summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
2025-07-17bnxt_en: Set DMA unmap len correctly for XDP_REDIRECTSomnath Kotur
[ Upstream commit 3cdf199d4755d477972ee87110b2aebc88b3cfad ] When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17bnxt_en: Fix DCB ETS validationShravya KN
[ Upstream commit b74c2a2e9cc471e847abd87e50a2354c07e02040 ] In bnxt_ets_validate(), the code incorrectly loops over all possible traffic classes to check and add the ETS settings. Fix it to loop over the configured traffic classes only. The unconfigured traffic classes will default to TSA_ETS with 0 bandwidth. Looping over these unconfigured traffic classes may cause the validation to fail and trigger this error message: "rejecting ETS config starving a TC\n" The .ieee_setets() will then fail. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17bnxt_en: eliminate the compile warning in bnxt_request_irq due to ↵Jason Xing
CONFIG_RFS_ACCEL [ Upstream commit b9fd9888a5654e59f6c6249337e36c53c1faa329 ] I received a kernel-test-bot report[1] that shows the [-Wunused-but-set-variable] warning. Since the previous commit I made, as the 'Fixes' tag shows, gives users an option to turn on and off the CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with GCC specifically. Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer bugs. [1] All warnings (new ones prefixed by >>): drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq': >> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable] 10703 | int i, j, rc = 0; | ^ Fixes: 9b6a30febddf ("net: allow rps/rfs related configs to be switched") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/ Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06bnxt: properly flush XDP redirect listsYan Zhai
[ Upstream commit 9caca6ac0e26cd20efd490d8b3b2ffb1c7c00f6f ] We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456] cpu_startup_entry+0x29/0x30 [56252.173248] start_secondary+0xf7/0x100 [56252.179941] common_startup_64+0x13e/0x141 [56252.186886] </TASK> From the crash dump, we found that the cpu_map_flush_list inside redirect info is partially corrupted: its list_head->next points to itself, but list_head->prev points to a valid list of unflushed bq entries. This turned out to be a result of missed XDP flush on redirect lists. By digging in the actual source code, we found that commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX ring structures") incorrectly overwrites the event mask for XDP_REDIRECT in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX and XDP_REDIRECT randomly for incoming packets in a naive XDP program. Properly propagate the XDP_REDIRECT events back fixes the crash. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27bnxt_en: Update MRU and RSS table of RSS contexts on queue resetPavan Chebbi
[ Upstream commit 5dacc94c6fe61cde6f700e95cf35af9944b022c4 ] The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start(). We further optimize this scheme by updating the VNIC only if the RX ring being restarted is in the RSS table of the VNIC. Updating the VNIC (in particular setting the MRU to 0) will momentarily stop all traffic to all rings in the RSS table. Any VNIC that has the RX ring excluded from the RSS table can skip this step and avoid the traffic disruption. Note that this scheme is just an improvement. A VNIC with multiple rings in the RSS table will still see traffic disruptions to all rings in the RSS table when one of the rings is being restarted. We are working on a FW scheme that will improve upon this further. Fixes: 5ac066b7b062 ("bnxt_en: Fix queue start to update vnic RSS table") Reported-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27bnxt_en: Add a helper function to configure MRU and RSSPavan Chebbi
[ Upstream commit e11baaea94e2923739a98abeee85eb0667c04fd3 ] Add a new helper function that will configure MRU and RSS table of a VNIC. This will be useful when we configure both on a VNIC when resetting an RX ring. This function will be used again in the next bug fix patch where we have to reconfigure VNICs for RSS contexts. Suggested-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 5dacc94c6fe6 ("bnxt_en: Update MRU and RSS table of RSS contexts on queue reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27eth: bnxt: fix out-of-range access of vnic_info arrayTaehee Yoo
[ Upstream commit 919f9f497dbcee75d487400e8f9815b74a6a37df ] The bnxt_queue_{start | stop}() access vnic_info as much as allocated, which indicates bp->nr_vnics. So, it should not reach bp->vnic_info[bp->nr_vnics]. Fixes: 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250316025837.939527-1-ap420073@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 5dacc94c6fe6 ("bnxt_en: Update MRU and RSS table of RSS contexts on queue reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()Kalesh AP
[ Upstream commit 1e9ac33fa271be0d2480fd732f9642d81542500b ] Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f35bd50 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Co-developed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250613231841.377988-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27bnxt_en: Remove unused field "ref_count" in struct bnxt_ulpKalesh AP
[ Upstream commit 5bccacb4cc32cb835fe2fe100a210332c494e81d ] The "ref_count" field in struct bnxt_ulp is unused after commit a43c26fa2e6c ("RDMA/bnxt_re: Remove the sriov config callback"). So we can just remove it now. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250417172448.1206107-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29bnxt_en: Query FW parameters when the CAPS_CHANGE bit is setshantiprasad shettar
[ Upstream commit a6c81e32aeacbfd530d576fa401edd506ec966ef ] Newer FW can set the CAPS_CHANGE flag during ifup if some capabilities or configurations have changed. For example, the CoS queue configurations may have changed. Support this new flag by treating it almost like FW reset. The driver will essentially rediscover all features and capabilities, reconfigure all backing store context memory, reset everything to default, and reserve all resources. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: shantiprasad shettar <shantiprasad.shettar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250310183129.3154117-5-michael.chan@broadcom.com Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: fix module unload sequenceVadim Fedorenko
[ Upstream commit 927069d5c40c1cfa7b2d13cfc6d7d58bc6f85c50 ] Recent updates to the PTP part of bnxt changed the way PTP FIFO is cleared, skbs waiting for TX timestamps are now cleared during ndo_close() call. To do clearing procedure, the ptp structure must exist and point to a valid address. Module destroy sequence had ptp clear code running before netdev close causing invalid memory access and kernel crash. Change the sequence to destroy ptp structure after device close. Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration") Reported-by: Taehee Yoo <ap420073@gmail.com> Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/ Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: Fix ethtool -d byte order for 32-bit valuesMichael Chan
[ Upstream commit 02e8be5a032cae0f4ca33c6053c44d83cf4acc93 ] For version 1 register dump that includes the PCIe stats, the existing code incorrectly assumes that all PCIe stats are 64-bit values. Fix it by using an array containing the starting and ending index of the 32-bit values. The loop in bnxt_get_regs() will use the array to do proper endian swap for the 32-bit values. Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'") Reviewed-by: Shruti Parab <shruti.parab@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: Fix out-of-bound memcpy() during ethtool -wShruti Parab
[ Upstream commit 6b87bd94f34370bbf1dfa59352bed8efab5bf419 ] When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands. Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: Fix coredump logic to free allocated bufferShruti Parab
[ Upstream commit ea9376cf68230e05492f22ca45d329f16e262c7b ] When handling HWRM_DBG_COREDUMP_LIST FW command in bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is not freed in the error path. In the normal path, info->dest_buf is assigned to coredump->data and it will eventually be freed after the coredump is collected. Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in the error path. Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reported-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()Kashyap Desai
[ Upstream commit 1ae04e489dd757e1e61999362f33e7c554c3b9e3 ] On some architectures (e.g. ARM), calling pci_alloc_irq_vectors() will immediately cause the MSIX table to be written. This will not work if we haven't called bnxt_reserve_rings() to properly map the MSIX table to the MSIX vectors reserved by FW. Fix the FW error recovery path to delay the bnxt_init_int_mode() -> pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change(). bnxt_request_irq() later in the code path will call it and by then the MSIX table is properly mapped. Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs") Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()Somnath Kotur
[ Upstream commit a63db07e4ecd45b027718168faf7d798bb47bf58 ] If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid, the SKB is freed but we're missing the call to recycle it. This may cause the warning: "page_pool_release_retry() stalled pool shutdown" Add the missing skb_mark_for_recycle() in bnxt_rx_vlan(). Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: Fix ethtool selftest output in one of the failure casesKalesh AP
[ Upstream commit 8e6cc9045380f3f0c48ebda2bda5e1abe263388d ] When RDMA driver is loaded, running offline self test is not supported and driver returns failure early. But it is not clearing the input buffer and hence the application prints some junk characters for individual test results. Fix it by clearing the buffer before returning. Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: Fix error handling path in bnxt_init_chip()Shravya KN
[ Upstream commit 9ab7a709c926c16b4433cf02d04fcbcf35aaab2b ] WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized. WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230 The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work. Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown") Suggested-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09bnxt_en: improve TX timestamping FIFO configurationVadim Fedorenko
[ Upstream commit 8f7ae5a85137b913cb97e2d24409d36548d0bab1 ] Reconfiguration of netdev may trigger close/open procedure which can break FIFO status by adjusting the amount of empty slots for TX timestamps. But it is not really needed because timestamps for the packets sent over the wire still can be retrieved. On the other side, during netdev close procedure any skbs waiting for TX timestamps can be leaked because there is no cleaning procedure called. Free skbs waiting for TX timestamps when closing netdev. Fixes: 8aa2a79e9b95 ("bnxt_en: Increase the max total outstanding PTP TX packets to 4") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Link: https://patch.msgid.link/20250424125547.460632-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25eth: bnxt: fix missing ring index trim on error pathJakub Kicinski
[ Upstream commit 12f2d033fae957d84c2c0ce604d2a077e61fa2c0 ] Commit under Fixes converted tx_prod to be free running but missed masking it on the Tx error path. This crashes on error conditions, for example when DMA mapping fails. Fixes: 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250414143210.458625-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22eth: bnxt: fix memory leak in queue resetTaehee Yoo
[ Upstream commit 87dd2850835dd7886726b428a8ef7d73a60520c7 ] When the queue is reset, the bnxt_alloc_one_tpa_info() is called to allocate tpa_info for the new queue. And then the old queue's tpa_info should be removed by the bnxt_free_one_tpa_info(), but it is not called. So memory leak occurs. It adds the bnxt_free_one_tpa_info() in the bnxt_queue_mem_free(). unreferenced object 0xffff888293cc0000 (size 16384): comm "ncdevmem", pid 2076, jiffies 4296604081 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 40 75 78 93 82 88 ff ff ........@ux..... 40 75 78 93 02 00 00 00 00 00 00 00 00 00 00 00 @ux............. backtrace (crc 5d7d4798): ___kmalloc_large_node+0x10d/0x1b0 __kmalloc_large_node_noprof+0x17/0x60 __kmalloc_noprof+0x3f6/0x520 bnxt_alloc_one_tpa_info+0x5f/0x300 [bnxt_en] bnxt_queue_mem_alloc+0x8e8/0x14f0 [bnxt_en] netdev_rx_queue_restart+0x233/0x620 net_devmem_bind_dmabuf_to_queue+0x2a3/0x600 netdev_nl_bind_rx_doit+0xc00/0x10a0 genl_family_rcv_msg_doit+0x1d4/0x2b0 genl_rcv_msg+0x3fb/0x6c0 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x447/0x710 netlink_sendmsg+0x712/0xbc0 __sys_sendto+0x3fd/0x4d0 __x64_sys_sendto+0xdc/0x1b0 Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-7-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22bnxt_en: handle tpa_info in queue API implementationDavid Wei
[ Upstream commit bd649c5cc958169b8a8a3e77ea926d92d472b02a ] Commit 7ed816be35ab ("eth: bnxt: use page pool for head frags") added a page pool for header frags, which may be distinct from the existing pool for the aggregation ring. Prior to this change, frags used in the TPA ring rx_tpa were allocated from system memory e.g. napi_alloc_frag() meaning their lifetimes were not associated with a page pool. They can be returned at any time and so the queue API did not alloc or free rx_tpa. But now frags come from a separate head_pool which may be different to page_pool. Without allocating and freeing rx_tpa, frags allocated from the old head_pool may be returned to a different new head_pool which causes a mismatch between the pp hold/release count. Fix this problem by properly freeing and allocating rx_tpa in the queue API implementation. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241204041022.56512-4-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 87dd2850835d ("eth: bnxt: fix memory leak in queue reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22bnxt_en: refactor tpa_info alloc/free into helpersDavid Wei
[ Upstream commit 5883a3e0babf55d85422fddec3422f211c853f6e ] Refactor bnxt_rx_ring_info->tpa_info operations into helpers that work on a single tpa_info in prep for queue API using them. There are 2 pairs of operations: * bnxt_alloc_one_tpa_info() * bnxt_free_one_tpa_info() These alloc/free the tpa_info array itself. * bnxt_alloc_one_tpa_info_data() * bnxt_free_one_tpa_info_data() These alloc/free the frags stored in tpa_info array. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241204041022.56512-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 87dd2850835d ("eth: bnxt: fix memory leak in queue reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22eth: bnxt: use page pool for head fragsJakub Kicinski
[ Upstream commit 7ed816be35abc3d5bed39d3edc5f2efed2ca5216 ] Testing small size RPCs (300B-400B) on a large AMD system suggests that page pool recycling is very useful even for just the head frags. With this patch (and copy break disabled) I see a 30% performance improvement (82Gbps -> 106Gbps). Convert bnxt from normal page frags to page pool frags for head buffers. On systems with small page size we can use the same pool as for TPA pages. On systems with large pages the frag allocation logic of the page pool is already used to split a large page into TPA chunks. TPA chunks are much larger than heads (8k or 64k, AFAICT vs 1kB) and we always allocate the same sized chunks. Mixing allocation of TPA and head pages would lead to sub-optimal memory use. Plus Taehee's work on zero-copy / devmem will need to differentiate between TPA and non-TPA page pool, anyway. Conditionally allocate a new page pool for heads. Link: https://patch.msgid.link/20241109035119.3391864-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 87dd2850835d ("eth: bnxt: fix memory leak in queue reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}Taehee Yoo
[ Upstream commit f09af5fdfbd9b0fcee73aab1116904c53b199e97 ] When qstats-get operation is executed, callbacks of netdev_stats_ops are called. The bnxt_get_queue_stats{rx | tx} collect per-queue stats from sw_stats in the rings. But {rx | tx | cp}_ring are allocated when the interface is up. So, these rings are not allocated when the interface is down. The qstats-get is allowed even if the interface is down. However, the bnxt_get_queue_stats{rx | tx}() accesses cp_ring and tx_ring without null check. So, it needs to avoid accessing rings if the interface is down. Reproducer: ip link set $interface down ./cli.py --spec netdev.yaml --dump qstats-get OR ip link set $interface down python ./stats.py Splat looks like: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1680fa067 P4D 1680fa067 PUD 16be3b067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1495 Comm: python3 Not tainted 6.14.0-rc4+ #32 5cd0f999d5a15c574ac72b3e4b907341 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en] Code: c6 87 b5 18 00 00 02 eb a2 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 01 RSP: 0018:ffffabef43cdb7e0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffc04c8710 RCX: 0000000000000000 RDX: ffffabef43cdb858 RSI: 0000000000000000 RDI: ffff8d504e850000 RBP: ffff8d506c9f9c00 R08: 0000000000000004 R09: ffff8d506bcd901c R10: 0000000000000015 R11: ffff8d506bcd9000 R12: 0000000000000000 R13: ffffabef43cdb8c0 R14: ffff8d504e850000 R15: 0000000000000000 FS: 00007f2c5462b080(0000) GS:ffff8d575f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000167fd0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? sched_balance_find_src_group+0x58d/0xd10 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en cdd546fd48563c280cfd30e9647efa420db07bf1] netdev_nl_stats_by_netdev+0x2b1/0x4e0 ? xas_load+0x9/0xb0 ? xas_find+0x183/0x1d0 ? xa_find+0x8b/0xe0 netdev_nl_qstats_get_dumpit+0xbf/0x1e0 genl_dumpit+0x31/0x90 netlink_dump+0x1a8/0x360 Fixes: af7b3b4adda5 ("eth: bnxt: support per-queue statistics") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250309134219.91670-6-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22eth: bnxt: do not update checksum in bnxt_xdp_build_skb()Taehee Yoo
[ Upstream commit c03e7d05aa0e2f7e9a9ce5ad8a12471a53f941dc ] The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload is enabled. When the XDP-MB program is attached and it returns XDP_PASS, the bnxt_xdp_build_skb() is called to update skb_shared_info. The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info, but it updates ip_summed value too if checksum offload is enabled. This is actually duplicate work. When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed is CHECKSUM_NONE or not. It means that ip_summed should be CHECKSUM_NONE at this moment. But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the XDP-MB-PASS path. So the by skb_checksum_none_assert() WARNS about it. This is duplicate work and updating ip_summed in the bnxt_xdp_build_skb() is not needed. Splat looks like: WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_] CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G W 6.14.0-rc4+ #27 Tainted: [W]=WARN Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f RSP: 0018:ffff88881ba09928 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000 RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8 RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070 R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080 R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000 FS: 00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0xcd/0x2f0 ? bnxt_rx_pkt+0x479b/0x7610 ? report_bug+0x326/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x14/0x50 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_rx_pkt+0x479b/0x7610 ? bnxt_rx_pkt+0x3e41/0x7610 ? __pfx_bnxt_rx_pkt+0x10/0x10 ? napi_complete_done+0x2cf/0x7d0 __bnxt_poll_work+0x4e8/0x1220 ? __pfx___bnxt_poll_work+0x10/0x10 ? __pfx_mark_lock.part.0+0x10/0x10 bnxt_poll_p5+0x36a/0xfa0 ? __pfx_bnxt_poll_p5+0x10/0x10 __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x899/0xd00 ... Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250309134219.91670-5-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logicTaehee Yoo
[ Upstream commit 661958552eda5bf64bfafb4821cbdded935f1f68 ] When a queue is restarted, it sets MRU to 0 for stopping packet flow. MRU variable is a member of vnic_info[], the first vnic_info is default and the second is ntuple. Only when ntuple is enabled(ethtool -K eth0 ntuple on), vnic_info for ntuple is allocated in init logic. The bp->nr_vnics indicates how many vnic_info are allocated. However bnxt_queue_{start | stop}() accesses vnic_info[BNXT_VNIC_NTUPLE] regardless of ntuple state. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b9d2956e869c ("bnxt_en: stop packet flow during bnxt_queue_stop/start") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-4-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc()Taehee Yoo
[ Upstream commit ca2456e073957781e1184de68551c65161b2bd30 ] The bnxt_queue_mem_alloc() is called to allocate new queue memory when a queue is restarted. It internally accesses rx buffer descriptor corresponding to the index. The rx buffer descriptor is allocated and set when the interface is up and it's freed when the interface is down. So, if queue is restarted if interface is down, kernel panic occurs. Splat looks like: BUG: unable to handle page fault for address: 000000000000b240 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ #9 844ddba6e7c459cafd0bf4db9a3198e Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en] Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15 RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202 RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000 RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808 RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000 R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000 FS: 00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] ? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] netdev_rx_queue_restart+0xc5/0x240 net_devmem_bind_dmabuf_to_queue+0xf8/0x200 netdev_nl_bind_rx_doit+0x3a7/0x450 genl_family_rcv_msg_doit+0xd9/0x130 genl_rcv_msg+0x184/0x2b0 ? __pfx_netdev_nl_bind_rx_doit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 ... Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250309134219.91670-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22eth: bnxt: fix truesize for mb-xdp-pass caseTaehee Yoo
[ Upstream commit 9f7b2aa5034e24d3c49db73d5f760c0435fe31c2 ] When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17tg3: Disable tg3 PCIe AER on system rebootLenny Szubowicz
[ Upstream commit e0efe83ed325277bb70f9435d4d9fc70bebdcca8 ] Disable PCIe AER on the tg3 device on system reboot on a limited list of Dell PowerEdge systems. This prevents a fatal PCIe AER event on the tg3 device during the ACPI _PTS (prepare to sleep) method for S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep() as part of the kernel's reboot sequence as a result of commit 38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot"). There was an earlier fix for this problem by commit 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER"). But it was discovered that this earlier fix caused a reboot hang when some Dell PowerEdge servers were booted via ipxe. To address this reboot hang, the earlier fix was essentially reverted by commit 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF"). This re-exposed the tg3 PCIe AER on reboot problem. This fix is not an ideal solution because the root cause of the AER is in system firmware. Instead, it's a targeted work-around in the tg3 driver. Note also that the PCIe AER must be disabled on the tg3 device even if the system is configured to use "firmware first" error handling. V3: - Fix sparse warning on improper comparison of pdev->current_state - Adhere to netdev comment style Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF") Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17net: bcmgenet: Correct overlaying of PHY and MAC Wake-on-LANFlorian Fainelli
[ Upstream commit 46ded709232344b5750a852747a8881763c721ab ] Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC, while others might be only supported by the PHY. Make sure that the .get_wol() returns the union of both rather than only that of the PHY if the PHY supports Wake-on-LAN. When disabling Wake-on-LAN, make sure that this is done at both the PHY and MAC level, rather than doing an early return from the PHY driver. Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN") Fixes: 9ee09edc05f2 ("net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250129231342.35013-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08bgmac: reduce max frame size to support just MTU 1500Rafał Miłecki
[ Upstream commit 752e5fcc2e77358936d36ef8e522d6439372e201 ] bgmac allocates new replacement buffer before handling each received frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU time. Ideally bgmac should just respect currently set MTU but it isn't the case right now. For now just revert back to the old limited frame size. This change bumps NAT masquerade speed by ~95%. Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for page_frag_alloc_align()"), the bgmac driver fails to open its network interface successfully and runs out of memory in the following call stack: bgmac_open -> bgmac_dma_init -> bgmac_dma_rx_skb_for_slot -> netdev_alloc_frag BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768. Eventually we land into __page_frag_alloc_align() with the following parameters across multiple successive calls: __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144 So in that case we do indeed have offset + fragsz (40192) > size (32768) and so we would eventually return NULL. Reverting to the older 1500 bytes MTU allows the network driver to be usable again. Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [florian: expand commit message about recent commits] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23eth: bnxt: always recalculate features after XDP clearing, fix null-derefJakub Kicinski
[ Upstream commit f0aa6a37a3dbb40b272df5fc6db93c114688adcd ] Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues. Fixes: 1054aee82321 ("bnxt_en: Use NETIF_F_GRO_HW.") Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250109043057.2888953-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-17bnxt_en: Fix DIM shutdownMichael Chan
[ Upstream commit 40452969a50652e3cbf89dac83d54eebf2206d27 ] DIM work will call the firmware to adjust the coalescing parameters on the RX rings. We should cancel DIM work before we call the firmware to free the RX rings. Otherwise, FW will reject the call from DIM work if the RX ring has been freed. This will generate an error message like this: bnxt_en 0000:21:00.1 ens2f1np1: hwrm req_type 0x53 seq id 0x6fca error 0x2 and cause unnecessary concern for the user. It is also possible to modify the coalescing parameters of the wrong ring if the ring has been re-allocated. To prevent this, cancel DIM work right before freeing the RX rings. We also have to add a check in NAPI poll to not schedule DIM if the RX rings are shutting down. Check that the VNIC is active before we schedule DIM. The VNIC is always disabled before we free the RX rings. Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-17bnxt_en: Fix possible memory leak when hwrm_req_replace failsKalesh AP
[ Upstream commit c8dafb0e4398dacc362832098a04b97da3b0395b ] When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop() which could cause a memory leak. Fixes: bbf33d1d9805 ("bnxt_en: update all firmware calls to use the new APIs") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09eth: bcmsysport: fix call balance of priv->clk handling routinesVitalii Mordan
[ Upstream commit b255ef45fcc2141c1bf98456796abb956d843a27 ] Check the return value of clk_prepare_enable to ensure that priv->clk has been successfully enabled. If priv->clk was not enabled during bcm_sysport_probe, bcm_sysport_resume, or bcm_sysport_open, it must not be disabled in any subsequent execution paths. Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20241227123007.2333397-1-mordan@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27net: ethernet: bgmac-platform: fix an OF node reference leakJoe Hattori
[ Upstream commit 0cb2c504d79e7caa3abade3f466750c82ad26f01 ] The OF node obtained by of_parse_phandle() is not freed. Call of_node_put() to balance the refcount. This bug was found by an experimental static analysis tool that I am developing. Fixes: 1676aba5ef7e ("net: ethernet: bgmac: device tree phy enablement") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241214014912.2810315-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chipsMichael Chan
[ Upstream commit 24c6843b7393ebc80962b59d7ae71af91bf0dcc1 ] The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of the previous generation (5750X or P5). However, the aggregation ID fields in the completion structures on P7 have been redefined from 16 bits to 12 bits. The freed up 4 bits are redefined for part of the metadata such as the VLAN ID. The aggregation ID mask was not modified when adding support for P7 chips. Including the extra 4 bits for the aggregation ID can potentially cause the driver to store or fetch the packet header of GRO/LRO packets in the wrong TPA buffer. It may hit the BUG() condition in __skb_pull() because the SKB contains no valid packet header: kernel BUG at include/linux/skbuff.h:2766! Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022 RIP: 0010:eth_type_trans+0xda/0x140 Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48 RSP: 0018:ff615003803fcc28 EFLAGS: 00010283 RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040 RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000 RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001 R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0 R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000 FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? eth_type_trans+0xda/0x140 ? do_error_trap+0x65/0x80 ? eth_type_trans+0xda/0x140 ? exc_invalid_op+0x4e/0x70 ? eth_type_trans+0xda/0x140 ? asm_exc_invalid_op+0x16/0x20 ? eth_type_trans+0xda/0x140 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en] ? bnxt_tpa_start+0x195/0x320 [bnxt_en] bnxt_rx_pkt+0x902/0xd90 [bnxt_en] ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en] ? kmem_cache_free+0x343/0x440 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en] __bnxt_poll_work+0x193/0x370 [bnxt_en] bnxt_poll_p5+0x9a/0x300 [bnxt_en] ? try_to_wake_up+0x209/0x670 __napi_poll+0x29/0x1b0 Fix it by redefining the aggregation ID mask for P5_PLUS chips to be 12 bits. This will work because the maximum aggregation ID is less than 4096 on all P5_PLUS chips. Fixes: 13d2d3d381ee ("bnxt_en: Add new P7 hardware interface definitions") Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241209015448.1937766-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19bnxt_en: Fix GSO type for HW GRO packets on 5750X chipsMichael Chan
[ Upstream commit de37faf41ac55619dd329229a9bd9698faeabc52 ] The existing code is using RSS profile to determine IPV4/IPV6 GSO type on all chips older than 5760X. This won't work on 5750X chips that may be using modified RSS profiles. This commit from 2018 has updated the driver to not use RSS profile for HW GRO packets on newer chips: 50f011b63d8c ("bnxt_en: Update RSS setup and GRO-HW logic according to the latest spec.") However, a recent commit to add support for the newest 5760X chip broke the logic. If the GRO packet needs to be re-segmented by the stack, the wrong GSO type will cause the packet to be dropped. Fix it to only use RSS profile to determine GSO type on the oldest 5730X/5740X chips which cannot use the new method and is safe to use the RSS profiles. Also fix the L3/L4 hash type for RX packets by not using the RSS profile for the same reason. Use the ITYPE field in the RX completion to determine L3/L4 hash types correctly. Fixes: a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7") Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241204215918.1692597-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14bnxt_en: ethtool: Supply ntuple rss context actionDaniel Xu
[ Upstream commit be75cda92a65a13db242117d674cd5584477a168 ] Commit 2f4f9fe5bf5f ("bnxt_en: Support adding ntuple rules on RSS contexts") added support for redirecting to an RSS context as an ntuple rule action. However, it forgot to update the ETHTOOL_GRXCLSRULE codepath. This caused `ethtool -n` to always report the action as "Action: Direct to queue 0" which is wrong. Fix by teaching bnxt driver to report the RSS context when applicable. Fixes: 2f4f9fe5bf5f ("bnxt_en: Support adding ntuple rules on RSS contexts") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://patch.msgid.link/2e884ae39e08dc5123be7c170a6089cefe6a78f7.1732748253.git.dxu@dxuuu.xyz Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05bnxt_en: Unregister PTP during PCI shutdown and suspendMichael Chan
[ Upstream commit 3661c05c54e8db7064aa96a0774654740974dffc ] If we go through the PCI shutdown or suspend path, we shutdown the NIC but PTP remains registered. If the kernel continues to run for a little bit, the periodic PTP .do_aux_work() function may be called and it will read the PHC from the BAR register. Since the device has already been disabled, it will cause a PCIe completion timeout. Fix it by calling bnxt_ptp_clear() in the PCI shutdown/suspend handlers. bnxt_ptp_clear() will unregister from PTP and .do_aux_work() will be canceled. In bnxt_resume(), we need to re-initialize PTP. Fixes: a521c8a01d26 ("bnxt_en: Move bnxt_ptp_init() from bnxt_open() back to bnxt_init_one()") Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05bnxt_en: Refactor bnxt_ptp_init()Michael Chan
[ Upstream commit 1e9614cd956268e10a669c0593e7e54d03d0c087 ] Instead of passing the 2nd parameter phc_cfg to bnxt_ptp_init(). Store it in bp->ptp_cfg so that the caller doesn't need to know what the value should be. In the next patch, we'll need to call bnxt_ptp_init() in bnxt_resume() and this will make it easier. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 3661c05c54e8 ("bnxt_en: Unregister PTP during PCI shutdown and suspend") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05bnxt_en: Fix receive ring space parameters when XDP is activeShravya KN
[ Upstream commit 3051a77a09dfe3022aa012071346937fdf059033 ] The MTU setting at the time an XDP multi-buffer is attached determines whether the aggregation ring will be used and the rx_skb_func handler. This is done in bnxt_set_rx_skb_mode(). If the MTU is later changed, the aggregation ring setting may need to be changed and it may become out-of-sync with the settings initially done in bnxt_set_rx_skb_mode(). This may result in random memory corruption and crashes as the HW may DMA data larger than the allocated buffer size, such as: BUG: kernel NULL pointer dereference, address: 00000000000003c0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 17 PID: 0 Comm: swapper/17 Kdump: loaded Tainted: G S OE 6.1.0-226bf9805506 #1 Hardware name: Wiwynn Delta Lake PVT BZA.02601.0150/Delta Lake-Class1, BIOS F0E_3A12 08/26/2021 RIP: 0010:bnxt_rx_pkt+0xe97/0x1ae0 [bnxt_en] Code: 8b 95 70 ff ff ff 4c 8b 9d 48 ff ff ff 66 41 89 87 b4 00 00 00 e9 0b f7 ff ff 0f b7 43 0a 49 8b 95 a8 04 00 00 25 ff 0f 00 00 <0f> b7 14 42 48 c1 e2 06 49 03 95 a0 04 00 00 0f b6 42 33f RSP: 0018:ffffa19f40cc0d18 EFLAGS: 00010202 RAX: 00000000000001e0 RBX: ffff8e2c805c6100 RCX: 00000000000007ff RDX: 0000000000000000 RSI: ffff8e2c271ab990 RDI: ffff8e2c84f12380 RBP: ffffa19f40cc0e48 R08: 000000000001000d R09: 974ea2fcddfa4cbf R10: 0000000000000000 R11: ffffa19f40cc0ff8 R12: ffff8e2c94b58980 R13: ffff8e2c952d6600 R14: 0000000000000016 R15: ffff8e2c271ab990 FS: 0000000000000000(0000) GS:ffff8e3b3f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000003c0 CR3: 0000000e8580a004 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> __bnxt_poll_work+0x1c2/0x3e0 [bnxt_en] To address the issue, we now call bnxt_set_rx_skb_mode() within bnxt_change_mtu() to properly set the AGG rings configuration and update rx_skb_func based on the new MTU value. Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on the current MTU. Fixes: 08450ea98ae9 ("bnxt_en: Fix max_mtu setting for multi-buf XDP") Co-developed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05bnxt_en: Fix queue start to update vnic RSS tableSomnath Kotur
[ Upstream commit 5ac066b7b062ee753a14557ea11bdc62364c8090 ] HWRM_RING_FREE followed by a HWRM_RING_ALLOC is not guaranteed to have the same FW ring ID as before. So we must reinitialize the RSS table with the correct ring IDs. Otherwise, traffic may not resume properly if the restarted ring ID is stale. Since this feature is only supported on P5_PLUS chips, we call bnxt_vnic_set_rss_p5() to update the HW RSS table. Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Cc: David Wei <dw@davidwei.uk> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05bnxt_en: Set backplane link modes correctly for ethtoolShravya KN
[ Upstream commit 5007991670941c132fb3bc0484c009cf4bcea30f ] Use the return value from bnxt_get_media() to determine the port and link modes. bnxt_get_media() returns the proper BNXT_MEDIA_KR when the PHY is backplane. This will correct the ethtool settings for backplane devices. Fixes: 5d4e1bf60664 ("bnxt_en: extend media types to supported and autoneg modes") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05bnxt_en: Reserve rings after PCIe AER recovery if NIC interface is downSaravanan Vajravel
[ Upstream commit 5311598f7f3293683cdc761df71ae3469327332c ] After successful PCIe AER recovery, FW will reset all resource reservations. If it is IF_UP, the driver will call bnxt_open() and all resources will be reserved again. It it is IF_DOWN, we should call bnxt_reserve_rings() so that we can reserve resources including RoCE resources to allow RoCE to resume after AER. Without this patch, RoCE fails to resume in this IF_DOWN scenario. Later, if it becomes IF_UP, bnxt_open() will see that resources have been reserved and will not reserve again. Fixes: fb1e6e562b37 ("bnxt_en: Fix AER recovery.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsetsPavan Chebbi
[ Upstream commit 614f4d166eeeb9bd709b0ad29552f691c0f45776 ] The hardware on Broadcom 1G chipsets have a known limitation where they cannot handle DMA addresses that cross over 4GB. When such an address is encountered, the hardware sets the address overflow error bit in the DMA status register and triggers a reset. However, BCM57766 hardware is setting the overflow bit and triggering a reset in some cases when there is no actual underlying address overflow. The hardware team analyzed the issue and concluded that it is happening when the status block update has an address with higher (b16 to b31) bits as 0xffff following a previous update that had lowest bits as 0xffff. To work around this bug in the BCM57766 hardware, set the coherent dma mask from the current 64b to 31b. This will ensure that upper bits of the status block DMA address are always at most 0x7fff, thus avoiding the improper overflow check described above. This work around is intended for only status block and ring memories and has no effect on TX and RX buffers as they do not require coherent memory. Fixes: 72f2afb8a685 ("[TG3]: Add DMA address workaround") Reported-by: Salam Noureddine <noureddine@arista.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20241119055741.147144-1-pavan.chebbi@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-19bnxt_en: replace ptp_lock with irqsave variantVadim Fedorenko
In netpoll configuration the completion processing can happen in hard irq context which will break with spin_lock_bh() for fullfilling RX timestamp in case of all packets timestamping. Replace it with spin_lock_irqsave() variant. Fixes: 7f5515d19cd7 ("bnxt_en: Get the RX packet timestamp") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Message-ID: <20241016195234.2622004-1-vadfed@meta.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-15net: bcmasp: fix potential memory leak in bcmasp_xmit()Wang Hai
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb in case of mapping fails, add dev_kfree_skb() to fix it. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20241014145901.48940-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-15net: systemport: fix potential memory leak in bcm_sysport_xmit()Wang Hai
The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://patch.msgid.link/20241014145115.44977-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 21:00:54 +0000