summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnxt
AgeCommit message (Collapse)Author
2023-01-20bnxt: Do not read past the end of test namesKees Cook
Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-11bnxt: make sure we return pages to the poolJakub Kicinski
Before the commit under Fixes the page would have been released from the pool before the napi_alloc_skb() call, so normal page freeing was fine (released page == no longer in the pool). After the change we just mark the page for recycling so it's still in the pool if the skb alloc fails, we need to recycle. Same commit added the same bug in the new bnxt_rx_multi_page_skb(). Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-28bnxt_en: Fix HDS and jumbo thresholds for RX packetsMichael Chan
The recent XDP multi-buffer feature has introduced regressions in the setting of HDS and jumbo thresholds. HDS was accidentally disabled in the nornmal mode without XDP. This patch restores jumbo HDS placement when not in XDP mode. In XDP multi-buffer mode, HDS should be disabled and the jumbo threshold should be set to the usable page size in the first page buffer. Fixes: 32861236190b ("bnxt: change receive ring space parameters") Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: Fix first buffer size calculations for XDP multi-bufferMichael Chan
The size of the first buffer is always page size, and the useable space is the page size minus the offset and the skb_shared_info size. Make sure SKB and XDP buf sizes match so that the skb_shared_info is at the same offset seen from the SKB and XDP_BUF. build_skb() should be passed PAGE_SIZE. xdp_init_buff() should be passed PAGE_SIZE as well. xdp_get_shared_info_from_buff() will automatically deduct the skb_shared_info size if the XDP buffer has frags. There is no need to keep bp->xdp_has_frags. Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF since this constant is really the MTU with ethernet header size subtracted. Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses. Fixes: 32861236190b ("bnxt: change receive ring space parameters") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: Fix XDP RX pathMichael Chan
The XDP program can change the starting address of the RX data buffer and this information needs to be passed back from bnxt_rx_xdp() to bnxt_rx_pkt() for the XDP_PASS case so that the SKB can point correctly to the modified buffer address. Add back the data_ptr parameter to bnxt_rx_xdp() to make this work. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: Simplify bnxt_xdp_buff_init()Michael Chan
bnxt_xdp_buff_init() does not modify the data_ptr or the len parameters, so no need to pass in the addresses of these parameters. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: fix devlink port registration to netdevVikas Gupta
We don't register a devlink port in case of a VF so avoid setting the devlink pointer to netdev. Also, SET_NETDEV_DEVLINK_PORT has to be moved so that we determine whether the device is PF/VF first. This fixes the NULL pointer dereference of devlink_port->devlink when creating VFs: BUG: kernel NULL pointer dereference, address: 0000000000000160 PGD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 14 PID: 388 Comm: kworker/14:1 Kdump: loaded Not tainted 6.1.0-rc8 #5 Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021 Workqueue: events work_for_cpu_fn RIP: 0010:devlink_nl_port_handle_size+0xb/0x50 Code: 83 c4 10 5b 5d c3 cc cc cc cc b8 a6 ff ff ff eb de e8 c9 59 21 00 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 8b 47 20 <48> 8b a8 60 01 00 00 48 8b 45 60 48 8b 38 e8 92 90 1a 00 48 8b 7d RSP: 0018:ff4fe5394846fcd8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000794 RCX: 0000000000000000 RDX: ff1f129683a30a40 RSI: 0000000000000008 RDI: ff1f1296bb496188 RBP: 0000000000000334 R08: 0000000000000cc0 R09: 0000000000000000 R10: ff1f1296bb494298 R11: ffffffffffffffc0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1f1296bb494000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ff1f129e5fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000160 CR3: 000000131f610006 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> if_nlmsg_size+0x14a/0x220 rtmsg_ifinfo_build_skb+0x3c/0x100 rtmsg_ifinfo+0x9c/0xc0 register_netdevice+0x59d/0x670 register_netdev+0x1c/0x40 bnxt_init_one+0x674/0xa60 [bnxt_en] local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 ? rescuer_thread+0x390/0x390 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xd6/0x100 ? kthread_complete_and_exit+0x20/0x20 Fixes: ac73d4bf2cda ("net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_port") Cc: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-12bnxt: Use generic HBH removal helper in tx pathCoco Li
Eric Dumazet implemented Big TCP that allowed bigger TSO/GRO packet sizes for IPv6 traffic. See patch series: 'commit 89527be8d8d6 ("net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes")' This reduces the number of packets traversing the networking stack and should usually improves performance. However, it also inserts a temporary Hop-by-hop IPv6 extension header. Using the HBH header removal method in the previous patch, the extra header be removed in bnxt drivers to allow it to send big TCP packets (bigger TSO packets) as well. Tested: Compiled locally To further test functional correctness, update the GSO/GRO limit on the physical NIC: ip link set eth0 gso_max_size 181000 ip link set eth0 gro_max_size 181000 Note that if there are bonding or ipvan devices on top of the physical NIC, their GSO sizes need to be updated as well. Then, IPv6/TCP packets with sizes larger than 64k can be observed. Signed-off-by: Coco Li <lixiaoyan@google.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20221210041646.3587757-2-lixiaoyan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01bnxt: report FEC block stats via standard interfaceJakub Kicinski
I must have missed that these stats are only exposed via the unstructured ethtool -S when they got merged. Plumb in the structured form. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20221130013108.90062-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30net: devlink: let the core report the driver name instead of the driversVincent Mailhol
The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. In order to factorize code, make devlink_nl_info_fill() add the driver name attribute. Now that the core sets the driver name attribute, drivers are not supposed to call devlink_info_driver_name_put() anymore. Remove devlink_info_driver_name_put() and clean-up all the drivers using this function in their callback. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14bnxt_en: Remove debugfs when pci_register_driver failedGaosheng Cui
When pci_register_driver failed, we need to remove debugfs, which will caused a resource leak, fix it. Resource leak logs as follows: [ 52.184456] debugfs: Directory 'bnxt_en' with parent '/' already present! Fixes: cabfb09d87bd ("bnxt_en: add debugfs support for DIM") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-11ptp: bnxt: convert .adjfreq to .adjfineJacob Keller
When the BNXT_FW_CAP_PTP_RTC flag is not set, the bnxt driver implements .adjfreq on a cyclecounter in terms of the straightforward "base * ppb / 1 billion" calculation. When BNXT_FW_CAP_PTP_RTC is set, the driver forwards the ppb value to firmware for configuration. Convert the driver to the newer .adjfine interface, updating the cyclecounter calculation to use adjust_by_scaled_ppm to perform the calculation. Use scaled_ppm_to_ppb when forwarding the correction to firmware. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08bnxt_en: Add a non-real time mode to access NIC clockPavan Chebbi
When using a PHC that is shared between multiple hosts, in order to achieve consistent timestamps across all hosts, we need to isolate the PHC from any host making frequency adjustments. This patch adds a non-real time mode for this purpose. The implementation is based on a free running NIC hardware timer which is used as the timestamper time-base. Each host implements individual adjustments to a local timecounter based on the NIC free running timer. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-08bnxt_en: update RSS config using difference algorithmEdwin Peer
Hardware is unable to realize all legal firmware interface state values for hash_type. For example, if 4-tuple TCP_IPV4 hash is enabled, 4-tuple UDP_IPV4 hash must also be enabled. By providing the bits the user intended to change instead of the possible illegal intermediate states, the firmware is able to make better compromises when deciding which bits to ignore. With this new mechansim, we can now report the actual configured hash back to the user. Add bnxt_hwrm_update_rss_hash_cfg() to report the actual hash after user configuration. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-08bnxt_en: refactor VNIC RSS update functionsEdwin Peer
Extract common code into a new function. This will avoid duplication in the next patch, which changes the update algorithm for both the P5 and legacy code paths. No functional changes. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-08ethtool: linkstate: add a statistic for PHY down eventsJakub Kicinski
The previous attempt to augment carrier_down (see Link) was not met with much enthusiasm so let's do the simple thing of exposing what some devices already maintain. Add a common ethtool statistic for link going down. Currently users have to maintain per-driver mapping to extract the right stat from the vendor-specific ethtool -S stats. carrier_down does not fit the bill because it counts a lot of software related false positives. Add the statistic to the extended link state API to steer vendors towards implementing all of it. Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly) enic also have a counter for this but I leave the implementation to their maintainers. Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221104190125.684910-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-04bnxt_en: fix potentially incorrect return value for ndo_rx_flow_steerAlex Barba
In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry that we are attempting to steer is already found. This is not the correct behavior. The return code should be the value/index that corresponds to the entry. Returning zero all the time causes the RFS records to be incorrect unless entry '0' is the correct one. As flows migrate to different cores this can create entries that are not correct. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Akshay Navgire <anavgire@purestorage.com> Signed-off-by: Alex Barba <alex.barba@broadcom.com> Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-04bnxt_en: Fix possible crash in bnxt_hwrm_set_coal()Michael Chan
During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-04bnxt_en: fix the handling of PCIE-AERVikas Gupta
Fix the sequence required for PCIE-AER. While slot reset occurs, firmware might not be ready and the driver needs to check for its recovery. We also need to remap the health registers for some chips and clear the resource reservations. The resources will be allocated again during bnxt_io_resume(). Fixes: fb1e6e562b37 ("bnxt_en: Fix AER recovery.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-04bnxt_en: refactor bnxt_cancel_reservations()Vikas Gupta
Introduce bnxt_clear_reservations() to clear the reserved attributes only. This will be used in the next patch to fix PCI AER handling. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: remove unused ndo_get_devlink_portJiri Pirko
Remove ndo_get_devlink_port which is no longer used alongside with the implementations in drivers. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_portJiri Pirko
Benefit from the previously implemented tracking of netdev events in devlink code and instead of calling devlink_port_type_eth_set() and devlink_port_type_clear() to set devlink port type and link to related netdev, use SET_NETDEV_DEVLINK_PORT() macro to assign devlink_port pointer to netdevice which is about to be registered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24bnxt_en: check and resize NVRAM UPDATE entry before flashingVikas Gupta
Resize of the UPDATE entry is required if the image to be flashed is larger than the available space. Add this step, otherwise flashing larger firmware images by ethtool or devlink may fail. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24bnxt_en: add .get_module_eeprom_by_page() supportVikas Gupta
Add support for .get_module_eeprom_by_page() callback which implements generic solution for module`s eeprom access. v3: Add bnxt_get_module_status() to get a more specific extack error string. Return -EINVAL from bnxt_get_module_eeprom_by_page() when we don't want to fallback to old method. v2: Simplification suggested by Ido Schimmel Link: https://lore.kernel.org/netdev/YzVJ%2FvKJugoz15yV@shredder/ Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24bnxt_en: Update firmware interface to 1.10.2.118Michael Chan
The main changes are PTM timestamp support, CMIS EEPROM support, and asymmetric CoS queues support. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-20Merge tag 'net-6.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - revert "net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}" - revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" - dsa: uninitialized variable in dsa_slave_netdevice_event() - eth: sunhme: uninitialized variable in happy_meal_init() Current release - new code bugs: - eth: octeontx2: fix resource not freed after malloc Previous releases - regressions: - sched: fix return value of qdisc ingress handling on success - sched: fix race condition in qdisc_graft() - udp: update reuse->has_conns under reuseport_lock. - tls: strp: make sure the TCP skbs do not have overlapping data - hsr: avoid possible NULL deref in skb_clone() - tipc: fix an information leak in tipc_topsrv_kern_subscr - phylink: add mac_managed_pm in phylink_config structure - eth: i40e: fix DMA mappings leak - eth: hyperv: fix a RX-path warning - eth: mtk: fix memory leaks Previous releases - always broken: - sched: cake: fix null pointer access issue when cake_init() fails" * tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) net: phy: dp83822: disable MDI crossover status change interrupt net: sched: fix race condition in qdisc_graft() net: hns: fix possible memory leak in hnae_ae_register() wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new() sfc: include vport_id in filter spec hash and equal() genetlink: fix kdoc warnings selftests: add selftest for chaining of tc ingress handling to egress net: Fix return value of qdisc ingress handling on success net: sched: sfb: fix null pointer access issue when sfb_init() fails Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" net: sched: cake: fix null pointer access issue when cake_init() fails ethernet: marvell: octeontx2 Fix resource not freed after malloc netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. ionic: catch NULL pointer issue on reconfig net: hsr: avoid possible NULL deref in skb_clone() bnxt_en: fix memory leak in bnxt_nvm_test() ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed udp: Update reuse->has_conns under reuseport_lock. net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable() ...
2022-10-18bnxt_en: fix memory leak in bnxt_nvm_test()Vikas Gupta
Free the kzalloc'ed buffer before returning in the success path. Fixes: 5b6ff128fdf6 ("bnxt_en: implement callbacks for devlink selftests") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1666020742-25834-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-11treewide: use get_random_bytes() when possibleJason A. Donenfeld
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22bnxt_en: replace reset with config timestampsVadim Fedorenko
Any change to the hardware timestamps configuration triggers nic restart, which breaks transmition and reception of network packets for a while. But there is no need to fully restart the device because while configuring hardware timestamps. The code for changing configuration runs after all of the initialisation, when the NIC is actually up and running. This patch changes the code that ioctl will only update configuration registers and will not trigger carrier status change, but in case of timestamps for all rx packetes it fallbacks to close()/open() sequnce because of synchronization issues in the hardware. Tested on BCM57504. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220922191038.29921-1-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22bnxt: prevent skb UAF after handing over to PTP workerJakub Kicinski
When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL. Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220921201005.335390-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-19bnxt_en: fix flags to check for supported fw versionVadim Fedorenko
The warning message of unsupported FW appears every time RX timestamps are disabled on the interface. The patch fixes the flags to correct set for the check. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220915234932.25497-1-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: fix LRO/GRO_HW features in ndo_fix_features callbackVikas Gupta
LRO/GRO_HW should be disabled if there is an attached XDP program. BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW. Using BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be permanently disabled once they are disabled. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: fix NQ resource accounting during vf creation on 57500 chipsVikas Gupta
There are 2 issues: 1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs with the number of NQs assigned to the VFs. The IRQs are fixed on each function and cannot be re-assigned. Only the NQs are being assigned to the VFs. 2. vf_msix is the total number of NQs to be assigned to the VFs. So we should decrement vf_msix from hw_resc->max_nqs. Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: set missing reload flag in devlink featuresVikas Gupta
Add missing devlink_set_features() API for callbacks reload_down and reload_up to function. Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: Use PAGE_SIZE to init buffer when multi buffer XDP is not in usePavan Chebbi
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not sufficient when running single buffer XDP programs doing redirect operations. The stack will complain on missing skb tail room. Fix it by using PAGE_SIZE when calling xdp_init_buff() for single buffer programs. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05bnxt_en: Remove duplicated include bnxt_devlink.cYang Li
bnxt_ethtool.h is included twice in bnxt_devlink.c, remove one of them. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1817 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220804003722.54088-1-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28bnxt_en: implement callbacks for devlink selftestsvikas
Add callbacks ============= .selftest_check: returns true for flash selftest. .selftest_run: runs a flash selftest. Also, refactor NVM APIs so that they can be used with devlink and ethtool both. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix bnxt_refclk_read()Pavan Chebbi
The upper 32-bit PHC register is not latched when reading the lower 32-bit PHC register. Current code leaves a small window where we may not read correct higher order bits if the lower order bits are just about to wrap around. This patch fixes this by reading higher order bits twice and makes sure that final value is correctly paired with its lower 32 bits. Fixes: 30e96f487f64 ("bnxt_en: Do not read the PTP PHC during chip reset") Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix and simplify XDP transmit pathMichael Chan
Fix the missing length hint in the TX BD for the XDP transmit path. The length hint is required on legacy chips. Also, simplify the code by eliminating the first_buf local variable. tx_buf contains the same value. The opaque value only needs to be set on the first BD. Fix this also for correctness. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: fix livepatch queryVikas Gupta
In the livepatch query fw_target BNXT_FW_SRT_PATCH is applicable for P5 chips only. Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix bnxt_reinit_after_abort() code pathMichael Chan
bnxt_reinit_after_abort() is called during ifup when a previous FW reset sequence has aborted or a previous ifup has failed after detecting FW reset. In all cases, it is safe to assume that a previous FW reset has completed and the driver may not have fully reinitialized. Prior to this patch, it is assumed that the FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE flag will always be set by the firmware in bnxt_hwrm_if_change(). This may not be true if the driver has already attempted to register with the firmware. The firmware may not set the RESET_DONE flag again after the driver has registered, assuming that the driver has seen the flag already. Fix it to always go through the FW reset initialization path if the BNXT_STATE_FW_RESET_DET flag is set. This flag is always set by the driver after successfully going through bnxt_reinit_after_abort(). Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: reclaim max resources if sriov enable failsKashyap Desai
If bnxt_sriov_enable() fails after some resources have been reserved for the VFs, the current code is not unwinding properly and the reserved resources become unavailable afterwards. Fix it by properly unwinding with a call to bnxt_hwrm_func_qcaps() to reset all maximum resources. Also, add the missing bnxt_ulp_sriov_cfg() call to let the RDMA driver know to abort. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06bnxt: Use the bitmap API to allocate bitmapsChristophe JAILLET
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d508f3adf7e2804f4d3793271b82b196a2ccb940.1657052562.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>