summaryrefslogtreecommitdiff
path: root/drivers/net/can
AgeCommit message (Collapse)Author
2020-10-06can: c_can: reg_map_{c,d}_can: mark as __maybe_unusedMarc Kleine-Budde
This patch marks the arrays reg_map_c_can and reg_map_d_can as __maybe_unused, as they are indeed unused in the c_can driver. This warning shows up, when compiling the kernel with "W=1": drivers/net/can/c_can/c_can.c:45: drivers/net/can/c_can/c_can.h:124:18: warning: ‘reg_map_d_can’ defined but not used [-Wunused-const-variable=] drivers/net/can/c_can/c_can.h:84:18: warning: ‘reg_map_c_can’ defined but not used [-Wunused-const-variable=] Link: http://lore.kernel.org/r/20201006203748.1750156-4-mkl@pengutronix.de Fixes: 33f810097769 ("can: c_can: Move overlay structure to array with offset as index") Fixes: 69927fccd96b ("can: c_can: Add support for Bosch D_CAN controller") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-06can: softing: softing_card_shutdown(): add braces around empty body in an ↵Marc Kleine-Budde
'if' statement This patch fixes the following warning when building the kernel with "W=1": warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Link: http://lore.kernel.org/r/20201006203748.1750156-3-mkl@pengutronix.de Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: flexcan: disable runtime PM if register flexcandev failedJoakim Zhang
Disable runtime PM if register flexcandev failed, and balance reference of usage_count. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929211557.14153-4-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: flexcan: add flexcan driver for i.MX8MPJoakim Zhang
Add flexcan driver for i.MX8MP, which supports CAN FD and ECC. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929211557.14153-3-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: flexcan: initialize all flexcan memory for ECC functionJoakim Zhang
One issue was reported at a baremetal environment, which is used for FPGA verification. "The first transfer will fail for extended ID format(for both 2.0B and FD format), following frames can be transmitted and received successfully for extended format, and standard format don't have this issue. This issue occurred randomly with high possiblity, when it occurs, the transmitter will detect a BIT1 error, the receiver a CRC error. According to the spec, a non-correctable error may cause this transfer failure." With FLEXCAN_QUIRK_DISABLE_MECR quirk, it supports correctable errors, disable non-correctable errors interrupt and freeze mode. Platform has ECC hardware support, but select this quirk, this issue may not come to light. Initialize all FlexCAN memory before accessing them, at least it can avoid non-correctable errors detected due to memory uninitialized. The internal region can't be initialized when the hardware doesn't support ECC. According to IMX8MPRM, Rev.C, 04/2020. There is a NOTE at the section 11.8.3.13 Detection and correction of memory errors: "All FlexCAN memory must be initialized before starting its operation in order to have the parity bits in memory properly updated. CTRL2[WRMFRZ] grants write access to all memory positions that require initialization, ranging from 0x080 to 0xADF and from 0xF28 to 0xFFF when the CAN FD feature is enabled. The RXMGMASK, RX14MASK, RX15MASK, and RXFGMASK registers need to be initialized as well. MCR[RFEN] must not be set during memory initialization." Memory range from 0x080 to 0xADF, there are reserved memory (unimplemented by hardware, e.g. only configure 64 MBs), these memory can be initialized or not. In this patch, initialize all flexcan memory which includes reserved memory. In this patch, create FLEXCAN_QUIRK_SUPPORT_ECC for platforms which has ECC feature. If you have a ECC platform in your hand, please select this qurik to initialize all flexcan memory firstly, then you can select FLEXCAN_QUIRK_DISABLE_MECR to only enable correctable errors. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929211557.14153-2-qiangqing.zhang@nxp.com [mkl: wrap long lines] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp251xfd: rename all remaining occurrence to mcp251xfdMarc Kleine-Budde
In [1] Geert noted that the autodetect compatible for the mcp25xxfd driver, which is "microchip,mcp25xxfd" might be too generic and overlap with upcoming, but incompatible chips. In the previous patch the autodetect DT compatbile has been renamed to "microchip,mcp251xfd", this patch changes all non user facing occurrence of "mcp25xxfd" to "mcp251xfd" and "MCP25XXFD" to "MCP251XFD". [1] http://lore.kernel.org/r/CAMuHMdVkwGjr6dJuMyhQNqFoJqbh6Ec5V2b5LenCshwpM2SDsQ@mail.gmail.com Link: https://lore.kernel.org/r/20200930091424.792165-10-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp251xfd: rename all user facing strings to mcp251xfdMarc Kleine-Budde
In [1] Geert noted that the autodetect compatible for the mcp25xxfd driver, which is "microchip,mcp25xxfd" might be too generic and overlap with upcoming, but incompatible chips. In the previous patch the autodetect DT compatbile has been renamed to "microchip,mcp251xfd", this patch changes all user facing strings from "mcp25xxfd" to "mcp251xfd" and "MCP25XXFD" to "MCP251XFD", including: - kconfig symbols - name of kernel module - DT and SPI compatible [1] http://lore.kernel.org/r/CAMuHMdVkwGjr6dJuMyhQNqFoJqbh6Ec5V2b5LenCshwpM2SDsQ@mail.gmail.com Link: https://lore.kernel.org/r/20200930091424.792165-9-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp251xfd: rename driver files and subdir to mcp251xfdMarc Kleine-Budde
In [1] Geert noted that the autodetect compatible for the mcp25xxfd driver, which is "microchip,mcp25xxfd" might be too generic and overlap with upcoming, but incompatible chips. In the previous patch the autodetect DT compatbile has been renamed to "microchip,mcp251xfd", this patch changes the name of the driver subdir and the individual files accordinly. [1] http://lore.kernel.org/r/CAMuHMdVkwGjr6dJuMyhQNqFoJqbh6Ec5V2b5LenCshwpM2SDsQ@mail.gmail.com Link: https://lore.kernel.org/r/20200930091424.792165-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp25xxfd: narrow down wildcards in device tree bindings to ↵Thomas Kopp
"microchip,mcp251xfd" The wildcard should be narrowed down to prevent existing and future devices that are not compatible from matching. It is very unlikely that incompatible devices will be released that do not match the wildcard. Discussion Reference: https://lore.kernel.org/r/CAMuHMdVkwGjr6dJuMyhQNqFoJqbh6Ec5V2b5LenCshwpM2SDsQ@mail.gmail.com Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> Link: https://lore.kernel.org/r/20200930091423.755-1-thomas.kopp@microchip.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp25xxfd: mcp25xxfd_irq(): add missing initialization of variable ↵Marc Kleine-Budde
set_normal mode This patch fixes the following warning: drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c:2155 mcp25xxfd_irq() error: uninitialized symbol 'set_normal_mode'. by adding the missing initialization. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Link: https://lore.kernel.org/r/20200923114726.2704426-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp25xxfd: mcp25xxfd_ring_free(): fix memory leak during cleanupDan Carpenter
This loop doesn't free the first element of the array. The "i > 0" has to be changed to "i >= 0". Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200923112752.GA1473821@mwanda Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata informationThomas Kopp
This patch adds a reference to the recent released MCP2517FD and MCP2518FD errata sheets and paste the explanation. The driver already implements the proposed fix. Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> Link: https://lore.kernel.org/r/20200925065606.358-1-thomas.kopp@microchip.com [mkl: split into two patches, adjust subject and commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-30can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and update ↵Thomas Kopp
log messages This patch adds a reference to the recent released MCP2517FD and MCP2518FD errata sheets and paste the explanation. The single error correction does not always work, so always indicate that a single error occurred. If the location of the ECC error is outside of the TX-RAM always use netdev_notice() to log the problem. For ECC errors in the TX-RAM, there is a recovery procedure. Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> Link: https://lore.kernel.org/r/20200925065606.358-1-thomas.kopp@microchip.com [mkl: split into two patches, adjust subject and commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add lx2160ar1 supportJoakim Zhang
The Flexcan on lx2160ar1 supports CAN FD protocol. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-9-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add imx8qm supportJoakim Zhang
The Flexcan on i.MX8QM supports CAN FD protocol. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-8-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add Transceiver Delay Compensation supportJoakim Zhang
The CAN-FD protocol allows the transmission and reception of data at a higher bit rate than the nominal rate used in the arbitration phase when the message's BRS bit is set. The TDC mechanism is effective only during the data phase of FD frames having BRS bit set. It has no effect either on non-FD frames, or on FD frames transmitted at normal bit rate. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-7-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add CAN FD BRS supportJoakim Zhang
This patch adds CAN FD BitRate Switch (BRS) support to driver. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-5-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add ISO CAN FD feature supportJoakim Zhang
ISO CAN FD is introduced to increase the failture detection capability than non-ISO CAN FD. The non-ISO CAN FD is still supported by FlexCAN so that it can be used mainly during an intermediate phase, for evaluation and development purposes. Therefore, it is strongly recommended to configure FlexCAN to the ISO CAN FD protocol by setting the ISOCANFDEN field in the CTRL2 register. NOTE: If you only set "fd on", driver will use ISO FD mode by default. You should set "fd-non-iso on" after setting "fd on" if you want to use NON ISO FD mode. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-6-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add CAN-FD mode supportJoakim Zhang
This patch adds CAN-FD mode support to the driver, it means that payload size can extend up to 64 bytes. Bit timing always set in the CBT register, not in the CTRL1 register any more. This has an extend range of all CAN bit timing variables (PRESDIV, PROPSEG, PSEG1, PSEG2 and RJW), which will improve the bit timing accuracy. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [mkl: move cbt-based bitrate support into separate function] Link: https://lore.kernel.org/r/20200922144429.2613631-16-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: use struct canfd_frame for CAN classic frameJoakim Zhang
This patch prepares for CAN FD mode, using struct canfd_frame can both for classic format frame and fd format frame. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-3-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: flexcan_set_bittiming(): move setup of CAN-2.0 bitiming into ↵Marc Kleine-Budde
separate function This is a patch prepares for the CAN-FD support. In a later patch the setup for canfd bittiming will be added, with this patch the change is easier to read. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-14-mkl@pengutronix.de
2020-09-22can: flexcan: add LPSR mode supportJoakim Zhang
On the i.MX7D in LPSR mode, the controller will be powered off and the configuration state is lost after system resume. Upcoming i.MX8QM/QXP will also completely power off the domain, the controller state is lost and needs restore, too. So we need to set the pinctrl state again and re-start chip to re-configuration after resume. For the wakeup case, it should not set pinctrl to sleep state by pinctrl_pm_select_sleep_state. If the interface is down before suspend, we don't need to re-configure it as it will be configured if the interface is brought up later. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20191204113249.3381-7-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: disable clocks during stop modeJoakim Zhang
Disable clocks while CAN core is in stop mode. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20191210085721.9853-2-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: flexcan_chip_stop(): add error handling and propagate error valueJoakim Zhang
This patch implements error handling and propagates the error value of flexcan_chip_stop(). This function will be called from flexcan_suspend() in an upcoming patch in some SoCs which support LPSR mode. Add a new function flexcan_chip_stop_disable_on_error() that tries to disable the chip even in case of errors. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-11-mkl@pengutronix.de
2020-09-22can: flexcan: add correctable errors correction when HW supports ECCJoakim Zhang
commit cdce844865be ("can: flexcan: add vf610 support for FlexCAN") From above commit by Stefan Agner, the patch just disables non-correctable errors interrupt and freeze mode. It still can correct the correctable errors since ECC enabled by default after reset (MECR[ECCDIS]=0, enable memory error correct) if HW supports ECC. commit 5e269324db5a ("can: flexcan: disable completely the ECC mechanism") From above commit by Joakim Zhang, the patch disables ECC completely (assert MECR[ECCDIS]) according to the explanation of FLEXCAN_QUIRK_DISABLE_MECR that disable memory error detection. This cause correctable errors cannot be corrected even HW supports ECC. The error correction mechanism ensures that in this 13-bit word, errors in one bit can be corrected (correctable errors) and errors in two bits can be detected but not corrected (non-correctable errors). Errors in more than two bits may not be detected. If HW supports ECC, we can use this to correct the correctable errors detected from FlexCAN memory. Then disable non-correctable errors interrupt and freeze mode to avoid that put FlexCAN in freeze mode. This patch adds correctable errors correction when HW supports ECC, and modify explanation for FLEXCAN_QUIRK_DISABLE_MECR. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200416093126.15242-1-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: Add check for transceiver maximum bitrate limitationJoakim Zhang
CAN FD can transmit up to 8Mbps, but some transceivers only can support 5Mbps, so add check in driver. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20191030064245.12923-2-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: flexcan_probe(): make regulator xceiver optionalMarc Kleine-Budde
As the transcevier regulator is optional, this patch switches from devm_regulator_get() to devm_regulator_get_optional(). This gets rid of "using dummy regulator" warning message from the regulator core, if no regulator is available. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-8-mkl@pengutronix.de
2020-09-22can: flexcan: Ack wakeup interrupt separatelyJoakim Zhang
As FLEXCAN_ESR_ALL_INT is for all bus errors and state change IRQ sources, strictly speaking FLEXCAN_ESR_WAK_INT does not belong to these. So add wakeup interrupt ack separately to existing ack of the interrupts. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20191204113249.3381-3-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: quirks: get rid of long linesMarc Kleine-Budde
This patch reformats the quirks to get rid of long lines. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-6-mkl@pengutronix.de
2020-09-22can: flexcan: struct flexcan_regs: document registers not affected by soft resetMarc Kleine-Budde
This patch documents which registers are not affected by a soft reset of the flexcan IP core. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-5-mkl@pengutronix.de
2020-09-22can: flexcan: more register namesMarc Kleine-Budde
This patch adds some new register names and tries to ensure with a static_assert that the documented offset is correct. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-4-mkl@pengutronix.de
2020-09-22can: flexcan: flexcan_exit_stop_mode(): remove stray empty lineMarc Kleine-Budde
This patch removes a stray empty line from the flexcan_exit_stop_mode() function. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-3-mkl@pengutronix.de
2020-09-22can: flexcan: sort include files alphabeticallyMarc Kleine-Budde
This patch sorts the include files alphabetically. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-2-mkl@pengutronix.de
2020-09-21can: mcp25xxfd: add listen-only modeKurt Van Dijck
This commit enables listen-only mode, which works internally like CANFD mode. Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200918172536.2074504-5-mkl@pengutronix.de
2020-09-21can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CANMarc Kleine-Budde
This patch adds support for the Microchip MCP25xxFD SPI CAN controller family. Tested-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200918172536.2074504-4-mkl@pengutronix.de
2020-09-21can: mcp25xxfd: add regmap infrastructureMarc Kleine-Budde
This patch adds the regmap infrastructure for the Microchip MCP25xxFD SPI CAN controller family. The actual driver is added in the next commit. Tested-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200918172536.2074504-3-mkl@pengutronix.de
2020-09-21can: rx-offload: can_rx_offload_add_manual(): add new initialization functionMarc Kleine-Budde
This patch adds a new initialization function: can_rx_offload_add_manual() It should be used to add support rx-offload to a driver, if the callback mechanism should not be used. Use e.g. can_rx_offload_queue_sorted() to queue skbs into rx-offload. Link: https://lore.kernel.org/r/20200915223527.1417033-33-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mscan: simplify clock enable/disableZhang Changzhong
All the NULL checks are pointless, clk_*() routines already deal with NULL just fine. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1594972875-27631-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mscan: mpc5xxx_can: update contact emailWolfram Sang
The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200502142657.19199-1-wsa@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: add support for half duplex controllersTim Harvey
Some SPI host controllers do not support full-duplex SPI and are marked as such via the SPI_CONTROLLER_HALF_DUPLEX controller flag. For such controllers use half duplex transactions but retain full duplex transactions for the controllers that can handle those. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/1595516275-1179-1-git-send-email-tharvey@gateworks.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: Use readx_poll_timeout() helperAndy Shevchenko
We may use special helper macro to poll IO till condition or timeout occurs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200217161038.25009-1-andriy.shevchenko@linux.intel.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: add GPIO supportTimo Schlüßler
The mcp251x variants feature 3 general purpose digital inputs and 2 outputs. With this patch they are accessible through the gpio framework. Signed-off-by: Timo Schlüßler <schluessler@krause.de> Tested-by: Timo Schlüßler <schluessler@krause.de> Link: https://lore.kernel.org/r/20200915223527.1417033-28-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: sort include files alphabeticallyMarc Kleine-Budde
This patch sorts the include files alphabetically. Link: https://lore.kernel.org/r/20200915223527.1417033-27-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: spi: Kconfig: remove unneeded dependencies form Kconfig symbolsMarc Kleine-Budde
Since commits 653ee35ce6d5 ("can: hi311x: remove custom DMA mapped buffer") Fixes: df58525df395 ("can: mcp251x: remove custom DMA mapped buffer") both the hi3111x and the mcp251x driver don't make use of the DMA API any more. So we can safely remove the HAS_DMA dependency. While we're here, remove the unneeded CAN_DEV and SPI dependencies from the CAN_HI311X symbol, as the parent menus already have these dependencies. Link: https://lore.kernel.org/r/20200915223527.1417033-24-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pcan_usb: add support of rxerr/txerr countersStephane Grosjean
This patch adds the support of the rx/tx errors CAN counters to the driver of the PCAN-USB PC-CAN interface from PEAK-System GmbH. The PCAN-USB is capable of giving back the values of the rx/tx errors counters, to provide more details and statistics to the linux-can layer. Getting these values allows the driver to better tune CAN_ERR_CRTL_TX_xxx and CAN_ERR_CRTL_RX_xxx bits in case of the interface enters any CAN_STATE_ERROR_xxx state. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20191206153803.17725-3-s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pcan_usb: Document the commands sent to the deviceStephane Grosjean
This patch documents the functions and numbers of the commands sent by the driver to the PCAN-USB CAN device from PEAK-System GmbH. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20191206153803.17725-2-s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pch_can: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200728085757.888620-1-vaibhavgupta40@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: peak_canfd: Remove unused macrosWang Hai
CANFD_CLK_SEL_DIV_MASK and CANFD_OPTIONS_SET are never used after they were introduced. Remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20200904131247.23021-1-wanghai38@huawei.com [mkl: keep CANFD_CLK_SEL_DIV_MASK for documentation purpose] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: peak_usb: convert to use le32_add_cpu()Liu Shixin
Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu(). Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200914041744.3701840-1-liushixin2@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: ti_hecc: convert to devm_platform_ioremap_resource_byname()Dejin Zheng
Use the function devm_platform_ioremap_resource_byname() to simplify source code which calls the functions platform_get_resource_byname() and devm_ioremap_resource(). Remove also a few error messages which became unnecessary with this software refactoring. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200420132207.8536-1-zhengdejin5@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:17:18 +0000