summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnxt
AgeCommit message (Collapse)Author
2022-01-26bnxt_en: Add driver support to use Real Time Counter for PTPPavan Chebbi
Add support for RTC mode if it is supported by firmware. In RTC mode, the PHC is set to the 64-bit clock. Because the legacy interface is 48-bit, the driver still has to keep track of the upper 16 bits and handle the rollover. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: PTP: Refactor PTP initialization functionsPavan Chebbi
Making the ptp free and timecounter initialization code into separate functions so that later patches can use them. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Update firmware interface to 1.10.2.73Michael Chan
The main changes are PTP support for RTC, additional NVM error codes, backing store v2 firmware APIs. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09bnxt_en: improve firmware timeout messagingEdwin Peer
While it has always been possible to infer that an HWRM command was abandoned due to an unhealthy firmware status by the shortened timeout reported, this change improves the log messaging to account for this case explicitly. In the interests of further clarity, the firmware status is now also reported in these new messages. v2: Remove inline keyword for hwrm_wait_must_abort() in .c file. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09bnxt_en: use firmware provided max timeout for messagesEdwin Peer
Some older devices cannot accommodate the 40 seconds timeout cap for long running commands (such as NVRAM commands) due to hardware limitations. Allow these devices to request more time for these long running commands, but print a warning, since the longer timeout may cause the hung task watchdog to trigger. In the case of a firmware update operation, this is preferable to failing outright. v2: Use bp->hwrm_cmd_max_timeout directly without the constants. Fixes: 881d8353b05e ("bnxt_en: Add an upper bound for all firmware command timeouts.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09bnxt_en: improve VF error messages when PF is unavailableEdwin Peer
The current driver design relies on the PF netdev being open in order to intercept the following HWRM commands from a VF: - HWRM_FUNC_VF_CFG - HWRM_CFA_L2_FILTER_ALLOC - HWRM_PORT_PHY_QCFG (only if FW_CAP_LINK_ADMIN is not supported) If the PF is closed, then VFs are subjected to rather inscrutable error messages in response to any configuration requests involving the above command types. Recent firmware distinguishes this problem case from other errors by returning HWRM_ERR_CODE_PF_UNAVAILABLE. In most cases, the appropriate course of action is still to fail, but this can now be accomplished with the aid of more user informative log messages. For L2 filter allocations that are already asynchronous, an automatic retry seems more appropriate. v2: Delete extra newline. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09bnxt_en: add dynamic debug support for HWRM messagesEdwin Peer
Add logging of firmware messages. These can be useful for diagnosing issues in the field, but due to their verbosity are only appropriate at a debug message level. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: Don't include filter.h from net/sock.hJakub Kicinski
sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-12-27bnxt_en: Use page frag RX buffers for better software GRO performanceJakub Kicinski
If NETIF_F_GRO_HW is disabled, the existing driver code uses kmalloc'ed data for RX buffers. This causes inefficient SW GRO performance because the GRO data is merged using the less efficient frag_list. Use netdev_alloc_frag() and friends instead so that GRO data can be merged into skb_shinfo(skb)->frags for better performance. [Use skb_free_frag() - Vikas Gupta] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: convert to xdp_do_flushEdwin Peer
The xdp_do_flush_map function has been replaced with the more general xdp_do_flush(). Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Support CQE coalescing mode in ethtoolMichael Chan
Support showing and setting the CQE mode in ethtool. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Support configurable CQE coalescing modeMichael Chan
CQE coalescing mode is the same as the timer reset coalescing mode on Broadcom devices. Currently this mode is always enabled if it is supported by the device. Restructure the code slightly to support dynamically changing this mode. Add a flags field to struct bnxt_coal. Initially, the CQE flag will be set for the RX and TX side if the device supports it. We need to move bnxt_init_dflt_coal() to set up default coalescing until the capability is determined. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: enable interrupt sampling on 5750X for DIMAndy Gospodarek
5750X (P5) chips handle receiving packets on the NQ rather than the main completion queue so we need to get and set stats from the correct spots for dynamic interrupt moderation. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Log error report for dropped doorbellMichael Chan
Log the unrecognized error report type value as well. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Add event handler for PAUSE Storm eventSomnath Kotur
FW has been modified to send a new async event when it detects a pause storm. Register for this new event and log it upon receipt. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: reject to offload tc actions in offload driversBaowen Zheng
A follow-up patch will allow users to offload tc actions independent of classifier in the software datapath. In preparation for this, teach all drivers that support offload of the flow tables to reject such configuration as currently none of them support it. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16bnxt_en: Fix compile error regression when CONFIG_BNXT_SRIOV is not setMichael Chan
bp->sriov_cfg is not defined when CONFIG_BNXT_SRIOV is not set. Fix it by adding a helper function bnxt_sriov_cfg() to handle the logic with or without the config option. Fixes: 46d08f55d24e ("bnxt_en: extend RTNL to VF check in devlink driver_reinit") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1637090770-22835-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16net: move gro definitions to include/net/gro.hEric Dumazet
include/linux/netdevice.h became too big, move gro stuff into include/net/gro.h Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15bnxt_en: reject indirect blk offload when hw-tc-offload is offSriharsha Basavapatna
The driver does not check if hw-tc-offload is enabled for the device before offloading a flow in the context of indirect block callback. Fix this by checking NETIF_F_HW_TC in the features flag and rejecting the offload request. This will avoid unnecessary dmesg error logs when hw-tc-offload is disabled, such as these: bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15bnxt_en: fix format specifier in live patch error messageEdwin Peer
This fixes type mismatch warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15bnxt_en: extend RTNL to VF check in devlink driver_reinitEdwin Peer
The fixes the race condition between configuring SR-IOV and devlink reload. The SR-IOV configure logic already takes the RTNL lock, setting sriov_cfg under the lock while changes are underway. Extend the lock scope in devlink driver_reinit to cover the VF check and don't run concurrently with SR-IOV configure. Reported-by: Leon Romanovsky <leon@kernel.org> Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit") Cc: Leon Romanovsky <leon@kernel.org> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-02bnxt_en: avoid newline at end of message in NL_SET_ERR_MSG_MODWan Jiabing
Fix following coccicheck warning: ./drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:446:8-56: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211102020312.16567-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-02Merge tag 'net-next-for-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...
2021-11-01Merge tag 'overflow-v5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "The end goal of the current buffer overflow detection work[0] is to gain full compile-time and run-time coverage of all detectable buffer overflows seen via array indexing or memcpy(), memmove(), and memset(). The str*() family of functions already have full coverage. While much of the work for these changes have been on-going for many releases (i.e. 0-element and 1-element array replacements, as well as avoiding false positives and fixing discovered overflows[1]), this series contains the foundational elements of several related buffer overflow detection improvements by providing new common helpers and FORTIFY_SOURCE changes needed to gain the introspection required for compiler visibility into array sizes. Also included are a handful of already Acked instances using the helpers (or related clean-ups), with many more waiting at the ready to be taken via subsystem-specific trees[2]. The new helpers are: - struct_group() for gaining struct member range introspection - memset_after() and memset_startat() for clearing to the end of structures - DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs Also included is the beginning of the refactoring of FORTIFY_SOURCE to support memcpy() introspection, fix missing and regressed coverage under GCC, and to prepare to fix the currently broken Clang support. Finishing this work is part of the larger series[0], but depends on all the false positives and buffer overflow bug fixes to have landed already and those that depend on this series to land. As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time and run-time tests are added for FORTIFY_SOURCE and the mem*()-family functions respectively. The compile time tests have found a legitimate (though corner-case) bug[6] already. Please note that the appearance of "panic" and "BUG" in the FORTIFY_SOURCE refactoring are the result of relocating existing code, and no new use of those code-paths are expected nor desired. Finally, there are two tree-wide conversions for 0-element arrays and flexible array unions to gain sane compiler introspection coverage that result in no known object code differences. After this series (and the changes that have now landed via netdev and usb), we are very close to finally being able to build with -Warray-bounds and -Wzero-length-bounds. However, due corner cases in GCC[3] and Clang[4], I have not included the last two patches that turn on these options, as I don't want to introduce any known warnings to the build. Hopefully these can be solved soon" Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1] Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2] Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3] Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4] Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5] Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6] * tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits) fortify: strlen: Avoid shadowing previous locals compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer treewide: Replace 0-element memcpy() destinations with flexible arrays treewide: Replace open-coded flex arrays in unions stddef: Introduce DECLARE_FLEX_ARRAY() helper btrfs: Use memset_startat() to clear end of struct string.h: Introduce memset_startat() for wiping trailing members and padding xfrm: Use memset_after() to clear padding string.h: Introduce memset_after() for wiping trailing members/padding lib: Introduce CONFIG_MEMCPY_KUNIT_TEST fortify: Add compile-time FORTIFY_SOURCE tests fortify: Allow strlen() and strnlen() to pass compile-time known lengths fortify: Prepare to improve strnlen() and strlen() warnings fortify: Fix dropped strcpy() compile-time write overflow check fortify: Explicitly disable Clang support fortify: Move remaining fortify helpers into fortify-string.h lib/string: Move helper functions out of string.c compiler_types.h: Remove __compiletime_object_size() cm4000_cs: Use struct_group() to zero struct cm4000_dev region can: flexcan: Use struct_group() to zero struct flexcan_regs regions ...
2021-10-29bnxt_en: Remove not used other ULP defineLeon Romanovsky
There is only one bnxt ULP in the upstream kernel and definition for other ULP can be safely removed. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/3a8ea720b28ec4574648012d2a00208f1144eff5.1635527693.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-29bnxt_en: Provide stored devlink "fw" version on older firmwareVikas Gupta
On older firmware that doesn't support the HWRM_NVM_GET_DEV_INFO command that returns detailed stored firmware versions, fallback to use the same firmware package version that is reported to ethtool. Refactor bnxt_get_pkgver() in bnxt_ethtool.c so that devlink can call and get the package version. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement firmware live patchingEdwin Peer
Live patches are activated by using the 'limit no_reset' option when performing a devlink dev reload fw_activate operation. These packages must first be installed on the device in the usual way. For example, via devlink dev flash or ethtool -f. The devlink device info has also been enhanced to render stored and running live patch versions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Update firmware interface to 1.10.2.63Michael Chan
The main changes are firmware live patch support and 2 additional FEC standard counters. Add the matching FEC counters to ethtool counter array. Firmware older than 220 does not return the proper size of the extended RX counters so we need to cap it at the smaller legacy size. Otherwise the new FEC counters may show up with garbage values. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement dump callback for fw health reporterEdwin Peer
Populate the dump with firmware 'live' coredump data. This includes the information stored in NVRAM by the firmware exception handler prior to recovery. Thus, the live dump includes the desired crash context. Firmware does not support HWRM calls after RESET_NOTIFY, so there is no supported way to capture a coredump during the auto dump phase. Detect this and abort when called from devlink_health_report(). Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: extract coredump command line from current taskEdwin Peer
Tools other than 'ethtool -w' may be used to produce a coredump. For devlink health, such dumps could even be driver initiated in response to a health event. In these cases, the kernel thread information will be placed in the coredump record instead. v2: use min_t() instead of min() to fix the mismatched type warning Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Retrieve coredump and crashdump size via FW commandVasundhara Volam
Recent firmware provides coredump and crashdump size info via DBG_QCFG command. Read the dump sizes from firmware, instead of computing in the driver. This patch reduces the time taken to collect the dump via ethtool. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Add compression flags information in coredump segment headerVasundhara Volam
Firmware sets compression flags for each segment, add this information while filling segment header. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: move coredump functions into dedicated fileEdwin Peer
Change bnxt_get_coredump() and bnxt_get_coredump_length() to non-static functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Refactor coredump functionsEdwin Peer
The coredump functionality will be used by devlink health. Refactor these functions that get coredump and coredump length. There is no functional change, but the following checkpatch warnings were addressed: - strscpy is preferred over strlcpy. - sscanf results should be checked, with an additional warning. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: improve fw diagnose devlink health messagesEdwin Peer
Add firmware event counters as well as health state severity. In the unhealthy state, recommend a remedy and inform the user as to its impact. Readability of the devlink tool's output is negatively impacted by adding these fields to the diagnosis. The single line of text, as rendered by devlink health diagnose, benefits from more terse descriptions, which can be substituted without loss of clarity, even in pretty printed JSON mode. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: consolidate fw devlink health reportersEdwin Peer
Merge 'fw' and 'fw_fatal' health reporters. There is no longer a need to distinguish between firmware reporters. Only bonafide errors are reported now and no reports were being generated for the 'fw' reporter. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: remove fw_reset devlink health reporterEdwin Peer
Firmware resets initiated by the user are not errors and should not be reported via devlink. Once only unsolicited resets remain, it is no longer sensible to maintain a separate fw_reset reporter. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: improve error recovery information messagesEdwin Peer
The recovery election messages are often mistaken for errors. Improve the wording to clarify the meaning of these frequent and expected events. Also, take the first step towards more inclusive language. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: add enable_remote_dev_reset devlink parameterEdwin Peer
The reported parameter value should not take into account the state of remote drivers. Firmware will reject remote resets as appropriate, thus it is not strictly necessary to check HOT_RESET_ALLOWED before attempting to initiate a reset. But we add the check so that we can provide more intuitive messages when reset is not permitted. This firmware setting needs to be restored from all functions after a firmware reset. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload fw_activateEdwin Peer
Similar to reload driver_reinit, the RTNL lock is held across reload down and up to prevent interleaving state changes. But we need to subsequently release the RTNL lock while waiting for firmware reset to complete. Also keep a statistic on fw_activate resets initiated remotely from other functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload driver_reinitEdwin Peer
The RTNL lock must be held between down and up to prevent interleaving state changes, especially since external state changes might release and allocate different driver resource subsets that would otherwise need to be tracked and carefully handled. If the down function fails, then devlink will not call the corresponding up function, thus the lock is released in the down error paths. v2: Don't use devlink_reload_disable() and devlink_reload_enable(). Instead, check that the netdev is not in unregistered state before proceeding with reload. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-Off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor cancellation of resource reservationsEdwin Peer
Resource reservations will also need to be reset after FUNC_DRV_UNRGTR in the following devlink driver_reinit patch. Extract this logic into a reusable function. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor printing of device infoEdwin Peer
The device info logged during probe will be reused by the devlink driver_reinit code in a following patch. Extract this logic into the new bnxt_print_device_info() function. The board index needs to be saved in the driver context so that the board information can be retrieved at a later time, outside of the probe function. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-10bnxt: use netif_is_rxfh_configured instead of open codeJuhee Kang
The open code which is dev->priv_flags & IFF_RXFH_CONFIGURED is defined as a helper function on netdevice.h. So use netif_is_rxfh_configured() function instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 07:23:22 +0000