summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)Author
2021-10-12net: hns: Prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, take the opportunity to refactor the hnae_handle structure to switch the last member to flexible array, changing the code accordingly. Also, fix the comment in the hnae_vf_cb structure to inform that the ae_handle member must be the last member. Then, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. This code was detected with the help of Coccinelle and audited and fixed manually. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07ethernet: use device_get_ethdev_address()Jakub Kicinski
Use the new device_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - device_get_mac_address(np, dev->dev_addr, ETH_ALEN) + device_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: remove the addr len from mac helpersJakub Kicinski
All callers pass in ETH_ALEN and the function itself will return -EINVAL for any other address length. Just assume it's ETH_ALEN like all other mac address helpers (nvm, of, platform). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: change the return type of mac address helpersJakub Kicinski
fwnode_get_mac_address() and device_get_mac_address() return a pointer to the buffer that was passed to them on success or NULL on failure. None of the callers care about the actual value, only if it's NULL or not. These semantics differ from of_get_mac_address() which returns an int so to avoid confusion make the device helpers return an errno. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/phy/bcm7xxx.c d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations") f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") net/sched/sch_api.c b193e15ac69d ("net: prevent user from passing illegal stab size") 69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers") Both cases trivial - adjacent code additions. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-29net: hns3: disable firmware compatible features when uninstall PFGuangbin Huang
Currently, the firmware compatible features are enabled in PF driver initialization process, but they are not disabled in PF driver deinitialization process and firmware keeps these features in enabled status. In this case, if load an old PF driver (for example, in VM) which not support the firmware compatible features, firmware will still send mailbox message to PF when link status changed and PF will print "un-supported mailbox message, code = 201". To fix this problem, disable these firmware compatible features in PF driver deinitialization process. Fixes: ed8fb4b262ae ("net: hns3: add link change event report") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: fix always enable rx vlan filter problem after selftestGuangbin Huang
Currently, the rx vlan filter will always be disabled before selftest and be enabled after selftest as the rx vlan filter feature is fixed on in old device earlier than V3. However, this feature is not fixed in some new devices and it can be disabled by user. In this case, it is wrong if rx vlan filter is enabled after selftest. So fix it. Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: PF enable promisc for VF when mac table is overflowGuangbin Huang
If unicast mac address table is full, and user add a new mac address, the unicast promisc needs to be enabled for the new unicast mac address can be used. So does the multicast promisc. Now this feature has been implemented for PF, and VF should be implemented too. When the mac table of VF is overflow, PF will enable promisc for this VF. Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: fix show wrong state when add existing uc mac addressJian Shen
Currently, if function adds an existing unicast mac address, eventhough driver will not add this address into hardware, but it will return 0 in function hclge_add_uc_addr_common(). It will cause the state of this unicast mac address is ACTIVE in driver, but it should be in TO-ADD state. To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST if mac address is existing, and delete two error log to avoid printing them all the time after this modification. Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLEJian Shen
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is supposed to set when enable multiple TCs with ets. But the driver mixed the flags when updating the tm configuration. Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE too, so remove the unnecessary limitation. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: don't rollback when destroy mqprio failJian Shen
For destroy mqprio is irreversible in stack, so it's unnecessary to rollback the tc configuration when destroy mqprio failed. Otherwise, it may cause the configuration being inconsistent between driver and netstack. As the failure is usually caused by reset, and the driver will restore the configuration after reset, so it can keep the configuration being consistent between driver and hardware. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: remove tc enable checkingJian Shen
Currently, in function hns3_nic_set_real_num_queue(), the driver doesn't report the queue count and offset for disabled tc. If user enables multiple TCs, but only maps user priorities to partial of them, it may cause the queue range of the unmapped TC being displayed abnormally. Fix it by removing the tc enable checking, ensure the queue count is not zero. With this change, the tc_en is useless now, so remove it. Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: do not allow call hns3_nic_net_open repeatedlyJian Shen
hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: hns3: fix hclge_dbg_dump_tm_pg() stack usageArnd Bergmann
This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139ddb3 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: hns: Fix spelling mistake "maped" -> "mapped"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: fix a return value error in hclge_get_reset_status()Yufeng Mo
hclge_get_reset_status() should return the tqp reset status. However, if the CMDQ fails, the caller will take it as tqp reset success status by mistake. Therefore, uses a parameters to get the tqp reset status instead. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: check vlan id before using itliaoguojia
The input parameters may not be reliable, so check the vlan id before using it, otherwise may set wrong vlan id into hardware. Fixes: dc8131d846d4 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls") Signed-off-by: liaoguojia <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: check queue id range before usingYufeng Mo
The input parameters may not be reliable. Before using the queue id, we should check this parameter. Otherwise, memory overwriting may occur. Fixes: d34100184685 ("net: hns3: refactor the mailbox message between PF and VF") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: fix misuse vf id and vport id in some logsJiaran Zhang
vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs. So the actual vf id is equal to vport_id minus 1. Some VF print logs are actually vport, and logs of vf id actually use vport id, so this patch fixes them. Fixes: ac887be5b0fe ("net: hns3: change print level of RAS error log from warning to error") Fixes: adcf738b804b ("net: hns3: cleanup some print format warning") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: fix inconsistent vf id printJian Shen
The vf id from ethtool is added 1 before configured to driver. So it's necessary to minus 1 when printing it, in order to keep consistent with user's configuration. Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: fix change RSS 'hfunc' ineffective issueJian Shen
When user change rss 'hfunc' without set rss 'hkey' by ethtool -X command, the driver will ignore the 'hfunc' for the hkey is NULL. It's unreasonable. So fix it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: 374ad291762a ("net: hns3: Add RSS general configuration support for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts! Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14net: hns3: PF support get multicast MAC address space assigned by firmwareGuangbin Huang
The new firmware supports to divides the whole multicast MAC address space equally to functions of all PFs, and calculates the space size of each PF according to its function number. To support this feature, PF driver adds querying multicast MAC address space size from firmware and limits used number according to space size. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net: hns3: PF support get unicast MAC address space assigned by firmwareGuangbin Huang
Currently, there are two ways for PF to set the unicast MAC address space size: specified by config parameters in firmware or set to default value. That's mean if the config parameters in firmware is zero, driver will divide the whole unicast MAC address space equally to 8 PFs. However, in this case, the unicast MAC address space will be wasted a lot when the hardware actually has less then 8 PFs. And in the other hand, if one PF has much more VFs than other PFs, then each function of this PF will has much less address space than other PFs. In order to ameliorate the above two situations, introduce the third way of unicast MAC address space assignment: firmware divides the whole unicast MAC address space equally to functions of all PFs, and calculates the space size of each PF according to its function number. PF queries the space size by the querying device specification command when in initialization process. The third way assignment is lower priority than specified by config parameters, only if the config parameters is zero can be used, and if firmware does not support the third way assignment, then driver still divides the whole unicast MAC address space equally to 8 PFs. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: fix the timing issue of VF clearing interrupt sourcesJiaran Zhang
Currently, the VF does not clear the interrupt source immediately after receiving the interrupt. As a result, if the second interrupt task is triggered when processing the first interrupt task, clearing the interrupt source before exiting will clear the interrupt sources of the two tasks at the same time. As a result, no interrupt is triggered for the second task. The VF detects the missed message only when the next interrupt is generated. Clearing it immediately after executing check_evt_cause ensures that: 1. Even if two interrupt tasks are triggered at the same time, they can be processed. 2. If the second task is triggered during the processing of the first task and the interrupt source is not cleared, the interrupt is reported after vector0 is enabled. Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: fix the exception when query imp infoJiaran Zhang
When the command for querying imp info is issued to the firmware, if the firmware does not support the command, the returned value of bd num is 0. Add protection mechanism before alloc memory to prevent apply for 0-length memory. Fixes: 0b198b0d80ea ("net: hns3: refactor dump m7 info of debugfs") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: disable mac in flr processYufeng Mo
The firmware will not disable mac in flr process. Therefore, the driver needs to proactively disable mac during flr, which is the same as the function reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: change affinity_mask to numa node rangeYufeng Mo
Currently, affinity_mask is set to a single cpu. As a result, irqbalance becomes invalid in SUBSET or EXACT mode. To solve this problem, change affinity_mask to numa node range. In this way, irqbalance can be performed on the cpu of the numa node. Fixes: 0812545487ec ("net: hns3: add interrupt affinity support for misc interrupt") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: pad the short tunnel frame before sending to hardwareYufeng Mo
The hardware cannot handle short tunnel frames below 65 bytes, and will cause vlan tag missing problem. So pads packet size to 65 bytes for tunnel frames to fix this bug. Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: add option to turn off page pool featureYunsheng Lin
When page pool is added to the hns3 driver, it is always enabled unconditionally, which means spilt page handling in the hns3 driver is dead code. As there is a requirement to test the performance between spilt page handling in driver and page pool, so add a module param to support disabling the page pool. When the page pool is proved to perform better in most case, the spilt page handling in driver can be removed. Fixes: 93188e9642c3 ("net: hns3: support skb's frag page recycling based on page pool") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 staticchongjiapeng
This symbols is not used outside of hclge_cmd.c and hclgevf_cmd.c, so marks it static. Fix the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c:345:35: warning: symbol 'hclgevf_cmd_caps_bit_map0' was not declared. Should it be static? drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:365:33: warning: symbol 'hclge_cmd_caps_bit_map0' was not declared. Should it be static? Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: remove unnecessary spacesHao Chen
This patch removes some unnecessary spaces for cleanup. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: add some required spacesHao Chen
Add some required spaces to improve readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: clean up a type mismatch warningGuojia Liao
abs() returns signed long, which could not convert the type as unsigned, and it may cause a mismatch type warning from static tools. To fix it, this patch uses an variable to save the abs()'s result and does a explicit conversion. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: refine function hns3_set_default_feature()Jian Shen
Currently, the driver sets default feature for netdev->features, netdev->hw_features, netdev->vlan_features and netdev->hw_enc_features separately. It's fussy, because most of the feature bits are same. So refine it by copy value from netdev->features. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: uniform parameter name of hclge_ptp_clean_tx_hwts()Hao Chen
The parameter name of hclge_ptp_clean_tx_hwts() in declaration is "dev", but the definition of this function is used the common name "hdev" as other functions, so modify it. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hnss3: use max() to simplify codeHao Chen
Replace the "? :" statement wich max() to simplify code. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: modify a print format of hns3_dbg_queue_map()Hao Chen
The type of tqp_vector->vector_irq is int, so modify its print format to "%d". Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: refine function hclge_dbg_dump_tm_pri()Guangbin Huang
To improve flexibility, simplicity and maintainability to dump info of every element of tm priority, add a struct hclge_dbg_item array of tm priority and fill string of every data according to this array. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hclge_ets_validate()Guangbin Huang
This patch reconstructs function hclge_ets_validate() to reduce the code cycle complexity and make code more concise. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hns3_self_testPeng Li
This patch reconstructs function hns3_self_test to reduce the code cycle complexity and make code more concise. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: initialize each member of structure array on a separate lineJiaran Zhang
To make the format of each member initialization of structure array clearer, initialize each member on a separate line. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: add required space in commentHao Chen
Add some required spaces in comment for cleanup. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: remove unnecessary "static" of local variables in functionHao Chen
Some local variable declarations are no need to add "static", so remove it. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: don't config TM DWRR twice when set ETSGuangbin Huang
The function hclge_tm_dwrr_cfg() will be called twice in function hclge_ieee_setets() when map_changed is true, the calling flow is hclge_ieee_setets() hclge_map_update() | hclge_tm_schd_setup_hw() | hclge_tm_dwrr_cfg() hclge_notify_init_up() hclge_tm_dwrr_cfg() It is no need to call hclge_tm_dwrr_cfg() twice actually, so just return after calling hclge_notify_init_up(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 01:48:35 +0000