summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cisco
AgeCommit message (Collapse)Author
2014-06-23enic: alloc/free rx_cpu_rmapGovindarajulu Varadarajan
rx_cpu_rmap provides the reverse irq cpu affinity. This patch allocates and sets drivers netdev->rx_cpu_rmap accordingly. rx_cpu_rmap is set in enic_request_intr() which is called by enic_open and rx_cpu_rmap is freed in enic_free_intr() which is called by enic_stop. This is used by Accelerated RFS. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: devcmd for adding IP 5 tuple hardware filtersGovindarajulu Varadarajan
This patch adds interface to add and delete IP 5 tuple filter. This interface is used by Accelerated RFS code to steer a flow to corresponding receive queue. As of now adaptor supports only ipv4 + tcp/udp packet steering. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: fix return value in _vnic_dev_cmdGovindarajulu Varadarajan
Hardware (in readq(&devcmd->args[0])) returns positive number in case of error. But _vnic_dev_cmd should return a negative value in case of error. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02enic: Update driver to use __dev_uc/mc_sync/unsync callsAlexander Duyck
This change updates the enic driver to make use of __dev_uc_sync and __dev_mc_sync calls. Previously the driver was doing its own list management by storing the mc_addr and uc_addr list in a 32 address array. With this change the sync data is stored in the netdev_addr_list structures and instead we just track how many addresses we have written to the device. When we encounter 32 we stop and print a message as occurred previously with the old approach. Other than the core change the only other bit needed was to propagate the constant attribute with the MAC address as there were several spots where is twas only passed as a u8 * instead of a const u8 *. This patch is meant to maintain the original functionality without the use of the mc_addr and uc_addr arrays. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30enic: Fix 64 bit divide on 32bit systemGovindarajulu Varadarajan
Division of a 32 bit number by a 64 bit number causes the following link error introduced by 7c2ce6e60f703 "enic: Add support for adaptive interrupt coalescing" drivers/built-in.o: In function `enic_poll_msix': enic_main.c:(.text+0x48710a): undefined reference to `__udivdi3' make: *** [vmlinux] Error 1 Since numerator is 32 bit, convert denominator to 32 bit accordingly. Fixes: 7c2ce6e60f703 ("enic: Add support for adaptive interrupt coalescing") Reported-by: Jim Davis <jim.epost@gmail.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-21enic: Add support for adaptive interrupt coalescingSujith Sankar
This patch adds support for adaptive interrupt coalescing. For small pkts with low pkt rate, we can decrease the coalescing interrupt dynamically which decreases the latency. This however increases the cpu utilization. Based on testing with different coal intr and pkt rate we came up with a table(mod_table) with rx_rate and coalescing interrupt value where we get low latency without significant increase in cpu. mod_table table stores the coalescing timer percentage value for different throughputs. Function enic_calc_int_moderation() calculates the desired coalescing intr timer value. This function is called in driver rx napi_poll. The actual value is set by enic_set_int_moderation() which is called when napi_poll is complete. i.e when we unmask the rx intr. Adaptive coal intr is support only when driver is using msix intr. Because intr is not shared. Struct mod_range is used to store only the default adaptive coalescing intr value. Adaptive coal intr calue is calculated by timer = range_start + ((rx_coal->range_end - range_start) * mod_table[index].range_percent / 100); rx_coal->range_end is the rx-usecs-high value set using ethtool. range_start is rx-usecs-low, set using ethtool, if rx_small_pkt_bytes_cnt is greater than 2 * rx_large_pkt_bytes_cnt. i.e small pkts are dominant. Else its rx-usecs-low + 3. Cc: Christian Benvenuti <benve@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03net: enic: include irq.h for irqreturn_t definitionsJosh Boyer
The enic driver fails to build on ARM with: In file included from drivers/net/ethernet/cisco/enic/enic_res.c:40:0: drivers/net/ethernet/cisco/enic/enic.h:48:2: error: expected specifier-qualifier-list before 'irqreturn_t' irqreturn_t (*isr)(int, void *); ^ Nothing in the driver is explicitly including the irq definitions, so we add an include of linux/irq.h to pick them up. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24enic: Call dev_kfree_skb_any instead of dev_kfree_skb.Eric W. Biederman
Replace dev_kfree_skb with dev_kfree_skb_any in enic_hard_start_xmit that can be called in hard irq and other contexts. enic_hard_start_xmit only frees the skb when dropping it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-14enic: Don't receive packets when the napi budget == 0Eric W. Biederman
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18enic: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Cc: Neel Patel <neepatel@cisco.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31net: enic: slight optimization of addr comparedingtianhong
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18net: cisco-enic calls skb_set_hashTom Herbert
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18net: enic: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: update enic maintainers and drivergovindarajulu.v
Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Exposing symbols for Cisco's low latency drivergovindarajulu.v
This patch exposes symbols for usnic low latency driver that can be used to register and unregister vNics as well to traverse the resources on vNics. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Try DMA 64 first, then failover to DMAgovindarajulu.v
In servers with more than 1.1 TB of RAM, the existing 40/32 bit DMA could cause failure as the DMA-able address could go outside the range addressable using 40/32 bits. The following patch first tried 64 bit DMA if possible, failover to 32 bit. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: record q_number and rss_hash for skbgovindarajulu.v
The following patch sets the skb->rxhash and skb->q_number. This is used by RPS and RFS. Kernel can make use of hw provided hash instead of calculating the hash. Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Add multi tx support for enicgovindarajulu.v
The following patch adds multi tx support for enic. Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20drivers/net: enic: Generate notification of hardware crashNeel Patel
This patch generates a hardware crash notification (NETDEV_REBOOT) during reset. After a hardware crash, ENIC resets all its resources including queue pair filters programmed by USNIC. USNIC registers for this notification, and on receiving it, reprograms the queue pair filters. Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20drivers/net: enic: Add an interface for USNIC to interact with firmwareNeel Patel
This patch adds an interface for USNIC to proxy firmware commands through ENIC. Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20drivers/net: enic: Adding support for Cisco Low Latency NICNeel Patel
This patch, - Adds new firmware commands for the new Cisco Low Latency NIC (aka. USNIC). Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24drivers/net: enic: Move ethtool code to a separate fileNeel Patel
This patch moves all enic ethtool hooks from enic_main.c to a new file enic_ethtool.c Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09drivers/net: enic: release rtnl_lock on error-pathKonstantin Khlebnikov
enic_change_mtu_work() must call rtnl_unlock() on all exiting paths. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08enic: be less verbose about non-critical firmware errorsStefan Assmann
If a feature is not supported by firmware no need to print an error message. This surpresses the following harmless message on boot up and ethtool query. enic: Error 1 devcmd 36 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18enic: change sprintf() to snprintf()Dan Carpenter
These are copying data into 16 char arrays. They all specify that the first string can't be more than 11 characters but once you add on the "-rx-" and the NUL character there isn't space for the %d. The first string is probably never going to be 11 characters, but if it is then let's truncate the string instead of corrupting memory. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko
NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03enic: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-19net: Remove bogus dependencies on INETBen Hutchings
Various drivers depend on INET because they used to select INET_LRO, but they have all been converted to use GRO which has no such dependency. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10enic: remove unnecessary setting of skb->devJon Mason
skb->dev is being unnecessarily set after calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10drivers/net: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13enic: replace open-coded ARRAY_SIZE with macroJim Cromie
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02enic: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08enic: Fix addr valid check in enic_set_vf_macRoopa Prabhu
zero mac address is a valid address for VIC dynamic vnic and sriov Vf's. Fix the check in enic_set_vf_mac appropriately Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/tg3.c Conflicts in the statistics regression bug fix from 'net', but happily Matt Carlson originally posted the fix against 'net-next' so I used that to resolve this. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01enic: fix an endian bug in enic_probe()Dan Carpenter
"num_vfs" is a u32 but we only use the high 16 bits and the low 16bits are left as zero. That isn't a problem for little endian systems but it will break on big endian ones. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/sfc/rx.c Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change the rx_buf->is_page boolean into a set of u16 flags, and another to adjust how ->ip_summed is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24enic: Fix endianness bug.Santosh Nayak
Sparse complaints the endian bug. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: Add support for fw init command on sriov vf'sRoopa Prabhu
This patch fixes enic_probe to do a fw init devcmd for sriov vfs. This enables vf driver in the guest to get into adapter init state without having to explicitly issue an init fw cmd with portprofile info. But a successful init on the vf will require the port profile information to be pre-provisioned by the hypervisor via the pf Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: Fix ndo_set_vf_mac and ndo_set_vf_port to set/get the sriov vf's macRoopa Prabhu
This patch fixes the ndo_set_vf_mac netdev op to set the sriov vf mac in adapter using the new fw devcmd CMD_SET_MAC_ADDR. During port profile associate the pf driver gets the vf mac using CMD_GET_MAC_ADDR. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: Add new fw devcmd to set mac address of an interfaceRoopa Prabhu
This patch adds a new devcmd CMD_SET_MAC_ADDR to set the mac address of an interface. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: rename CMD_MAC_ADDR to CMD_GET_MAC_ADDRRoopa Prabhu
firmware devcmd CMD_MAC_ADDR gets the mac address of a vnic from adapter. This patch renames it to CMD_GET_MAC_ADDR more appropriately. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18cisco/enic: use eth_hw_addr_random() instead of random_ether_addr()Danny Kukawka
Use dev_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v3: adapt to net-next v2: use bitops, adapt to eth_hw_addr_random(), add a comment Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13enic: remove assignment of random mac on enic vfRoopa Prabhu
This patch removes random mac assignment on vf's. The vf's will start with a zero mac and with upcoming support in fw/driver, a vf mac can be set via the pf. vf's also support ndo_set_mac_address. This decision was made based on the fact that a random mac on a vf is not really needed. And this will reduce some of the problems with the vf's getting a new mac on every driver load/unload (one of them being udev renaming the device on ever load/unload and reboot). Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: sujith sankar <ssujith@cisco.com> Signed-off-by: ChingWei Chang <cwchang@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13enic: Fix address deregistration for sriov vf during port profile disassociateRoopa Prabhu
This patch fixes erroneous PF address deregistration in cases where a port profile disassociate is called on an already disassociated interface. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: sujith sankar <ssujith@cisco.com> Signed-off-by: ChingWei Chang <cwchang@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 06:09:01 +0000