summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
AgeCommit message (Collapse)Author
2012-09-10bnx2x: add EEE support for 4-port devicesYuval Mintz
Prevent functions from disabling EEE to other functions using other ports. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10bnx2x: EEE status is read locallyYuval Mintz
This patch aligns the EEE status with that of all other link properties, by changing the way its accessed - instead of a direct read to the shared memory, each function maintain its own copy locally. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23bnx2x: Add new 57840 device IDsYuval Mintz
The 57840 boards come in two flavours: 2 x 20G and 4 x 10G. To better differentiate between the two flavours, a separate device ID was assigned to each. The silicon default value is still the currently supported 57840 device ID (0x168d), and since a user can damage the nvram (e.g., 'ethtool -E') the driver will still support this device ID to allow the user to amend the nvram back into a supported configuration. Notice this patch contains lines longer than 80 characters (strings). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c net/batman-adv/translation-table.c net/ipv6/route.c qmi_wwan.c resolution provided by Bjørn Mork. batman-adv conflict is dealing merely with the changes of global function names to have a proper subsystem prefix. ipv6's route.c conflict is merely two side-by-side additions of network namespace methods. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: link module eepromYuval Mintz
Add the ethtool functionality of accessing optic modules' information and eeprom to the bnx2x driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: 1G sfp+ module handlingYuval Mintz
Automatically lower requested link speed to 1G in case 1G SFP+ module is detected. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: revised link register accessYuval Mintz
This is a semantic change, cleaning some sections in which the bnx2x handles the phy's registers. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: treat 0 speed as link down (copper)Yuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: link cleanupYuval Mintz
This patch does several things: 1. Add static to function when possible. 2. Correct comments. 3. Change msleep(small) --> usleep_range(small, small*2). Also correct existing calls to usleep_range. 4. Remove dead code. 5. Change 'if(rc != 0)' --> if(rc) Most of these changes are purely semantic. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: sfp+ Tx fault detection addedYuval Mintz
Adds the ability to identify sfp+ modules' Tx fault, and when such occur shut down the link. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-17bnx2x: correct LPI pass-through configurationYuval Mintz
Commit c8c60d88c59cbb48737732ba948663a3efe882aa contained an incorrect logic which enabled a buffer overflow when accessing an array during LPI pass-through configuration. This patch fixes this issue by removing that logic altogether. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16bnx2x: fix link for BCM57711 with 84823 phyYuval Mintz
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16bnx2x: fix I2C non-respondent issueYuval Mintz
When I2C is not responding it's usually due to a previous unexpected reset during I2C operation. We release it by powering down and up the SFP+ module. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-07bnx2x: Added EEE supportYuval Mintz
This patch adds energy efficient energy support (802.3az) to bnx2x boards with 84833 phys (and sufficiently new BC and external FW). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23bnx2x: add afex supportBarak Witkowski
Following patch adds afex multifunction support to the driver (afex multifunction is based on vntag header) and updates FW version used to 7.2.51. Support includes the following: 1. Configure vif parameters in firmware (default vlan, vif id, default priority, allowed priorities) according to values received from NIC. 2. Configure FW to strip/add default vlan according to afex vlan mode. 3. Notify link up to OS only after vif is fully initialized. 4. Support vif list set/get requests and configure FW accordingly. 5. Supply afex statistics upon request from NIC. 6. Special handling to L2 interface in case of FCoE vif. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set()Dan Carpenter
The sp_pri_to_cos[] array size depends on the config but lets say it is BX_E3B0_MAX_NUM_COS_PORT0 and max_num_of_cos is also DCBX_E3B0_MAX_NUM_COS_PORT0. In the original code "pri == max_num_of_cos" was accepted but it is one past the end of the array. Also we used "pri" before capping it. It's a harmless read past the end of the array, but it would affect which error message gets printed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-04bnx2x: Clear MDC/MDIO warning messageYaniv Rosner
This patch clears a warning message of "MDC/MDIO access timeout" which may appear when interface is loaded due to missing clock setting before resetting the LED, and starting periodic function too early. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM57711+BCM84823 link issueYaniv Rosner
Fix a link problem on the second port of BCM57711 + BCM84823 boards due to incorrect macro usage. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Clear BCM84833 LED after fan failureYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM84833 PHY FW version presentationYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix link issue for BCM8727 boards.Yaniv Rosner
This patch fixes a link problem on BCM57712 + BCM8727 designs in which the TX laser is controller by GPIO, after 1.60.xx drivers were previously loaded. On these designs the TX_LASER is enabled by logic AND between the PHY (through MDIO), and the GPIO. When an old driver is used, it disables the MDIO part, hence the GPIO control had no affect de facto. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Restore 1G LED on BCM57712+BCM8727 designs.Yaniv Rosner
Fix no-LED problem when link speed is 1G on BCM57712 + BCM8727 designs, by removing a logic error checking for a different PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM578x0-SFI pre-emphasis settingsYaniv Rosner
Fix 578x0-SFI pre-emphasis settings per HW recommendations to achieve better link strength. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM57810-KR AN speed transitionYaniv Rosner
BCM57810-KR link may not come up in 1G after running loopback test, so set the relevant registers to their default values before starting KR autoneg. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM57810-KR FCYaniv Rosner
Fix 57810-KR flow-control handling link is achieved via CL37 AN. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: PFC fixYaniv Rosner
Fix a problem in which PFC frames are not honored, due to incorrect link attributes synchronization following PMF migration, and verify PFC XON is not stuck from previous link change. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Change comments and white spacesYaniv Rosner
A semantic patch, fixing style issues in the bnx2x's link code. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Add remote-fault link detectionYaniv Rosner
Restore remote-faule detection, which periodically checks for remote-fault on the MAC layer. In case physical link appear to be up but fault is set, it will provide a link down indication, and when the fault is cleared, it will indicate link up again. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-27bnx2x: previous driver unload revisedYuval Mintz
The flow in which the bnx2x driver starts after a previous driver has been terminated in an 'unclean' manner has several bugs and FW risks, which makes it possible for the driver to fail after boot-from-SAN or kdump. This patch contains a revised flow which performs a safer initialization, solving the possible crash scenarios. Notice this patch contains lines with over 80 characters, as it keeps print-strings in a single line. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: allow all functions to display the phy FW versionMintz Yuval
The phy FW version is stored in regular memory, no MDC-MDIO access or any special locks are required to read it in the current implementation. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertisedMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: added autoneg-restart after link advertisement changesMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: ethtool publishes link partners speed and FCMintz Yuval
Following the changes in the ethtool source code, this patch enables the bnx2x driver to publish the Link partner's capabilities s, when ethtool is used on an interface which completed autoneg. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: half duplex support added for several boardsMintz Yuval
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Several boards require an additional HW bit written in-order to enable half duplex. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26bnx2x: Update version to 1.72.0 and copyrightsAriel Elior
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Disable AN KR work-around for BCM57810Yaniv Rosner
Disable the work-around for the autoneg KR of the BCM57810 in case the Warpcore version is 0xD108 and above, which fixes this problem. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove AutoGrEEEn for BCM84833Yaniv Rosner
Disable the autoGrEEEn feature for BCM84833. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove 100Mb force speed for BCM84833Yaniv Rosner
Remove unsupported speed of 100Mb force for BCM84833 due to hardware limitation. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix PFC setting on BCM57840Yaniv Rosner
This patch handles the second port of a path in a 4-port device of BCM57840. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix Super-Isolate mode for BCM84833Yaniv Rosner
The Super-Isolate mode comes to isolate the BCM84833 PHY from the outside world. Not doing it correctly, made link partner see the link before the driver was loaded. This patch also involves SPIROM version fixes since it is used to determine whether the common init of the PHY was already executed, and the common init of this PHY is partially responsible for setting the Super-Isolate mode. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Change value comparison orderYaniv Rosner
Change comparison order such that the variable will come before the compared value. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Cosmetic changesYaniv Rosner
Fix spelling, alignment, empty lines, relocate the is_4_port_mode function, and split bnx2x_link_status_update function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Add known PHY type checkYaniv Rosner
The populate function will fail in case an unknown external PHY is detected. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Change Warpcore MDIO work around modeYaniv Rosner
This patch enables the usage of simpler MDC/MDIO work-around when accessing Warpcore registers. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Fix BCM84833 link and LED behaviorYaniv Rosner
This patch contain several fixes for the BCM84833. This PHY is still not in bnx2x production, hence this patch can be considered as enhancement. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Warpcore HW reset following fan failureYaniv Rosner
Put Warpcore in low power mode in case of fan failure to reduce heat. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: ETS changesYaniv Rosner
Fix a problem when new traffic class is created with 0% BW, the ETS is not conforming. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: PFC changesYaniv Rosner
Change BRB to work in per class guaranteed mode and handle cases for BW 0%. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:18:42 +0000