summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e
AgeCommit message (Collapse)Author
2024-09-12intel: legacy: Partial revert of field get conversionSasha Neftin
commit ba54b1a276a6b69d80649942fe5334d19851443e upstream. Refactoring of the field get conversion introduced a regression in the legacy Wake On Lan from a magic packet with i219 devices. Rx address copied not correctly from MAC to PHY with FIELD_GET macro. Fixes: b9a452545075 ("intel: legacy: field get conversion") Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Florian Larysch <fl@n621.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-11e1000e: Fix S0ix residency on corporate systemsDima Ruinskiy
[ Upstream commit c93a6f62cb1bd097aef2e4588648a420d175eee2 ] On vPro systems, the configuration of the I219-LM to achieve power gating and S0ix residency is split between the driver and the CSME FW. It was discovered that in some scenarios, where the network cable is connected and then disconnected, S0ix residency is not always reached. This was root-caused to a subset of I219-LM register writes that are not performed by the CSME FW. Therefore, the driver should perform these register writes on corporate setups, regardless of the CSME FW state. This was discovered on Meteor Lake systems; however it is likely to appear on other platforms as well. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218589 Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240628201754.2744221-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17e1000e: change usleep_range to udelay in PHY mdic accessVitaly Lifshits
commit 387f295cb2150ed164905b648d76dfcbd3621778 upstream. This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems"). The referenced commit used usleep_range inside the PHY access routines, which are sometimes called from an atomic context. This can lead to a kernel panic in some scenarios, such as cable disconnection and reconnection on vPro systems. Solve this by changing the usleep_range calls back to udelay. Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by: Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/ Co-developed-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-10e1000e: move force SMBUS from enable ulp function to avoid PHY loss issueVitaly Lifshits
[ Upstream commit 861e8086029e003305750b4126ecd6617465f5c7 ] Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10e1000e: Minor flow correction in e1000_shutdown functionVitaly Lifshits
[ Upstream commit 662200e324daebe6859c1f0f3ea1538b0561425a ] Add curly braces to avoid entering to an if statement where it is not always required in e1000_shutdown function. This improves code readability and might prevent non-deterministic behaviour in the future. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10e1000e: Workaround for sporadic MDI error on Meteor Lake systemsVitaly Lifshits
[ Upstream commit 6dbdd4de0362c37e54e8b049781402e5a409e7d0 ] On some Meteor Lake systems accessing the PHY via the MDIO interface may result in an MDI error. This issue happens sporadically and in most cases a second access to the PHY via the MDIO interface results in success. As a workaround, introduce a retry counter which is set to 3 on Meteor Lake systems. The driver will only return an error if 3 consecutive PHY access attempts fail. The retry mechanism is disabled in specific flows, where MDI errors are expected. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Suggested-by: Nikolay Mushayev <nikolay.mushayev@intel.com> Co-developed-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10intel: legacy: field get conversionJesse Brandeburg
[ Upstream commit b9a4525450758dd75edbdaee97425ba7546c2b5c ] Refactor several older Intel drivers to use FIELD_GET(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ ( -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05e1000e: correct maximum frequency adjustment valuesJacob Keller
[ Upstream commit f1f6a6b1830a8f1dc92ee26fae76333f446b0663 ] The e1000e driver supports hardware with a variety of different clock speeds, and thus a variety of different increment values used for programming its PTP hardware clock. The values currently programmed in e1000e_ptp_init are incorrect. In particular, only two maximum adjustments are used: 24000000 - 1, and 600000000 - 1. These were originally intended to be used with the 96 MHz clock and the 25 MHz clock. Both of these values are actually slightly too high. For the 96 MHz clock, the actual maximum value that can safely be programmed is 23,999,938. For the 25 MHz clock, the maximum value is 599,999,904. Worse, several devices use a 24 MHz clock or a 38.4 MHz clock. These parts are incorrectly assigned one of either the 24million or 600million values. For the 24 MHz clock, this is not a significant issue: its current increment value can support an adjustment up to 7billion in the positive direction. However, the 38.4 KHz clock uses an increment value which can only support up to 230,769,157 before it starts overflowing. To understand where these values come from, consider that frequency adjustments have the form of: new_incval = base_incval + (base_incval * adjustment) / (unit of adjustment) The maximum adjustment is reported in terms of parts per billion: new_incval = base_incval + (base_incval * adjustment) / 1 billion The largest possible adjustment is thus given by the following: max_incval = base_incval + (base_incval * max_adj) / 1 billion Re-arranging to solve for max_adj: max_adj = (max_incval - base_incval) * 1 billion / base_incval We also need to ensure that negative adjustments cannot underflow. This can be achieved simply by ensuring max_adj is always less than 1 billion. Introduce new macros in e1000.h codifying the maximum adjustment in PPB for each frequency given its associated increment values. Also clarify where these values come from by commenting about the above equations. Replace the switch statement in e1000e_ptp_init with one which mirrors the increment value switch statement from e1000e_get_base_timinica. For each device, assign the appropriate maximum adjustment based on its frequency. Some parts can have one of two frequency modes as determined by E1000_TSYNCRXCTL_SYSCFI. Since the new flow directly matches the assignments in e1000e_get_base_timinca, and uses well defined macro names, it is much easier to verify that the resulting maximum adjustments are correct. It also avoids difficult to parse construction such as the "hw->mac.type < e1000_phc_lpt", and the use of fallthrough which was especially confusing when combined with a conditional block. Note that I believe the current increment value configuration used for 24MHz clocks is sub-par, as it leaves at least 3 extra bits available in the INCVALUE register. However, fixing that requires more careful review of the clock rate and associated values. Reported-by: Trey Harrison <harrisondigitalmedia@gmail.com> Fixes: 68fe1d5da548 ("e1000e: Add Support for 38.4MHZ frequency") Fixes: d89777bf0e42 ("e1000e: add support for IEEE-1588 PTP") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-24e1000e: Add support for the next LOM generationSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms. This patch provides the initial support for these devices. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-16e1000e: Use PME poll to circumvent unreliable ACPI wakeKai-Heng Feng
On some I219 devices, ethernet cable plugging detection only works once from PCI D3 state. Subsequent cable plugging does set PME bit correctly, but device still doesn't get woken up. Since I219 connects to the root complex directly, it relies on platform firmware (ACPI) to wake it up. In this case, the GPE from _PRW only works for first cable plugging but fails to notify the driver for subsequent plugging events. The issue was originally found on CNP, but the same issue can be found on ADL too. So workaround the issue by continuing use PME poll after first ACPI wake. As PME poll is always used, the runtime suspend restriction for CNP can also be removed. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-15net: e1000e: Remove unused declarationsYue Haibing
Commit bdfe2da6aefd ("e1000e: cosmetic move of function prototypes to the new mac.h") declared but never implemented them. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230814135821.4808-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-18e1000e: Add @adapter description to kdocBaozhu Ni
Provide a description for the kernel doc of the @adapter of e1000e_trigger_lsc() Signed-off-by: Baozhu Ni <nibaozhu@yeah.net> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19e1000e: Disable TSO on i219-LM card to increase speedSebastian Basierski
While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround"). Fix that by disabling TSO during driver probe. Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround") Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08e1000e: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30e1000e: Remove redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this doesn't control interrupt generation by the Root Port; that is controlled by the AER Root Error Command register, which is managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-09e1000e: Enable Link Partner Advertised SupportJamie Gloudon
This enables link partner advertised support to show link modes and pause frame use. Signed-off-by: Jamie Gloudon <jamie.gloudon@gmx.fr> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230103230653.1102544-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30e1000e: Fix TX dispatch conditionAkihiko Odaki
e1000_xmit_frame is expected to stop the queue and dispatch frames to hardware if there is not sufficient space for the next frame in the buffer, but sometimes it failed to do so because the estimated maximum size of frame was wrong. As the consequence, the later invocation of e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer remained forever, resulting in a watchdog failure. This change fixes the estimated size by making it match with the condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to account for the following lines which determines the space requirement for not causing NETDEV_TX_BUSY: ``` /* reserve a descriptor for the offload context */ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++; count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); ``` This issue was found when running http-stress02 test included in Linux Test Project 20220930 on QEMU with the following commandline: ``` qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8 -drive if=virtio,format=raw,file=root.img,file.locking=on -device e1000e,netdev=netdev -netdev tap,script=ifup,downscript=no,id=netdev ``` Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Remove unnecessary use of kmap_atomic()Anirudh Venkataramanan
alloc_rx_buf() allocates ps_page->page and buffer_info->page using either GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address(). I don't have access to a 32-bit system so did some limited testing on qemu (qemu-system-i386 -m 4096 -smp 4 -device e1000e) with a 32-bit Debian 11.04 image. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Add e1000e trace moduleSasha Neftin
Add tracepoints to the driver via a new file e1000e_trace.h and some new trace calls added in interesting places in the driver. Add some tracing for s0ix flows to help in a debug of shared resources with the CSME firmware. The idea here is that tracepoints have such low performance cost when disabled that we can leave these in the upstream driver. Performance not affected, and this can be very useful for debugging and adding new trace events to paths in the future. Usage: echo "e1000e_trace:*" > /sys/kernel/debug/tracing/set_event echo 1 > /sys/kernel/debug/tracing/events/e1000e_trace/enable Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Add support for the next LOM generationSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms. This patch provides the initial support for these devices. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Separate MTP board type from ADPSasha Neftin
We have the same LAN controller on different PCH's. Separate MTP board type from an ADP which will allow for specific fixes to be applied for MTP platforms. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-31ptp: introduce helpers to adjust by scaled parts per millionJacob Keller
Many drivers implement the .adjfreq or .adjfine PTP op function with the same basic logic: 1. Determine a base frequency value 2. Multiply this by the abs() of the requested adjustment, then divide by the appropriate divisor (1 billion, or 65,536 billion). 3. Add or subtract this difference from the base frequency to calculate a new adjustment. A few drivers need the difference and direction rather than the combined new increment value. I recently converted the Intel drivers to .adjfine and the scaled parts per million (65.536 parts per billion) logic. To avoid overflow with minimal loss of precision, mul_u64_u64_div_u64 was used. The basic logic used by all of these drivers is very similar, and leads to a lot of duplicate code to perform the same task. Rather than keep this duplicate code, introduce diff_by_scaled_ppm and adjust_by_scaled_ppm. These helper functions calculate the difference or adjustment necessary based on the scaled parts per million input. The diff_by_scaled_ppm function returns true if the difference should be subtracted, and false otherwise. Update the Intel drivers to use the new helper functions. Other vendor drivers will be converted to .adjfine and this helper function in the following changes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-08drivers/net/ethernet/e1000e: check return value of e1e_rphy()Li Zhong
e1e_rphy() could return error value when reading PHY register, which needs to be checked. Signed-off-by: Li Zhong <floridsleeves@gmail.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28e1000e: convert .adjfreq to .adjfineJacob Keller
The PTP implementation for the e1000e driver uses the older .adjfreq method. This method takes an adjustment in parts per billion. The newer .adjfine implementation uses scaled_ppm. The use of scaled_ppm allows for finer grained adjustments and is preferred over using the older implementation. Make use of mul_u64_u64_div_u64 in order to handle possible overflow of the multiplication used to calculate the desired adjustment to the hardware increment value. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28e1000e: remove unnecessary range check in e1000e_phc_adjfreqJacob Keller
The e1000e_phc_adjfreq function validates that the input delta is within the maximum range. This is already handled by the core PTP code and this is a duplicate and thus unnecessary check. It also complicates refactoring to use the newer .adjfine implementation, where the input is no longer specified in parts per billion. Remove the range validation check. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14Revert "e1000e: Fix possible HW unit hang after an s0ix exit"Sasha Neftin
This reverts commit 1866aa0d0d6492bc2f8d22d0df49abaccf50cddd. Commit 1866aa0d0d64 ("e1000e: Fix possible HW unit hang after an s0ix exit") was a workaround for CSME problem to handle messages comes via H2ME mailbox. This problem has been fixed by patch "e1000e: Enable the GPT clock before sending message to the CSME". Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-14e1000e: Enable GPT clock before sending message to CSMESasha Neftin
On corporate (CSME) ADL systems, the Ethernet Controller may stop working ("HW unit hang") after exiting from the s0ix state. The reason is that CSME misses the message sent by the host. Enabling the dynamic GPT clock solves this problem. This clock is cleared upon HW initialization. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-30intel/e1000e:fix repeated words in commentsJilin Yuan
Delete the redundant word 'frames'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel: remove unused macrosJesse Brandeburg
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-13e1000e: Fix possible overflow in LTR decodingSasha Neftin
When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: stable@vger.kernel.org Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <jahutchinson99@googlemail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Tested-by: James Hutchinson <jahutchinson99@googlemail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09e1000e: Print PHY register address when MDI read/write failsChen Yu
There is occasional suspend error from e1000e which blocks the system from further suspending. And the issue was found on a WhiskeyLake-U platform with I219-V: [ 20.078957] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x780 [e1000e] returns -2 [ 20.078970] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -2 [ 20.078974] e1000e 0000:00:1f.6: PM: pci_pm_suspend+0x0/0x170 returned -2 after 371012 usecs [ 20.078978] e1000e 0000:00:1f.6: PM: failed to suspend async: error -2 According to the code flow, this might be caused by broken MDI read/write to PHY registers. However currently the code does not tell us which register is broken. Thus enhance the debug information to print the offender PHY register. So the next the issue is reproduced, this information could be used for narrow down. Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Todd Brandt <todd.e.brandt@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220308172030.451566-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28e1000e: Correct NVM checksum verification flowSasha Neftin
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp, NVM checksum update is still possible. Emit a more detailed warning message. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663 Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum") Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28e1000e: Fix possible HW unit hang after an s0ix exitSasha Neftin
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01e1000e: Handshake with CSME starts from ADL platformsSasha Neftin
Handshake with CSME/AMT on none provisioned platforms during S0ix flow is not supported on TGL platform and can cause to HW unit hang. Update the handshake with CSME flow to start from the ADL platform. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-01e1000e: Separate ADP board type from TGPSasha Neftin
We have the same LAN controller on different PCH's. Separate ADP board type from a TGP which will allow for specific fixes to be applied for ADP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-27e1000e: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20e1000e: Fix packet loss on Tiger Lake and laterSasha Neftin
Update the HW MAC initialization flow. Do not gate DMA clock from the modPHY block. Keeping this clock will prevent dropped packets sent in burst mode on the Kumeran interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20e1000e: Separate TGP board type from SPTSasha Neftin
We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19e1000e: Remove redundant statementluo penghao
This assignment statement is meaningless, because the statement will execute to the tag "set_itr_now". The clang_analyzer complains as follows: drivers/net/ethernet/intel/e1000e/netdev.c:2552:3 warning: Value stored to 'current_itr' is never read. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 11:21:47 +0000