summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2016-12-06i40e: use unsigned printf format specifier for active_filters countJacob Keller
Replace the %d specifier used for printing vsi->active_filters and vsi->promisc_threshold with an unsigned %u format specifier. While it is unlikely in practice that these values will ever reach such a large number they are unsigned values and thus should not be interpreted as negative numbers. Change-ID: Iff050fad5a1c8537c4c57fcd527441cd95cfc0d4 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06Changed version from 1.6.21 to 1.6.25Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: Blink LED on 1G BaseT boardsHenry Tieman
Before this patch "ethtool -p" was not blinking the LEDs on boards with 1G BaseT PHYs. This commit identifies 1G BaseT boards as having the LEDs connected to the MAC. Also, renamed the flag to be more descriptive of usage. The flag is now I40E_FLAG_PHY_CONTROLS_LEDS. Change-ID: I4eb741da9780da7849ddf2dc4c0cb27ffa42a801 Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: remove code to handle dev_addr speciallyJacob Keller
The netdev->dev_addr MAC filter already exists in the MAC/VLAN hash table, as it is added when we configure the netdev in i40e_configure_netdev. Because we already know that this address will be updated in the hash_for_each loops, we do not need to handle it specially. This removes duplicate code and simplifies the i40e_vsi_add_vlan and i40e_vsi_kill_vlan functions. Because we know these filters must be part of the MAC/VLAN hash table, this should not have any functional impact on what filters are included and is merely a code simplification. Change-ID: I5e648302dbdd7cc29efc6d203b7019c11f0b5705 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e/i40evf: napi_poll must return the work doneAlexander Duyck
Currently the function i40e_napi-poll() returns 0 when it clean completely the Rx rings, but this foul budget accounting in core code. Fix this by returning the actual work done, capped to budget - 1, since the core doesn't allow to return the full budget when the driver modifies the NAPI status This is based on a similar change that was made for the ixgbe driver by Paolo Abeni. Change-ID: Ic3d93ad2fa2fc8ce3164bc461e69367da0f9173b Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: restore workaround for removing default MAC filterJacob Keller
A previous commit 53cb6e9e8949 ("i40e: Removal of workaround for simple MAC address filter deletion") removed a workaround for some firmware versions which was reported to not be necessary in production NICs. Unfortunately this workaround is necessary in some configurations, specifically the Ethernet Controller XL710 for 40GbE QSFP+ (8086:1583). Without this patch, the mentioned NICs with current firmware exhibit issues when adding VLANs, as outlined by the following reproduction: $modprobe i40e $ip link set <device> up $ip link add link <device> vlan100 type vlan id 100 $dmesg | tail <snip> kernel: i40e 0000:82:00.0: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on This results in filters being marked as FAILED and setting the device in promiscuous mode. The root cause of receiving the -EINVAL error response appears to be due to a conflict with the default MAC filter which still exists on the default firmware for this device. Attempting to add a new VLAN filter on the default MAC address conflicts with the IGNORE_VLAN setting on the default rule. Change-ID: I4d8f6d48ac5f60cfe981b3baad30eb4d7c170d61 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: simplify txd use count calculationMitch Williams
The i40e_txd_use_count function was fast but confusing. In the comments, it even admits that it's ugly. So replace it with a new function that is (very) slightly faster and has extensive commenting to help the thicker among us (including the author, who will forget in a week) understand how it works. Change-ID: Ifb533f13786a0bf39cb29f77969a5be2c83d9a87 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: Driver prints log message on link speed changeFilip Sadowski
This patch makes the driver log link speed change. Before applying the patch link messages were printed only on state change. Now message is printed when link is brought up or down and when speed changes. Change-ID: Ifbee14b4b16c24967450b3cecac6e8351dcc8f74 Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: change message to only appear when extra debug info is wantedCarolyn Wyborny
This patch changes an X722 informational message so that it only appears when extra messages are desired. Without this patch, on X722 devices, this message appears at load, potentially causing unnecessary alarm. Change-ID: I94f7aae15dc5b2723cc9728c630c72538a3e670e Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e/i40evf: replace for memcpy with single memcpy call in ethtoolJacob Keller
memcpy replaced with single memcpy call in ethtool. Change-ID: I3f5bef6bcc593412c56592c6459784db41575a0a Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: set broadcast promiscuous mode for each active VLANJacob Keller
A previous workaround added to ensure receipt of all broadcast frames incorrectly set the broadcast promiscuous mode unconditionally regardless of active VLAN status. Replace this partial workaround with a complete solution that sets the broadcast promiscuous filters in i40e_sync_vsi_filters. This new method sets the promiscuous mode based on when broadcast filters are added or removed. I40E_VLAN_ANY will request a broadcast filter for all VLANs, (as we're in untagged mode) while a broadcast filter on a specific VLAN will only request broadcast for that VLAN. Thus, we restore addition of broadcast filter to the array, but we add special handling for these such that they enable the broadcast promiscuous mode instead of being sent as regular filters. The end result is that we will correctly receive all broadcast packets (even those with a *source* address equal to the broadcast address) but will not receive packets for which we don't have an active VLAN filter. Change-ID: I7d0585c5cec1a5bf55bf533b42e5e817d5db6a2d Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Fix for ethtool Supported link modesHarshitha Ramamurthy
This patch fixes the problem where the ethtool Supported link modes list backplane interfaces on X722 devices for 10GbE with SFP+ and Cortina retimer. This patch fixes the problem by setting and using a flag for this particular device since the backplane interface is only between the internal PHY and the retimer and it should not be seen by the user as they cannot use it. Without this patch, the user wrongly thinks that backplane interfaces are supported on their device when they actually are not. Change-ID: I3882bc2928431d48a2db03a51a713a1f681a79e9 Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Pass unknown PHY type for unknown PHYsHenry Tieman
The PHY type value for unrecognized PHYs and cables was changed based on firmware version number. Newer hardware use lower firmware version numbers and this was causing some PHYs to be identified as type 0x16 instead of 0xe (unknown). Without this patch, newer card will incorrectly identify unknown PHYs and cables. This change adds hardware type to the check for firmware version so the PHY type is reported correctly. Change-ID: I0723cbfd263c76fc73ff1a5275d1639051376c9a Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Remove unreachable codeHenry Tieman
The code at the end of i40e_read_phy_register_clause22() contained unreachable code and redundant control statements. This change removes the unreachable code. And deletes the redundant goto statement and if statement. Change-ID: I713032b1585396f40f903cbcfdea987abd874400 Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: fix panic on SPARC while changing num of descTushar Dave
On SPARC, writel() should not be used to write directly to memory address but only to memory mapped I/O address otherwise it causes data access exception. Commit 147e81ec75689 ("i40e: Test memory before ethtool alloc succeeds") introduced a code that uses memory address to fake the HW tail address and attempt to write to that address using writel() causes kernel panic on SPARC. The issue is reproduced while changing number of descriptors using ethtool. This change resolves the panic by using HW read-only memory mapped I/O register to fake HW tail address instead memory address. e.g. > ethtool -G eth2 tx 2048 rx 2048 i40e 0000:03:00.2 eth2: Changing Tx descriptor count from 512 to 2048. i40e 0000:03:00.2 eth2: Changing Rx descriptor count from 512 to 2048 sun4v_data_access_exception: ADDR[fff8001f9734a000] CTX[0000] TYPE[0004], going. \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ ethtool(3273): Dax [#1] CPU: 9 PID: 3273 Comm: ethtool Tainted: G E 4.8.0-linux-net_temp+ #7 task: fff8001f96d7a660 task.stack: fff8001f97348000 TSTATE: 0000009911001601 TPC: 00000000103189e4 TNPC: 00000000103189e8 Y: 00000000 Tainted: G E TPC: <i40e_alloc_rx_buffers+0x124/0x260 [i40e]> g0: fff8001f4eb64000 g1: 00000000000007ff g2: fff8001f9734b92c g3: 00203e0000000000 g4: fff8001f96d7a660 g5: fff8001fa6704000 g6: fff8001f97348000 g7: 0000000000000001 o0: 0006000046706928 o1: 00000000db3e2000 o2: fff8001f00000000 o3: 0000000000002000 o4: 0000000000002000 o5: 0000000000000001 sp: fff8001f9734afc1 ret_pc: 0000000010318a64 RPC: <i40e_alloc_rx_buffers+0x1a4/0x260 [i40e]> l0: fff8001f4e8bffe0 l1: fff8001f4e8cffe0 l2: 00000000000007ff l3: 00000000ff000000 l4: 0000000000ff0000 l5: 000000000000ff00 l6: 0000000000cda6a8 l7: 0000000000e822f0 i0: fff8001f96380000 i1: 0000000000000000 i2: 00203edb00000000 i3: 0006000046706928 i4: 0000000002086320 i5: 0000000000e82370 i6: fff8001f9734b071 i7: 00000000103062d4 I7: <i40e_set_ringparam+0x3b4/0x540 [i40e]> Call Trace: [00000000103062d4] i40e_set_ringparam+0x3b4/0x540 [i40e] [000000000094e2f8] dev_ethtool+0x898/0xbe0 [0000000000965570] dev_ioctl+0x250/0x300 [0000000000923800] sock_do_ioctl+0x40/0x60 [000000000092427c] sock_ioctl+0x7c/0x280 [00000000005ef040] vfs_ioctl+0x20/0x60 [00000000005ef5d4] do_vfs_ioctl+0x194/0x4c0 [00000000005ef974] SyS_ioctl+0x74/0xa0 [0000000000406214] linux_sparc_syscall+0x34/0x44 Disabling lock debugging due to kernel taint Caller[00000000103062d4]: i40e_set_ringparam+0x3b4/0x540 [i40e] Caller[000000000094e2f8]: dev_ethtool+0x898/0xbe0 Caller[0000000000965570]: dev_ioctl+0x250/0x300 Caller[0000000000923800]: sock_do_ioctl+0x40/0x60 Caller[000000000092427c]: sock_ioctl+0x7c/0x280 Caller[00000000005ef040]: vfs_ioctl+0x20/0x60 Caller[00000000005ef5d4]: do_vfs_ioctl+0x194/0x4c0 Caller[00000000005ef974]: SyS_ioctl+0x74/0xa0 Caller[0000000000406214]: linux_sparc_syscall+0x34/0x44 Caller[0000000000107154]: 0x107154 Instruction DUMP: e43620c8 e436204a c45e2038 <c2a083a0> 82102000 81cfe008 90086001 82102000 81cfe008 Kernel panic - not syncing: Fatal exception Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Add protocols over MCTP to i40e_aq_discover_capabilitiesPiotr Raczynski
Add logical_id to I40E_AQ_CAP_ID_MNG_MODE capability starting from major version 2. Change-ID: Idb29214b172ea5c70cbd45a99e6745c0215af7e4 Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: fix trivial typo in naming of i40e_sync_filters_subtaskJacob Keller
A comment incorrectly referred to i40e_vsi_sync_filters_subtask which does not actually exist. Reference the correct function instead. Change-ID: I6bd805c605741ffb6fe34377259bb0d597edfafd Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Add Clause22 implementationMichal Kosiarz
Some external PHYs require Clause22 method for accessing registers. This patch also adds some defines to support blink led on devices using 10CBaseT PHY. Change-ID: I868a4326911900f6c89e7e522fda4968b0825f14 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: avoid duplicate private flags definitionsJacob Keller
Separate the global private flags and the regular private flags per interface into two arrays. Future additions of private flags will not need to be duplicated which may lead to buggy code. Also rename "i40e_priv_flags_strings_gl" to "i40e_gl_priv_flags_strings" for clarity, as it reads more naturally. Change-ID: I68caef3c9954eb7da342d7f9d20f2873186f2758 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: remove second check of VLAN_N_VID in i40e_vlan_rx_add_vidJacob Keller
Replace a check of magic number 4095 with VLAN_N_VID. This makes it obvious that a later check against VLAN_N_VID is always true and can be removed. Change-ID: I28998f127a61a529480ce63d8a07e266f6c63b7b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: remove error_param_int label from i40e_vc_config_promiscuous_mode_msgJacob Keller
This label is unnecessary, as are jumping to a block that checks aq_ret and then immediately skipping it and returning. So just jump straight to the error_param and remove this unnecessary label. Also use goto error_param even in the last check for style consistency. Change-ID: If487c7d10c4048e37c594e5eca167693aaed45f6 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-02i40e: Be much more verbose about what we can and cannot offloadAlexander Duyck
This change makes it so that we are much more robust about defining what we can and cannot offload. Previously we were just checking for the L4 tunnel header length, however there are other fields we should be verifying as there are multiple scenarios in which we cannot perform hardware offloads. In addition the device only supports GSO as long as the MSS is 64 or greater. We were not checking this so an MSS less than that was resulting in Tx hangs. Change-ID: I5e2fd5f3075c73601b4b36327b771c64fcb6c31b Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-10-31i40e: removed unreachable codeFilip Sadowski
Removed some of unnecessary if statements and unreachable code found by static code analysis tool. The return value of i40e_vsi_control_rings(..., false) is always 0. So, test for non-zero will never be true. The function has been split into "int i40e_vsi_start_rings()" and "void i40e_vsi_stop_rings()" for better understanding. Similarly, the function i40e_vsi_kill_vlan() never fails. So, checking for return value is also unnecessary. Function definition changed to void. The i40e_loopback_test() function is not implemented. The function and all references to loopback testing were removed. Change-ID: Id45cf66f6689ce2bc4e887de13f073e30e8431bd Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: Implementation of ERROR state for NVM update state machineMaciej Sosin
This patch adds I40E_NVMUPD_STATE_ERROR state for NVM update. Without this patch driver has no possibility to return NVM image write failure.This state is being set when ARQ rises error. arq_last_status is also updated every time when ARQ event comes, not only on error cases. Change-ID: I67ce43ba22a240773c2821b436e96054db0b7c81 Signed-off-by: Maciej Sosin <maciej.sosin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: Fix for division by zeroMichal Kosiarz
For some cases when reading from device are incorrect or image is incorrect, this part of code causes crash due to division by zero. Change-ID: I8961029a7a87b0a479995823ef8fcbf6471405e1 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: clear mac filter count on resetMitch Williams
When a VF is reset, it gets a new VSI, so all of its MAC filters go away. Correctly set the number of filters to 0 when freeing VF resources. This corrects a problem with failure to add filters when the VF driver is reloaded. Change-ID: I2acbecf734287b67473bb225293e14b5096acbef Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: Reorder logic for coalescing RS bitsAlexander Duyck
This patch reorders the logic at the end of i40e_tx_map to address the fact that the logic was rather convoluted and much larger than it needed to be. In order to try and coalesce the code paths I have updated some of the comments and repurposed some of the variables in order to reduce unnecessary overhead. This patch does the following: 1. Quit tracking skb->xmit_more with a flag, just max out packet_stride 2. Drop tail_bump and do_rs and instead just use desc_count and td_cmd 3. Pull comments from ixgbe that make need for wmb() more explicit. Change-ID: Ic7da85ec75043c634e87fef958109789bcc6317c Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: Add common function for finding VSI by typeAlexander Duyck
This patch adds a common method for finding a VSI by type. The main motivation for doing this is that the Flow Director path actually had two ways of handling this, one stopped on first match and one did not. This patch makes it so that all callers of this function will get the same approach for finding a VSI. Change-ID: Ibf25de8acd8466582520694424aa87da66965fbd Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: replace PTP Rx timestamp hang logicJacob Keller
The current Rx timestamp hang logic is not very robust because it does not notice a register is hung until all four timestamps have been latched and we wait a full 5 seconds. Replace this logic with a newer Rx hang detection based on storing the jiffies when we first notice a receive timestamp event. We store each register's time separately, along with a flag indicating if it is currently latched. Upon first transitioning to latch, we will update the latch_events[i] jiffies value. This indicates the time we first noticed this event. The watchdog routine will simply check that the either the flag has been cleared, or we have passed at least one second. In this case, it is able to clear the Rx timestamp register under the assumption that it was for a dropped frame. The benefit if this strategy is that we should be able to detect and clear out stalled RXTIME_H registers before we exhaust the supply of 4, and avoid complete stall of Rx timestamp events. Change-ID: Id55458c0cd7a5dd0c951ff2b8ac0b2509364131f Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: use a mutex instead of spinlock in PTP user entry pointsJacob Keller
We need a locking mechanism to protect the hardware SYSTIME register which is split over 2 values, and has internal hardware latching. We can't allow multiple accesses at the same time. However.... The spinlock_t is overkill here, especially use of spin_lock_irqsave, since every PTP access will halt hardirqs. Notice that the only places which need the SYSTIME value are user context and are capable of sleeping. Thus, it is safe to use a mutex here instead of the spinlock. Change-ID: I971761a89b58c6aad953590162e85a327fbba232 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: correct check for reading TSYNINDX from the receive descriptorJacob Keller
When hardware has taken a timestamp for a received packet, it indicates which RXTIME register the timestamp was placed in by some bits in the receive descriptor. It uses 3 bits, one to indicate if the descriptor index is valid (ie: there was a timestamp) and 2 bits to indicate which of the 4 registers to read. However, the driver currently does not check the TSYNVALID bit and only checks the index. It assumes a zero index means no timestamp, and a non zero index means a timestamp occurred. While this appears to be true, it prevents ever reading a timestamp in RXTIME[0], and causes the first timestamp the device captures to be ignored. Fix this by using the TSYNVALID bit correctly as the true indicator of whether the packet has an associated timestamp. Also rename the variable rsyn to tsyn as this is more descriptive and matches the register names. Change-ID: I4437e8f3a3df2c2ddb458b0fb61420f3dafc4c12 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: remove duplicate add/delete adminq command code for filtersJacob Keller
We duplicate some code around adding and deleting filters using the adminq interface. This is prone to errors in case there are bugs. Use functions which extract the logic to their own portion so that we don't duplicate it twice in code. Change-ID: I60d68aeb887976787dec00b23ab386a106e61465 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: avoid looping to check whether we're in VLAN modeJacob Keller
We determine that a VSI is in vlan_mode whenever it has any filters with a VLAN other than -1 (I40E_VLAN_ALL). The previous method of doing so was to perform a loop whenever we needed the check. However, we can notice that only place where filters are added (i40e_add_filter) can change the condition from false to true, and the only place we can return to false is in i40e_vsi_sync_filters_subtask. Thus, we can remove the loop and use a boolean directly. Doing this avoids looping over filters repeatedly especially while we're already inside a loop over all the filters. This should reduce the latency of filter operations throughout the driver. Change-ID: Iafde08df588da2a2ea666997d05e11fad8edc338 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: fix MAC filters when removing VLANsAlan Brady
Currently there exists a bug where adding at least one VLAN and then removing all VLANs leaves the mac filters for the VSI with an incorrect value for 'vid' which indicates the mac filter's VLAN status. The current implementation for handling the removal of VLANs is wrong for a couple reasons. The first is that when i40e_vsi_kill_vlan iterates through the MAC filters, it fails to account for the MAC filter status; i.e. it's not accommodating for filters that are about to be deleted. The second problem is that MAC filters can be deleted in other places (specifically i40e_set_rx_mode). Thus if it occurs that all the VLAN MAC filters get deleted we need to switch out of VLAN mode, but the code path through i40e_vsi_kill_vlan has already been executed and we're now stuck in VLAN mode. This patch fixes the issue by removing the check from i40e_vsi_kill_vlan and puts the check instead in i40e_sync_vsi_filters where we're guaranteed to see all filter deletions and can properly detect when we need to switch out of VLAN mode. Change-ID: Ib38fe6034b356eee9a0e20b8a9eeed5ff2debcd9 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: properly cleanup on allocation failure in i40e_sync_vsi_filtersJacob Keller
Currently, we fail to correctly restore filters on the temporary add list when we fail to allocate memory either for deletion or addition. Replace calls to "goto out;" with calls to a new location that correctly handles memory allocation failures. Note that it is safe for us to call i40e_undo_filter_entries on the tmp_del_list even after we've deleted filters because at this point it will be empty, so we don't need to separate the logic for add and delete failure. Change-Id: Iee107fd219c6e03e2fd9645c2debf8e8384a8521 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: store MAC/VLAN filters in a hash with the MAC Address as keyJacob Keller
Replace the mac_filter_list with a static size hash table of 8bits. The primary advantage of this is a decrease in latency of operations related to searching for specific MAC filters, including .set_rx_mode. Using a linked list resulted in several locations which were O(n^2). Using a hash table should give us latency growth closer to O(n*log(n)). Change-ID: I5330bd04053b880e670210933e35830b95948ebb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-10-31i40e: implement __i40e_del_filter and use where applicableJacob Keller
When inside a loop where we call i40e_del_filter we use an O(n^2) pattern where i40e_del_filter calls i40e_find_filter for us. We can avoid this O(n^2) logic by factoring a function, __i40e_del_filter() out from the i40e_del_filter code. This allows us to re-use the delete logic where appropriate without having to search for the filter twice. This new function benefits several functions including i40e_vsi_add_vlan, i40e_vsi_kill_vlan, i40e_del_mac_vlan_all, and i40e_vsi_release. Change-ID: I75fabe0f53bf73f56b80d342e5fdcfcc28f4d3eb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: When searching all MAC/VLAN filters, ignore removed filtersJacob Keller
When adding new MAC address filters, the driver determines if it should behave in VLAN mode (where all MAC addresses get assigned to every existing VLAN) or in non-VLAN mode where MAC addresses get assigned the VLAN_ANY identifier. Under some circumstances it is possible that a VLAN has been marked for removal (such that all filters of that VLAN are set to I40E_FILTER_REMOVE), and a subsequent call to i40e_put_mac_in_vlan may occur prior to the driver subtask that syncs filters to the hardware. In this case, we may add filters to the new removed VLAN, even though it should have been removed. This is most obvious when first adding a new VLAN. We will delete all filters which are in I40E_VLAN_ANY (-1) and then re-add them as in VLAN 0 (untagged). Then before we sync filters, we will add new MAC address filter, which will be added to every VLAN that exists. Unfortunately, this will include I40E_VLAN_ANY, so we will end up incorrectly adding filters to the -1 VLAN. This can be fixed by simply skipping all filters which are marked for removal. A similar check is not necessary in i40e_del_mac_all_vlan, since we are deleting, and any filter which we find already marked for removal would simply be deleted again, which doesn't cause any issues. Change-Id: I7962154013ce02fe950584690aeeb3ed853d0086 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: refactor i40e_put_mac_in_vlan to avoid changing f->vlanJacob Keller
When a PVID has been assigned to a VSI, the function i40e_put_mac_in_vlan arbitrarily modifies all filters to have the same VLAN. This is obviously incorrect because it could be modifying active filters without putting them into the NEW state. The correct method is to remove then re-add filters which is already done in the code where we assign the PVID. Fix this issue and a few other minor nits at the same time. First, when we have a PVID don't even bother looping and simply add the filter with the PVID immediately. In the case of the loop, we now can remove several checks. We also don't need to use i40e_find_filter first before calling i40e_add_filter, since i40e_add_filter implicitly does a lookup already. Finally, update the return semantics of this function so that on failure to add a filter it returns NULL, but on success, it returns the last filter added. Otherwise, we're just returning the last filter in the list. An alternative fix might be to return 0 or an error code, but this is pretty invasive to every call site. Change-ID: I2325dfd843aec76d89fb0d7cb0e7c4f290a34840 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: move i40e_put_mac_in_vlan and i40e_del_mac_all_vlanJacob Keller
A future patch will be modifying these functions and making a call to a static function which currently is defined after these functions. Move them in a separate patch to ease review and ensure the moved code is correct. Change-ID: I2ca7fd4e10c0c07ed2291db1ea41bf5987fc6474 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: make use of __dev_uc_sync and __dev_mc_syncJacob Keller
The kernel provides __dev_uc_sync and __dev_mc_sync in order for drivers which need individual notification of add and delete for each filter. These functions allow us to vastly simplify our .set_rx_mode handler. We need to implement two functions for sync and unsync which add and remove filters respectively. This change avoids a very complex and inefficient algorithm which resulted in an abnormal latency for the .set_rx_mode NDO operation. The resulting code after this change is more readable, more efficient, and less code. Due to the callback signature used by these functions we also must update several other functions to take a const u8 * pointer. Change-Id: I2ca7fd4e10c0c07ed2291db1ea41bf5987fc6474 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: drop is_vf and is_netdev fields in struct i40e_mac_filterJacob Keller
Originally the is_vf and is_netdev fields were added in order to distinguish between VF and netdev filters in a single VSI. However, it can be noted that we use separate VSI for SRIOV VFs and for netdev VSI. Thus, since a single VSI should only ever have one type of filter, we can simply remove the checks and remove the typing. In a similar fashion, we can note that the only remaining way to get multiple filters of a single type is through a debug command that was added to debugfs. This command is useless in practice, and results in causing bugs if we keep counter tracking but lose the is_vf and is_netdev protections as desired above. Since the only time we'd actually have a counter value besides 0 and 1 is through use of this debugfs hook, we can remove this unnecessary command, and the entire counter logic it required. We vastly simplify mac filters by removing (a) the distinction between VF and netdev filters (b) counting logic (c) the ability to add and remove filters bypassing the stack via debugfs Change-ID: Idf916dd2a1159b1188ddbab5bef6b85ea6bf27d9 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: Add missing \n to end of dev_err messageColin Ian King
Trival fix, dev_err message is missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28i40e: Clean up handling of msglevel flags and debug parameterAlexander Duyck
So the i40e driver had a really convoluted configuration for how to handle the debug flags contained in msg_level. Part of the issue is that the driver has its own 32 bit mask that it was using to track a separate set of debug features. From what I can tell it was trying to use the upper 4 bits to determine if the value was meant to represent a bit-mask or the numeric value provided by debug level. What this patch does is clean this up by compressing those 4 bits into bit 31, as a result we just have to perform a check against the value being negative to determine if we are looking at a debug level (positive), or a debug mask (negative). The debug level will populate the msg_level, and the debug mask will populate the debug_mask in the hardware struct. I added similar logic for ethtool. If the value being provided has bit 31 set we assume the value being provided is a debug mask, otherwise we assume it is a msg_enable mask. For displaying we only provide the msg_enable, and if debug_mask is in use we will print it to the dmesg log. Lastly I removed the debugfs interface. It is redundant with what we already have in ethtool and really doesn't belong anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e: Fix bit logic error in failure caseDavid Ertman
Patch a036244c0686 "i40e: Fix kernel panic on enable/disable LLDP" introduced an error in bit logic. Originally this bit manipulation was meant to clear two bits to indicate that DCB was not enabled or capable. An "&" was incorrectly used instead of an "|" bit operator to combine the two bitmasks into one. This also created a static checker error since the resultant code was a no-op. This patch fixes the error by using the correct bit-wise operator. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e/i40evf: Changed version from 1.6.19 to 1.6.21Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e: Removal of workaround for simple MAC address filter deletionFilip Sadowski
This is code refactoring. This patch removes the workaround which deleted a default MAC filter added by the firmware when the interface was brought up. This filter caused frames to pass disregarding the VLAN tagging. It used to be automatically applied after reset in pre-SRA FW versions. This workaround is not needed in production NICs and hence can be removed. Change-ID: I129fe1aae1f17b5a224c9b29a996d916aa1be1ec Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e: Fix for long link down notification timeCarolyn Wyborny
This patch fixes a problem where it could take a very long time (>100 msec) to print the link down notification. This problem is fixed by changing how often we update link info from fw, when link is down. Without this patch, it can take over 100msec to notify user link is down. Change-ID: Ib876eb30834c7080792becd13ee093b9cbb35d78 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e: Drop redundant Rx descriptor processing codeAlexander Duyck
This patch cleans up several pieces of redundant code in the Rx clean-up paths. The first bit is that hdr_addr and the status_err_len portions of the Rx descriptor represent the same value. As such there is no point in setting them to 0 before setting them to 0. I'm dropping the second spot where we are updating the value to 0 so that we only have 1 write for this value instead of 2. The second piece is the checking for the DD bit in the packet. We only need to check for a non-zero value for the status_err_len because if the device is done with the descriptor it will have written something back and the DD is just one piece of it. In addition I have moved the reading of the Rx descriptor bits related to rx_ptype down so that they are actually below the dma_rmb() call so that we are guaranteed that we don't have any funky 64b on 32b calls causing any ordering issues. Change-ID: I256e44a025d3c64a7224aaaec37c852bfcb1871b Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 02:46:31 +0000