summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2016-08-19i40e: Check client is open before calling client opsCatherine Sullivan
We were having a race between the completion of the client open and calls to the client ops so don't call a client op unless we are sure the client is open. Testing Hints: Load IWARP driver and make sure it works as expected. Change-Id: I741f4f2aa4fcbfdad3e40dabbbb1b005856c396b Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: use matching format identifiersHeinrich Schuchardt
i is defined as int but output as %u several times. Adjust the format identifiers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: Add support for HMC resource and profile for X722Carolyn Wyborny
This patch adds support for HMC resource and profile cmds for X722 firmware. Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: Fix byte ordering in ARP NS code for X722Carolyn Wyborny
This patch fixes byte ordering problems found when enabling this feature support. Without this patch, the feature will not work correctly. This patch fixes the definitions to have the correct byte order. Change-ID: Ic7489fbcbe2195df7be62ff5e359201b827cefe6 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: refactor tail_bump checkCarolyn Wyborny
This patch refactors tail bump check. Change-ID: Ide0e19171d67d90cb2b06b8dcd4fa791ae120160 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: use alloc_workqueue instead of create_singlethread_workqueueJacob Keller
Replace calls to create_singlethread_workqueue instead with alloc_workqueue as is style with other Intel drivers. This provides more control over workqueue creation, and allows explicit setting of the desired mode of operation. It also makes it more obvious that driver name constant is passed to a format "%s". Change-ID: I6192b44caf5140336cd54c5b350d51c73b541fdb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: use configured RSS key and lookup table in i40e_vsi_config_rssJacob Keller
A previous refactor added support to store user configuration for VSIs, so that extra VSIs such as for VMDq can use this information when configuring. Unfortunately the i40e_vsi_config_rss function was missed in this refactor, and the values were being ignored. Fix this by checking for the fields and using those instead of always using the default values. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: fix broken i40e_config_rss_aq functionJacob Keller
X722 hardware requires using the admin queue to configure RSS. This function was previously re-written in commit e69ff813af35 ("i40e: rework the functions to configure RSS with similar parameters"). However, the previous refactor did not work correctly for a few reasons (a) it does not check whether seed is NULL before using it, resulting in a NULL pointer dereference [ 402.954721] BUG: unable to handle kernel NULL pointer dereference at (null) [ 402.955568] IP: [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.956402] PGD ad610067 PUD accc0067 PMD 0 [ 402.957235] Oops: 0000 [#1] SMP [ 402.958064] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_filter ebtable_ broute bridge stp llc ebtable_nat ebtables ip6table_mangle ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv 6 ip6table_security ip6table_filter ip6_tables iptable_mangle iptable_raw iptable_nat nf_conntrack_ipv4_ nf_defrag_ipv4_ nf_nat_ip v4_ nf_nat nf_conntrack iptable_security intel_rapl i86_kg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_clMl crc32_ pclMl ghash_clMlni_intel iTCO_wdt iTCO_vendor_support shpchp sb_edac dcdbas pcspkr joydev ipmi_devintf wmi edac_core ipmi_ssif acpi_ad acpi_ower_meter ipmi_si ipmi_msghandler mei_me nfsd lpc_ich mei ioatdma tpm_tis auth_rpcgss tpm nfs_acl lockd grace s unrpc ifs nngag200 i2c_algo_bit drm_kms_helper ttm drm iigbe bnx2x i40e dca mdio ptp pps_core libcrc32c fjes crc32c_intel [ 402.965563] CPU: 22 PID: 2461 Conm: ethtool Not tainted 4.6.0-rc7_1.2-ABNidQ+ #20 [ 402.966719] Hardware name: Dell Inc. PowerEdge R720/0C4Y3R, BIOS 2.5.2 01/28/2015 [ 402.967862] task: ffff880219b51dc0 ti: ffff8800b3408000 task.ti: ffff8800b3408000 [ 402.969046] RIP: 0010:[<ffffffffa0090ccf>] [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.970339] RSP: 0018:ffff8800b340ba90 EFLAGS: 00010246 [ 402.971616] RAX: 0000000000000000 RBX: ffff88042ec14000 RCX: 0000000000000200 [ 402.972961] RDX: ffff880428eb9200 RSI: 0000000000000000 RDI: ffff88042ec14000 [ 402.974312] RBP: ffff8800b340baf8 R08: ffff880237ada8f0 R09: ffff880428eb9200 [ 402.975709] R10: ffff880428eb9200 R11: 0000000000000000 R12: ffff88042ec2e000 [ 402.977104] R13: ffff88042ec2e000 R14: ffff88042ec14000 R15: ffff88022ea00800 [ 402.978541] FS: 00007f84fd054700(0000) GS:ffff880237ac0000(0000) knlGS:0000000000000000 [ 402.980003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 402.981508] CR2: 0000000000000000 CR3: 000000003289e000 CR4: 00000000000406e0 [ 402.983028] Stack: [ 402.984578] 0000000002000200 0000000000000000 ffff88023ffeda68 ffff88023ffef000 [ 402.986187] 0000000000000268 ffff8800b340bbf8 ffff88023ffedd80 0000000088ce4f1d [ 402.987844] ffff88042ec14000 ffff88022ea00800 ffff88042ec2e000 ffff88042ec14000 [ 402.989509] Call Trace: [ 402.991200] [<ffffffffa009636f>] i40e_config_rss+0x11f/0x1c0 [i40e] [ 402.992924] [<ffffffffa00a1ae0>] i40e_set_rifh+0ic0/0x130 [i40e] [ 402.994684] [<ffffffff816d54b7>] ethtool_set_rifh+0x1f7/0x300 [ 402.996446] [<ffffffff8136d02b>] ? cred_has_capability+0io6b/0x100 [ 402.998203] [<ffffffff8136d102>] ? selinux_capable+0x12/0x20 [ 402.999968] [<ffffffff8136277b>] ? security_capable+0x4b/0x70 [ 403.001707] [<ffffffff816d6da3>] dev_ethtool+0x1423/0x2290 [ 403.003461] [<ffffffff816eab41>] dev_ioctl+0x191/0io630 [ 403.005186] [<ffffffff811cf80a>] ? lru_cache_add+0x3a/0i80 [ 403.006942] [<ffffffff817f2a8e>] ? _raw_spin_unlock+0ie/0x20 [ 403.008691] [<ffffffff816adb95>] sock_do_ioctl+0x45/0i50 [ 403.010421] [<ffffffff816ae229>] sock_ioctl+0x209/0x2d0 [ 403.012173] [<ffffffff81262194>] do_vfs_ioctl+0u4/0io6c0 [ 403.013911] [<ffffffff81262829>] SyS_ioctl+0x79/0x90 [ 403.015710] [<ffffffff817f2e72>] entry_SYSCALL_64_fastpath+0x1a/0u4 [ 403.017500] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 83 ec 40 4c 8b a7 e0 05 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 <48> 8b 06 41 0f b7 bc 24 f2 0f 00 00 48 89 45 9c 48 8b 46 08 48 [ 403.021454] RIP [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 403.023395] RSP <ffff8800b340ba90> [ 403.025271] CR2: 0000000000000000 [ 403.027169] ---[ end trace 64561b528cf61cf0 ]--- (b) it does not even bother to use the passed in *lut parameter which defines the requested lookup table. Instead it uses its own round robin table. Fix these issues by re-writing it to be similar to i40e_config_rss_reg and i40e_get_rss_aq. Fixes: e69ff813af35 ("i40e: rework the functions to configure RSS with similar parameters", 2015-10-21) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: move i40e_vsi_config_rss below i40e_get_rss_aqJacob Keller
Move this function below the two functions related to configuring RSS via the admin queue. This helps co-locate the two functions, and made it easier to spot a bug in the first i40e_config_rss_aq function as compared to the i40e_get_rss_aq function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Expose 'trust' flag to userspace via ndo_get_vf_config.Sridhar Samudrala
This enables ip -d l to indicate if trust is on or off for VFs. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: remove a stray unlockDan Carpenter
We shifted the locking around a bit but forgot to delete this unlock so now it can unlock twice. Fixes: cd3be169a5ff ('i40e: Move the mutex lock in i40e_client_unregister') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e/i40evf-Bump version from 1.6.11 to 1.6.12Bimmy Pujari
Signed-off-by: Bimmy Pujari <Bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Allow RSS Hash set with less than four parametersCarolyn Wyborny
This patch implements a feature change which allows using ethtool to set RSS hash opts using less than four parameters if desired. Change-ID: I0fbb91255d81e997c456697c21ac39cc9754821b Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: fix memory leakMitch Williams
When we allocate memory, we must free it. It's simple courtesy. Change-ID: Id007294096fb53344f1a8b9a0f78eddf9853c5d6 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: fix lookup table when RSS disabled/enabledAlan Brady
This patch fixes the bug which causes RSS to continue to work after being disabled. After disabling RSS, traffic would continue to be assigned to different queues instead of falling back to a single queue. Without this patch, attempting to disable RSS would not work as expected. This patch fixes the bug by clearing the lookup table used by RSS such that all traffic is assigned to a single queue. This patch also addresses the issue of reinstating the lookup table should RSS then be re-enabled. Change-ID: Ib20c7c6a7e9f1f772bb787370f8a8c664796b141 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Don't notify client of VF reset during VF creationAvinash Dayanand
VF goes through reset path during VF creation which happens to also have notification of VF reset to client. Adding conditional check to avoid wrongly notifying VF reset during VF creation. Also changing the call order of VF enable, calling it after VF creation rather than before. Change-ID: I96eabd99deae746a2f0fc465194c886f196178ce Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Force register writes to mitigate sync issues with iwarp VF driverAvinash Dayanand
This patch is a fix for the bug i.e. unable to create iwarp device in VF. This is a sync issue and the iwarp device open is called even before the PCI register writes are done. Forcing the PCI register writes to happen just before it exits the function. Change-ID: I60c6a2c709da89e845f2764cc50ce8b7373c8c44 Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: don't allow reduction of channels below active FD rulesJacob Keller
If a driver is unable to maintain all current user supplied settings from ethtool (or other sources), it is not ok for a user request to succeed and silently trample over previous configuration. To that end, if you change the number of channels, it must not be allowed to reduce the number of channels (queues) below the current flow director filter rules targets. In this case, return -EINVAL when a request to reduce the number of channels would do so. In addition log a warning to the kernel buffer explaining why we failed, and report the rules which prevent us from lowering the number of channels. Change-ID: If41464d63d7aab11cedf09e4f3aa1a69e21ffd88 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Fix static analysis tool warningDave Ertman
This patch fixes a problem where a static analysis tool generates a warning for "INVARIANT_CONDITION: Expression 'enabled_tc' used in the condition always yields the same result." Without this patch, the driver will not pass the static analysis tool checks without generating warnings. This patch fixes the problem by eliminating the irrelevant check and redundant assignment for the value of enabled_tc. Change-ID: Ia7d44cb050f507df7de333e96369d322e08bf408 Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: reset RX csum error stat with other pf statsCatherine Sullivan
When we are resetting the pf stats we should also reset the RX csum error stat. Change-ID: I7af5ee0ec81a10f6deee1a7b8c2082ea068ef620 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e/i40evf: Reset VLAN filter count when resettingCatherine Sullivan
When we do a reset, all the VLAN filters get added again. Therefore we also want to reset the VLAN count to 0 or we quickly run out of filters. Change-ID: I459f26851e22204dc8b8999928ad87cde8170119 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Fix a bug where a client close can be called before an open is completeAnjali Singhai Jain
The client->open call in this path was not protected with the client instance mutex, and hence the client->close can get initiated before the open completes. Change-Id: I0ed60c38868dd3f44966b6ed49a063d0e5b7edf5 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Use list_move instead of list_del/list_addWei Yongjun
Using list_move() instead of list_del() + list_add(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16i40e: check for and deal with non-contiguous TCsDave Ertman
The i40e driver was causing a kernel panic when non-contiguous Traffic Classes, or Traffic Classes not starting with TC0, were configured on a link partner switch. i40e does not support non-contiguous TCs. To fix this, the patch changes the logic when determining the total number of TCs enabled. Before, this would use the highest TC number enabled and assume that all TCs below it were also enabled. Now, we create a bitmask of enabled TCs and scan it to determine not only the number of TCs, but also if the set of enabled TCs starts at zero and is contiguous. If not, then DCB is disabled by only returning one TC. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-07-25Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-07-22 This series contains updates to i40e and i40evf. Heinrich Schuchardt found a possible null pointer being dereferenced in i40e_debug_aq(), fixed the issue by doing the variable assignment after we are sure the pointer is not null. Avinash fixed an issue when link was down, we were not showing the correct advertised link modes. Mitch cleans up a useless initializer since the variable is assigned right away. Refactors the receive filter handling to properly track filter adds and deletes so the driver will not lose filters during a reset and up/down cycles. Also added a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Catherine removes a device id which is not needed (or used). Moves a mutex lock since we need to lock the client list around the i40e_client_release() call to prevent the release from interrupting the client instances while they are being added. Joshua adds Hyper-V specific VF device ids. Amitoj Kaur Chawla cleans up a redundant memset() call before a memcpy(). Stefan Assmann adds the missing link advertise for some x710 NICs. Tushar Dave fixes and issue found on SPARC, where a PF reset clears MAC filters and if a platform-specific MAC address is used, the driver has to explicitly write default MAC address to MAC filters otherwise all incoming traffic destined to the default MAC address will be dropped after reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22i40e: Explicitly write platform-specific mac address after PF resetTushar Dave
i40e PF reset clears mac filters. If platform-specific mac address is used, driver has to explicitly write default mac address to mac filters otherwise all incoming traffic destined to default mac address will be dropped after reset. This issue was found on SPARC while toggling i40e ntuple via ethtool. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: add missing link advertise settingStefan Assmann
Adding the missing link advertise for some X710 NICs. This can be observed by simply calling ethtool on the interface. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported [...] With fix applied. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: 10000baseT/Full [...] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Move the mutex lock in i40e_client_unregisterCatherine Sullivan
We need to lock the client list around the i40e_client_release call to prevent the release from interrupting the client instances while they are being added. Change-Id: I99993f20179aaf8730207833e7d0869d2ccffa1d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove redundant memsetAmitoj Kaur Chawla
Remove redundant call to memset before a call to memcpy. The Coccinelle semantic patch used to make this change is as follows: @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf-bump version to 1.6.11Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: refactor Rx filter handlingMitch Williams
Properly track filter adds and deletes so the driver doesn't lose filters during resets and up/down cycles. Add a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Implement a simple state machine so the driver can track the status of each filter throughout its lifecycle. Properly manage the overflow promiscuous state for the each VSI, and provide a way for the driver to detect when to exit overflow promiscuous mode. Remove all possible default MAC filters that the firmware may have set up so that the driver can manage these correctly, particularly when VLANs come into play. Remove the LAA flag for filters; instead just send whatever we get through set_mac to the firmware as the LAA for wakeup purposes. Finally, add the state of each filter to debugfs output so we can see what's going on inside the driver's pointy little head. Change-ID: I97c5e366fac2254fa01eaff4f65c0af61dcf2e1f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove device ID 0x37D4Catherine Sullivan
This device ID is not needed, so take it out. Change-ID: I148d29f68a1f58b03980ecd83047a1b440f4f74d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf: remove useless initializerMitch Williams
This initializer isn't needed because the variable is assigned right away. Change-ID: I6ce3edb3f4e0364db248a7a0bcc62ca95c01d941 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Fix to show correct Advertised Link Modes when link is downAvinash Dayanand
When link is down, Advertised Link Modes was wrongly displaying full supported link modes instead of Advertised link mode. Added conditional checks in order to make sure correct Advertised link modes are displayed when the link is down. Change-ID: I8a61413f9ee174149c7a33157b5f0b0a8da9842d Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: avoid null pointer dereferenceHeinrich Schuchardt
In function i40e_debug_aq parameter desc is assumed to be possibly NULL. Do not dereference it before checking the value. Fixes: f905dd62be88 ("i40e/i40evf: add max buf len to aq debug print helper") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-14i40e: use valid online CPU on q_vector initializationGuilherme G. Piccoli
Currently, the q_vector initialization routine sets the affinity_mask of a q_vector based on v_idx value. Meaning a loop iterates on v_idx, which is an incremental value, and the cpumask is created based on this value. This is a problem in systems with multiple logical CPUs per core (like in SMT scenarios). If we disable some logical CPUs, by turning SMT off for example, we will end up with a sparse cpu_online_mask, i.e., only the first CPU in a core is online, and incremental filling in q_vector cpumask might lead to multiple offline CPUs being assigned to q_vectors. Example: if we have a system with 8 cores each one containing 8 logical CPUs (SMT == 8 in this case), we have 64 CPUs in total. But if SMT is disabled, only the 1st CPU in each core remains online, so the cpu_online_mask in this case would have only 8 bits set, in a sparse way. In general case, when SMT is off the cpu_online_mask has only C bits set: 0, 1*N, 2*N, ..., C*(N-1) where C == # of cores; N == # of logical CPUs per core. In our example, only bits 0, 8, 16, 24, 32, 40, 48, 56 would be set. This patch changes the way q_vector's affinity_mask is created: it iterates on v_idx, but consumes the CPU index from the cpu_online_mask instead of just using the v_idx incremental value. No functional changes were introduced. Signed-off-by: Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-14i40e: enable VSI broadcast promiscuous mode instead of adding broadcast filterKiran Patil
This patch sets VSI broadcast promiscuous mode during VSI add sequence and prevents adding MAC filter if specified MAC address is broadcast. Change-ID: Ia62251fca095bc449d0497fc44bec3a5a0136773 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-14i40e/i40evf: Fix i40e_rx_checksumAlexander Duyck
There are a couple of issues I found in i40e_rx_checksum while doing some recent testing. As a result I have found the Rx checksum logic is pretty much broken and returning that the checksum is valid for tunnels in cases where it is not. First the inner types are not the correct values to use to test for if a tunnel is present or not. In addition the inner protocol types are not a bitmask as such performing an OR of the values doesn't make sense. I have instead changed the code so that the inner protocol types are used to determine if we report CHECKSUM_UNNECESSARY or not. For anything that does not end in UDP, TCP, or SCTP it doesn't make much sense to report a checksum offload since it won't contain a checksum anyway. This leaves us with the need to set the csum_level based on some value. For that purpose I am using the tunnel_type field. If the tunnel type is GRENAT or greater then this means we have a GRE or UDP tunnel with an inner header. In the case of GRE or UDP we will have a possible checksum present so for this reason it should be safe to set the csum_level to 1 to indicate that we are reporting the state of the inner header. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: Don't notify client(s) for DCB changes on all VSIsNeerav Parikh
When LLDP/DCBX change happens the i40e driver code flow tried to notify the client(s) for each of the PF VSIs. This resulted into kernel panic on the first VSI that didn't have any netdev associated to it. The DCB change notification to the client(s) should be done only once for the PF/LAN VSI where the client(s) instances have been added to. Also, move the notification call after the PF driver has made changes related to the updated DCB configuration. Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Ronald J Bynoe <ronald.j.bynoe@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: Fix errors resulted while turning off TSOTushar Dave
On systems with 128 CPUs, turning off TSO results in errors, i40e 0000:03:00.0: failed to get tracking for 1 vectors for VSI 400, err=-12 i40e 0000:03:00.0: Couldn't create FDir VSI i40e 0000:03:00.0: i40e_ptp_init: PTP not supported on eth0 i40e 0000:03:00.0: couldn't add VEB, err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOENT i40e 0000:03:00.0: rebuild of switch failed: -1, will try to set up simple PF connection i40e 0000:03:00.0 eth0: adding 00:10:e0:8a:24:b6 vid=0 Enabling FD_SB without checking availability of MSI-X vector is the root cause. This change adds necessary check. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e/i40evf: Bump version from 1.5.16 to 1.6.4Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: add VSI info to macaddr messagesShannon Nelson
Since the macaddr add and delete happens asynchronously, error messages don't easily get associated to the actual request. Here we add a bit of information to the error messages to help determine the source of the error. Change-ID: Id2d6df5287141c3579677d72d8bd21122823d79f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: set default VSI without a resetMitch Williams
Remove the need for a reset when the device enters limited promiscuous mode. This was causing heartburn for people who were using VFs and bridging, since this would require all of the VFs to undergo a reset each time the PF changed its promiscuity. Change-ID: I0a83495c5e4d68112bbc7a7a076d20fa8dd3b61c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: Fix RSS to not be limited by the number of CPUsCatherine Sullivan
Limiting qcount to pf->num_lan_msix, effectively limits the RSS queues to only use the number of CPUs, and ignore all other queues. We don't want to do this. If the user has changed the RSS settings to use more queues then CPUS, we want to trust they know what they are doing and let them. More importantly, if we tell them that is what we did, we want to actually do it and allow traffic into all of the queues we have allocated. This does not change the default setting to initially allocate only the number of CPUS of queue pairs. Change-ID: Ie941a96e806e4bcd016addb4e17affb46770ada5 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: Removing unnecessary code which caused supported link mode bugAvinash Dayanand
Removing this code which wasn't allowing 100BaseT to show up in the supported link modes for 10GBaseT PHYs. Change-ID: Iada2eafa7ef6b4bac9a2a1380ff533ae5de51e1d Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: fix missing DA cable checkSerey Kong
When a Direct Attach (DA) cable is used, if the i40e_set_settings function is called it would return an error. Add the DA type so the function won't fail. Change-ID: I2b802f27a5d91cfefa72fd1f852acb4d74647a8e Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: Save PCI state before suspendGreg Rose
The i40e_suspend() function was failing to save PCI state and this would result in a kernel stack trace from a WARN_ONCE in the pci_legacy_suspend() function. Add a call to pci_save_state() to fix that problem. Change-ID: I4736e62bb660966bd208cc8af617a14cb07fc4bd Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e: Clean up MSIX IRQs before suspendGreg Rose
The i40e_suspend() function calls another function that preps the device for the power save and resume by freeing all the Tx/Rx resources and interrupts but that function does not free the "other" causes interrupt vector and IRQ. It also fails to call synchronize_irq() before freeing the IRQ vectors. This sometimes may result in some AER errors on those systems with that PCIe error reporting feature enabled. Call synchronize_irq() before freeing IRQ vectors and explicitly free the other causes interrupt resources and shut down that MSIX interrupt. Change-ID: Ib88e4536756518a352446da0232189716618ad81 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 23:47:23 +0000