summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/microchip/ksz_common.h
AgeCommit message (Collapse)Author
2020-09-10net: dsa: microchip: look for phy-mode in port nodesHelmut Grohne
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/ Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: dsa: microchip: call phy_remove_link_mode during probeHelmut Grohne
When doing "ip link set dev ... up" for a ksz9477 backed link, ksz9477_phy_setup is called and it calls phy_remove_link_mode to remove 1000baseT HDX. During phy_remove_link_mode, phy_advertise_supported is called. Doing so reverts any previous change to advertised link modes e.g. using a udevd .link file. phy_remove_link_mode is not meant to be used while opening a link and should be called during phy probe when the link is not yet available to userspace. Therefore move the phy_remove_link_mode calls into ksz9477_switch_register. It indirectly calls dsa_register_switch, which creates the relevant struct phy_devices and we update the link modes right after that. At that time dev->features is already initialized by ksz9477_switch_detect. Remove phy_setup from ksz_dev_ops as no users remain. Link: https://lore.kernel.org/netdev/20200715192722.GD1256692@lunn.ch/ Fixes: 42fc6a4c613019 ("net: dsa: microchip: prepare PHY for proper advertisement") Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04net: dsa: microchip: remove unused private membersCodrin Ciubotariu
Private structure members live_ports, on_ports, rx_ports, tx_ports are initialized but not used anywhere. Let's remove them. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04net: dsa: microchip: split adjust_link() in phylink_mac_link_{up|down}()Codrin Ciubotariu
The DSA subsystem moved to phylink and adjust_link() became deprecated in the process. This patch removes adjust_link from the KSZ DSA switches and adds phylink_mac_link_up() and phylink_mac_link_down(). Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: dsa: microchip: use delayed_work instead of timer + workGeorge McCollister
Simplify ksz_common.c by using delayed_work instead of a combination of timer and work. Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: dsa: microchip: Add shared regmap mutexMarek Vasut
The KSZ driver uses one regmap per register width (8/16/32), each with it's own lock, but accessing the same set of registers. In theory, it is possible to create a race condition between these regmaps, although the underlying bus (SPI or I2C) locking should assure nothing bad will really happen and the accesses would be correct. To make the driver do the right thing, add one single shared mutex for all the regmaps used by the driver instead. This assures that even if some future hardware is on a bus which does not serialize the accesses the same way SPI or I2C does, nothing bad will happen. Note that the status_mutex was unused and only initied, hence it was renamed and repurposed as the regmap mutex. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15net: dsa: microchip: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for Microchip KSZ series switch support. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: dsa: microchip: Always set regmap stride to 1Marek Vasut
The regmap stride is set to 1 for regmap describing 8bit registers already. However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This is not correct, as the switch protocol supports unaligned register reads and writes and the KSZ87xx even uses such unaligned register accesses to read e.g. MIB counter. This patch fixes MIB counter access on KSZ87xx. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Fixes: 46558d601cb6 ("net: dsa: microchip: Initial SPI regmap support") Fixes: 255b59ad0db2 ("net: dsa: microchip: Factor out regmap config generation into common header") Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12net: dsa: microchip: add KSZ9477 I2C driverTristram Ha
Add KSZ9477 I2C driver support. The code ksz9477.c and ksz_common.c are used together to generate the I2C driver. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> [george.mccollister@gmail.com: bring up to date, use ksz_common regmap macros] Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
r8152 conflicts are the NAPI fixes in 'net' overlapping with some tasklet stuff in net-next Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: dsa: microchip: fill regmap_config nameGeorge McCollister
Use the register value width as the regmap_config name to prevent the following error when the second and third regmap_configs are initialized. "debugfs: Directory '${bus-id}' with parent 'regmap' already present!" Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: dsa: ksz: Merge ksz_priv.h into ksz_common.hMarek Vasut
Merge the two headers into one, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: dsa: ksz: Remove dead code and fix warningsMarek Vasut
Remove ksz_port_cleanup(), which is unused. Add missing include "ksz_common.h", which fixes the following warning when built with make ... W=1 drivers/net/dsa/microchip/ksz_common.c:23:6: warning: no previous prototype for ‘...’ [-Wmissing-prototypes] Note that the order of the headers cannot be swapped, as that would trigger missing forward declaration errors, which would indicate the way forward is to merge the two headers into one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: dsa: ksz: Add Microchip KSZ8795 DSA driverTristram Ha
Add Microchip KSZ8795 DSA driver. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Replace ad-hoc polling with regmapMarek Vasut
Regmap provides polling function to poll for bits in a register, use in instead of reimplementing it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Factor out regmap config generation into common headerMarek Vasut
The regmap config tables are rather similar for various generations of the KSZ8xxx/KSZ9xxx switches. Introduce a macro which allows generating those tables without duplication. Note that $regalign parameter is not used right now, but will be used in KSZ87xx series switches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Dispose of ksz_io_opsMarek Vasut
Since the driver now uses regmap , get rid of ad-hoc ksz_io_ops abstraction, which no longer has any meaning. Moreover, since regmap has it's own locking, get rid of the register access mutex. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Move ksz_cfg and ksz_port_cfg to ksz9477.cMarek Vasut
These functions are only used by the KSZ9477 code, move them from the header into that code. Note that these functions will be soon replaced by regmap equivalents. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Remove ksz_{get,set}()Marek Vasut
These functions and callbacks are never used, remove them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Remove ksz_{read,write}24()Marek Vasut
These functions and callbacks are never used, remove them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24dsa: Remove phydev parameter from disable_port callAndrew Lunn
No current DSA driver makes use of the phydev parameter passed to the disable_port call. Remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net: dsa: microchip: add port_cleanup functionTristram Ha
Add port_cleanup function to reset some device variables when the port is disabled. Add a mutex to make sure changing those variables is thread-safe. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net: dsa: microchip: get port link statusTristram Ha
Get port link status to know whether to read MIB counters when the link is going down. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net: dsa: microchip: add MIB counter reading supportTristram Ha
Add background MIB counter reading support. Port MIB counters should only be read when there is link. Otherwise it is a waste of time as hardware never increases those counters. There are exceptions as some switches keep track of dropped counts no matter what. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: break KSZ9477 DSA driver into two filesTristram Ha
Break KSZ9477 DSA driver into two files in preparation to add more KSZ switch drivers. Add common functions in ksz_common.h so that other KSZ switch drivers can access code in ksz_common.c. Add ksz_spi.h for common functions used by KSZ switch SPI drivers. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 10:51:26 +0000