summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
AgeCommit message (Collapse)Author
2015-03-31ptp: bnx2x: convert to the 64 bit get/set time methods.Richard Cochran
This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: Move check for multiple vlans to driversToshiaki Makita
To allow drivers to handle the features check for multiple tags, move the check to ndo_features_check(). As no drivers currently handle multiple tagged TSO, introduce dflt_features_check() and call it if the driver does not have ndo_features_check(). Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23bnx2x: Fix statistics locking schemeYuval Mintz
Statistics' state-machine in bnx2x driver must be synced with various driver flows, but its current locking scheme manages to be wasteful [using 2 locks + additional local variable] and prone to race-conditions at the same time, as the state-machine and 'action' are being accessed under different locks. In addition, current 'safe exec' isn't in fact safe, since the only guarantee it gives is that DMA transactions are over, but ramrods might still be running. This patch cleans up said logic, leaving us with a single lock for the entire flow and removing the possible races. Changes from v2: - Switched into mutex locking from semaphore locking. - Release locks on error flows. Changes from v1: Failure to acquire lock fails flow instead of printing a warning and allowing access to the critical section. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16bnx2x: fix encapsulation features on 57710/57711Michal Schmidt
E1x chips (57710, 57711(E)) have no support for encapsulation offload. bnx2x incorrectly advertises the support as available. Setting of those features is conditional on "!CHIP_IS_E1x(bp)", but the bp struct is not initialized yet at this point and consequently any chip passes the check. The check must use the "chip_is_e1x" local variable instead to work correctly. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cadence/macb.c Overlapping changes in macb driver, mostly fixes and cleanups in 'net' overlapping with the integration of at91_ether into macb in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05bnx2x: Force fundamental reset for EEH recoveryBrian King
EEH recovery for bnx2x based adapters is not reliable on all Power systems using the default hot reset, which can result in an unrecoverable EEH error. Forcing the use of fundamental reset during EEH recovery fixes this. Cc: stable<stable@vger.kernel.org> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03ethernet: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net: bnx2x: fix sparse warningsLad, Prabhakar
this patch fixes following sparse warnings: bnx2x_main.c:9172:6: warning: symbol 'bnx2x_stop_ptp' was not declared. Should it be static? bnx2x_main.c:13321:6: warning: symbol 'bnx2x_register_phc' was not declared. Should it be static? bnx2x_main.c:14638:5: warning: symbol 'bnx2x_enable_ptp_packets' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02bnx2x: convert to CYCLECOUNTER_MASK macro.Richard Cochran
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: bnx2x: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-26net: Generalize ndo_gso_check to ndo_features_checkJesse Gross
GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert <therbert@google.com> CC: Joe Stringer <joestringer@nicira.com> CC: Eric Dumazet <edumazet@google.com> CC: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Tom Herbert <therbert@google.com> Fixes: 04ffcb255f22 ("net: Add ndo_gso_check") Tested-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18bnx2x: fix typos in "configure"Jiri Benc
Noticed when debugging ptp. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09bnx2x: Implement ndo_gso_check()Joe Stringer
Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09bnx2x: Use correct fastpath version for VFs.Yuval Mintz
Our FW can support several fastpath HSI [for backward compatibility] but up until now VFs were always configured to use latest fastpath HSI [although VF driver might be older and use an older fastpath HSI]. For linux drivers, the differences are insignificant since driver never utilized features that were overridden by the HSI change. But for VMs running other operating systems this might be a problem. In addition, eventually FW might change fastpath HSI in such a manner that backward compatibility WILL break unless configured with proper version. This patch fixes the issue for other operating system VMs, as well as lays the ground work for forward compatibility in regard to the fastpath HSI. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02net: rename netdev_phys_port_id to more generic nameJiri Pirko
So this can be reused for identification of other "items" as well. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30bnx2x: use napi_schedule_irqoff()Eric Dumazet
bnx2x_msix_fp_int() and bnx2x_interrupt() run from hard interrupt context. They can use napi_schedule_irqoff() instead of napi_schedule() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: Add a fallback multi-function mode NPAR1.5Yuval Mintz
When using new Multi-function modes it's possible that due to incompatible configuration management FW will fallback into an existing mode. Notice that at the moment this fallback is exactly the same as the already existing switch-independent multi-function mode, but we still use existing infrastructure to hold this information [in case some small differences will arise in the future]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: New multi-function mode: UFPYuval Mintz
Add support for a new multi-function mode based on the Unified Fabric Port system specifications. Support includes configuration of: 1. Outer vlan tags. 2. Bandwidth settings. 3. Virtual link enable/disable. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: Changes with storage & MAC macrosDmitry Kravkov
Rearrange macros to query for storage-only modes in different MF environment. Improves the readibility and maintainability of the code. E.g.: - if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)) + if (IS_MF_STORAGE_ONLY(bp)) In addition, this removes the need for bnx2x_is_valid_ether_addr(). Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-09-02bnx2x: Configure device endianity on driver load and reset endianity on removal.Manish Chopra
Some hosts can be both little and big endian. In certain scenarios a big endian kernel can kexec a little endian kernel. This patch fixes this case from both ends: 1) Return endianity to original values on shutdown (in case little endian kernel boots after we shutdown). 2) Do not rely on HW reset values when loading driver in little endian kernel but configure them explicitly (in case previous kernel was big endian and did not reset the HW). Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27bnx2x: Fix static checker warning regarding `txdata_ptr'Yuval Mintz
Incorrect checking of array instead of array contents in panic_dump flow - results of commit e261199872a2 ("bnx2x: Safe bnx2x_panic_dump()"). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25bnx2x: Fix stop-on-errorYuval Mintz
When STOP_ON_ERROR is set driver will not compile. Even if it did, traffic will not pass without this patch as several fields which are verified by FW/HW on the Tx path are not properly set. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25net/bnx2x: Use is_kdump_kernel() to detect kdump kernelAmir Vadai
Use is_kdump_kernel() to detect kdump kernel, instead of reset_devices. CC: Ariel Elior <ariel.elior@qlogic.com> CC: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Pulling to get some TIPC fixes that a net-next series depends upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: FW assertion changesAriel Elior
This is mostly a semantic change which modifies the code parsing and printing of FW asserts. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Safe bnx2x_panic_dump()Yuval Mintz
The bnx2x panic dump spills a lot of information from the driver's fastpath, but may be called while some of the fastpath is uninitialized. This patch verifies that pointers are already allocated before dereferencing them to prevent possible kernel panics. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Code cleanupYuval Mintz
This patch does several semantic things: - Fixing typos. - Removing unnecessary prints. - Removing unused functions and definitions. - Change 'strange' usage of boolean variables. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Add timestamping and PTP hardware clock supportMichal Kalderon
This adds a PHC to the bnx2x driver. Driver supports timestamping send/receive PTP packets, as well as adjusting the on-chip clock. The driver has been tested with linuxptp project. Signed-off-by: Michal Kalderon <Michal.Kalderon@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Utilize FW 7.10.51Dmitry Kravkov
- (L2) In some multi-function configurations, inter-PF and inter-VF Tx switching is incorrectly enabled. - (L2) Wrong assert code in FLR final cleanup in case it is sent not after FLR. - (L2) Chip may stall in very rare cases under heavy traffic with FW GRO enabled. - (L2) VF malicious notification error fixes. - (L2) Default gre tunnel to IPGRE which allows proper RSS for IPGRE packets, L2GRE traffic will reach single queue. - (FCoE) Fix data being placed in wrong buffer when corrupt FCoE frame is received. - (FCoE) Burst of FIP packets with destination MAC of ALL-FCF_MACs causes FCoE traffic to stop. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21bnx2x: Revert UNDI flushing mechanismYuval Mintz
Commit 91ebb929b6f8 ("bnx2x: Add support for Multi-Function UNDI") [which was later supposedly fixed by de682941eef3 ("bnx2x: Fix UNDI driver unload")] introduced a bug in which in some [yet-to-be-determined] scenarios the alternative flushing mechanism which was to guarantee the Rx buffers are empty before resetting them during device probe will fail. If this happens, when device will be loaded once more a fatal attention will occur; Since this most likely happens in boot from SAN scenarios, the machine will fail to load. Notice this may occur not only in the 'Multi-Function' scenario but in the regular scenario as well, i.e., this introduced a regression in the driver's ability to perform boot from SAN. The patch reverts the mechanism and applies the old scheme to multi-function devices as well as to single-function devices. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01bnx2x: VF can report link speedDmitry Kravkov
Until now VFs were oblvious to the actual configured link parameters. This patch does 2 things: 1. It enables a PF to inform its VF using the bulletin board of the link configured, and allows the VF to present that information. 2. It adds support of `ndo_set_vf_link_state', allowing the hypervisor to set the VF link state. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-26bnx2x: Fix the MSI flagsYijing Wang
MSI-X should use PCI_MSIX_FLAGS not PCI_MSI_FLAGS. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-12bnx2x: Check for UNDI in uncommon branchYuval Mintz
If L2FW utilized by the UNDI driver has the same version number as that of the regular FW, a driver loading after UNDI and receiving an uncommon answer from management will mistakenly assume the loaded FW matches its own requirement and try to exist the flow via FLR. Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03bnx2x: Adapter not recovery from EEH error injectionwenxiong@linux.vnet.ibm.com
When injecting EEH error to bnx2x adapter, adapter couldn't be recovery and caused recursive EEH errors. The patch fixes the issue. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-05-30bnx2x: update MAINTAINERS for bnx2x and e-mail addressesAriel Elior
The bnx2x development team has transferred from Broadcom to Qlogic. This patch updates some obsolete email addresses to usable ones. The bnx2x files contain headers with legal information from Broadcom. Qlogic Legal depratment is taking their time coming up with their own legal info. So this patch only updates contact information. I will follow up with a patch for the headers once I have the required info. Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09bnx2x: Fix UNDI driver unloadYuval Mintz
Commit 91ebb928b "bnx2x: Add support for Multi-Function UNDI" contains a bug which prevent the emptying of the device's Rx buffers before reset. As a result, on new boards it is likely HW will reach some fatal assertion once its interfaces load after UNDI was previously loaded. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26bnx2x: Memory leak during VF removalYuval Mintz
When removing a VF interface, the driver fails to release that VF's mailbox and bulletin board allocated memory. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-25bnx2x: Remove the sriov VFOP mechanismYuval Mintz
Since we now posses a workqueue dedicated for sriov, the paradigm that sriov- related tasks cannot sleep is no longer correct. The VFOP mechanism was the one previously supporting said paradigm - the sriov related tasks were broken into segments which did not require sleep, and the mechanism re-scheduled the next segment whenever possible. This patch remvoes the VFOP mechanism altogether - the resulting code is a much easier to follow code; The segments are gathered into straight-forward functions which sleep whenever neccessary. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25bnx2x: Create workqueue for IOV related tasksYuval Mintz
The bnx2x sriov mechanisms were done in the bnx2x slowpath workitem which runs on the bnx2x's workqueue; This workitem is also responsible for the bottom half of interrupt handling in the driver, and specifically it also receives FW notifications of ramrod completions, allowing other flows to progress. The original design of the sriov reltaed-flows was based on the notion such flows must not sleep, since their context is the slowpath workitem. Otherwise, we might reach timeouts - those flows may wait for ramrod completion that will never arrive as the workitem wlll not be re-scheduled until that same flow will be over. In more recent time bnx2x started supporting features in which the VF interface can be configured by the tools accessing the PF on the hypervisor. This support created possible races on the VF-PF lock (which is taken either when the PF is handling a VF message or when the PF is doing some slowpath work on behalf of the VF) which may cause timeouts on the VF side and lags on the PF side. This patch changes the scheme - it creates a new workqueue for sriov related tasks and moves all handling currently done in the slowpath task into the the new workqueue. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25bnx2x: Support mng. request for driver versionYuval Mintz
This adds support in a new management feature which needs the driver versions (bnx2x, bnx2fc and bnx2i) loaded for each interface. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26bnx2x: save RAM in kdump kernel by disabling TPAMichal Schmidt
When running in a kdump kernel, disable TPA. This saves memory, which tends to be scarce in kdump. TPA, being a receive acceleration, is unlikely to be useful for kdump, whose purpose is to send the memory image out. This saves additional 5 MB in the kdump environment. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 00:22:04 +0000