summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2014-03-21i40e/i40evf: Add EEE LPI statsAnjali Singhai Jain
Add 4 new stats to keep track of EEE LPI (Low Power Idle) state. Change-ID: Id6316619bb0559789770288b694a54d17f8fac5c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e/i40evf: Bump build versionsCatherine Sullivan
Bump to version 0.3.36 for i40e and 0.9.16 for i40evf. Change-ID: I7b4ff97b32d2825181803c03c316381a7608a618 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e: potential array underflow in i40e_vc_process_vf_msg()Dan Carpenter
If "vf_id" is smaller than hw->func_caps.vf_base_id then it leads to an array underflow of the pf->vf[] array. This is unlikely to happen unless the hardware is bad, but it's a small change and it silences a static checker warning. Fixes: 7efa84b7abc1 ('i40e: support VFs on PFs other than 0') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e/i40evf: reduce context descriptorsJesse Brandeburg
We don't need context descriptors for every packet, only tso or timesync. This fixes a bug in the driver where it would always add a context even if all the passed in values to the context descriptor function were 0/default values. Change-ID: I0101d2b893380707b5c2de61aab3e16d4310e9a1 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e/i40evf: enable hardware feature head write backJesse Brandeburg
The hardware supports a feature to avoid updating the descriptor ring by marking each descriptor with a DD bit, and instead writes a memory location with an update to where the driver should clean up to. Enable this feature. Change-ID: I5da4e0681f0b581a6401c950a81808792267fe57 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()Elizabeth Kappler
This patch cleans up and moves a portion of i40e_open to i40e_vsi_open, in order to have a shorter vsi_open function that does only that. Change-ID: I1c418dda94dcfc0eb7d4386a70c330692ef5ecc9 Signed-off-by: Elizabeth Kappler <elizabeth.m.kappler@intel.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e: Patch to enable Ethtool/netdev feature flag for NTUPLE controlAnjali Singhai Jain
This enables option '-k/-K' in ethtool for NTUPLE control. NTUPLE control requires a reset, to take effect. When the feature is turned off, the SW list of stored FD SB filters gets cleaned up. Change-ID: I9d564b67a10d4afa11de3b320d601c3d2e6edc1f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e: support VF link state ndoMitch Williams
This netdev op allows the PF driver to control the virtual link state of the VF devices. This can be used to deny naughty VF drivers access to the wire, or to allow VFs (regardless of temperament) to communicate with each other over the device's internal switch even though external link is down. Add the actual ndo function, and modify vc_notify_link_state to check the link status of each VF before sending a message in the case when physical link changes state. Change-ID: Ib5a6924da78c540789f21d26b5e8086d71c29384 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-18net/i40e: Avoid double setting of NETIF_F_SG for the HW encapsulation ↵Or Gerlitz
feature mask The networking core does it for the driver during registration time. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14i40e: Don't receive packets when the napi budget == 0Eric W. Biederman
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14i40e/i40evf: Use dma_set_mask_and_coherentMitch Williams
In Linux 3.13, dma_set_mask_and_coherent was introduced, and we have been encouraged to use it. It simplifies the DMA mapping code a bit as well. Change-ID: I66e340245af7d0dedfa8b40fec1f5e352754432e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e/i40evf: Use correct number of VF vectorsMitch Williams
Now that the 2.4 firmware reports the correct number of MSI-X vectors, use this value correctly when communicating with the VF, and when setting up the interrupt linked list. The PF has always reported the correct number of MSI-X vectors, so we should never increment the value in the vf driver. Change-ID: Ifeefc631c321390192219ce2af9ada6180c1492f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: Let MDD events be handled by MDD handlerAnjali Singhai Jain
We have a separate handler for MDD events, a generic reset is not required. Change-ID: I77858e2d479e4e65c52aede67109464649ea0253 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: Bug fix for FDIR replay logicAnjali Singhai Jain
The FDIR replay logic was being run a little too soon (before the queues were enabled) and hence the tail bump was not effective till a later transaction happened on the queue. Change-ID: Icfd7cd2e79fc3cae3cbd3f703a2b3a148b4e7bf6 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: Add code to handle FD table full conditionAnjali Singhai Jain
Add code to enforce the following policy: - If the HW reports filter programming error, we check if it's due to a full table. - If so, we go ahead and turn off new rule addition for ATR and then SB in that order. - We monitor the programmed filter count, if enough room is created due to filter deletion/reset, we then re-enable SB and ATR new rule addition. Change-ID: I69d24b29e5c45bc4fa861258e11c2fa7b8868748 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: Define a new state variable to keep track of feature auto disableAnjali Singhai Jain
This variable is a bit mask. It is needed to differentiate between user enforced feature disables and auto disable of features due to HW resource limitations. Change-ID: Ib4b4f6ae1bb2668c12e482d2555100bc8ad713d5 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: Fix function commentsAkeem G Abodunrin
Correct misleading function comment. Change-ID: I3f66cff5cc00250a285756b6500a58fad8eba4b5 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: simplified init stringJesse Brandeburg
In a similar way to how ixgbe works, print a short one-line string showing what features and number of queues the driver and hardware has enabled at probe time. Example (wrapped for the commit message): i40e 0000:06:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 32 FDir RSS ATR NTUPLE DCB Change-ID: I177bf7f93d1c4c921529c92fdf66e614f6b4f755 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: cleanup stringsJesse Brandeburg
This patch cleans up the strings that the driver prints during normal operation and moves many strings into dev_dbg. It also cleans up strings printed during reset. Change-ID: I1835cc4e3c3b22596182b683284e6bb87eac61b2 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: make string references to q be queueJesse Brandeburg
This cleans up strings for consistency, q is replaced with queue. Change-ID: Ia5f9dfae9af261f4c24485854264e02363729cf3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e/i40evf: Some flow director HW definition fixesAnjali Singhai Jain
1) Fix a name of the error bit to correctly indicate the error. 2) Added a fd_id field in the 32 byte desc at the place(qw0) where it gets reported in the programming error desc WB. In a normal data desc the fd_id field is reported in qw3. Change-ID: Ide9a24bff7273da5889c36635d629bc3b5212010 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: Fix a bug in the update logic for FDIR SB filter.Anjali Singhai Jain
The update filter logic was causing a kernel panic in the original code. We need to compare the input set to decide whether or not to delete a filter since we do not have a hash stored. This new design helps fix the issue. Change-ID: I2462b108e58ca4833312804cda730b4660cc18c9 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: delete netdev after deleting napi and vectorsShannon Nelson
We've been deleting the netdev before getting around to deleting the napi structs. Unfortunately, we then didn't delete the napi structs because we have a check for netdev, thus we were leaving garbage around in the system. Change-ID: Ife540176f6c9f801147495b3f2d2ac2e61ddcc58 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e/i40evf: Bump pf&vf build versionsCatherine Sullivan
Bump i40e to 0.3.34 and i40evf to 0.9.14. Change-ID: I6b3fb8ccf55b128d2baa4bdc20d3911ec81d4a5b Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e/i40evf: carefully fill tx ringJesse Brandeburg
We need to make sure that we stay away from the cache line where the DD bit (done) may be getting written back for the transmit ring since the hardware may be writing the whole cache line for a partial update. Change-ID: Id0b6dfc01f654def6a2a021af185803be1915d7e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: fix nvm version and remove firmware reportJesse Brandeburg
The driver needs to use the format that the current NVM uses when printing the version of the NVM. It should remain this way from now on forward. The driver was reporting when firmware was less than an expected version number, but this is not a requirement for the product and we print the firmware number at init and in ethtool -i output. Just remove the print. Change-ID: Ide0b856cd454ebf867610ef9a0d639bb358a4a60 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: Fix static checker warningNeerav Parikh
This patch fixes the following static checker warning: drivers/net/ethernet/intel/i40e/i40e_dcb.c:342 i40e_lldp_to_dcb_config() warn: 'tlv' can't be NULL. Exit criteria from the while loop is encountering LLDP END LV or if the TLV length goes beyond the buffer length. Change-ID: I7548b16db90230ec2ba0fa791b0343ca8b7dd5bb Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Tested-By: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: Remove a redundant filter additionAnjali Singhai Jain
Remove a redundant filter addition to stop FW complaints about a redundant filter removal. Change-ID: I22bef6b682bd8d43432557e6e2b3e73ffb27b985 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: count timeout eventsJesse Brandeburg
The ethtool -S statistics should have a counter for tx timeouts in order to better help inform the masses. Change-ID: Ice4b20ed4a151509f366719ab105be49c9e7b2b4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: Remove a FW workaround for Number of MSIX vectorsAnjali Singhai Jain
The Number of MSIX vectors being reported is correct and hence we need a check to do the right thing for FWs before and after. Change-ID: I50902d1c848adcb960ea49ac73f7865ca871a1c3 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: clean up comment styleShannon Nelson
Lots of trivial changes to remove double spaces in function headers, unnecessary periods in short comments, and adjust the English usage here and there. No actual code was harmed in the making of this patch. Change-ID: I6e756c500756945e81a61ffb10221753eb7923ea Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e/i40evf: i40e implementation for skb_set_hashJesse Brandeburg
Original comment from Tom Herbert <therbert@google.com> Drivers should call skb_set_hash to set the hash and its type in an skbuff. This patch builds upon Tom's original implementation and adds the L4 type return when we know it is an L4 hash. This requires use of the ptype decoder ring, so enable it. Change-ID: I2f9fa86d1a6add58cff13386f7f4238b1abcc468 CC: Tom Herbert <therbert@google.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: Prevent overflow due to kzallocAkeem G Abodunrin
To prevent the possibility of overflow due multiplication of number and size use kcalloc instead of kzalloc. Change-ID: Ibe4d81ed7d9738d3bbe66ee4844ff9be817e8080 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: Flow Director sideband accountingJoseph Gasparakis
This patch completes implementation of the ethtool ntuple rule management interface. It adds the get, update and delete interface reset. Change-ID: Ida7f481d9ee4e405ed91340b858eabb18a52fdb5 Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-02-21i40e and i40evf: Bump driver versionsCatherine Sullivan
Update the driver versions. Change-ID: I3fe23024d17da0e614ce126edb365bb2c428d482 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: Change MSIX to MSI-XCatherine Sullivan
Fix inconsistent use of MSIX and MSI-X in messages. Change-ID: Iae9ffb42819677c34544719044ed77632e06147d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: tighten up ring enable/disable flowMitch Williams
Change the do/while to a for loop, so we don't hit the delay each time, even when the register is ready for action. Don't bother to set or clear the QENA_STAT bit as it is read-only. Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: remove unnecessary delayMitch Williams
Ain't nothing gonna break my stride, nobody's gonna slow me down, oh no. I got to keep on moving. This was originally put in for debugging just-in-case purposes and never removed. Change-ID: Ic12c2e179c3923f54e6ba0a9e4ab05d25c3bab29 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18i40e: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: don't handle VF reset on unloadMitch Williams
Set the DOWN flag before attempting to disable VFs when unloading the driver. Also, don't attempt to reset the VFs when the driver is unloading, because the switch configuration will fail. This fixes a panic on unload when VFs are enabled. Change-ID: I25a6567e89c9687145f510ff4f630932412c5c5d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: enable extant VFsMitch Williams
If VFs are present when the driver loads, then set up some resources so they can function. Change-ID: I485916a811609a9990ce663d06dc645f625b07ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: reset VFs after PF resetMitch Williams
Reset all of the VFs after a PF reset, so that they are in a known state, and the VF driver can detect the reset and reinit itself. Change-ID: I93c5b3a0f8b1371d0da078f92de948b9d3a6413f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: set VF state to active when reset is completeMitch Williams
Without this, the VF can never communicate with the PF after a VF reset. Change-ID: I8d10f1d0d0638d50d39f0aff263422e05d83ad83 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: remove dead codeMitch Williams
This looks like a cut and paste error. The code makes no sense where it is, and accomplishes nothing. Since we've removed the goto, we can also get rid of the extraneous brackets. Change-ID: I9315e3eafeee0a5713c94b0dc57b58b60a849124 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: Setting i40e_down bit for tx_timeoutAkeem G Abodunrin
If tx_timeout recovery failed, then it becomes necessary to set i40e_down bit before actually shutdown the connection. Change-ID: Iaac81df0e302116571827aa0cff450697fbb7fa3 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40evf: clean up memsetsMitch Williams
As politely pointed out by Dave Miller, calls to memset do not need a void pointer cast. Additionally, it is preferred to use sizeof(*the actual object) instead of sizeof(type). Change-ID: Id6a02429b7040111531f3865ea03fbe619167cb3 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: bump driver versionJesse Brandeburg
Update the driver version to 0.3.31-k. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13i40e: spelling errorJesse Brandeburg
Fix a spelling error, s/extention/extension/. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27i40e: Add missing braces to i40e_dcb_need_reconfig()Dave Jones
Indentation mismatch spotted with Coverity. Introduced in 4e3b35b044ea ("i40e: add DCB and DCBNL support") Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:38:55 +0000