summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)Author
2022-09-07net: hns3: support ndo_select_queue()Guangbin Huang
To support tx packets to select queue according to its dscp field after setting dscp and tc map relationship, this patch implements ndo_select_queue() to set skb->priority according to the user's setting dscp and priority map relationship. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: hns3: add support config dscp map to tcGuangbin Huang
This patch add support config dscp map to tc by implementing ieee_setapp and ieee_delapp of struct dcbnl_rtnl_ops. Driver will convert mapping relationship from dscp-prio to dscp-tc. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: hns3: net: hns3: add querying and setting fec off mode from firmwareGuangbin Huang
For some new devices, the FEC mode can not be set to OFF in speed 200G. In order to flexibly adapt to all types of devices, driver queries fec ability from firmware to decide whether OFF mode can be supported. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: hns3: add querying and setting fec llrs mode from firmwareHao Lan
This patch supports llrs fec mode in speed 200G for some new devices, and suppoprts querying llrs fec ability from firmware. Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: hns3: add querying fec ability from firmwareGuangbin Huang
For some new devices, driver can queries fec ability from firmware to decide which FEC mode can be supported. If devices of old version which not support querying fec ability, driver sets fixed ability according to current speed. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: hns3: add getting capabilities of gro offload and fd from firmwareGuangbin Huang
As some new devices may not support GRO offload and flow table director, to support these devices, driver needs to querying capabilities of GRO offload and flow table director from firmware. Whether the driver supports these two features depends on capabilities. For old device of version HNAE3_DEVICE_VERSION_V2, driver sets their capabilities of these two features to fixed value. Setting default features of netdev and debugfs also need to identify whether support these two features. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04net: hns: Fix spelling mistakes in comments.Zhang Jiaming
Fix spelling of 'waitting' in comments. remove unnecessary space of 'MDIO_COMMAND_REG 's'. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-30hisilicon/hns3/hns3vf:fix repeated words in commentsJilin Yuan
Delete the redundant word 'new'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220629131330.16812-1-yuanjilin@cdjrlc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13net: hns3: fix tm port shapping of fibre port is incorrect after driver ↵Guangbin Huang
initialization Currently in driver initialization process, driver will set shapping parameters of tm port to default speed read from firmware. However, the speed of SFP module may not be default speed, so shapping parameters of tm port may be incorrect. To fix this problem, driver sets new shapping parameters for tm port after getting exact speed of SFP module in this case. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: fix PF rss size initialization bugJie Wang
Currently hns3 driver misuses the VF rss size to initialize the PF rss size in hclge_tm_vport_tc_info_update. So this patch fix it by checking the vport id before initialization. Fixes: 7347255ea389 ("net: hns3: refactor PF rss get APIs with new common rss get APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: restore tm priority/qset to default settings when tc disabledGuangbin Huang
Currently, settings parameters of schedule mode, dwrr, shaper of tm priority or qset of one tc are only be set when tc is enabled, they are not restored to the default settings when tc is disabled. It confuses users when they cat tm_priority or tm_qset files of debugfs. So this patch fixes it. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: modify the ring param print infoJie Wang
Currently tx push is also a ring param. So the original ring param print info in hns3_is_ringparam_changed should be adjusted. Fixes: 07fdc163ac88 ("net: hns3: refactor hns3_set_ringparam()") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: don't push link state to VF if unaliveJian Shen
It's unnecessary to push link state to unalive VF, and the VF will query link state from PF when it being start works. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: set port base vlan tbl_sta to false before removing old vlanGuangbin Huang
When modify port base vlan, the port base vlan tbl_sta needs to set to false before removing old vlan, to indicate this operation is not finish. Fixes: c0f46de30c96 ("net: hns3: fix port base vlan add fail when concurrent with reset") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: hns3: fix incorrect type of argument in declaration of function ↵Guangbin Huang
hclge_comm_get_rss_indir_tbl The argument rss_ind_tbl_size is type u16 in function definition of hclge_comm_get_rss_indir_tbl(), but it is set to type __le16 in function declaration by mistake, so fix it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: hns3: add query vf ring and vector map relationGuangbin Huang
This patch adds a new mailbox opcode to query map relation between vf ring and vector. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: hns3: add byte order conversion for VF to PF mailbox messageJie Wang
This patch uses __le16/__32 to define mailbox data structures. Then byte order conversion are added for mailbox messages from VF to PF. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: hns3: add byte order conversion for PF to VF mailbox messageJie Wang
Currently, hns3 mailbox processing between PF and VF missed to convert message byte order and use data type u16 instead of __le16 for mailbox data process. These processes may cause problems between different architectures. So this patch uses __le16/__le32 data type to define mailbox data structures. To be compatible with old hns3 driver, these structures use one-byte alignment. Then byte order conversions are added to mailbox messages from PF to VF. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: hns3: remove the affinity settings of vector0Yufeng Mo
Vector0 is used for common interrupt control events and is irrelevant to performance. Currently, the driver sets the default affinity of vector0 to NUMA nodes, which is unnecessary. Therefore, the default setting is removed, and the driver does not set the affinity for vector0. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: hns3: fix access null pointer issue when set tx-buf-size as 0Hao Chen
When set tx-buf-size as 0 by ethtool, hns3_init_tx_spare_buffer() will return directly and priv->ring->tx_spare->len is uninitialized, then print function access priv->ring->tx_spare->len will cause this issue. When set tx-buf-size as 0 by ethtool, the print function will print 0 directly and not access priv->ring->tx_spare->len. Fixes: 2373b35c24ff ("net: hns3: add log for setting tx spare buf size") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08eth: switch to netif_napi_add_weight()Jakub Kicinski
Switch all Ethernet drivers which use custom napi weights to the new API. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-25net: hns: Add missing fwnode_handle_put in hns_mac_initPeng Wu
In one of the error paths of the device_for_each_child_node() loop in hns_mac_init, add missing call to fwnode_handle_put. Signed-off-by: Peng Wu <wupeng58@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: add return value for mailbox handling in PFJian Shen
Currently, there are some querying mailboxes sent from VF to PF, and VF will wait the PF's handling result. For mailbox HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail when the input parameter is invalid, but the prototype of their handler function is void. In this case, PF always return success to VF, which may cause the VF get incorrect result. Fixes it by adding return value for these function. Fixes: 63b1279d9905 ("net: hns3: check queue id range before using") Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: add validity check for message data lengthJian Shen
Add validity check for message data length in function hclge_send_mbx_msg(), avoid unexpected overflow. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: modify the return code of hclge_get_ring_chain_from_mbxJie Wang
Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to return -EINVAL for the invalid parameter case. So this patch fixes it by return -EINVAL in this abnormal branch. Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: fix error log of tx/rx tqps statsPeng Li
The comments in function hclge_comm_tqps_update_stats is not right, so fix it. Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: align the debugfs output to the leftHao Chen
For debugfs node rx/tx_queue_info and rx/tx_bd_info, their output info is aligned to the right, it's not aligned with output of other debugfs node, so uniform their output info. Fixes: 907676b13071 ("net: hns3: use tx bounce buffer for small packets") Fixes: e44c495d95e0 ("net: hns3: refactor queue info of debugfs") Fixes: 77e9184869c9 ("net: hns3: refactor dump bd info of debugfs") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: clear inited state and stop client after failed to register netdevJian Shen
If failed to register netdev, it needs to clear INITED state and stop client in case of cause problem when concurrency with uninitialized process of driver. Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22net: hns3: Fix spelling mistake "actvie" -> "active"Colin Ian King
There is a spelling mistake in a netdev_info message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220421085546.321792-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-20net: hns3: remove unnecessary line wrap for hns3_set_tunableHao Chen
Remove unnecessary line wrap for hns3_set_tunable to improve function readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: replace magic value by HCLGE_RING_REG_OFFSETPeng Li
Magic values are not recommended. Signed-off-by: Peng Li<lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: fix the wrong words in commentsPeng Li
This patch fixes wrong words in comments. Signed-off-by: Peng Li<lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: update the comment of function hclgevf_get_mbx_respPeng Li
The param of function hclgevf_get_mbx_resp has been changed but the comments not upodated. This patch updates it. Signed-off-by: Peng Li<lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: add log for setting tx spare buf sizeHao Chen
For the active tx spare buffer size maybe changed according to the page size, so add log to notice it. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: add failure logs in hclge_set_vport_mtuJie Wang
Currently, There is a low probability that pf mtu configuration fails, but the information in logs is insufficient for problem locating when the VF mtu value is illegally modified. So record the vf index and vf mtu value at the failure scenario. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: refine the definition for struct hclge_pf_to_vf_msgJian Shen
The struct hclge_pf_to_vf_msg is used for mailbox message from PF to VF, including both response and request. But its definition can only indicate respone, which makes the message data copy in function hclge_send_mbx_msg() unreadable. So refine it by edding a general message definition into it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: refactor hns3_set_ringparam()Hao Chen
Use struct hns3_ring_param to replace variable new/old_xxx and add hns3_is_ringparam_changed() to judge them if is changed to improve code readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: add ethtool parameter check for CQE/EQE modeYufeng Mo
For DEVICE_VERSION_V2, the hardware does not support the CQE mode. So add capability bit for coalesce CQE mode and add parameter check for it in ethtool. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: hns3: add tx push support in hns3 ring param processJie Wang
This patch adds tx push param to hns3 ring param and adapts the set and get API of ring params. So users can set it by cmd ethtool -G and get it by cmd ethtool -g. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-31net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardwareGuangbin Huang
When user delete vlan 0, as driver will not delete vlan 0 for hardware in function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should not be deleted. Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31net: hns3: fix the concurrency between functions reading debugfsYufeng Mo
Currently, the debugfs mechanism is that all functions share a global variable to save the pointer for obtaining data. When different functions concurrently access the same file node, repeated release exceptions occur. Therefore, the granularity of the pointer for storing the obtained data is adjusted to be private for each function. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-26net: hns3: fix phy can not link up when autoneg off and resetGuangbin Huang
Currently, function hclge_mdio_read() will return 0 if during reset(the cmd state will be set to disable). If use general phy driver, the phy_state_machine() will update phy speed every second in function genphy_read_status_fixed() when PHY is set to autoneg off, no matter of link down or link up. If phy driver happens to read BMCR register during reset, phy speed will be updated to 10Mpbs as BMCR register value is 0. So it may call phy can not link up if previous speed is not 10Mpbs. To fix this problem, function hclge_mdio_read() should return -EBUSY if the cmd state is disable. So does function hclge_mdio_write(). Fixes: 1c1249380992 ("net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: hns3: add NULL pointer check for hns3_set/get_ringparam()Hao Chen
When pci devices init failed and haven't reinit, priv->ring is NULL and hns3_set/get_ringparam() will access priv->ring. it causes call trace. So, add NULL pointer check for hns3_set/get_ringparam() to avoid this situation. Fixes: 5668abda0931 ("net: hns3: add support for set_ringparam") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: hns3: add netdev reset check for hns3_set_tunable()Hao Chen
When pci device reset failed, it does uninit operation and priv->ring is NULL, it causes accessing NULL pointer error. Add netdev reset check for hns3_set_tunable() to fix it. Fixes: 99f6b5fb5f63 ("net: hns3: use bounce buffer when rx page can not be reused") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: hns3: clean residual vf config after disable sriovPeng Li
After disable sriov, VF still has some config and info need to be cleaned, which configured by PF. This patch clean the HW config and SW struct vport->vf_info. Fixes: fa8d82e853e8 ("net: hns3: Add support of .sriov_configure in HNS3 driver") Signed-off-by: Peng Li<lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: hns3: add max order judgement for tx spare bufferHao Chen
Add max order judgement for tx spare buffer to avoid triggering call trace, print related fail information instead, when user set tx spare buf size to a large value which causes order exceeding 10. Fixes: e445f08af2b1 ("net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 07:52:26 +0000