set the real number of RX queues, and also set the real number of TX queues. Change-ID: I67982799de3f248fb4158ccdc9b1a74385f42ddd Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: increase max number of queuesMitch Williams
Future devices will allow for more queue pairs, so allocate a netdev that can handle them. While we're at it, get rid of the separate MAX_TX/MAX_RX defines. Since we always get matched queue pairs, having these makes no sense. Change-ID: I0e3556cd9a962506e509eb7c0afa36b329e8cb51 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: Bump i40e version to 1.4.4 and i40evf to 1.4.1Catherine Sullivan
Bump. Change-ID: I00ebbb2e5e5572f947502b8f6db4d94f666d6b14 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: allocate ring structs dynamicallyMitch Williams
Instead of awkwardly keeping a fixed array of pointers in the adapter struct and then allocating ring structs individually, just keep a single pointer and allocate a single blob for the arrays. This simplifies code, shrinks the adapter structure, and future-proofs the driver by not limiting the number of rings we can handle. Change-ID: I31334ff911a6474954232cfe4bc98ccca3c769ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: allocate queue vectors dynamicallyMitch Williams
Change the queue_vector array from a statically-sized member of the adapter structure to a dynamically-allocated and -sized array. This reduces the size of the adapter structure, and allows us to support any number of queue vectors in the future without changing the code. Change-ID: I08dc622cb2f2ad01e832e51c1ad9b86524730693 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: quoth the VF driver, NevermoreMitch Williams
If, upon a midnight dreary, the PF returns ERR_PARAM when the VF is requesting resources, that's fatal. Either the firmware or NVM is badly, badly misconfigured, or this VF has been disabled due to a previous VF driver sending a bunch of bogus messages. Either way, there is no recovery from this. Don't ponder weak and weary, just quit. Change-ID: I09d9f16cc4ee7fec3b57646a289d33838c1c5bf5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: add new fields to store user configuration of RSSHelin Zhang
This patch adds new fields to i40e_vsi to store user configured RSS config data and code to use it. Change-ID: Ic5d3db8d9df52182b560248f8cdca9c5c7546879 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: create a generic get RSS functionHelin Zhang
There are two ways to get RSS, this patch implements two functions with the same input parameters, and creates a more generic function for getting RSS configuration. Change-ID: I12d3b712c21455d47dd0a5aae58fc9b7c680db59 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: create a generic config RSS functionHelin Zhang
There are two ways to configure RSS, this patch adjusts those two functions with the same input parameters, and creates a more generic function for configuring RSS. Change-ID: Iace73bdeba4831909979bef221011060ab327f71 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: rename VF adapter specific RSS functionHelin Zhang
This patch renames old VF adapter specific RSS function to clarify its scope. Change-ID: Ie5253083a44c677ebb7709a8a3a18402ad2dc6a6 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: prefetch skb data on transmitJesse Brandeburg
Issue a prefetch for data early in the transmit path. This should not be generally needed for Tx traffic, but it helps immensely for pktgen workloads and should help for forwarding workloads as well. Change-ID: Iefee870c20599e0c4240e1d8637e4f16b625f83a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: Fix RS bit update in Tx path and disable force WB workaroundAnjali Singhai Jain
This patch fixes the issue of forcing WB too often causing us to not benefit from NAPI. Without this patch we were forcing WB/arming interrupt too often taking away the benefits of NAPI and causing a performance impact. With this patch we disable force WB in the clean routine for X710 and XL710 adapters. X722 adapters do not enable interrupt to force a WB and benefit from WB_ON_ITR and hence force WB is left enabled for those adapters. For XL710 and X710 adapters if we have less than 4 packets pending a software Interrupt triggered from service task will force a WB. This patch also changes the conditions for setting RS bit as described in code comments. This optimizes when the HW does a tail bump amd when it does a WB. It also optimizes when we do a wmb. Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-25i40evf: handle many MAC filters correctlyMitch Williams
When a lot (many hundreds) of MAC or VLAN filters are added at one time, we can overflow the Admin Queue buffer size with all the requests. Unfortunately, the driver would then calculate the message size incorrectly, causing it to be rejected by the PF. Furthermore, there was no mechanism to trigger another request to allow for configuring the rest of the filters that didn't fit into the first request. To fix this, recalculate the correct buffer size when we detect the overflow condition instead of just assuming the max buffer size. Also, don't clear the request bit in adapter->aq_required when we have an overflow, so that the rest of the filters can be processed later. Change-ID: Idd7cbbc5af31315e0dcb1b10e6a02ad9817ce65c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-25i40e/i40evf: clean up error messagesMitch Williams
Clean up and enhance error messages related to VF MAC/VLAN filters. Indicate which VF is having issues, and if possible indicate the MAC address or VLAN involved. Also, when an error is returned from the PF driver, print useful information about what went wrong, for the most likely cases. Change-ID: Ib3d15eef9e3369a78fd142948671e5fa26d921b8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-25i40e/i40evf: Add comment to #endifHelin Zhang
Add a comment to the #endif to more easily match it with its #if. Change-ID: I47eb0a60a17dc6d2f01a930e45006d2dc82e044f Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-25i40e/i40evf: Add a stat to track how many times we have to do a force WBAnjali Singhai Jain
When in NAPI with interrupts disabled, the HW needs to be forced to do a write back on TX if the number of descriptors pending are less than a cache line. This stat helps keep track of how many times we get into this situation. Change-ID: I76c1bcc7ebccd6bffcc5aa33bfe05f2fa1c9a984 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-25i40e/i40evf: remove unused tunnel parameterShannon Nelson
Code was moved into a separate function some time ago. Change-ID: Icabbe71ce05cf5d716d3e1152cdd9cd41d11bcb5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-23i40evf: fix compiler warning of unused variableJesse Brandeburg
Compiler complained of an unused variable, which the driver was just using to store the result of a rd32 which is used to clear a register unconditionally. Just drop the unused variable and re-use one. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-18net: move skb_mark_napi_id() into core networking stackEric Dumazet
We would like to automatically provide busy polling support to all NAPI drivers, without them having to implement anything. skb_mark_napi_id() can be called from napi_gro_receive() and napi_get_frags(). Few drivers are still calling skb_mark_napi_id() because they use netif_receive_skb(). They should eventually call napi_gro_receive() instead. I will leave this to drivers maintainers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-06Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig to clean up various abuses of headers in there. The patch to rename the io-64-nonatomic-*.h headers caused some conflicts with new users, so I added a workaround that we can remove in the next merge window. The only other patch is a warning fix from Marek Vasut" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations gpio-mxc: stop including <asm-generic/bug> n_tracesink: stop including <asm-generic/bug> n_tracerouter: stop including <asm-generic/bug> mlx5: stop including <asm-generic/kmap_types.h> hifn_795x: stop including <asm-generic/kmap_types.h> drbd: stop including <asm-generic/kmap_types.h> move count_zeroes.h out of asm-generic move io-64-nonatomic*.h out of asm-generic
2015-10-23i40evf: clean up local variable initializationJean Sacren
In i40evf_msix_aq(), the first two lines of rd32() are mainly to clear the registers. If we initialize 'val' at this point, it will be overwritten immediately. We shall simply discard the return value here. When we initialize 'val', we might as well include the mask in one step. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40evf: add missing kernel-doc argumentJean Sacren
@flush has been missing since the inception of i40evf_irq_enable(). Add it for the kernel doc. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: re-use %*ph specifier to hexdump a dataAndy Shevchenko
Instead of using a custom approach change the code to use %*ph format specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e/i40evf: Bump i40e to 1.3.46 and i40evf to 1.3.33Catherine Sullivan
Bump up the version... Change-ID: Ib8d501021671ba20250115ed54330e2c182255b7 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40evf: use correct struct for list manipulationMitch Williams
Not sure how this compiles at all. Use the correct struct for manipulating the VLAN filter list. Without this, the VLAN filter list doesn't get processed correctly, and VLAN filters will not be re-enabled after any kind of reset. Change-ID: Iceff2dc089f303058fb71ecb08419eed471e0e90 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e/i40evf: Add a workaround to drop all flow control framesAnjali Singhai Jain
This patch adds a workaround to drop any flow control frames from being transmitted from any VSI. FW can still send flow control frames if flow control is enabled. With this patch in place a malicious VF cannot send flow control or PFC packets out on the wire. Change-ID: I4303b24e98b93066d2767fec24dfe78be591c277 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 13:19:57 +0000