summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
AgeCommit message (Collapse)Author
2023-06-21bnxt_en: Link representors to PCI deviceIvan Vecera
Link VF representors to parent PCI device to benefit from systemd defined naming scheme. Without this change the representor is visible as ethN. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230620144855.288443-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13bnxt_en: Allow to set switchdev mode without existing VFsIvan Vecera
Remove an inability of bnxt_en driver to set eswitch to switchdev mode without existing VFs by: 1. Allow to set switchdev mode in bnxt_dl_eswitch_mode_set() so representors are created only when num_vfs > 0 otherwise just set bp->eswitch_mode 2. Do not automatically change bp->eswitch_mode during bnxt_vf_reps_create() and bnxt_vf_reps_destroy() calls so the eswitch mode is managed only by an user by devlink. Just set temporarily bp->eswitch_mode to legacy to avoid re-opening of representors during destroy. 3. Create representors in bnxt_sriov_enable() if current eswitch mode is switchdev one Tested by this sequence: 1. Set PF interface up 2. Set PF's eswitch mode to switchdev 3. Created N VFs 4. Checked that N representors were created 5. Set eswitch mode to legacy 6. Checked that representors were deleted 7. Set eswitch mode back to switchdev 8. Checked that representors exist again for VFs 9. Deleted all VFs 10. Checked that all representors were deleted as well 11. Checked that current eswitch mode is still switchdev Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Link: https://lore.kernel.org/r/20230411120443.126055-1-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21devlink: hold the instance lock during eswitch_mode callbacksJakub Kicinski
Make the devlink core hold the instance lock during eswitch_mode callbacks. Cheat in case of mlx5 (see the cover letter). Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21bnxt: use the devlink instance lock to protect sriovJakub Kicinski
In prep for .eswitch_mode_set being called with the devlink instance lock held use that lock explicitly instead of creating a local mutex just for the sriov reconfig. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: update all firmware calls to use the new APIsEdwin Peer
The conversion follows this general pattern for most of the calls: 1. The input message is changed from a stack variable initialized using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized using hwrm_req_init(). 2. If we don't need to read the firmware response, the hwrm_send_message() call is replaced with hwrm_req_send(). 3. If we need to read the firmware response, the mutex lock is replaced by hwrm_req_hold() to hold the response. When the response is read, the mutex unlock is replaced by hwrm_req_drop(). If additional DMA buffers are needed for firmware response data, the hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent(). Some minor refactoring is also done while doing these conversions. v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings() and bnxt_approve_mac() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: move HWRM API implementation into separate fileEdwin Peer
Move all firmware messaging functions and definitions to new bnxt_hwrm.[ch]. The follow-on patches will make major modifications to these APIs. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Free and allocate VF-Reps during error recovery.Sriharsha Basavapatna
During firmware recovery, VF-Rep configuration in the firmware is lost. Fix it by freeing and (re)allocating VF-Reps in FW at relevant points during the error recovery process. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Refactor __bnxt_vf_reps_destroy().Michael Chan
Add a new helper function __bnxt_free_one_vf_rep() to free one VF rep. We also reintialize the VF rep fields to proper initial values so that the function can be used without freeing the VF rep data structure. This will be used in subsequent patches to free and recreate VF reps after error recovery. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Refactor bnxt_vf_reps_create().Sriharsha Basavapatna
Add a new function bnxt_alloc_vf_rep() to allocate a VF representor. This function will be needed in subsequent patches to recreate the VF reps after error recovery. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/broadcom: Clean broadcom code from driver versionsLeon Romanovsky
Use linux kernel version for ethtool and module versions. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26bnxt_en: add newline to netdev_*() format stringsJonathan Lemon
Add missing newlines to netdev_* format strings so the lines aren't buffered by the printk subsystem. Nitpicked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-18bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.Michael Chan
DSN read can fail, for example on a kdump kernel without PCIe extended config space support. If DSN read fails, don't set the BNXT_FLAG_DSN_VALID flag and continue loading. Check the flag to see if the stored DSN is valid before using it. Only VF reps creation should fail without valid DSN. Fixes: 03213a996531 ("bnxt: move bp->switch_id initialization to PF probe") Reported-by: Marc Smith <msmith626@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09drivers: net: use flow block APIPablo Neira Ayuso
This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: add flow_block_cb_setup_simple()Pablo Neira Ayuso
Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04bnxt: move bp->switch_id initialization to PF probeJiri Pirko
Currently the switch_id is being only initialized when switching eswitch mode from "legacy" to "switchdev". However, nothing prevents the id to be initialized from the very beginning. Physical ports can show it even in "legacy" mode. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06bnxt: Implement ndo_get_port_parent_id()Florian Fainelli
BNXT only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). The conversion is straight forward here since the PF and VF code use the same getter. Since bnxt makes uses of switchdev_port_same_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03devlink: Add extack for eswitch operationsEli Britstein
Add extack argument to the eswitch related operations. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-01bnxt_en: remove set but not used variable 'rx_stats'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c: In function 'bnxt_vf_rep_rx': drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:212:28: warning: variable 'rx_stats' set but not used [-Wunused-but-set-variable] struct bnxt_vf_rep_stats *rx_stats; Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05bnxt_en: Add bnxt_en initial params table and register it.Vasundhara Volam
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: sched: pass extack pointer to block binds and cb registrationJohn Hurley
Pass the extact struct from a tc qdisc add to the block bind function and, in turn, to the setup_tc ndo of binding device via the tc_block_offload struct. Pass this back to any block callback registrations to allow netlink logging of fails in the bind process. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-11bnxt_en: Support max-mtu with VF-repsSriharsha Basavapatna
While a VF is configured with a bigger mtu (> 1500), any packets that are punted to the VF-rep (slow-path) get dropped by OVS kernel-datapath with the following message: "dropped over-mtu packet". Fix this by returning the max-mtu value for a VF-rep derived from its corresponding VF. VF-rep's mtu can be changed using 'ip' command as shown in this example: $ ip link set bnxt0_pf0vf0 mtu 9000 Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25bnxt: use tc_cls_can_offload_and_chain0()Jakub Kicinski
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17bnxt_en: export a common switchdev PARENT_ID for all reps of an adapterSathya Perla
Currently the driver exports different switchdev PARENT_IDs for representors belonging to different SR-IOV PF-pools of an adapter. This is not correct as the adapter can switch across all vports of an adapter. This patch fixes this by exporting a common switchdev PARENT_ID for all reps of an adapter. The PCIE DSN is used as the id. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08bnxt: delete some unreachable codeDan Carpenter
We return on the previous line so this "return 0;" statement should just be deleted. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: sched: move the can_offload check from binding phase to rule insertion ↵Jiri Pirko
phase This restores the original behaviour before the block callbacks were introduced. Allow the drivers to do binding of block always, no matter if the NETIF_F_HW_TC feature is on or off. Move the check to the block callback which is called for rule insertion. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28bnxt_en: alloc tc_info{} struct only when tc flower is enabledSathya Perla
TC flower is not enabled on VFs and when there's no FW support. Alloc the tc_info{} struct at init time only when TC flower is being enabled. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21bnxt: Move generic devlink code to new fileSteve Lin
Moving generic devlink code (registration) out of VF-R code into new bnxt_devlink file, in preparation for future work to add additional devlink functionality to bnxt. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Acked-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: sched: avoid ndo_setup_tc calls for TC_SETUP_CLS*Jiri Pirko
All drivers are converted to use block callbacks for TC_SETUP_CLS*. So it is now safe to remove the calls to ndo_setup_tc from cls_* Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21bnxt: Convert ndo_setup_tc offloads to block callbacksJiri Pirko
Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for flower offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28bnxt_en: bnxt: add TC flower filter offload supportSathya Perla
This patch adds support for offloading TC based flow rules and actions for the 'flower' classifier in the bnxt_en driver. It includes logic to parse flow rules and actions received from the TC subsystem, store them and issue the corresponding hwrm_cfa_flow_alloc/free FW cmds. L2/IPv4/IPv6 flows and drop, redir, vlan push/pop actions are supported in this patch. In this patch the hwrm_cfa_flow_xxx routines are just stubs. The code for these routines is introduced in the next patch for easier review. Also, the code to query the TC/flower action stats will be introduced in a subsequent patch. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28bnxt_en: fix clearing devlink ptr from bnxt structSathya Perla
The routine bnxt_link_bp_to_dl() is used to set the devlink ptr in bnxt struct (bp) and also to set the bnxt back ptr in the devlink struct. If devlink_register() fails, bp->dl must be cleared which is not happening currently. This patch fixes bnxt_link_bp_to_dl() to clear bp->dl by passing a NULL dl ptr. Fixes: 4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors") Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19bnxt_en: fix spelling mistake: "swtichdev" -> "switchdev"Colin Ian King
Trivial fix to spelling mistake in a netdev_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25bnxt_en: fix switchdev port naming for external-port-rep and vf-repsSathya Perla
Fix the phys_port_name for the external physical port to be in "pA" format and that of VF-rep to be in "pCvfD" format as suggested by Jakub Kicinski. Fixes: c124a62ff2dd ("bnxt_en: add support for port_attr_get and get_phys_port_name") Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25bnxt_en: use SWITCHDEV_SET_OPS() for setting vf_rep_switchdev_opsSathya Perla
This fixes the build error: ‘struct net_device’ has no member named ‘switchdev_ops’ Reported-by: kbuild test robot <lkp@intel.com> Fixes: c124a62ff2dd ("bnxt_en: add support for port_attr_get and and get_phys_port_name") Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25bnxt_en: include bnxt_vfr.c code under CONFIG_BNXT_SRIOV switchSathya Perla
And define empty functions in bnxt_vfr.h when CONFIG_BNXT_SRIOV is not defined. This fixes build error when CONFIG_BNXT_SRIOV is switched off: >> drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:165:16: error: 'struct >> bnxt' has no member named 'sriov_lock' Reported-by: kbuild test robot <lkp@intel.com> Fixes: 4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors") Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24bnxt_en: add support for port_attr_get and and get_phys_port_nameSathya Perla
This patch adds support for the switchdev_port_attr_get() and ndo_get_phys_port_name() methods for the PF and the VF-reps. Using this support a user application can deduce that the PF (when in the ESWITCH_SWDEV mode) and it's VF-reps form a switch. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24bnxt_en: add vf-rep RX/TX and netdev implementationSathya Perla
This patch introduces the RX/TX and a simple netdev implementation for VF-reps. The VF-reps use the RX/TX rings of the PF. For each VF-rep the PF driver issues a VFR_ALLOC FW cmd that returns "cfa_code" and "cfa_action" values. The FW sets up the filter tables in such a way that VF traffic by default (in absence of other rules) gets punted to the parent PF. The cfa_code value in the RX-compl informs the driver of the source VF. For traffic being transmitted from the VF-rep, the TX BD is tagged with a cfa_action value that informs the HW to punt it to the corresponding VF. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24bnxt_en: add support to enable VF-representorsSathya Perla
This patch is a part of a patch-set that introduces support for VF-reps in the bnxt_en driver. The driver registers eswitch mode get/set methods with the devlink interface that allow a user to enable SRIOV switchdev mode. When enabled, the driver registers a VF-rep netdev object for each VF with the stack. This can essentially bring the VFs unders the management perview of the hypervisor and applications such as OVS. The next patch in the series, adds the RX/TX routines and a slim netdev implementation for the VF-reps. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:19:33 +0000