summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/emulex
AgeCommit message (Collapse)Author
2014-12-26net: Generalize ndo_gso_check to ndo_features_checkJesse Gross
GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert <therbert@google.com> CC: Joe Stringer <joestringer@nicira.com> CC: Eric Dumazet <edumazet@google.com> CC: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Tom Herbert <therbert@google.com> Fixes: 04ffcb255f22 ("net: Add ndo_gso_check") Tested-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18be2net: Fix incorrect setting of tunnel offload flag in netdev featuresSriharsha Basavapatna
An earlier commit to resolve an issue with encapsulation offloads missed setting a bit in the outer netdev features flag. This results in loss of TSO feature on a VxLAN interface. Fixes: 630f4b70 ("Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11be2net: Export tunnel offloads only when a VxLAN tunnel is createdSriharsha Basavapatna
The encapsulated offload flags shouldn't be unconditionally exported to the stack. The stack expects offloading to work across all tunnel types when those flags are set. This would break other tunnels (like GRE) since be2net currently supports tunnel offload for VxLAN only. Also, with VxLANs Skyhawk-R can offload only 1 UDP dport. If more than 1 UDP port is added, we should disable offloads in that case too. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08ethtool: Support for configurable RSS hash functionEyal Perry
This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08emulex: Use skb_put_padto instead of skb_padto() and skb->len assignmentAlexander Duyck
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02bridge: add brport flags to dflt bridge_getlinkScott Feldman
To allow brport device to return current brport flags set on port. Add returned flags to nested IFLA_PROTINFO netlink msg built in dflt getlink. With this change, netlink msg returned for bridge_getlink contains the port's offloaded flag settings (the port's SELF settings). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-11-26net: Check for presence of IFLA_AF_SPECThomas Graf
ndo_bridge_setlink() is currently only called on the slave if IFLA_AF_SPEC is set but this is a very fragile assumption and may change in the future. Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: Validate IFLA_BRIDGE_MODE attribute lengthThomas Graf
Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: a77dcb8c8 ("be2net: set and query VEB/VEPA mode of the PF interface") Fixes: 815cccbf1 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ieee802154/fakehard.c A bug fix went into 'net' for ieee802154/fakehard.c, which is removed in 'net-next'. Add build fix into the merge from Stephen Rothwell in openvswitch, the logging macros take a new initial 'log' argument, a new call was added in 'net' so when we merge that in here we have to explicitly add the new 'log' arg to it else the build fails. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: rename __vlan_put_tag to vlan_insert_tag_set_protoJiri Pirko
Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16be2net:use netdev_rss_key_fill() helperEric Dumazet
Use netdev_rss_key_fill() helper, as it provides better support for some bonding setups. Rename rss_hkey local variable to rss_key to have consistent name among drivers. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14be2net: Implement ndo_gso_check()Joe Stringer
Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Sathya Perla <sperla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: fix alignment on line wrapKalesh AP
This patch fixes alignment whereever it doesn't match the open parenthesis alignment. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove multiple assignments on a single lineKalesh AP
This patch removes multiple assignments on a single line as warned by checkpatch. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove space after typecastsKalesh AP
This patch removes unnecessary spaces after typecasts as per checkpatch warnings. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove unnecessary blank lines after an open braceKalesh AP
This patch fixes checkpatch warnings about blank lines after an open brace '{'. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: insert a blank line after function/struct//enum definitionsKalesh AP
This patch inserts a blank line after function/struct/union/enum definitions as per checkpatch warnings. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove multiple blank linesKalesh AP
This patch removes multiple blank lines in the driver as per checkpatch warnings. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: add blank line after declarationsKalesh AP
This patch fixes checkpatch warnings in be2net by adding a blank line between declaration and code blocks. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove return statements for void functionsKalesh AP
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: add speed reporting for 20G-KR interfaceVasundhara Volam
This patch adds speed reporting via ethtool for 20G KR2 interface on the Skyhawk-R chip. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: add speed reporting for 40G/KR interfaceKalesh AP
This patch adds speed reporting via ethtool for 40Gbps KR4 interface on the Skyhawk-R chip. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: fix sparse warnings in be_cmd_req_port_type{}Suresh Reddy
This patch fixes a sprase warnings regarding endian declarations introduced by the following commit: fixes: e36edd9 ("be2net: add ethtool "-m" option support") Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: fix a sparse warning in be_cmd_modify_eqd()Kalesh AP
This patch fixes a sparse warning about missing static declaration that was introduced by the following commit: fixes: 936767039cdf ("be2net: send a max of 8 EQs to be_cmd_modify_eqd() on Lancer") Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: enable PCIe error reporting on VFs tooKalesh AP
Currently PCIe error reporting is enabled only on PFs. This patch enables this feature on VFs too as Lancer VFs support it. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: send a max of 8 EQs to be_cmd_modify_eqd() on LancerKalesh AP
The MODIFY_EQ_DELAY FW cmd on Lancer is supported for a max of 8 EQs per cmd. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: fix port-type reporting in get_settingsRavikumar Nelavelli
Report the ethtool port-type/supported/advertising values based on the cable_type for QSFP and SFP+ interfaces. The cable_type is parsed from the transceiver data fetched from the FW. Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com> Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: add ethtool "-m" option supportMark Leonard
This patch adds support for the dump-module-eeprom and module-info ethtool options. Signed-off-by: Mark Leonard <mark.leonard@emulex.com> Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: use v1 of SET_FLOW_CONTROL commandSuresh Reddy
In some configurations the FW doesn't allow changing flow control settings of a link. Unless a v1 version of the SET_FLOW_CONTROL cmd is used, the FW doesn't report an error to the driver. Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: fix RX fragment posting for jumbo framesAjit Khaparde
In the RX path, the driver currently consumes upto 64 (budget) packets in one NAPI sweep. When the size of the packet received is larger than a fragment size (2K), more than one fragment is consumed for each packet. As the driver currently posts a max of 64 fragments, all the consumed fragments may not be replenished. This can cause avoidable drops in RX path. This patch fixes this by posting a max(consumed_frags, 64) frags. This is done only when there are atleast 64 free slots in the RXQ. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: replace strcpy with strlcpyVasundhara Volam
Replace strcpy with strlcpy, as it avoids a possible buffer overflow. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: fix some log messagesVasundhara Volam
This patch fixes the following minor issues with log messages in be2net: 1) Period is not required at the end of log message. 2) Remove "Unknown grp5 event" logs to reduce noise. The driver can safely ignore async events from FW it's not interested in. 3) Reword a log message for better readability to say that SRIOV "is disabled" rather than "not supported". Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: query max_tx_qs for BE3 super-nic profile from FWSuresh Reddy
In the BE3 super-nic profile, the max_tx_qs value can vary for each function. So the driver needs to query this value from FW instead of using the pre-defined constant BE3_MAX_TX_QS. Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: define macro for_all_tx_queues_on_eq()Sathya Perla
Replace the for() loop that traverses all the TX queues on an EQ with the macro for_all_tx_queues_on_eq(). With this expalnatory name, the one line comment is not required anymore. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: get rid of TX budgetSathya Perla
Enforcing a budget on the TX completion processing in NAPI doesn't benefit performance in anyway. Just get rid of it. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: make be_cmd_get_regs() return a statusVasundhara Volam
There are a few failure cases in be_cmd_get_regs() that ideally must return an error value. This style is used across all the routines in be_cmds.c with this routine being an exception. This patch fixes this. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: define BE_MAX_MTUKalesh AP
This patch defines a new macro BE_MAX_MTU to make the code in be_change_mtu() more readable. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: remove unncessary gotosKalesh AP
In cases where there is no extra code to handle an error, this patch replaces gotos with a direct return statement. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: fix log messages in lancer FW download pathKalesh AP
Log messages in the Lancer FW download path have issues such as: - a single message spanning multiple lines - the success message is logged even in failure cases - status codes are already logged in the FW cmd routines This patch fixes these issues. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: Add a dma_mapping_error counter in ethtoolVasundhara Volam
Add a dma_mapping_error counter to count the number of packets dropped due to DMA mapping errors. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: Add TX completion error statistics in ethtoolKalesh AP
HW reports TX completion errors in TX completion. This patch adds these counters to ethtool statistics. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: add a description for counter rx_input_fifo_overflow_dropSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: shorten AMAP_GET/SET_BITS() macro callsSathya Perla
The AMAP_GET/SET_BITS() macro calls take structure name as a parameter and hence are long and span more than one line. Replace these calls with a wrapper macros for RX/Tx compls and TX wrb. This results in fewer lines and more readable code in be_main.c Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02be2net: add a few log messagesSathya Perla
This patch adds the following log messages to help debugging failure cases: 1) log FW version number: this is useful when driver initialization fails and the FW version number cannot be queried via ethtool 2) per function resource limits for BEx chips: these values are currently being printed only for Skyhawk and Lancer 3) PCI BAR mapping failure 4) function_mode/caps queried from FW: this helps catch any FW bugs that could advertise wrong capabilities to the driver Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29benet: Set skb->csum_level for encapsulated checksumTom Herbert
Set skb->csum_level instead of skb->encapsulation when indicating CHECKSUM_UNNECESSARY for an encapsulated checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29be2net: Use dev_consume_skb_any() in the non-drop pathRick Jones
The be2net driver was still using dev_kfree_skb_any() in a "normal" skb freeing path. This rather clutters perf top -G -e skb_kfree_skb profiling. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-14Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: "Main set of InfiniBand/RDMA updates for 3.17 merge window: - MR reregistration support - MAD support for RMPP in userspace - iSER and SRP initiator updates - ocrdma hardware driver updates - other fixes..." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits) IB/srp: Fix return value check in srp_init_module() RDMA/ocrdma: report asic-id in query device RDMA/ocrdma: Update sli data structure for endianness RDMA/ocrdma: Obtain SL from device structure RDMA/uapi: Include socket.h in rdma_user_cm.h IB/srpt: Handle GID change events IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0] IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0] RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf() IPoIB: Remove unnecessary test for NULL before debugfs_remove() IB/mad: Add user space RMPP support IB/mad: add new ioctl to ABI to support new registration options IB/mad: Add dev_notice messages for various umad/mad registration failures IB/mad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid multicast join attempts with invalid P_key IB/umad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid flushing the workqueue from worker context IB/ipoib: Use P_Key change event instead of P_Key polling mechanism IB/ipath: Add P_Key change event support mlx4_core: Add support for secure-host and SMP firewall ...
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 19:33:46 +0000