summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cadence/macb.c
AgeCommit message (Collapse)Author
2012-11-01net/macb: better manage tx errorsNicolas Ferre
Handle all TX errors, not only underruns. TX error management is deferred to a dedicated workqueue. Reinitialize the TX ring after treating all remaining frames, and restart the controller when everything has been cleaned up properly. Napi is not stopped during this task as the driver only handles napi for RX for now. With this sequence, we do not need a special check during the xmit method as the packets will be caught by TX disable during workqueue execution. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: ethtool interface: add register dump featureNicolas Ferre
Add macb_get_regs() ethtool function and its helper function: macb_get_regs_len(). The version field is deduced from the IP revision which gives the "MACB or GEM" information. An additional version field is reserved. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: clean up ring buffer logicHavard Skinnemoen
Instead of masking head and tail every time we increment them, just let them wrap through UINT_MAX and mask them when subscripting. Add simple accessor functions to do the subscripting properly to minimize the chances of messing this up. This makes the code slightly smaller, and hopefully faster as well. Also, doing the ring buffer management this way will simplify things a lot when making the ring sizes configurable in the future. Available number of descriptors in ring buffer function by David Laight. Signed-off-by: Havard Skinnemoen <havard@skinnemoen.net> [nicolas.ferre@atmel.com: split patch in topics, adapt to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: tx status is more than 8 bits nowNicolas Ferre
On some revision of GEM, TSR status register has more information. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: remove macb_get_drvinfo()Nicolas Ferre
This function has little meaning so remove it altogether and let ethtool core fill in the fields automatically. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: change debugging messagesHavard Skinnemoen
Convert some noisy netdev_dbg() statements to netdev_vdbg(). Defining DEBUG will no longer fill up the logs; VERBOSE_DEBUG still does. Add one more verbose debug for ISR status. Signed-off-by: Havard Skinnemoen <havard@skinnemoen.net> [nicolas.ferre@atmel.com: split patch in topics, add ISR status] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: memory barriers cleanupHavard Skinnemoen
Remove a couple of unneeded barriers and document the remaining ones. Signed-off-by: Havard Skinnemoen <havard@skinnemoen.net> [nicolas.ferre@atmel.com: split patch in topics] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: Add support for Gigabit Ethernet modePatrice Vilchez
Add Gigabit Ethernet mode to GEM cadence IP and enable RGMII connection. Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23net/macb: fix truncate warningsJoachim Eastwood
When building macb on x86_64 the following warnings show up: drivers/net/ethernet/cadence/macb.c: In function macb_interrupt: drivers/net/ethernet/cadence/macb.c:556:4: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/net/ethernet/cadence/macb.c: In function macb_reset_hw: drivers/net/ethernet/cadence/macb.c:792:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/net/ethernet/cadence/macb.c:793:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/net/ethernet/cadence/macb.c:796:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] Use -1 insted of ~0UL, as done in other places in the driver, to silence these warnings. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-19net/at91_ether: share macb_set_rx_mode with macbJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/macb: export some symbols for at91_etherJoachim Eastwood
Export some symbols to start sharing code between macb and at91_ether drivers. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-07-09net/macb: manage carrier state with call to netif_carrier_{on|off}()Nicolas Ferre
OFF carrier state is setup in probe() open() and suspend() functions. The carrier ON state is managed in macb_handle_link_change(). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04macb: Support the get_ts_info ethtool method.Richard Cochran
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-10macb: use an unique MDIO bus name.Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-21net: macb: fix build break with !CONFIG_OFOlof Johansson
This fixes the build of the macb driver that was broken by the DT changes: drivers/net/ethernet/cadence/macb.c:1503: error: implicit declaration of function 'of_match_ptr' drivers/net/ethernet/cadence/macb.c:1503: error: 'macb_dt_ids' undeclared here (not in a function) drivers/net/ethernet/cadence/macb.c:1503: error: initializer element is not constant drivers/net/ethernet/cadence/macb.c:1503: error: (near initialization for 'macb_driver.driver.of_match_table') Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-12-16net/macb: add DT support for Cadence macb/gem driverJean-Christophe PLAGNIOL-VILLARD
Allow the device tree to provide the mac address and the phy mode. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: change "compatible" node property, doc and DT hwaddr] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [jamie@jamieiles.com: add "gem" compatibility strings and doc] Acked-by: Jamie Iles<jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net>
2011-11-22macb: allow GEM to have configurable receive buffer sizeJamie Iles
GEM has configurable receive buffer sizes so requires this to be programmed up. Any size < 2048 and a multiple of 64 bytes is permitted. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: support DMA bus widths > 32 bitsJamie Iles
Some GEM implementations may support DMA bus widths up to 128 bits. We can get the maximum supported DMA bus width from the design configuration register so use that to program the device up. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: support statistics for GEM devicesJamie Iles
GEM devices have a different number of statistics registers and they are at a different offset to MACB devices. Make the statistics collection method dependent on device type. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: support higher rate GEM MDIO clock divisorsJamie Iles
GEM devices support larger clock divisors and have a different range of divisors. Program the MDIO clock divisors based on the device type. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: initial support for Cadence GEMJamie Iles
The Cadence GEM is based on the MACB Ethernet controller but has a few small changes with regards to register and bitfield placement. This patch detects the presence of a GEM by reading the module ID register and setting a flag appropriately. This handles the new HW address, USRIO and hash register base register locations in GEM. v3: - convert to macb_is_gem() inline rather than storing a boolean flag - handle rx_overrun stats for gem Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: convert printk to netdev_ and friendsJamie Iles
macb is already using the dev_dbg() and friends helpers so use netdev_() along with a pr_fmt() definition to make the printing a little cleaner. Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: unify at91 and avr32 platform dataJamie Iles
Both at91 and avr32 defines its own platform data structure for the macb driver and both share common structures though at91 includes a currently unused phy_irq_pin. Create a common macb_platform_data for macb that both at91 and avr32 can use. In future we can use this to support other architectures that use the same IP block with the macb driver. v2: rename eth_platform_data to macb_platform_data and allow at91_ether to share the platform data with macb. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: remove conditional clk handlingJamie Iles
AT91 now provides both "pclk" and "hclk" aliases for the the macb device so we can use the same clk handling paths for both AT91 and AVR32. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12macb: Move the Atmel driverJeff Kirsher
Move the Atmel driver into drivers/net/ethernet/cadence/ and make the necessary Kconfig and Makefile changes. CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 01:53:41 +0000