summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2020-08-26net: Take common prefetch code structure into a functionTariq Toukan
Many device drivers use the same prefetch code structure to deal with small L1 cacheline size. Take this code into a function and call it from the drivers. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14i40e: Fix crash during removing i40e driverGrzegorz Szczurek
Fix the reason of crashing system by add waiting time to finish reset recovery process before starting remove driver procedure. Now VSI is releasing if VSI is not in reset recovery mode. Without this fix it was possible to start remove driver if other processing command need reset recovery procedure which resulted in null pointer dereference. VSI used by the ethtool process has been cleared by remove driver process. [ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 6731.508668] #PF: supervisor read access in kernel mode [ 6731.508670] #PF: error_code(0x0000) - not-present page [ 6731.508671] PGD 0 P4D 0 [ 6731.508674] Oops: 0000 [#1] SMP PTI [ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017 [ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e] [ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83 [ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246 [ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007 [ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780 [ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004 [ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000 [ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000 [ 6731.508708] FS: 00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000 [ 6731.508710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0 [ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6731.508715] Call Trace: [ 6731.508734] i40e_vsi_close+0x84/0x90 [i40e] [ 6731.508742] i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e] [ 6731.508749] i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e] [ 6731.508757] i40e_prep_for_reset+0x59/0x130 [i40e] [ 6731.508765] i40e_reconfig_rss_queues+0x5a/0x120 [i40e] [ 6731.508774] i40e_set_channels+0xda/0x170 [i40e] [ 6731.508778] ethtool_set_channels+0xe9/0x150 [ 6731.508781] dev_ethtool+0x1b94/0x2920 [ 6731.508805] dev_ioctl+0xc2/0x590 [ 6731.508811] sock_do_ioctl+0xae/0x150 [ 6731.508813] sock_ioctl+0x34f/0x3c0 [ 6731.508821] ksys_ioctl+0x98/0xb0 [ 6731.508828] __x64_sys_ioctl+0x1a/0x20 [ 6731.508831] do_syscall_64+0x57/0x1c0 [ 6731.508835] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4b8164467b85 ("i40e: Add common function for finding VSI by type") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-08-14i40e: Set RX_ONLY mode for unicast promiscuous on VLANPrzemyslaw Patynowski
Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs. Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN. Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support") Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-07-07PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'Luc Van Oostenryck
The method struct pci_error_handlers.error_detected() is defined and documented as taking an 'enum pci_channel_state' for the second argument, but most drivers use 'pci_channel_state_t' instead. This 'pci_channel_state_t' is not a typedef for the enum but a typedef for a bitwise type in order to have better/stricter typechecking. Consolidate everything by using 'pci_channel_state_t' in the method's definition, in the related helpers and in the drivers. Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state' with an anonymous 'enum'. Note: Currently, from a typechecking point of view this patch changes nothing because only the constants defined by the enum are bitwise, not the enum itself (sparse doesn't have the notion of 'bitwise enum'). This may change in some not too far future, hence the patch. [bhelgaas: squash in https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.com https://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com] Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-01i40e: introduce new dump desc XDP commandCiara Loftus
Interfaces already exist for dumping Rx and Tx descriptor information. Introduce another for doing the same for XDP descriptors. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: add XDP ring statistics to dump VSI debug outputCiara Loftus
Prior to this, only the Rx and Tx ring statistics were dumped. The XDP ring statistics are now dumped as well. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: add XDP ring statistics to VSI statsCiara Loftus
Prior to this, only Rx and Tx ring statistics were accounted for. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: move check of full Tx ring to outside of send loopMagnus Karlsson
Move the check if the HW Tx ring is full to outside the send loop. Currently it is checked for every single descriptor that we send. Instead, tell the send loop to only process a maximum number of packets equal to the number of available slots in the Tx ring. This way, we can remove the check inside the send loop to and gain some performance. Suggested-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: eliminate division in napi_poll data pathMagnus Karlsson
Eliminate a division in the napi_poll data path. This division is executed even though it is only needed in the rare case when there are not enough interrupt lines so they have to be shared between queue pairs. Instead, just test for this case and only execute the division if needed. The code has been lifted from the ice driver. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: optimize AF_XDP Tx completion pathMagnus Karlsson
Improve the performance of the AF_XDP zero-copy Tx completion path. When there are no XDP buffers being sent using XDP_TX or XDP_REDIRECT, we do not have go through the SW ring to clean up any entries since the AF_XDP path does not use these. In these cases, just fast forward the next-to-use counter and skip going through the SW ring. The limit on the maximum number of entries to complete is also removed since the algorithm is now O(1). To simplify the code path, the maximum number of entries to complete for the XDP path is therefore also increased from 256 to 512 (the default number of Tx HW descriptors). This should be fine since the completion in the XDP path is faster than in the SKB path that has 256 as the maximum number. This patch provides around 4% throughput improvement for the l2fwd application in xdpsock on my machine. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: Add support for a new feature Total Port ShutdownArkadiusz Kubalewski
After OS requests to down a link on a physical network port, the traffic is no longer being processed but the physical link with a link partner is still established. Currently there is a feature (Link down on close) which allows to physically bring the link down (after OS request). With this patch new feature with similar capability is introduced: TOTAL_PORT_SHUTDOWN Allows to physically disable the link on the NIC's port. If enabled, (after link down request from the OS) no link, traffic or led activity is possible on that port. If I40E_FLAG_TOTAL_PORT_SHUTDOWN is enabled, the I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED must be explicitly forced to true and cannot be disabled at that time. The functionalities are exclusive in terms of configuration, but they also have similar behavior (allowing to disable physical link of the port), with following differences: - LINK_DOWN_ON_CLOSE_ENABLED is configurable at host OS run-time and is supported by whole family of 7xx Intel Ethernet Controllers - TOTAL_PORT_SHUTDOWN may be enabled only before OS loads (in BIOS) only if motherboard's BIOS and NIC's FW has support of it - when LINK_DOWN_ON_CLOSE_ENABLED is used, the link is being brought down by sending phy_type=0 to NIC's FW - when TOTAL_PORT_SHUTDOWN is used, phy_type is not altered, instead the link is being brought down by clearing bit (I40E_AQ_PHY_ENABLE_LINK) in abilities field of i40e_aq_set_phy_config structure Introduced changes: - new private flag I40E_FLAG_TOTAL_PORT_SHUTDOWN for handling the feature - probe of NVM if the feature was enabled at driver's port initialization - special handling on link-down procedure to let FW physically shutdown the port if the feature was enabled Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-06-26Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2020-06-25 This series contains updates to i40e driver and removes the individual driver versions from all of the Intel wired LAN drivers. Shiraz moves the client header so that it can easily be shared between the i40e LAN driver and i40iw RDMA driver. Jesse cleans up the unused defines, since they are just dead weight. Alek reduces the unreasonably long wait time for a PF reset after reboot by using jiffies to limit the maximum wait time for the PF reset to succeed. Added additional logging to let the user know when the driver transitions into recovery mode. Adds new device support for our 5 Gbps NICs. Todd adds a check to see if MFS is set after warm reboot and notifies the user when MFS is set to anything lower than the default value. Arkadiusz fixes a possible race condition, where were holding a spin-lock while in atomic context. v2: removed code comments that were no longer applicable in patch 2 of the series. Also removed 'inline' from patch 4 and patch 8 of the series. Also re-arranged code to be able to remove the forward function declarations. Dropped patch 9 of the series, while the author works on cleaning up the commit message. v3: Updated patch 8 description to answer Jakub's questions ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25i40e: Remove scheduling while atomic possibilityAleksandr Loktionov
In some occasions task held spinlock (mac_filter_hash_lock), while being rescheduled due to admin queue mutex_lock. The struct i40e_spinlock asq_spinlock, which later expands to struct mutex spinlock. Moved i40e_aq_set_vsi_multicast_promiscuous(), i40e_aq_set_vsi_unicast_promiscuous(), i40e_aq_set_vsi_mc_promisc_on_vlan(), and i40e_aq_set_vsi_uc_promisc_on_vlan() outside of atomic context. Without this patch there is a race condition, which might result in scheduling while in atomic context. The race condition is between the thread, which holds mac_filter_hash_lock, while trying to acquire an admin queue mutex and a thread, which already has said admin queue mutex. The thread, which holds spinlock, fails to acquire the mutex, which causes this thread to sleep. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25i40e: Add support for 5Gbps cardsAleksandr Loktionov
Make possible for the i40e driver to bind to the new v710 for 5GBASE-T NICs. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alek Loktionov <aleksandr.loktionov@intel.com> CC: Kevin Liedtke <kevin.d.liedtke@intel.com> CC: Aaron Rowden <aaron.f.rowden@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2020-06-25i40e: Add a check to see if MFS is setTodd Fujinaka
A customer was chain-booting to provision his systems and one of the steps was setting MFS. MFS isn't cleared by normal warm reboots (clearing requires a GLOBR) and there was no indication of why Jumbo Frame receives were failing. Add a warning if MFS is set to anything lower than the default. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25i40e: detect and log info about pre-recovery modePiotr Kwapulinski
Detect and log information about pre-recovery mode when firmware transitions to a recovery mode. When a firmware transitions to a recovery mode it stores a number of unexpected EMP resets in one of its registers. The number of EMP resets ranging from 0x21 to 0x2A indicates that FW transitions to recovery mode. Use these values to emit log entry about transition process. Previously the pre-recovery mode may not have been detected and there was no log entry when NIC was in pre-recovery mode. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25i40e: make PF wait reset loop reliablePiotr Kwapulinski
Use jiffies to limit max waiting time for PF reset to succeed. Previous wait loop was unreliable. It required unreasonably long time to wait for PF reset after reboot when NIC was about to enter recovery mode Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25i40e: remove unused definesJesse Brandeburg
Remove all the unused defines as they are just dead weight. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25i40e: Move client header locationShiraz Saleem
Move i40e_client.h to include/linux/net/intel/* since its shared between i40iw and i40e. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18i40e: fix crash when Rx descriptor count is changedBjörn Töpel
When the AF_XDP buffer allocator was introduced, the Rx SW ring "rx_bi" allocation was moved from i40e_setup_rx_descriptors() function, and was instead done in the i40e_configure_rx_ring() function. This broke the ethtool set_ringparam() hook for changing the Rx descriptor count, which was relying on i40e_setup_rx_descriptors() to handle the allocation. Fix this by adding an explicit i40e_alloc_rx_bi() call to i40e_set_ringparam(). Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18i40e: protect ring accesses with READ- and WRITE_ONCECiara Loftus
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-01xdp: Rename convert_to_xdp_frame in xdp_convert_buff_to_frameLorenzo Bianconi
In order to use standard 'xdp' prefix, rename convert_to_xdp_frame utility routine in xdp_convert_buff_to_frame and replace all the occurrences Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
2020-05-28i40e: Make i40e_shutdown_adminq() return voidJason Yan
Fix the following coccicheck warning: drivers/net/ethernet/intel/i40e/i40e_adminq.c:699:13-21: Unneeded variable: "ret_code". Return "0" on line 710 Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28i40e: trivial fixup of comments in i40e_xsk.cJesper Dangaard Brouer
The comment above i40e_run_xdp_zc() was clearly copy-pasted from function i40e_xsk_umem_setup, which is just above. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28i40e: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOLBjörn Töpel
Remove MEM_TYPE_ZERO_COPY in favor of the new MEM_TYPE_XSK_BUFF_POOL APIs. The AF_XDP zero-copy rx_bi ring is now simply a struct xdp_buff pointer. v4->v5: Fixed "warning: Excess function parameter 'bi' description in 'i40e_construct_skb_zc'". (Jakub) Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: intel-wired-lan@lists.osuosl.org Link: https://lore.kernel.org/bpf/20200520192103.355233-9-bjorn.topel@gmail.com
2020-05-21i40e: Separate kernel allocated rx_bi rings from AF_XDP ringsBjörn Töpel
Continuing the path to support MEM_TYPE_XSK_BUFF_POOL, the AF_XDP zero-copy/sk_buff rx_bi rings are now separate. Functions to properly allocate the different rings are added as well. v3->v4: Made i40e_fd_handle_status() static. (kbuild test robot) v4->v5: Fix kdoc for i40e_clean_programming_status(). (Jakub) Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: intel-wired-lan@lists.osuosl.org Link: https://lore.kernel.org/bpf/20200520192103.355233-8-bjorn.topel@gmail.com
2020-05-21i40e: Refactor rx_bi accessesBjörn Töpel
As a first step to migrate i40e to the new MEM_TYPE_XSK_BUFF_POOL APIs, code that accesses the rx_bi (SW/shadow ring) is refactored to use an accessor function. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: intel-wired-lan@lists.osuosl.org Link: https://lore.kernel.org/bpf/20200520192103.355233-7-bjorn.topel@gmail.com
2020-05-21xsk: Move driver interface to xdp_sock_drv.hMagnus Karlsson
Move the AF_XDP zero-copy driver interface to its own include file called xdp_sock_drv.h. This, hopefully, will make it more clear for NIC driver implementors to know what functions to use for zero-copy support. v4->v5: Fix -Wmissing-prototypes by include header file. (Jakub) Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200520192103.355233-4-bjorn.topel@gmail.com
2020-05-14xdp: For Intel AF_XDP drivers add XDP frame_szJesper Dangaard Brouer
Intel drivers implement native AF_XDP zerocopy in separate C-files, that have its own invocation of bpf_prog_run_xdp(). The setup of xdp_buff is also handled in separately from normal code path. This patch update XDP frame_sz for AF_XDP zerocopy drivers i40e, ice and ixgbe, as the code changes needed are very similar. Introduce a helper function xsk_umem_xdp_frame_sz() for calculating frame size. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/158945347511.97035.8536753731329475655.stgit@firesoul
2020-05-14i40e: Add XDP frame size to driverJesper Dangaard Brouer
This driver uses different memory models depending on PAGE_SIZE at compile time. For PAGE_SIZE 4K it uses page splitting, meaning for normal MTU frame size is 2048 bytes (and headroom 192 bytes). For larger MTUs the driver still use page splitting, by allocating order-1 pages (8192 bytes) for RX frames. For PAGE_SIZE larger than 4K, driver instead advance its rx_buffer->page_offset with the frame size "truesize". For XDP frame size calculations, this mean that in PAGE_SIZE larger than 4K mode the frame_sz change on a per packet basis. For the page split 4K PAGE_SIZE mode, xdp.frame_sz is more constant and can be updated once outside the main NAPI loop. The default setting in the driver uses build_skb(), which provides the necessary headroom and tailroom for XDP-redirect in RX-frame (in both modes). There is one complication, which is legacy-rx mode (configurable via ethtool priv-flags). There are zero headroom in this mode, which is a requirement for XDP-redirect to work. The conversion to xdp_frame (convert_to_xdp_frame) will detect this insufficient space, and xdp_do_redirect() call will fail. This is deemed acceptable, as it allows other XDP actions to still work in legacy-mode. In legacy-mode + larger PAGE_SIZE due to lacking tailroom, we also accept that xdp_adjust_tail shrink doesn't work. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: intel-wired-lan@lists.osuosl.org Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Link: https://lore.kernel.org/bpf/158945346494.97035.12809400414566061815.stgit@firesoul
2020-04-21i40e: Remove unneeded conversion to boolJason Yan
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/net/ethernet/intel/i40e/i40e_main.c:1614:52-57: WARNING: conversion to bool not needed here drivers/net/ethernet/intel/i40e/i40e_main.c:11439:52-57: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: i40e: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24intel: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11i40e: Fix the conditional for i40e_vc_validate_vqs_bitmapsBrett Creeley
Commit d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation") introduced a necessary change for verifying how queue bitmaps from the iavf driver get validated. Unfortunately, the conditional was reversed. Fix this. Fixes: d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05i40e: Relax i40e_xsk_wakeup's return value when PF is busyMaciej Fijalkowski
Return -EAGAIN instead of -ENETDOWN to provide a slightly milder information to user space so that an application will know to retry the syscall when __I40E_CONFIG_BUSY bit is set on pf->state. Fixes: b3873a5be757 ("net/i40e: Fix concurrency issues between config flow and XSK") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20200205045834.56795-2-maciej.fijalkowski@intel.com
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24i40e: fix spelling mistake "to" -> "too"Colin Ian King
There is a spelling mistake in a hw_dbg message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-17i40e: Removing hung_queue variable to use txqueue function parameterJulio Faracco
The scope of function .ndo_tx_timeout was changed to include the hang queue when a TX timeout event occurs. See commit 0290bd291cc0 ("netdev: pass the stuck queue to the timeout handler") for more details. Now, drivers don't need to identify which queue is stopped. Drivers can simply use the queue index provided by dev_watchdog and execute all actions needed to restore network traffic. This commit do some cleanups into Intel i40e driver to remove a redundant loop to find stopped queue. Signed-off-by: Julio Faracco <jcfaracco@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09i40e: Set PHY Access flag on X722Adam Ludkiewicz
The X722 FW API version 1.9 adds support for accessing PHY registers with Admin Queue Command. This enables reading EEPROM data from (Q)SFP+ transceivers, what was previously possible only on X710 devices. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09i40e: Fix virtchnl_queue_select bitmap validationBrett Creeley
Currently in i40e_vc_disable_queues_msg() we are incorrectly validating the virtchnl queue select bitmaps. The virtchnl_queue_select rx_queues and tx_queue bitmap is being compared against ICE_MAX_VF_QUEUES, but the problem is that these bitmaps can have a value greater than I40E_MAX_VF_QUEUES. Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES). Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see if both virtchnl_queue_select bitmaps are empty along with checking that the bitmaps only have valid bits set. This function can then be used in both the queue enable and disable flows. Suggested-by: Arkady Gilinksky <arkady.gilinsky@harmonicinc.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-12-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 127 non-merge commits during the last 17 day(s) which contain a total of 110 files changed, 6901 insertions(+), 2721 deletions(-). There are three merge conflicts. Conflicts and resolution looks as follows: 1) Merge conflict in net/bpf/test_run.c: There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro") which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in BPF_PROG_TEST_RUN"): <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) + sizeof_field(struct __sk_buff, priority), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c There are a few occasions that look similar to this. Always take the chunk with offsetofend(). Note that there is one where the fields differ in here: <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) + sizeof_field(struct __sk_buff, tstamp), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to 850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN"). 2) Merge conflict in arch/riscv/net/bpf_jit_comp.c: (I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.) <<<<<<< HEAD if (is_13b_check(off, insn)) return -1; emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx); ======= emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx); >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Result should look like: emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx); 3) Merge conflict in arch/riscv/include/asm/pgtable.h: <<<<<<< HEAD ======= #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) #define vmemmap ((struct page *)VMEMMAP_START) >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Only take the BPF_* defines from there and move them higher up in the same file. Remove the rest from the chunk. The VMALLOC_* etc defines got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page calls"). Result: [...] #define __S101 PAGE_READ_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) [...] Let me know if there are any other issues. Anyway, the main changes are: 1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific to a provided BPF object file. This provides an alternative, simplified API compared to standard libbpf interaction. Also, add libbpf extern variable resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko. 2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also, add various BPF riscv JIT improvements, from Björn Töpel. 3) Extend bpftool to allow matching BPF programs and maps by name, from Paul Chaignon. 4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI flag for allowing updates without service interruption, from Andrey Ignatov. 5) Cleanup and simplification of ring access functions for AF_XDP with a bonus of 0-5% performance improvement, from Magnus Karlsson. 6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa. 7) Move and extend test_select_reuseport into BPF program tests under BPF selftests, from Jakub Sitnicki. 8) Various BPF sample improvements for xdpsock for customizing parameters to set up and benchmark AF_XDP, from Jay Jayatheerthan. 9) Improve libbpf to provide a ulimit hint on permission denied errors. Also change XDP sample programs to attach in driver mode by default, from Toke Høiland-Jørgensen. 10) Extend BPF test infrastructure to allow changing skb mark from tc BPF programs, from Nikita V. Shirokov. 11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King. 12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after libbpf conversion, from Jesper Dangaard Brouer. 13) Minor misc improvements from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
2019-12-20xsk: ixgbe: i40e: ice: mlx5: Xsk_umem_discard_addr to xsk_umem_release_addrMagnus Karlsson
Change the name of xsk_umem_discard_addr to xsk_umem_release_addr to better reflect the new naming of the AF_XDP queue manipulation functions. As this functions is used by drivers implementing support for AF_XDP zero-copy, it requires a name change to these drivers. The function xsk_umem_release_addr_rq has also changed name in the same fashion. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1576759171-28550-10-git-send-email-magnus.karlsson@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 20:58:44 +0000