summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cisco/enic/enic_main.c
AgeCommit message (Collapse)Author
2018-06-20enic: do not overwrite error codeGovindarajulu Varadarajan
In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e268509 ("enic: enable rq before updating rq descriptors") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20enic: initialize enic->rfs_h.lock in enic_probeGovindarajulu Varadarajan
lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06enic: fix UDP rss bitsGovindarajulu Varadarajan
In commit 48398b6e7065 ("enic: set UDP rss flag") driver needed to set a single bit to enable UDP rss. This is changed to two bit. One for UDP IPv4 and other bit for UDP IPv6. The hardware which supports this is not released yet. When released, driver should set 2 bit to enable UDP rss for both IPv4 and IPv6. Also add spinlock around vnic_dev_capable_rss_hash_type(). Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24enic: set DMA mask to 47 bitGovindarajulu Varadarajan
In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") DMA mask was changed from 40 bits to 64 bits. Hardware actually supports only 47 bits. Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16enic: drop IP proto check for vxlan tunnel deleteGovindarajulu Varadarajan
Commit d11790941dd3 ("enic: Add vxlan offload support for IPv6 pkts") added vxlan offload support for IPv6 pkts. Required change in enic_udp_tunnel_del was not made. This creates a bug where once user adds IPv6 tunnel, hw offload for that cannot be deleted. This patch removes check for IP proto in tunnel delete path. Driver need not check for IP proto since same UDP port cannot be used to create two tunnels. Fixes: d11790941dd3 ("enic: Add vxlan offload support for IPv6 pkts") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04enic: set IG desc cache flag in openGovindarajulu Varadarajan
New adapter needs CMD_OPENF_IG_DESCCACHE flag to be set. If this flag is not set, fw flushes the global IG desc cache. This flag is nop in older adapter. Also increment driver version Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04enic: enable rq before updating rq descriptorsGovindarajulu Varadarajan
rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04enic: set UDP rss flagGovindarajulu Varadarajan
New hardware needs UDP flag set to enable UDP L4 rss hash. Add ethtool get option to display supported rss flow hash. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04enic: Check if hw supports multi wq with vxlan offloadGovindarajulu Varadarajan
Some adaptors do not support vxlan offload when multi wq is configured. If hw supports multi wq, BIT(2) is set in a1. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04enic: Add vxlan offload support for IPv6 pktsGovindarajulu Varadarajan
New adaptors supports vxlan offload for inner IPv6 and outer IPv6 vxlan pkts. Fw sets BIT(0) & BIT(1) in a1 if hw supports ipv6 inner & outer pkt offload. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04enic: Check inner ip proto for pseudo header csumGovindarajulu Varadarajan
To compute pseudo IP header csum, we need to check the inner header for encap pkt, not outer IP header. Also add pseudo csum for IPv6 inner pkt. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26enic: add wq clean up budgetGovindarajulu Varadarajan
In case of tx clean up, we set '-1' as budget. This means clean up until wq is empty or till (1 << 32) pkts are cleaned. Under heavy load this will run for long time and cause "watchdog: BUG: soft lockup - CPU#25 stuck for 21s!" warning. This patch sets wq clean up budget to 256. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03enic: add sw timestamp supportGovindarajulu Varadarajan
Add ethtool ops to advertise sw timestamping. Call skb_tx_timestamp() just before ringing the wq doorbell. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-21drivers: net: enic: use setup_timer() helper.Allen Pais
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20enic: Fix format truncation warningGovindarajulu Varadarajan
With -Wformat-truncation, gcc throws the following warning. Fix this by increasing the size of devname to accommodate 15 character netdev interface name and description. Remove length format precision for %s. We can fit entire name. Also increment the version. drivers/net/ethernet/cisco/enic/enic_main.c: In function ‘enic_open’: drivers/net/ethernet/cisco/enic/enic_main.c:1740:15: warning: ‘%u’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 12 [-Wformat-truncation=] "%.11s-rx-%u", netdev->name, i); ^~ drivers/net/ethernet/cisco/enic/enic_main.c:1740:5: note: directive argument in the range [0, 16] "%.11s-rx-%u", netdev->name, i); ^~~~~~~~~~~~~ drivers/net/ethernet/cisco/enic/enic_main.c:1738:4: note: ‘snprintf’ output between 6 and 18 bytes into a destination of size 16 snprintf(enic->msix[intr].devname, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(enic->msix[intr].devname), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%.11s-rx-%u", netdev->name, i); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23enic: unmask intr only when napi is completeGovindarajulu Varadarajan
In case of busy poll, napi_complete_done returns false and does not dequeue napi. In this case do not unmask the intr. We are guaranteed napi is called again. This reduces unnecessary iowrites. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09enic: add vxlan offload on tx pathGovindarajulu Varadarajan
Define ndo_features_check. Hw supports offload only for ipv4 inner and ipv4 outer pkt. Code refactor for setting inner tcp pseudo csum. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09enic: add udp_tunnel ndo for vxlan offloadGovindarajulu Varadarajan
Defines enic_udp_tunnel_add/del for configuring vxlan tunnel offload. enic supports offload of only one ipv4/udp port. There are two modes that fw supports for vxlan offload. mode 0: fcoe bit is set for encapsulated packet. fcoe_fc_crc_ok is set if checksum of csum is ok. This bit is or of ip_csum_ok and tcp_udp_csum_ok mode 2: BIT(0) in rss_hash is set if it is encapsulated packet. BIT(1) is set if outer_ip_csum_ok/ BIT(2) is set if outer_tcp_csum_ok tcp_udp_csum_ok/ipv4_csum_ok is set if inner csum is OK. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03enic: Remove local ndo_busy_poll() implementation.David S. Miller
We do polling generically these days. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-02enic: set skb->hash type properlyGovindarajulu Varadarajan
Driver sets the skb l4/l3 hash based on NIC_CFG_RSS_HASH_TYPE_*, which is bit mask. This is wrong. Hw actually provides us enum. Use CQ_ENET_RQ_DESC_RSS_TYPE_* to set l3 and l4 hash type. Fixes: bf751ba802fe ("driver/net: enic: record q_number and rss_hash for skb") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: enic: use correct type specifierxypron.glpk@gmx.de
i is defined as unsigned. So print it with %u. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18enic: set netdev->vlan_featuresGovindarajulu Varadarajan
Driver sets vlan_feature to netdev->features as hardware supports all of them on vlan interface. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18net: provide generic busy polling to all NAPI driversEric Dumazet
NAPI drivers no longer need to observe a particular protocol to benefit from busy polling (CONFIG_NET_RX_BUSY_POLL=y) napi_hash_add() and napi_hash_del() are automatically called from core networking stack, respectively from netif_napi_add() and netif_napi_del() This patch depends on free_netdev() and netif_napi_del() being called from process context, which seems to be the norm. Drivers might still prefer to call napi_hash_del() on their own, since they might combine all the rcu grace periods into a single one, knowing their NAPI structures lifetime, while core networking stack has no idea of a possible combining. Once this patch proves to not bring serious regressions, we will cleanup drivers to either remove napi_hash_del() or provide appropriate rcu grace periods combining. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02enic: assign affinity hint to interruptsGovindarajulu Varadarajan
The affinity hint is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. This patch sets the irq affinity hint to local numa core first, when exausted we try non-local numa cores. Also set tx xps cpus mask bassed on affinity hint. v2: remove the global affinity policy. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: do hang reset only in case of tx timeoutGovindarajulu Varadarajan
The current code invokes hang reset in case of error interrupt. We should hang reset only in case of tx timeout. This because of the way hang reset is implemented in firmware. Hang reset takes more firmware resources than soft reset. Adaptor does not generate error interrupt in case of tx timeout. Hang reset only in case of tx timeout, in .ndo_tx_timeout. Do soft reset otherwise. Introduce deferred work, enic_tx_hang_reset, to do hang reset. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: handle spurious error interruptGovindarajulu Varadarajan
Some of the enic adaptors are know to generate spurious interrupts. When error interrupt is generated, driver just resets the device. This patch resets the device only when an error is occurred. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21enic: Fix build failure with SRIOV disabled.David S. Miller
err_out_vnic_unregister is used regardless of whether SRIOV is enabled or not. Reported-by: Jesse Brandeburg <jesse.brangeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: add devcmd2Govindarajulu Varadarajan
devcmd is an interface for driver to communicate with fw/adaptor. It involves writing data to hardware registers and waiting for the result. This mechanism does not scale well. The queuing of "no wait" devcmds is done in firmware memory rather than on the host. Firmware memory is a rather more scarce and valuable resource than host memory. A devcmd storm from one vf can disrupt the service on other pf/vf. The lack of flow control allows for possible denial of server from one VM to another. Devcmd2 uses work queue to post the devcmds, just like tx work queue. This allows better flow control. Initialize devcmd2, if fails we fall back to devcmd1. Also change the driver version. Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20enic: add adaptive coalescing intr for intx and msi pollGovindarajulu Varadarajan
Adaptive interrupt coalescing is available for msix. This patch adds the support for msi poll. Interface for adaptive interrupt coalescing is already added in driver. We just did not enable it for legacy intr & msi. enic_calc_int_moderation() & enic_set_int_moderation() are defined as static after enic_poll. Since enic_poll needs it, move both of these function definitions above enic_poll. No change in functionality. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-02enic: fix issues in enic_pollGovindarajulu Varadarajan
In enic_poll, we clean tx and rx queues, when low latency busy socket polling is happening, enic_poll will only clean tx queue. After cleaning tx, it should return total budget for re-poll. There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and fails. Unlock napi_poll before unmasking the interrupt. v2: Do not change tx wonk done behaviour. Consider only rx work done for completing napi. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25enic: use atomic_t instead of spin_lock in busy pollGovindarajulu Varadarajan
We use spinlock to access a single flag. We can avoid spin_locks by using atomic variable and atomic_cmpxchg(). Use atomic_cmpxchg to set the flag for idle to poll. And a simple atomic_set to unlock (set idle from poll). In napi poll, if gro is enabled, we call napi_gro_receive() to deliver the packets. Before we call napi_complete(), i.e while re-polling, if low latency busy poll is called, we use netif_receive_skb() to deliver the packets. At this point if there are some skb's held in GRO, busy poll could deliver the packets out of order. So we call napi_gro_flush() to flush skbs before we move the napi poll to idle. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10enic: check return value for stat dumpGovindarajulu Varadarajan
We do not check the return value of enic_dev_stats_dump(). If allocation fails, we will hit NULL pointer reference. Return only if memory allocation fails. For other failures, we return the previously recorded values. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10enic: unlock napi busy poll before unmasking intrGovindarajulu Varadarajan
There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and hits the following WARN_ON message. Fix is to unlock napi_poll before unmasking the interrupt. [ 781.121746] ------------[ cut here ]------------ [ 781.121789] WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/cisco/enic/vnic_rq.h:228 enic_poll_msix_rq+0x36a/0x3c0 [enic]() [ 781.121834] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel mgag200 ttm drm_kms_helper joydev aes_x86_64 lrw drm gf128mul mousedev glue_helper sb_edac ablk_helper iTCO_wdt iTCO_vendor_support evdev ipmi_si syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core edac_core lpc_ich mac_hid cryptd pcspkr ipmi_msghandler shpchp tpm_tis acpi_power_meter tpm wmi processor hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache hid_generic usbhid hid ehci_pci ehci_hcd sd_mod megaraid_sas usbcore scsi_mod usb_common enic crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 781.122176] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc6-ARCH-00040-gc46a024-dirty #106 [ 781.122210] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 781.122252] 0000000000000000 bddbbc9d655ec96e ffff880277e43da8 ffffffff81583fe8 [ 781.122286] 0000000000000000 0000000000000000 ffff880277e43de8 ffffffff8107acfa [ 781.122319] ffff880272c01000 ffff880273f18000 ffff880273f1a100 0000000000000000 [ 781.122352] Call Trace: [ 781.122364] <IRQ> [<ffffffff81583fe8>] dump_stack+0x4f/0x7b [ 781.122399] [<ffffffff8107acfa>] warn_slowpath_common+0x8a/0xc0 [ 781.122425] [<ffffffff8107ae2a>] warn_slowpath_null+0x1a/0x20 [ 781.122455] [<ffffffffa01fa9ca>] enic_poll_msix_rq+0x36a/0x3c0 [enic] [ 781.122487] [<ffffffff8148525a>] net_rx_action+0x22a/0x370 [ 781.122512] [<ffffffff8107ed3d>] __do_softirq+0xed/0x2d0 [ 781.122537] [<ffffffff8107f06e>] irq_exit+0x7e/0xa0 [ 781.122560] [<ffffffff8158c424>] do_IRQ+0x64/0x100 [ 781.122582] [<ffffffff8158a42e>] common_interrupt+0x6e/0x6e [ 781.122605] <EOI> [<ffffffff810bd331>] ? cpu_startup_entry+0x121/0x480 [ 781.122638] [<ffffffff810bd2fc>] ? cpu_startup_entry+0xec/0x480 [ 781.122667] [<ffffffff810f2ed3>] ? clockevents_register_device+0x113/0x1f0 [ 781.122698] [<ffffffff81050ab6>] start_secondary+0x196/0x1e0 [ 781.122723] ---[ end trace cec2e9dd3af7b9db ]--- Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03ethernet: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27enic: do notify_check before returning creditsSujith Sankar
We should complete notify_check before returning the credits. Once we return the credits, adaptor may access the notify data. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05enic: enic_main: fix sparse warningsLad, Prabhakar
this patch fixes following sparse warnings: enic_main.c:92:28: warning: symbol 'mod_table' was not declared. Should it be static? enic_main.c:109:28: warning: symbol 'mod_range' was not declared. Should it be static? enic_main.c:1306:5: warning: symbol 'enic_busy_poll' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24enic: fix rx napi poll return valueGovindarajulu Varadarajan
With the commit d75b1ade567ffab ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When we are in busy_poll we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-01-04enic: reconfigure resources for kdump crash kernelGovindarajulu Varadarajan
When running in kdump kernel, reduce number of resources used by the driver. This will enable NIC to operate in low memory kdump kernel environment. Also change the driver version to .83 Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02enic: free all rq buffs when allocation failsGovindarajulu Varadarajan
When allocation of all RQs fail, we do not free previously allocated buffers, before returning error. This causes memory leak. This patch fixes this by calling vnic_rq_clean(), which frees all the rq buffers. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: check dma_mapping_errorGovindarajulu Varadarajan
This patch checks for pci_dma_mapping_error() after dma mapping the data. If the dma mapping fails we remove the previously queued frags and return NETDEV_TX_OK. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-19enic: fix rx skb checksumGovindarajulu Varadarajan
Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: <IRQ> [<ffffffff815e237b>] dump_stack+0x19/0x1b kernel: [<ffffffff814cd4ca>] netdev_rx_csum_fault+0x3a/0x40 kernel: [<ffffffff814c6232>] __skb_checksum_complete_head+0x62/0x70 kernel: [<ffffffff814c6251>] __skb_checksum_complete+0x11/0x20 kernel: [<ffffffff8155a20c>] nf_ip_checksum+0xcc/0x100 kernel: [<ffffffffa049edc7>] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [<ffffffff814cf419>] ? netif_rx+0xb9/0x1d0 kernel: [<ffffffffa040eb7b>] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [<ffffffffa04c8330>] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffffa049e302>] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [<ffffffff815005ca>] nf_iterate+0xaa/0xc0 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81500664>] nf_hook_slow+0x84/0x140 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81509dd4>] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc <jbenc@redhat.com> Cc: Stefan Assmann <sassmann@redhat.com> Reported-by: Sunil Choudhary <schoudha@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10enic: add support for set/get rss hash keyGovindarajulu Varadarajan
This patch adds support for setting/getting rss hash key using ethtool. v2: respin patch to support RSS hash function changes. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 00:11:10 +0000