summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/b53/b53_common.c
AgeCommit message (Collapse)Author
2025-05-22net: dsa: b53: prevent standalone from trying to forward to other portsJonas Gorski
[ Upstream commit 4227ea91e2657f7965e34313448e9d0a2b67712e ] When bridged ports and standalone ports share a VLAN, e.g. via VLAN uppers, or untagged traffic with a vlan unaware bridge, the ASIC will still try to forward traffic to known FDB entries on standalone ports. But since the port VLAN masks prevent forwarding to bridged ports, this traffic will be dropped. This e.g. can be observed in the bridge_vlan_unaware ping tests, where this breaks pinging with learning on. Work around this by enabling the simplified EAP mode on switches supporting it for standalone ports, which causes the ASIC to redirect traffic of unknown source MAC addresses to the CPU port. Since standalone ports do not learn, there are no known source MAC addresses, so effectively this redirects all incoming traffic to the CPU port. Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: do not set learning and unicast/multicast on upJonas Gorski
[ Upstream commit 2e7179c628d3cb9aee75e412473813b099e11ed4 ] When a port gets set up, b53 disables learning and enables the port for flooding. This can undo any bridge configuration on the port. E.g. the following flow would disable learning on a port: $ ip link add br0 type bridge $ ip link set sw1p1 master br0 <- enables learning for sw1p1 $ ip link set br0 up $ ip link set sw1p1 up <- disables learning again Fix this by populating dsa_switch_ops::port_setup(), and set up initial config there. Fixes: f9b3827ee66c ("net: dsa: b53: Support setting learning on port") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-12-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: fix learning on VLAN unaware bridgesJonas Gorski
[ Upstream commit 9f34ad89bcf0e6df6f8b01f1bdab211493fc66d1 ] When VLAN filtering is off, we configure the switch to forward, but not learn on VLAN table misses. This effectively disables learning while not filtering. Fix this by switching to forward and learn. Setting the learning disable register will still control whether learning actually happens. Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-11-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: fix toggling vlan_filteringJonas Gorski
[ Upstream commit 2dc2bd57111582895e10f54ea380329c89873f1c ] To allow runtime switching between vlan aware and vlan non-aware mode, we need to properly keep track of any bridge VLAN configuration. Likewise, we need to know when we actually switch between both modes, to not have to rewrite the full VLAN table every time we update the VLANs. So keep track of the current vlan_filtering mode, and on changes, apply the appropriate VLAN configuration. Fixes: 0ee2af4ebbe3 ("net: dsa: set configure_vlan_while_not_filtering to true by default") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-10-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: do not program vlans when vlan filtering is offJonas Gorski
[ Upstream commit f089652b6b16452535dcc5cbaa6e2bb05acd3f93 ] Documentation/networking/switchdev.rst says: - with VLAN filtering turned off: the bridge is strictly VLAN unaware and its data path will process all Ethernet frames as if they are VLAN-untagged. The bridge VLAN database can still be modified, but the modifications should have no effect while VLAN filtering is turned off. This breaks if we immediately apply the VLAN configuration, so skip writing it when vlan_filtering is off. Fixes: 0ee2af4ebbe3 ("net: dsa: set configure_vlan_while_not_filtering to true by default") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-9-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: do not allow to configure VLAN 0Jonas Gorski
[ Upstream commit 45e9d59d39503bb3e6ab4d258caea4ba6496e2dc ] Since we cannot set forwarding destinations per VLAN, we should not have a VLAN 0 configured, as it would allow untagged traffic to work across ports on VLAN aware bridges regardless if a PVID untagged VLAN exists. So remove the VLAN 0 on join, an re-add it on leave. But only do so if we have a VLAN aware bridge, as without it, untagged traffic would become tagged with VID 0 on a VLAN unaware bridge. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-8-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: always rejoin default untagged VLAN on bridge leaveJonas Gorski
[ Upstream commit 13b152ae40495966501697693f048f47430c50fd ] While JOIN_ALL_VLAN allows to join all VLANs, we still need to keep the default VLAN enabled so that untagged traffic stays untagged. So rejoin the default VLAN even for switches with JOIN_ALL_VLAN support. Fixes: 48aea33a77ab ("net: dsa: b53: Add JOIN_ALL_VLAN support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-7-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: fix VLAN ID for untagged vlan on bridge leaveJonas Gorski
[ Upstream commit a1c1901c5cc881425cc45992ab6c5418174e9e5a ] The untagged default VLAN is added to the default vlan, which may be one, but we modify the VLAN 0 entry on bridge leave. Fix this to use the correct VLAN entry for the default pvid. Fixes: fea83353177a ("net: dsa: b53: Fix default VLAN ID") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-6-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: fix flushing old pvid VLAN on pvid changeJonas Gorski
[ Upstream commit 083c6b28c0cbcd83b6af1a10f2c82937129b3438 ] Presumably the intention here was to flush the VLAN of the old pvid, not the added VLAN again, which we already flushed before. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-5-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: fix clearing PVID of a portJonas Gorski
[ Upstream commit f480851981043d9bb6447ca9883ade9247b9a0ad ] Currently the PVID of ports are only set when adding/updating VLANs with PVID set or removing VLANs, but not when clearing the PVID flag of a VLAN. E.g. the following flow $ ip link add br0 type bridge vlan_filtering 1 $ ip link set sw1p1 master bridge $ bridge vlan add dev sw1p1 vid 10 pvid untagged $ bridge vlan add dev sw1p1 vid 10 untagged Would keep the PVID set as 10, despite the flag being cleared. Fix this by checking if we need to unset the PVID on vlan updates. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-4-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: keep CPU port always tagged againJonas Gorski
[ Upstream commit 425f11d4cc9bd9e97e6825d9abb2c51a068ca7b5 ] The Broadcom management header does not carry the original VLAN tag state information, just the ingress port, so for untagged frames we do not know from which VLAN they originated. Therefore keep the CPU port always tagged except for VLAN 0. Fixes the following setup: $ ip link add br0 type bridge vlan_filtering 1 $ ip link set sw1p1 master br0 $ bridge vlan add dev br0 pvid untagged self $ ip link add sw1p2.10 link sw1p2 type vlan id 10 Where VID 10 would stay untagged on the CPU port. Fixes: 2c32a3d3c233 ("net: dsa: b53: Do not force CPU to be always tagged") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-3-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: dsa: b53: allow leaky reserved multicastJonas Gorski
[ Upstream commit 5f93185a757ff38b36f849c659aeef368db15a68 ] Allow reserved multicast to ignore VLAN membership so STP and other management protocols work without a PVID VLAN configured when using a vlan aware bridge. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250429201710.330937-2-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25net: b53: enable BPDU reception for management portJonas Gorski
[ Upstream commit 36355ddfe8955f226a88a543ed354b9f6b84cd70 ] For STP to work, receiving BPDUs is essential, but the appropriate bit was never set. Without GC_RX_BPDU_EN, the switch chip will filter all BPDUs, even if an appropriate PVID VLAN was setup. Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://patch.msgid.link/20250414200434.194422-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-08net: dsa: b53: fix jumbo frames on 10/100 portsJonas Gorski
All modern chips support and need the 10_100 bit set for supporting jumbo frames on 10/100 ports, so instead of enabling it only for 583XX enable it for everything except bcm63xx, where the bit is writeable, but does nothing. Tested on BCM53115, where jumbo frames were dropped at 10/100 speeds without the bit set. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-08net: dsa: b53: allow lower MTUs on BCM5325/5365Jonas Gorski
While BCM5325/5365 do not support jumbo frames, they do support slightly oversized frames, so do not error out if requesting a supported MTU for them. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-08net: dsa: b53: fix max MTU for BCM5325/BCM5365Jonas Gorski
BCM5325/BCM5365 do not support jumbo frames, so we should not report a jumbo frame mtu for them. But they do support so called "oversized" frames up to 1536 bytes long by default, so report an appropriate MTU. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-08net: dsa: b53: fix max MTU for 1g switchesJonas Gorski
JMS_MAX_SIZE is the ethernet frame length, not the MTU, which is payload without ethernet headers. According to the datasheets maximum supported frame length for most gigabyte swithes is 9720 bytes, so convert that to the expected MTU when using VLAN tagged frames. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-08net: dsa: b53: fix jumbo frame mtu checkJonas Gorski
JMS_MIN_SIZE is the full ethernet frame length, while mtu is just the data payload size. Comparing these two meant that mtus between 1500 and 1518 did not trigger enabling jumbo frames. So instead compare the set mtu ETH_DATA_LEN, which is equal to JMS_MIN_SIZE - ETH_HLEN - ETH_FCS_LEN; Also do a check that the requested mtu is actually greater than the minimum length, else we do not need to enable jumbo frames. In practice this only introduced a very small range of mtus that did not work properly. Newer chips allow 2000 byte large frames by default, and older chips allow 1536 bytes long, which is equivalent to an mtu of 1514. So effectivly only mtus of 1515~1517 were broken. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-18net: dsa: b53: Limit chip-wide jumbo frame config to CPU portsMartin Willi
Broadcom switches supported by the b53 driver use a chip-wide jumbo frame configuration. In the commit referenced with the Fixes tag, the setting is applied just for the last port changing its MTU. While configuring CPU ports accounts for tagger overhead, user ports do not. When setting the MTU for a user port, the chip-wide setting is reduced to not include the tagger overhead, resulting in an potentially insufficient chip-wide maximum frame size for the CPU port. As, by design, the CPU port MTU is adjusted for any user port change, apply the chip-wide setting only for CPU ports. This aligns the driver to the behavior of other switch drivers. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Martin Willi <martin@strongswan.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-25net: dsa: b53: provide own phylink MAC operationsFlorian Fainelli
Convert b53 to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-9-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: dsa: b53: Remove b53_adjust_link()Florian Fainelli
Only use the PHYLINK implementation from there on now that an equivalent configuration is applied to all of the switch ports. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-8-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: dsa: b53: Call b53_eee_init() from b53_mac_link_up()Florian Fainelli
And make sure this is done for the MLO_AN_PHY case, where it actually makes sense, contrary to b53_adjust_link() which only did it for fixed-PHY configurations where it does not make sense. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-7-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: dsa: b53: Configure RGMII for 531x5 and MII for 5325Florian Fainelli
Call b53_adjust_531x5_rgmii() and b53_adjust_5325_mii() from b53_phylink_mac_config() when we have a fixed PHY in preparation for removing b53_adjust_link(). Also move b53_adjust_63xx_rgmii() to b53_phylink_mac_config() where it logically belongs. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-6-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: dsa: b53: Force flow control for BCM5301X CPU port(s)Florian Fainelli
Just like what b53_adjust_link() does, force flow control for the BCM5301X CPU port(s) by forcing rx_pause and tx_pause in b53_phylink_mac_link_up(). Preparatory step for getting rid of b53_adjust_link(). Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-5-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: dsa: b53: Introduce b53_adjust_5325_mii()Florian Fainelli
Takes care of doing the 5325 switch series specific MII programming and is called from b53_adjust_link() to allow the future removal of b53_adjust_link(). Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-4-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: dsa: b53: Introduce b53_adjust_531x5_rgmii()Florian Fainelli
Takes care of doing the 531x5 switch series specific RGMII programming and is called from b53_adjust_link() to allow the future removal of b53_adjust_link(). Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-3-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: dsa: b53: Stop exporting b53_phylink_* routinesFlorian Fainelli
They are not used outside of the b53_common.c file, no need to be exported. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net: dsa: b53: unexport and move b53_eee_enable_set()Vladimir Oltean
After commit f86ad77faf24 ("net: dsa: bcm_sf2: Utilize b53_{enable, disable}_port"), bcm_sf2.c no longer calls b53_eee_enable_set(), and all its callers are in b53_common.c. We also need to move it, because it is called within b53_common.c before its definition, and we want to avoid forward declarations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240206112527.4132299-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: dsa: b53: remove eee_enabled/eee_active in b53_get_mac_eee()Russell King (Oracle)
b53_get_mac_eee() sets both eee_enabled and eee_active, and then returns zero. dsa_slave_get_eee(), which calls this function, will then continue to call phylink_ethtool_get_eee(), which will return -EOPNOTSUPP if there is no PHY present, otherwise calling phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Thus, when there is no PHY, dsa_slave_get_eee() will fail with -EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to userspace. When there is a PHY, eee_enabled and eee_active will be overwritten by phylib, making the setting of these members in b53_get_mac_eee() entirely unnecessary. Remove this code, thus simplifying b53_get_mac_eee(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/E1rWbNI-002cCz-4x@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24net: dsa: Use conduit and user termsFlorian Fainelli
Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18net: dsa: remove legacy_pre_march2020 from driversRussell King (Oracle)
Since DSA no longer marks anything as phylink-legacy, there is now no need for DSA drivers to set this member to false. Remove all instances of this. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-27net: dsa: b53: mdio: add support for BCM53134Paul Geurts
Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver. BCM53134 is very similar to the BCM58XX series. Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-22net: dsa: b53: add BCM63268 RGMII configurationÁlvaro Fernández Rojas
BCM63268 requires special RGMII configuration to work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: dsa: b53: mmap: allow passing a chip IDÁlvaro Fernández Rojas
BCM6318 and BCM63268 SoCs require a special handling for their RGMIIs, so we should be able to identify them as a special BCM63xx switch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-21net: dsa: b53: add support for BCM63xx RGMIIsÁlvaro Fernández Rojas
BCM63xx RGMII ports require additional configuration in order to work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230319220805.124024-1-noltari@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-04Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - bitmap: optimize bitmap_weight() usage, from me - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro Carvalho Chehab - include/linux/find: Fix documentation, from Anna-Maria Behnsen - bitmap: fix conversion from/to fix-sized arrays, from me - bitmap: Fix return values to be unsigned, from Kees Cook It has been in linux-next for at least a week with no problems. * tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits) nodemask: Fix return values to be unsigned bitmap: Fix return values to be unsigned KVM: x86: hyper-v: replace bitmap_weight() with hweight64() KVM: x86: hyper-v: fix type of valid_bank_mask ia64: cleanup remove_siblinginfo() drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate lib/bitmap: add test for bitmap_{from,to}_arr64 lib: add bitmap_{from,to}_arr64 lib/bitmap: extend comment for bitmap_(from,to)_arr32() include/linux/find: Fix documentation lib/bitmap.c make bitmap_print_bitmask_to_buf parseable MAINTAINERS: add cpumask and nodemask files to BITMAP_API arch/x86: replace nodes_weight with nodes_empty where appropriate mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate clocksource: replace cpumask_weight with cpumask_empty in clocksource.c genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate irq: mips: replace cpumask_weight with cpumask_empty where appropriate drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate arch/x86: replace cpumask_weight with cpumask_empty where appropriate ...
2022-05-02net: dsa: don't use bitmap_weight() in b53_arl_read()Yury Norov
Don't call bitmap_weight() if the following code can get by without it. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-05-01net: dsa: b53: convert to phylink_pcsRussell King (Oracle)
Convert B53 to use phylink_pcs for the serdes rather than hooking it into the MAC-layer callbacks. Fixes: 81c1681cbb9f ("net: dsa: b53: mark as non-legacy") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17net: dsa: pass extack to dsa_switch_ops :: port_mirror_add()Vladimir Oltean
Drivers might have error messages to propagate to user space, most common being that they support a single mirror port. Propagate the netlink extack so that they can inform user space in a verbal way of their limitations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-27net: dsa: pass extack to .port_bridge_join driver methodsVladimir Oltean
As FDB isolation cannot be enforced between VLAN-aware bridges in lack of hardware assistance like extra FID bits, it seems plausible that many DSA switches cannot do it. Therefore, they need to reject configurations with multiple VLAN-aware bridges from the two code paths that can transition towards that state: - joining a VLAN-aware bridge - toggling VLAN awareness on an existing bridge The .port_vlan_filtering method already propagates the netlink extack to the driver, let's propagate it from .port_bridge_join too, to make sure that the driver can use the same function for both. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-27net: dsa: request drivers to perform FDB isolationVladimir Oltean
For DSA, to encourage drivers to perform FDB isolation simply means to track which bridge does each FDB and MDB entry belong to. It then becomes the driver responsibility to use something that makes the FDB entry from one bridge not match the FDB lookup of ports from other bridges. The top-level functions where the bridge is determined are: - dsa_port_fdb_{add,del} - dsa_port_host_fdb_{add,del} - dsa_port_mdb_{add,del} - dsa_port_host_mdb_{add,del} aka the pre-crosschip-notifier functions. Changing the API to pass a reference to a bridge is not superfluous, and looking at the passed bridge argument is not the same as having the driver look at dsa_to_port(ds, port)->bridge from the ->port_fdb_add() method. DSA installs FDB and MDB entries on shared (CPU and DSA) ports as well, and those do not have any dp->bridge information to retrieve, because they are not in any bridge - they are merely the pipes that serve the user ports that are in one or multiple bridges. The struct dsa_bridge associated with each FDB/MDB entry is encapsulated in a larger "struct dsa_db" database. Although only databases associated to bridges are notified for now, this API will be the starting point for implementing IFF_UNICAST_FLT in DSA. There, the idea is to install FDB entries on the CPU port which belong to the corresponding user port's port database. These are supposed to match only when the port is standalone. It is better to introduce the API in its expected final form than to introduce it for bridges first, then to have to change drivers which may have made one or more assumptions. Drivers can use the provided bridge.num, but they can also use a different numbering scheme that is more convenient. DSA must perform refcounting on the CPU and DSA ports by also taking into account the bridge number. So if two bridges request the same local address, DSA must notify the driver twice, once for each bridge. In fact, if the driver supports FDB isolation, DSA must perform refcounting per bridge, but if the driver doesn't, DSA must refcount host addresses across all bridges, otherwise it would be telling the driver to delete an FDB entry for a bridge and the driver would delete it for all bridges. So introduce a bool fdb_isolation in drivers which would make all bridge databases passed to the cross-chip notifier have the same number (0). This makes dsa_mac_addr_find() -> dsa_db_equal() say that all bridge databases are the same database - which is essentially the legacy behavior. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: mark as non-legacyRussell King (Oracle)
The B53 driver does not make use of the speed, duplex, pause or advertisement in its phylink_mac_config() implementation, so it can be marked as a non-legacy driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: switch to using phylink_generic_validate()Russell King (Oracle)
Switch the Broadcom b53 driver to using the phylink_generic_validate() implementation by removing its own .phylink_validate method and associated code. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: drop use of phylink_helper_basex_speed()Russell King (Oracle)
Now that we have a better method to select SFP interface modes, we no longer need to use phylink_helper_basex_speed() in a driver's validation function. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: populate supported_interfaces and mac_capabilitiesRussell King (Oracle)
Populate the supported interfaces and MAC capabilities for the Broadcom B53 DSA switches in preparation to using these for the generic validation functionality. The interface modes are derived from: - b53_serdes_phylink_validate() - SRAB mux configuration Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: clean up if() condition to be more readableRussell King (Oracle)
I've stared at this if() statement for a while trying to work out if it really does correspond with the comment above, and it does seem to. However, let's make it more readable and phrase it in the same way as the comment. Also add a FIXME into the comment - we appear to deny Gigabit modes for 802.3z interface modes, but 802.3z interface modes only operate at gigabit and above. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24net: use bool values to pass bool param of phy_init_eee()Jisheng Zhang
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_joinVladimir Oltean
This is a preparation patch for the removal of the DSA switch methods ->port_bridge_tx_fwd_offload() and ->port_bridge_tx_fwd_unoffload(). The plan is for the switch to report whether it offloads TX forwarding directly as a response to the ->port_bridge_join() method. This change deals with the noisy portion of converting all existing function prototypes to take this new boolean pointer argument. The bool is placed in the cross-chip notifier structure for bridge join, and a reference to it is provided to drivers. In the next change, DSA will then actually look at this value instead of calling ->port_bridge_tx_fwd_offload(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 22:14:59 +0000