summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/engleder/tsnep_main.c
AgeCommit message (Collapse)Author
2023-04-24tsnep: Add XDP socket zero-copy TX supportGerhard Engleder
Send and complete XSK pool frames within TX NAPI context. NAPI context is triggered by ndo_xsk_wakeup. Test results with A53 1.2GHz: xdpsock txonly copy mode, 64 byte frames: pps pkts 1.00 tx 284,409 11,398,144 Two CPUs with 100% and 10% utilization. xdpsock txonly zero-copy mode, 64 byte frames: pps pkts 1.00 tx 511,929 5,890,368 Two CPUs with 100% and 1% utilization. xdpsock l2fwd copy mode, 64 byte frames: pps pkts 1.00 rx 248,985 7,315,885 tx 248,921 7,315,885 Two CPUs with 100% and 10% utilization. xdpsock l2fwd zero-copy mode, 64 byte frames: pps pkts 1.00 rx 254,735 3,039,456 tx 254,735 3,039,456 Two CPUs with 100% and 4% utilization. Packet rate increases and CPU utilization is reduced in both cases. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add XDP socket zero-copy RX supportGerhard Engleder
Add support for XSK zero-copy to RX path. The setup of the XSK pool can be done at runtime. If the netdev is running, then the queue must be disabled and enabled during reconfiguration. This can be done easily with functions introduced in previous commits. A more important property is that, if the netdev is running, then the setup of the XSK pool shall not stop the netdev in case of errors. A broken netdev after a failed XSK pool setup is bad behavior. Therefore, the allocation and setup of resources during XSK pool setup is done only before any queue is disabled. Additionally, freeing and later allocation of resources is eliminated in some cases. Page pool entries are kept for later use. Two memory models are registered in parallel. As a result, the XSK pool setup cannot fail during queue reconfiguration. In contrast to other drivers, XSK pool setup and XDP BPF program setup are separate actions. XSK pool setup can be done without any XDP BPF program. The XDP BPF program can be added, removed or changed without any reconfiguration of the XSK pool. Test results with A53 1.2GHz: xdpsock rxdrop copy mode, 64 byte frames: pps pkts 1.00 rx 856,054 10,625,775 Two CPUs with both 100% utilization. xdpsock rxdrop zero-copy mode, 64 byte frames: pps pkts 1.00 rx 889,388 4,615,284 Two CPUs with 100% and 20% utilization. Packet rate increases and CPU utilization is reduced. 100% CPU load seems to the base load. This load is consumed by ksoftirqd just for dropping the generated packets without xdpsock running. Using batch API reduced CPU utilization slightly, but measurements are not stable enough to provide meaningful numbers. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Move skb receive action to separate functionGerhard Engleder
The function tsnep_rx_poll() is already pretty long and the skb receive action can be reused for XSK zero-copy support. Move page based skb receive to separate function. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add functions for queue enable/disableGerhard Engleder
Move queue enable and disable code to separate functions. This way the activation and deactivation of the queues are defined actions, which can be used in future execution paths. This functions will be used for the queue reconfiguration at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Rework TX/RX queue initializationGerhard Engleder
Make initialization of TX and RX queues less dynamic by moving some initialization from netdev open/close to device probing. Additionally, move some initialization code to separate functions to enable future use in other execution paths. This is done as preparation for queue reconfigure at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Replace modulo operation with maskGerhard Engleder
TX/RX ring size is static and power of 2 to enable compiler to optimize modulo operation to mask operation. Make this optimization already in the code and don't rely on the compiler. CPU utilisation during high packet rate has not changed. So no performance improvement has been measured. But it is best practice to prevent modulo operations. Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22ethernet: remove superfluous clearing of phydevWolfram Sang
phy_disconnect() calls phy_detach() which already clears 'phydev' if it is attached to a struct net_device. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230321131745.27688-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-25tsnep: Fix TX queue stop/wake for multiple queuesGerhard Engleder
netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok as long as only a single TX queue is supported. But support for multiple TX queues was introduced with 762031375d5c and I missed to adapt stop and wake of TX queues. Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific TX queue. Fixes: 762031375d5c ("tsnep: Support multiple TX/RX queue pairs") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20net: Remove C45 check in C22 only MDIO bus driversAndrew Lunn
The MDIO core should not pass a C45 request via the C22 API call any more. So remove the tests from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-18tsnep: Support XDP BPF program setupGerhard Engleder
Implement setup of BPF programs for XDP RX path with command XDP_SETUP_PROG of ndo_bpf(). This is the final step for XDP RX path support. There is no need to reinit the RX queues as they are always prepared for XDP. Additionally remove $(tsnep-y) from $(tsnep-objs) because it is added automatically. Test results with A53 1.2GHz: XDP_DROP (samples/bpf/xdp1) proto 17: 883878 pkt/s XDP_TX (samples/bpf/xdp2) proto 17: 255693 pkt/s XDP_REDIRECT (samples/bpf/xdpsock) sock0@eth2:0 rxdrop xdp-drv pps pkts 1.00 rx 855,582 5,404,523 tx 0 0 XDP_REDIRECT (samples/bpf/xdp_redirect) eth2->eth1 613,267 rx/s 0 err,drop/s 613,272 xmit/s Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Add XDP RX supportGerhard Engleder
If BPF program is set up, then run BPF program for every received frame and execute the selected action. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Add RX queue info for XDP supportGerhard Engleder
Register xdp_rxq_info with page_pool memory model. This is needed for XDP buffer handling. Additionally fix error path by removing call of tsnep_phy_close() after failed tsnep_phy_open(). Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Prepare RX buffer for XDP supportGerhard Engleder
Always reserve XDP_PACKET_HEADROOM in front of RX buffer. Similar DMA direction is always set to DMA_BIDIRECTIONAL. This eliminates the need for RX queue reconfiguration during BPF program setup. The RX queue is always prepared for XDP. No negative impact of DMA_BIDIRECTIONAL was measured. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Subtract TSNEP_RX_INLINE_METADATA_SIZE onceGerhard Engleder
Subtract size of metadata in front of received data only once. This simplifies the RX code. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Add XDP TX supportGerhard Engleder
Implement ndo_xdp_xmit() for XDP TX support. Support for fragmented XDP frames is included. Also some braces and logic cleanups are done in normal TX path to keep both TX paths in sync. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Do not print DMA mapping errorGerhard Engleder
Printing in data path shall be avoided. DMA mapping error is already counted in stats so printing is not necessary. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Forward NAPI budget to napi_consume_skb()Gerhard Engleder
NAPI budget must be forwarded to napi_consume_skb(). It is used to detect non-NAPI context. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Replace TX spin_lock with __netif_tx_lockGerhard Engleder
TX spin_lock can be eliminated, because the normal TX path is already protected with __netif_tx_lock and this lock can be used for access to queue outside of normal TX path too. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-02tsnep: Rework RX buffer allocationGerhard Engleder
Refill RX queue in batches of descriptors to improve performance. Refill is allowed to fail as long as a minimum number of descriptors is active. Thus, a limited number of failed RX buffer allocations is now allowed for normal operation. Previously every failed allocation resulted in a dropped frame. If the minimum number of active descriptors is reached, then RX buffers are still reused and frames are dropped. This ensures that the RX queue never runs empty and always continues to operate. Prework for future XDP support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-02tsnep: Throttle interruptsGerhard Engleder
Without interrupt throttling, iperf server mode generates a CPU load of 100% (A53 1.2GHz). Also the throughput suffers with less than 900Mbit/s on a 1Gbit/s link. The reason is a high interrupt load with interrupts every ~20us. Reduce interrupt load by throttling of interrupts. Interrupt delay default is 64us. For iperf server mode the CPU load is significantly reduced to ~20% and the throughput reaches the maximum of 941MBit/s. Interrupts are generated every ~140us. RX and TX coalesce can be configured with ethtool. RX coalesce has priority over TX coalesce if the same interrupt is used. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-22tsnep: Fix rotten packetsGerhard Engleder
If PTP synchronisation is done every second, then sporadic the interval is higher than one second: ptp4l[696.582]: master offset -17 s2 freq -1891 path delay 573 ptp4l[697.582]: master offset -22 s2 freq -1901 path delay 573 ptp4l[699.368]: master offset -1 s2 freq -1887 path delay 573 ^^^^^^^ Should be 698.582! This problem is caused by rotten packets, which are received after polling but before interrupts are enabled again. This can be fixed by checking for pending work and rescheduling if necessary after interrupts has been enabled again. Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20221119211825.81805-1-gerhard@engleder-embedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-30tsnep: Use page pool for RXGerhard Engleder
Use page pool for RX buffer handling. Makes RX path more efficient and is required prework for future XDP support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30tsnep: Add EtherType RX flow classification supportGerhard Engleder
Received Ethernet frames are assigned to first RX queue per default. Based on EtherType Ethernet frames can be assigned to other RX queues. This enables processing of real-time Ethernet protocols on dedicated RX queues. Add RX flow classification interface for EtherType based RX queue assignment. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30tsnep: Support multiple TX/RX queue pairsGerhard Engleder
Support additional TX/RX queue pairs if dedicated interrupt is available. Interrupts are detected by name in device tree. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30tsnep: Move interrupt from device to queueGerhard Engleder
For multiple queues multiple interrupts shall be used. Therefore, rework global interrupt to per queue interrupt. Every interrupt name shall contain interface name and queue information. To get a valid interface name, the interrupt request needs to by done during open like in other drivers. Additionally, this allows the removal of some initialisation checks in the interrupt handler. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22tsnep: Record RX queueGerhard Engleder
Other drivers record RX queue so it should make sense to do that also. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22tsnep: Support full DMA maskGerhard Engleder
DMA addresses up to 64bit are supported by the device. Configure DMA mask according to the capabilities of the device. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22tsnep: Improve TX length handlingGerhard Engleder
TX length can by calculated more efficient during map and unmap of fragments. Another reason is that, by moving TX statistic counting to tsnep_tx_poll() it can be used there for XDP too. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22tsnep: Add loopback supportGerhard Engleder
Add support for NETIF_F_LOOPBACK feature. Loopback mode is used for testing. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08tsnep: Fix tsnep_tx_unmap() error path usageGerhard Engleder
If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write index like tsnep_tx_map(). This is different to the normal operation. Thus, add an additional parameter to tsnep_tx_unmap() to enable start at different positions for successful TX and failed TX. Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08tsnep: Fix unused warning for 'tsnep_of_match'Gerhard Engleder
Kernel test robot found the following warning: drivers/net/ethernet/engleder/tsnep_main.c:1254:34: warning: 'tsnep_of_match' defined but not used [-Wunused-const-variable=] of_match_ptr() compiles into NULL if CONFIG_OF is disabled. tsnep_of_match exists always so use of of_match_ptr() is useless. Fix warning by dropping of_match_ptr(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-10tsnep: Add free running cycle counter supportGerhard Engleder
The TSN endpoint Ethernet MAC supports a free running counter additionally to its clock. This free running counter can be read and hardware timestamps are supported. As the name implies, this counter cannot be set and its frequency cannot be adjusted. Add free running cycle counter support based on this free running counter to physical clock. This also requires hardware time stamps based on that free running counter. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-22tsnep: Remove useless null check before call of_node_put()Haowen Bai
No need to add null check before call of_node_put(), since the implementation of of_node_put() has done it. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1650509283-26168-1-git-send-email-baihaowen@meizu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25tsnep: Add missing of_node_put() in tsnep_mdio_init()Yang Yingliang
The node pointer is returned by of_get_child_by_name() with refcount incremented in tsnep_mdio_init(). Calling of_node_put() to aovid the refcount leak in tsnep_mdio_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211124084048.175456-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24tsnep: Fix resource_size cocci warningGerhard Engleder
The following warning is fixed, by removing the unused resource size: drivers/net/ethernet/engleder/tsnep_main.c:1155:21-24: WARNING: Suspicious code. resource_size is maybe missing with io Reported-by: kernel test robot <lkp@intel.com> Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20211124205225.13985-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24tsnep: fix platform_no_drv_owner.cocci warningYang Li
Remove .owner field if calls are used which set it automatically Eliminate the following coccicheck warning: ./drivers/net/ethernet/engleder/tsnep_main.c:1263:3-8: No need to set .owner here. The core will do it. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/1637721384-70836-2-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-23tsnep: Fix set MAC addressGerhard Engleder
Commit 4dfb9982644b ("tsn: Fix build.") fixed compilation with const dev_addr. In tsnep_netdev_set_mac_address() the call of ether_addr_copy() was replaced with dev_set_mac_address(), which calls ndo_set_mac_address(). This results in an endless recursive loop because ndo_set_mac_address is set to tsnep_netdev_set_mac_address. Call eth_hw_addr_set() instead of dev_set_mac_address() in ndo_set_mac_address()/tsnep_netdev_set_mac_address() to copy the address as intended. [ 26.563303] Insufficient stack space to handle exception! [ 26.563312] ESR: 0x96000047 -- DABT (current EL) [ 26.563317] FAR: 0xffff80000a507fc0 [ 26.563320] Task stack: [0xffff80000a508000..0xffff80000a50c000] [ 26.563324] IRQ stack: [0xffff80000a0c0000..0xffff80000a0c4000] [ 26.563327] Overflow stack: [0xffff00007fbaf2b0..0xffff00007fbb02b0] [ 26.563333] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60 [ 26.563340] Hardware name: TSN endpoint (DT) [ 26.563343] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 26.563351] pc : inetdev_event+0x4/0x560 [ 26.563364] lr : raw_notifier_call_chain+0x54/0x78 [ 26.563372] sp : ffff80000a508040 [ 26.563374] x29: ffff80000a508040 x28: ffff00000132b800 x27: 0000000000000000 [ 26.563386] x26: 0000000000000000 x25: ffff800000ea5058 x24: 0904030201020001 [ 26.563396] x23: ffff800000ea5058 x22: ffff80000a5080e0 x21: 0000000000000009 [ 26.563405] x20: 00000000fffffffa x19: ffff80000a009510 x18: 0000000000000000 [ 26.563414] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffd1341030 [ 26.563422] x14: ffffffffffffffff x13: 0000000000000020 x12: 0101010101010101 [ 26.563432] x11: 0000000000000020 x10: 0101010101010101 x9 : 7f7f7f7f7f7f7f7f [ 26.563441] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff30677364 x6 : 0000000080808080 [ 26.563450] x5 : 0000000000000000 x4 : ffff800008dee170 x3 : ffff80000a50bd42 [ 26.563459] x2 : ffff80000a5080e0 x1 : 0000000000000009 x0 : ffff80000a0092d0 [ 26.563470] Kernel panic - not syncing: kernel stack overflow [ 26.563474] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60 [ 26.563481] Hardware name: TSN endpoint (DT) [ 26.563484] Call trace: [ 26.563486] dump_backtrace+0x0/0x1b0 [ 26.563497] show_stack+0x18/0x68 [ 26.563504] dump_stack_lvl+0x68/0x84 [ 26.563513] dump_stack+0x18/0x34 [ 26.563519] panic+0x164/0x324 [ 26.563524] nmi_panic+0x64/0x98 [ 26.563533] panic_bad_stack+0x108/0x128 [ 2k6.563539] handle_bad_stack+0x38/0x68 [ 26.563548] __bad_stack+0x88/0x8c [ 26.563553] inetdev_event+0x4/0x560 [ 26.563560] call_netdevice_notifiers_info+0x58/0xa8 [ 26.563569] dev_set_mac_address+0x78/0x110 [ 26.563576] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] [ 26.563591] dev_set_mac_address+0xc4/0x110 [ 26.563599] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] ... [ 26.565444] dev_set_mac_address+0xc4/0x110 [ 26.565452] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] [ 26.565462] dev_set_mac_address+0xc4/0x110 [ 26.565469] dev_set_mac_address_user+0x44/0x68 [ 26.565477] dev_ifsioc+0x30c/0x568 [ 26.565483] dev_ioctl+0x124/0x3f0 [ 26.565489] sock_do_ioctl+0xb4/0xf8 [ 26.565497] sock_ioctl+0x2f4/0x398 [ 26.565503] __arm64_sys_ioctl+0xa8/0xe8 [ 26.565511] invoke_syscall+0x44/0x108 [ 26.565520] el0_svc_common.constprop.3+0x94/0xf8 [ 26.565527] do_el0_svc+0x24/0x88 [ 26.565534] el0_svc+0x20/0x50 [ 26.565541] el0t_64_sync_handler+0x90/0xb8 [ 26.565548] el0t_64_sync+0x180/0x184 [ 26.565556] SMP: stopping secondary CPUs [ 26.565622] Kernel Offset: disabled [ 26.565624] CPU features: 0x0,00004002,00000846 [ 26.565628] Memory Limit: none [ 27.843428] ---[ end Kernel panic - not syncing: kernel stack overflow ]--- Fixes: 4dfb9982644b ("tsn: Fix build.") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22tsn: Fix build.David S. Miller
Due to const dev_addr changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22tsnep: Add TSN endpoint Ethernet MAC driverGerhard Engleder
The TSN endpoint Ethernet MAC is a FPGA based network device for real-time communication. It is integrated as Ethernet controller with ethtool and PTP support. For real-time communcation TC_SETUP_QDISC_TAPRIO is supported. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 03:42:27 +0000