summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/emulex/benet/be_cmds.c
AgeCommit message (Collapse)Author
2014-05-30be2net: re-factor MCCQ error status handling codeKalesh AP
This patch improves MCCQ error status handling in the following ways: a) A MCC cmd completion returns a base-status and an addl-status. So far, the routine be_mcc_compl_process() returned only the "status" value. Now, embedd both statuses in the return value and let the caller routine access the value of interest using base_status() and addl_status() macros. b) Rename variables accordingly (base/addl) to avoid confusion while error checking. b) Some of the errors returned by FW are harmless and so an error msg is not logged for such errors. Capture this logic in a separate routine to make the code more readable. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30be2net: support flashing new regions on Skyhawk-RVasundhara Volam
Certain new flash regions have been added to Skyhawk-R FW image. The newer FW images specify op_types for each region. A region is flashed only when it's CRC doesn't match that of the region on the HW flash. While upgrading to a new FW image the driver is expected to tolerate certain errors. This patch re-factors code under be_flash() to support the above scheme. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30be2net: fixup TX-rate setting code for Skyhawk-RRavikumar Nelavelli
Skyhawk-R FW supports TX-rate setting only as a % value of the link speed, set via the SET_PROFILE_CONFIG cmd. This patch makes the necessary changes to the FW cmd descriptors to support the above change and also introduces checks in be_set_vf_tx_rate() to allow only discrete values (that map to % of the link-speed). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-19ethtool, be2net: constify array pointer parameters to ethtool_ops::set_rxfhBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-05-09be2net: use MCCQ instead of MBOX in be_cmd_rss_config()Kalesh AP
be_cmd_rss_config() is called after the MCCQ is created; so this cmd is now modified to use the MCCQ instead of MBOX. Also fixed some indentation problem in this routine. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: remove unused code in be_cmd_vlan_config()Kalesh AP
For putting interface into vlan promiscuous mode, we use be_cmd_rx_filter() and not be_cmd_vlan_config(). So remove the "promiscuous" argument from be_cmd_vlan_config(). Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: fix function call indentation in be_cmds.cSathya Perla
When a funtion definition or a function call spans more than one line, ensure that the first argument on the subsequent lines is aligned to the first column after the opening paranthesis of the function call. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22be2net: Support for configurable RSS hash keyVenkata Duvvuru
This be2net patch implements the get/set_rxfh() ethtool hooks. RSS_CONFIG device command is invoked to set hashkey and indirection table. It also uses an initial random value for RSS hash key instead of a hard-coded value as hard-coded values for a hash-key are usually considered a security risk. Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28be2net: add FW cmds needed for VxLAN offloadsSathya Perla
This patch adds support for the FW cmds needed for VxLAN offloads on Skyhawk-R: 1) The VxLAN UDP port needs to be configured via the port-desc of SET_PROFILE_CONFIG_v1 cmd. This patch re-factors the be_set_profile_config() code (used so far only for setting VF QoS) to be used to set any type of descriptor. 2) The MANAGE_IFACE_FILTERS cmds is needed to convert a normal interface into a tunnel interface. This allows for RSS to work even on the inner TCP/UDP headers of VxLAN traffic. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12be2net: log LPVID used in multi-channel configsRavikumar Nelavelli
Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12be2net: Add link state control for VFsSuresh Reddy
Add support to control VF's link state by implementing the ndo_set_vf_link_state() hook. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13be2net: refactor multi-channel config code for Skyhawk-R chipVasundhara Volam
Currently multi-channel configuration is read via the QUERY_FW_CONFIG cmd. This method has been deprecated by the Skyhawk-R FW. Instead, GET_PROFILE_CONFIG::port-desc must be used to query this configuration. This patch also: a) introduces a few macros to identify certain categories of multi-channel configs 2) re-factors the be_cmd_set_profile_config() code to be able to read any kind of desc (and not just the nic-desc.) Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13be2net: Update copyright yearVasundhara Volam
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: cleanup wake-on-lan codeSuresh Reddy
This patch cleans-up wake-on-lan code in the following ways: 1) Removes some driver hacks in be_cmd_get_acpi_wol_cap() that were based on incorrect assumptions. 2) Uses the adapter->wol_en and wol_cap variables for checking if WoL is supported and enabled on an interface instead of referring to the exclusion list via the macro be_is_wol_supported() Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: use GET_MAC_LIST cmd to query mac-address from a pmac-idSuresh Reddy
The use of NTKW_MAC_QUERY cmd has been deprecated for Skyhawk-R. Replace the last remaining usage in be_vfs_mac_query() routine. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: fix incorrect setting of cmd_privileges for VFsSuresh Reddy
An earlier commit (f25b119c "Fix error messages while driver load for VFs") incorrectly set the adapter->cmd_privileges value for VFs (in a multi-channel config) to MAX_PRIVILEGES. This causes FW cmd failures and avoidable error logs when certian cmds are issued by a VF. Also, move the multi-channel hack to be_cmds.c inside be_cmd_get_fn_privileges() routine. Fixes: f25b119c "Fix error messages while driver load for VFs" Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: do not call be_set/get_fw_log_level() on Skyhawk-RVasundhara Volam
Skyhawk-R FW does not support SET/GET_EXT_FAT_CAPABILITIES cmds via which FW logging level can be controlled. Also, the hack used in BE3 to control FW logging level via the ethtool interface is not needed in Skyhawk-R. This patch also cleans up this code by moving be_set/get_fw_log_level() routines to be_cmds.c where they belong. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> remove new line Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: Log the profile-id used by FW during driver initializationVasundhara Volam
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: don't set "pport" field when querying "pvid"Vasundhara Volam
In the GET_HSW_CONFIG cmd, the "pport" field must be set only while querying the switch mode. When the "pport" field is set, the "interface_id" field must be set to the port number, otherwise, it must be set to adapter->if_handle. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: Use MCC_CREATE_EXT_V1 cmd for Skyhawk-RVasundhara Volam
Currently this cmd is used only for Lancer. MCC_CREATE_EXT_V1 supports larger CQ-ids and additional event codes for the async_event_bitmap field. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: increase the timeout value for loopback-test FW cmdSuresh Reddy
The loopback test FW cmd may need upto 15 seconds to complete on certain PHYs. This patch also fixes the name of the completion variable used to synchronize FW cmd completions as it not used by the flashing cmd alone anymore. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: disable RSS when number of RXQs is reduced to 1 via set-channelsVasundhara Volam
When *only* the default RXQ is used, the RSS policy must be disabled so that all IP and no-IP traffic is placed into the default RXQ. If not, IP traffic is dropped. Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for the interface. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23be2net: set coalesce-wm in CQ_CREATE_V2 cmdAjit Khaparde
It is not being set currently. (This field is not applicable for Lancer) Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18be2net: Fix unconditional enabling of Rx interface optionsAjit Khaparde
The driver currently requests the firmware to enable rx_interface options without considering if the interface was created with that capability. This could cause commands to firmware to fail. To avoid this, enable only those options on an interface if the interface was created with that capability. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net/benet: Make lancer_wait_ready() staticGavin Shan
The function needn't to be public, so to make it as static. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09be2net: Call version 2 of GET_STATS ioctl for Skyhawk-RAjit Khaparde
Moving to version 2 of GET_STATS command as SkyHawk-R supports higher number of rings. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be.h drivers/net/usb/qmi_wwan.c drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h include/net/netfilter/nf_conntrack_synproxy.h include/net/secure_seq.h The conflicts are of two varieties: 1) Conflicts with Joe Perches's 'extern' removal from header file function declarations. Usually it's an argument signature change or a function being added/removed. The resolutions are trivial. 2) Some overlapping changes in qmi_wwan.c and be.h, one commit adds a new value, another changes an existing value. That sort of thing. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: fix adaptive interrupt coalescingSathya Perla
The current EQ delay calculation for AIC is based only on RX packet rate. This fails to be effective when there's only TX and no RX. This patch inclues: - Calculating EQ-delay based on both RX and TX pps. - Modifying EQ-delay of all EQs via one cmd, instead of issuing a separate cmd for each EQ. - A new structure to store interrupt coalescing parameters, in a separate cache-line from the EQ-obj. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: call ENABLE_VF cmd for Skyhawk-R tooVasundhara Volam
This cmd needs to be sent to FW when enabling VFs (currently used only for Lancer.) Also, avoid calling the cmd when driver loads and finds that VFs are already enabled from a previous load. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: pass if_id for v1 and V2 versions of TX_CREATE cmdVasundhara Volam
It is a required field for all TX_CREATE cmd versions > 0. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix VLAN promiscuous mode programmingAjit Khaparde
When the interface runs out of the allocated entries in VLAN table, we program the interface in VLAN promiscuous mode. Use OPCODE_COMMON_NTWK_RX_FILTER to set VLAN Promiscuous mode instead of OPCODE_COMMON_NTWK_VLAN_CONFIG. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03be2net: set and query VEB/VEPA mode of the PF interfaceAjit Khaparde
SkyHawk-R can support VEB or VEPA mode. This patch will allow the user to set/query this switch setting. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: refactor be_setup() to consolidate queue creation routinesSathya Perla
1) Move be_cmd_if_create() above queue create routines to allow TXQ creation (that requires if_handle) to be clubbed with TX-CQ creation. 2) Consolidate all queue create routines into be_setup_queues() Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: Fix be_cmd_if_create() to use MBOX if MCCQ is not createdSathya Perla
Currently the IF_CREATE FW cmd is issued only *after* MCCQ is created as it was coded to only use MCCQ. By fixing this, cmd_if_create() can be called before MCCQ is created and the same routine for VF provisioning can be called after. This allows for consolidating all the queue create routines by moving the be_cmd_if_create() call above all queue create calls in be_setup(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: refactor be_get_resources() codeSathya Perla
1) use be_resources{} struct to query/store HW resource limits 2) The HW queue/resource limits for BE2/BE3 chips are mostly called out in driver as constants. Code to handle this is scattered across various places in be_setup(). Consolidate this code into BEx_get_resources(). For Lancer-R, Skyhawk-R, these limits are queried from FW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: Fixup profile management routinesVasundhara Volam
1) Parse PCIe descriptor for max-VFs supported by HW 2) Cleanup NIC descriptor parsing in get_func/profile_config() routines 3) Use common struct definitions for v0 and v1 versions of GET_FUNC_CONFIG Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: use EQ_CREATEv2 for SH-RSathya Perla
EQ_CREATEv2 explicitly returns the msix-index associated with a EQ. For SH-R this is needed if EQs need to be deleted and re-created without resetting a function. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2013-08-15be2net: Clear any capability flags that driver is not interested in.Sarveshwar Bandi
It is possible for some versions of firmware to advertise capabilities that driver is not ready to handle. This may lead to controller stall. Since the driver is interested only in subset of flags, clearing the rest. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Initialize "status" in be_cmd_get_die_temperature()Vasundhara Volam
Uninitialized value was being returned in the non-failure case. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: fixup log msgs for async eventsVasundhara Volam
Log the event type for unknown async events Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Fix displaying supported speeds for BE2Vasundhara Volam
The BE2 FW GET_PHY_DETAILS cmd does not return fixed speeds supported. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Adding more speeds reported by get_settingsVasundhara Volam
The new speeds are supported by variants of the Skyhawk-R chip. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05be2net: Staticize local functionsJingoo Han
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:475:6: warning: symbol 'populate_erx_stats' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:1485:6: warning: symbol 'be_rx_compl_process_gro' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:2262:5: warning: symbol 'be_poll' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3223:6: warning: symbol 'flash_cookie' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3280:27: warning: symbol 'get_fsec_info' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1013:5: warning: symbol 'be_cmd_mccq_ext_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1071:5: warning: symbol 'be_cmd_mccq_org_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3166:5: warning: symbol 'be_cmd_get_profile_config_mbox' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3194:5: warning: symbol 'be_cmd_get_profile_config_mccq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:96:6: warning: symbol '_be_roce_dev_remove' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:113:6: warning: symbol '_be_roce_dev_open' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:129:6: warning: symbol '_be_roce_dev_close' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: use SET/GET_MAC_LIST for SH-RSathya Perla
On SH-R and Lancer-R, GET_MAC_LIST cmd is better supported (instead of NTWK_MAC_QUERY cmd) to query provisioned MAC addresses. Similiarly, (on SH-R and Lancer-R) SET_MAC_LIST must be used by the PF to provision a permanent MAC addresses to the VF. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: refactor MAC-addr setup codeSathya Perla
The code to configure the permanent MAC in be_setup() has become quite complicated, with different FW cmds being used for BEx, SH-R and Lancer. Simplify the logic by moving some of this complexity to be_cmds.c. This makes the code in be_setup() a little more readable. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: fix pmac_id for BE3 VFsSathya Perla
For BE3 VFs, the permanent MAC is added by its PF. The VF can retrieve its pmac_id only via the IFACE_CREATE cmd. This is not true for Lancer and SH-R VFs which get the pmac_id by issuing a ADD_IFACE_MAC cmd. So, use this hack only for BE3 VFs. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: allow VFs to program MAC and VLAN filtersSathya Perla
In the current design VFs were not allowed to program MAC/VLAN filters. Only the PF driver was allowed to configure/provision MAC and transparent VLANs to a VF. Change this to support MAC/VLAN filtering on a VF by a VM. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: fix MAC address modification for VFSathya Perla
Currently, the VFs by default don't have the privilege to modify MAC address. This will change in a subsequent fix wherein VFs will have the ability to modify MAC/VLAN filters. Fix be_mac_addr_set() logic to support MAC address modification on a privileged VF too. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge 'net' bug fixes into 'net-next' as we have patches that will build on top of them. This merge commit includes a change from Emil Goode (emilgoode@gmail.com) that fixes a warning that would have been introduced by this merge. Specifically it fixes the pingv6_ops method ipv6_chk_addr() to add a "const" to the "struct net_device *dev" argument and likewise update the dummy_ipv6_chk_addr() declaration. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 09:41:22 +0000