summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2014-06-08i40e/i40evf: Clean up a few thingsAkeem G Abodunrin
1. There is no ixgbe_watchdog_task function in the driver, so change the comment to the correct function name, i40e_watchdog_subtask. 2. Remove num_msix_entries from interrupt set_up routine because it is never used. 3. Remove some TBD comments that are not needed. Change-ID: I37697a04007074b797f85fd83d626672e4df1ad1 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Fix code to accommodate i40e_register.h changesAnjali Singhai Jain
Remove use of registers no longer supported. Change-ID: I9d27399091cea78a926489d94f958edd762f5a20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix rx descriptor statusJesse Brandeburg
As reported by Eric Dumazet, the driver is not masking the right bits in the receive descriptor before it starts checking them. This patch extends the mask to allow for the right bits to be checked, and fixes the issue permanently via a define. CC: Eric Dumazet <eric.dumazet@gmail.com> Change-ID: I3274f7619057a950f468143e6d7e11b129f54655 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: Bump build versionCatherine Sullivan
Bump i40e to 0.4.3 and i40evf to 0.9.27. Change-ID: I4141e9f8615bdcfa3b1b5ecbc2ac62603a03b7ad Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: remove irqs only when they are set upShannon Nelson
Use an extra state variable to keep track of when the IRQs are fully set up. This keeps us from trying to unhook IRQs that already were left unhooked in a failed reset recovery, e.g. when firmware is broken. Change-ID: I073eb081e4ef8aedcbdf1ee0717c0ed64fa172f2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: don't remove HMC that doesn't existShannon Nelson
If a reset recovery failed (e.g. firmware is broken), the HMC space won't get set up. We don't need to try to delete it if it didn't get set up. This stops some needless error messages when we already know we need to just tear things down. Change-ID: Iac600481765e20b136052b43a544e55d7870268b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: print full link messageJesse Brandeburg
The i40e driver should print link messages like all the other Intel Ethernet drivers. Change-ID: Ia88bdb96794e17a3962fcea94db176de01f921f7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add xcast stats for portShannon Nelson
Add the missing unicast, multicast, and broadcast stats for the port. Change-ID: Ifc366d7b7745f70eaac9d00eeb0694eb9ec076a9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add vsi x-cast statsShannon Nelson
Add VSI HW stats for unicast, multicast, and broadcast for Rx and Tx. Stop printing the netdev multicast value because it doesn't include Tx and would be confusing. Change-ID: I08278b6657e7c838fd29a4a1f305f78fe1b150be Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: increase reset wait timeShannon Nelson
The wait time was originally too optimistic and the resets were failing after EMPR. This increases the loop count to wait considerably longer. This won't delay the actual wait longer than really needed, just allows us to poll more times as needed. Change-ID: If7b96f55cc25b8d06cbbe8665259d250188c53d7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: add Tx pre queue disable functionMatt Jared
Add a function which indicates our intention to enable or disable a particular Tx queue. Also add a function to notify the device's Tx unit that we're about to enable or disable a Tx queue. Change-ID: I6adf3cbb5bb3e3c984d1ec969e06577c19ef296d Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: check AQ register for valid dataKamil Krawczyk
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: print message for pre-production hardwareJesse Brandeburg
The driver and hardware are not expected to work correctly with revision_id 0 hardware. Don't prevent the user from using it, but be sure to print a warning. Change-ID: I3712d34752bfad458078a5f35dfd0aa0ae9fd20e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add VEB stats to ethtoolShannon Nelson
Print the VEB statistics in the ethtool stats output. Change-ID: Ic93d4c3922345c43e4cfd7f7e7a906844dd2f49f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: set lan_veb indexShannon Nelson
When the VEB is created for the basic LAN device and its VSIs, we need to set the tracking lan_veb index for later use. Change-ID: I66bb74993bbda3621ca557437cb4b3517f9b315b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: add missing VSI statisticsShannon Nelson
Add a couple more statistics that the hardware offers but aren't part of the standard netdev stats. Change-ID: I201db2898f2c284aee3d9631470bc5edd349e9a5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: remove rx_errors and rx_missedShannon Nelson
The rx_errors (GLV_REPC) and rx_missed (GLV_RMPC) were removed from the chip design. Change-ID: Ifdeb69c90feac64ec95c36d3d32c75e3a06de3b7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: refactor stats collectionShannon Nelson
Pull the PF stat collection out of the VSI collection routine, and add a unifying stats update routine to call the various stat collection routines. Change-ID: I224192455bb3a6e5dc0a426935e67dffc123e306 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: refactor send versionJesse Brandeburg
This change moves some common code in two places into a small helper function, and corrects a bug in one of the two places in the process. Change-ID: If3bba7152b240f13a7881eb0e8a781655fa66ce7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: VEB structure added, GTIME macro updateKamil Krawczyk
Structure for VEB context added. Update macro for transition from ms to GTIME (us) time units. Change-ID: Ib3a19587b4cf355348655df8f60c6f37bb1497a3 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: notify VF of all types of resetsMitch Williams
Currently, the PF driver only notifies the VFs for PF reset events. Instead, notify the VFs for all types of resets, so they can attempt a graceful reinit. Change-ID: I03eb7afde25727198ef620f8b4e78bb667a11370 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: clamp jumbo frame sizeJesse Brandeburg
The driver was allowing the user to set larger size MTU than the hardware was being configured to support. The driver was already using VLAN_HLEN when setting the hardware max receivable frame size, so just add it to the netdev MTU set entry point as well. Change-ID: Ie20e2a35d04f8c411253e255bea79ca69aaeaea3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: remove unused RX_LRO defineJesse Brandeburg
Remove unused defines and macros for RX_LRO. Change-ID: I8ca6715edfa62b56837417a1c4ff68c2345dab6e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: remove check for large bufferKamil Krawczyk
We introduced this check in case this structure changed in the future, the AQ definition is now mature enough that this check is no longer necessary. Change-ID: Ic66321d0a08557dc9d8cb84029185352cb534330 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: Rework register diagnosticKamil Krawczyk
Register range, being subject to register diagnostic, can vary among different NVMs. We will try to identify the full range and use it for a register test. This is needed to avoid false test results. If we fail to define the proper register range we will test only the first register from that group. Change-ID: Ieee7173c719733b61d3733177a94dc557eb7b3fd Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: don't use OR to check a valueJesse Brandeburg
A couple of FD checks ended up using bitwise OR to check a value, which ends up always being evaluated to true. This should fix the issue. Thanks to DaveJ for noticing and reporting the issue! CC: Dave Jones <davej@redhat.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: relax the firmware API version checkShannon Nelson
As long as the Firmware isn't reporting a higher API major version number than what the driver knows about, the driver does not need to worry as much about greater minor numbers. The API changes minor numbers when things get added to the API, but no existing structs or calls are changed. The driver has the option of warning that the minor numbers don't match. This will allow a little more flexibility in handling newer NICs and NVMs in the field. Change-ID: I5302acd2d147a2992328991ee7223b2ff39c8741 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40: disable FCoE for MFP modesVasu Dev
Currently FCoE is not supported with MFP modes, so this patch makes sure it is disabled. It is disabled by overriding HW FCoE capability, so that later it can be re-enabled by just the SW upgrade. Change-ID: I1c0bae5c099b209f56b88bda360031a8565e43e8 Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-By: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: add clear_pxe AdminQ requestShannon Nelson
Add the clear_pxe AdminQ API call. Change-ID: Ia770ff3404971bb3889b53a39c3a7bfaf3f4d399 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Clear recovery pending, if reset failedAkeem G Abodunrin
If pf_reset failed, it becomes necessary to clear recovery pending bit, instead of falling through the setup process. Change-ID: Ic1611e6a32741fe3a2782ec7be173cb65e7492ed Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Change type to u32 to avoid sparse errorGreg Rose
tx_lpi_status and rx_lpi_status are declared as bool but then used in sizeof operations in the CORE driver code. Make them u32 to make sparse be quiet. Change-ID: Iad6daeb1c7149e61ece242acd18c64b320c246a3 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: remove storm controlJesse Brandeburg
The storm control features are not part of the hardware and mistakenly were left in the code. Remove them as they are not needed any more. Change-ID: I6e9277c8da2c52e69348a657bae25271449c2099 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Use the new i40e_get_fd_cnt_all function in other placesAnjali Singhai Jain
We have a function to calculate this, so update the code to use the function. Change-ID: Ia345b6fe6ec7f0b2dcf1199471b0d0f959ad3908 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Report cmd->data in ETHTOOL_GRXCLSRLCNT instead of ETHTOOL_GRXCLSRULEAnjali Singhai Jain
Based on review feedback from upstream cmd->data is not defined in ETHTOOL_GRXCLSRULE but needs to be reported in ETHTOOL_GRXCLSRLCNT. Also use a helper function to calculate the total filter count. Change-ID: Iaacbf729527b73290c4fdad837b379b44fd7dd20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Remove reserved PCTYPE definesKevin Scott
Patch to remove PCTYPE definitions which are now reserved. Change-ID: I66c1c16a45a16f4894b2983101ab2a48ce03f1f4 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Tx/Rx rings declarationAkeem G Abodunrin
This patch changes the declaration of Tx/Rx rings inside several loops. It eliminates declaring the same rings every time for the duration of the loop, instead declaring them once before the loop. Change-ID: I59dea54276f18c47dca522f520c18f65fe42a15d Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: tweak Tx rate params and de-magic-ifyMitch Williams
In order for the VF to achieve its programmed Tx rate, we need to set the max credits value to 4. While we're at it, get rid of some magic numbers. Change-ID: I4f17b4d3a90f1e069bdd134a543f0aa22feac3a9 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: don't round Tx rate down to 0Mitch Williams
Because the hardware configures VF Tx rates in increments of 50 Mbps, values smaller than that would be rounded down to 0, which was interpreted as no limit at all. Rather than do this, we round up to 50 Mbps and notify the user. Change-ID: I5275848233fe7514cf93e11323661c68f4c38737 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: enable descriptor prefetch for VFsMitch Williams
As recommended by the hardware guys, enable descriptor prefetch for rings belonging to VFs. This matches a change already made for ring belonging to the PF. Change-ID: Idcc4dc7064bc9144ea81f5701ad07b7ecd11ba49 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Update check for AQ alivenessKevin Scott
Update the i40e_check_asq_alive check to ensure that the len register offset is non-zero, indicating that SW has initialized the AQ. Change-ID: I9c2e804788b4775bef9c7e80954ab004e6bdb306 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to igb, igbvf, ixgbe, i40e and i40evf. Jacob provides eight patches to cleanup the ixgbe driver to resolve various checkpatch.pl warnings/errors as well as minor coding style issues. Stephen Hemminger and I provide simple cleanups of void functions which had useless return statements at the end of the function which are not needed. v2: Dropped Emil's patch "ixgbe: fix the detection of SFP+ capable interfaces" while I wait for his updated patch to be validated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate ↵Sucheta Chakraborty
through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23i40e,igb,ixgbe: remove usless return statementsStephen Hemminger
Remove cases where useless bare return is left at end of function. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: fix passing wrong error code to i40e_open()Jean Sacren
The commit 6c167f582ea9 ("i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()") introduced a new function i40e_vsi_open() with the regression by a typo. Due to the commit, the wrong error code would be passed to i40e_open(). Fix this error in i40e_vsi_open() by turning the macro into a negative value so that i40e_open() could return the pertinent error code correctly. Fixes: 6c167f582ea9 ("i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()") Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: Check PCI_IOV config to avoid compile errorGreg Rose
The call to i40e_alloc_vfs needs to be wrapped in CONFIG_PCI_IOV because the function itself is wrapped in the same conditional compile block. Change-ID: I663c5f1b85e5cfba0b36da8966f7db1a034f408b Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: remove Tx work for ptpJesse Brandeburg
The previous removal of the PTP Tx work functionality was incomplete as noted by Jake Keller. This removal allows us to rely on the Tx timesync interrupt. CC: Jacob Keller <jacob.e.keller@intel.com> Change-ID: Id4faaf275a3688053ebbf07bef08072f9fd11aa9 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: Don't disable SR-IOV when VFs are assignedMitch Williams
When VFs are assigned to active VMs and we disable SR-IOV out from under them, bad things happen. Currently, the VM does not crash, but the VFs lose all resources and have no way to get them back. Add an additional check for when the user is disabling through sysfs, and add a comment to clarify why we check twice. Change-ID: Icad78eef516e4e1e4a87874d59132bc3baa058d4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: remove hardcode of stats struct size in ethtoolShannon Nelson
Base the queue stats length on the queue stats struct rather than assuming it is 2 fields. This is in prep for adding data fields which are configuration dependent. Change-ID: I937f471f389d2e0f8cec733960c5d9a06b14f3ec Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e/i40evf: control auto ITR through ethtoolMitch Williams
For all of our supported kernels, ethtool allows us to directly control adaptive ITR instead of just faking it with an ITR value. Support this capability so that user knows explicitly when ITR is being controlled dynamically. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: Iae6b79c5db767a63d22ecd9a9c24acaff02a096e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e/i40evf: set proper default for ITR registersMitch Williams
Ethtool consistently reports 0 values for our ITR settings because we never actually set them. Fix this by setting the default values to the specified default values. Change-ID: I2832406a66f7140f2b1230945d6ff6cbf77467c8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 11:45:56 +0000