summaryrefslogtreecommitdiff
path: root/drivers/net/dsa
AgeCommit message (Collapse)Author
2017-10-23net: dsa: bcm_sf2: Use existing shift/masksFlorian Fainelli
Instead of open coding the shift for the IP protocol, IP fragment bit etc. define and/or use existing constants to that end. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: dsa: lan9303: Add fdb/mdb manipulationEgil Hjelmeland
Add functions for managing the lan9303 ALR (Address Logic Resolution). Implement DSA methods: port_fdb_add, port_fdb_del, port_mdb_prepare, port_mdb_add and port_mdb_del. Since the lan9303 do not offer reading specific ALR entry, the driver caches all static entries - in a flat table. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: dsa: lan9303: Add port_fast_age and port_fdb_dump methodsEgil Hjelmeland
Add DSA method port_fast_age as a step to STP support. Add low level functions for accessing the lan9303 ALR (Address Logic Resolution). Added DSA method port_fdb_dump Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: add dsa_to_port helperVivien Didelot
The dsa_port structure is part of DSA core data and must only be updated by the later. It is OK and sometimes necessary for the DSA drivers to access this data, but this has to be read only. For that purpose, add a dsa_to_port() helper which returns a const pointer to a dsa_port structure which must be used by DSA drivers from now on instead of digging into ds->ports[] themselves. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: split dsa_port's netdev memberVivien Didelot
The dsa_port structure has a "netdev" member, which can be used for either the master device, or the slave device, depending on its type. It is true that today, CPU port are not exposed to userspace, thus the port's netdev member can be used to point to its master interface. But it is still slightly confusing, so split it into more explicit "master" and "slave" members inside an anonymous union. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: mv88e6060: fix switch MAC addressVivien Didelot
The 88E6060 Ethernet switch always transmits the multicast bit of the switch MAC address as a zero. It re-uses the corresponding bit 8 of the register "Switch MAC Address Register Bytes 0 & 1" for "DiffAddr". If the "DiffAddr" bit is 0, then all ports transmit the same source address. If it is set to 1, then bit 2:0 are used for the port number. The mv88e6060 driver is currently wrongly shifting the MAC address byte 0 by 9. To fix this, shift it by 8 as usual and clear its bit 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: dsa_loop: remove .set_addrVivien Didelot
The .set_addr function does nothing, remove the dsa_loop implementation before getting rid of it completely in DSA. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: mv88e6060: setup random mac addressVivien Didelot
As for mv88e6xxx, setup the switch from within the mv88e6060 driver with a random MAC address, and remove the .set_addr implementation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: mv88e6060: fix switch MAC addressVivien Didelot
The 88E6060 Ethernet switch always transmits the multicast bit of the switch MAC address as a zero. It re-uses the corresponding bit 8 of the register "Switch MAC Address Register Bytes 0 & 1" for "DiffAddr". If the "DiffAddr" bit is 0, then all ports transmit the same source address. If it is set to 1, then bit 2:0 are used for the port number. The mv88e6060 driver is currently wrongly shifting the MAC address byte 0 by 9. To fix this, shift it by 8 as usual and clear its bit 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: mv88e6xxx: setup random mac addressVivien Didelot
An Ethernet switch may support having a MAC address, which can be used as the switch's source address in transmitted full-duplex Pause frames. If a DSA switch supports the related .set_addr operation, the DSA core sets the master's MAC address on the switch. This won't make sense anymore in a multi-CPU ports system, because there won't be a unique master device assigned to a switch tree. Instead, setup the switch from within the Marvell driver with a random MAC address, and remove the .set_addr implementation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net: dsa: bcm_sf2: Turn on ACB at the switch levelFlorian Fainelli
Turn on the out of band Advanced Congestion Buffering (ACB) mechanism at the switch level now that we have properly established the queue mapping between the switch egress queues and the SYSTEMPORT egress queues. This allows the switch to correctly backpressure the host system when one of its queue drops below the configured thresholds. This is also helping achieve so called "lossless" behavior by adapting the TX interrupt pacing to the actual speed and capacity of the switch port. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: dsa: lan9303: Add basic offloading of unicast trafficEgil Hjelmeland
When both user ports are joined to the same bridge, the normal HW MAC learning is enabled. This means that unicast traffic is forwarded in HW. If one of the user ports leave the bridge, the ports goes back to the initial separated operation. Port separation relies on disabled HW MAC learning. Hence the condition that both ports must join same bridge. Add brigde methods port_bridge_join, port_bridge_leave and port_stp_state_set. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: dsa: lan9303: Move tag setup to new lan9303_setup_taggingEgil Hjelmeland
Prepare for next patch: Move tag setup from lan9303_separate_ports() to new function lan9303_setup_tagging() Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03net: dsa: mt7530: make functions mt7530_phy_write staticColin Ian King
The function mt7530_phy_write is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warnings: symbol 'mt7530_phy_write' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03net: dsa: lan9303: make functions lan9303_mdio_phy_{read|write} staticColin Ian King
The functions lan9303_mdio_phy_write and lan9303_mdio_phy_read are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'lan9303_mdio_phy_write' was not declared. Should it be static? symbol 'lan9303_mdio_phy_read' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01Revert "net: dsa: bcm_sf2: Defer port enabling to calling port_enable"Florian Fainelli
This reverts commit e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") because this now makes an unbind followed by a bind to fail connecting to the ingrated PHY. What this patch missed is that we need the PHY to be enabled with bcm_sf2_gphy_enable_set() before probing it on the MDIO bus. This is correctly done in the ops->setup() function, but by the time ops->port_enable() runs, this is too late. Upon unbind we would power down the PHY, and so when we would bind again, the PHY would be left powered off. Fixes: e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: lock mutex when freeing IRQsVivien Didelot
mv88e6xxx_g2_irq_free locks the registers mutex, but not mv88e6xxx_g1_irq_free, which results in a stack trace from assert_reg_lock when unloading the mv88e6xxx module. Fix this. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlansAndrew Lunn
Ports with the same VLAN must all be in the same bridge. However the CPU and DSA ports need to be in multiple VLANs spread over multiple bridges. So exclude them when performing this test. Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: dsa: use dedicated CPU portVivien Didelot
Each port in DSA has its own dedicated CPU port currently available in its parent switch's ds->ports[port].cpu_dp. Use it instead of getting the unique tree CPU port, which will be deprecated soon. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: lan9303: Add adjust_link() methodEgil Hjelmeland
Make the driver react to device tree "fixed-link" declaration on CPU port. - turn off autonegotiation - force speed 10 or 100 mb/s - force duplex mode Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Utilize b53_{enable, disable}_portFlorian Fainelli
Export b53_{enable,disable}_port and use these two functions in bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions cannot be used without wrapping because we need to manage additional switch integration details (PHY, Broadcom tag etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFPFlorian Fainelli
The magic number 8 in 3 locations in bcm_sf2_cfp.c actually designates the number of switch port egress queues, so use that define instead of open-coding it. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Export b53_imp_vlan_setup()Florian Fainelli
bcm_sf2 and b53 do exactly the same thing, so share that piece. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Wire-up EEEFlorian Fainelli
Add support for enabling and disabling EEE, as well as re-negotiating it in .adjust_link() and in .port_enable(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Move EEE functions to b53Florian Fainelli
Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared code amongst Gigabit capable switch, only 5325 and 5365 are too old to support that. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Define EEE register pageFlorian Fainelli
In preparation for migrating the EEE code from bcm_sf2 to b53, define the full EEE register page and offsets within that page. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Move Broadcom header setup to b53Florian Fainelli
The code to enable Broadcom tags/headers is largely switch independent, and in preparation for enabling it for multiple devices with b53, move the code we have in bcm_sf2.c to b53_common.c Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Use a macro to define I/O operationsFlorian Fainelli
Instead of repeating the same pattern: acquire mutex, read/write, release mutex, define a macro: b53_build_op() which takes the type (read|write), I/O size, and value (scalar or pointer). This helps with fixing bugs that could exist (e.g: missing barrier, lock etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Defer port enabling to calling port_enableFlorian Fainelli
There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Defer port enabling to calling port_enableFlorian Fainelli
There is no need to configure the enabled ports once in b53_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Make b53_enable_cpu_port() take a port argumentFlorian Fainelli
In preparation for future changes allowing the configuring of multiple CPU ports, make b53_enable_cpu_port() take a port argument. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Remove is_cpu_port()Florian Fainelli
This is not used anywhere, so remove it. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-09-05net: dsa: bcm_sf2: Configure IMP port TC2QOS mappingFlorian Fainelli
Even though TC2QOS mapping is for switch egress queues, we need to configure it correclty in order for the Broadcom tag ingress (CPU -> switch) queue selection to work correctly since there is a 1:1 mapping between switch egress queues and ingress queues. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05net: dsa: bcm_sf2: Advertise number of egress queuesFlorian Fainelli
The switch supports 8 egress queues per port, so indicate that such that net/dsa/slave.c::dsa_slave_create can allocate the right number of TX queues. While at it use SF2_NUM_EGRESS_QUEUE as a define for the number of queues we support. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: dsa: loop: Do not unregister invalid fixed PHYFlorian Fainelli
During error injection it was possible to crash in dsa_loop_exit() because of an attempt to unregister an invalid PHY. We actually want to the driver probing in dsa_loop_init() even though fixed_phy_register() may return an error to exercise how DSA deals with such cases, but we should not be crashing during driver removal. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278Florian Fainelli
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set, fix that. Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29net: dsa: make some structures constBhumika Goyal
Make these const as they are not modified anywhere. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29net: dsa: bcm_sf2: Use correct I/O accessorsFlorian Fainelli
The Starfigther 2 driver currently uses __raw_{read,write}l which means native I/O endian. This works correctly for an ARM LE kernel (default) but fails miserably on an ARM BE (BE8) kernel where registers are kept little endian, so replace uses with {read,write}l_relaxed here which is what we want because this is all performance sensitive code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20net: dsa: mv88e6xxx: make irq_chip constBhumika Goyal
Make this const as it is only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net: dsa: make dsa_switch_ops constBhumika Goyal
Make these structures const as they are only stored in the ops field of a dsa_switch structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: lan9303: Only allocate 3 portsEgil Hjelmeland
Save 2628 bytes on arm eabi by allocate only the required 3 ports. Now that ds->num_ports is correct: In net/dsa/tag_lan9303.c eliminate duplicate LAN9303_MAX_PORTS, use ds->num_ports. (Matching the pattern of other net/dsa/tag_xxx.c files.) Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: mediatek: add adjust link support for user portsJohn Crispin
Manually adjust the port settings of user ports once PHY polling has completed. This patch extends the adjust_link callback to configure the per port PMCR register, applying the proper values polled from the PHY. Without this patch flow control was not always getting setup properly. Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by: Muciri Gatimu <muciri@openmesh.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for MDB dump from DSA's driversArkadi Sharshevsky
This is done as a preparation before removing support for MDB dump from DSA core. The MDBs are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for vlan dump from DSA's driversArkadi Sharshevsky
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove prepare phase for FDBArkadi Sharshevsky
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 03:03:21 +0000