summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2019-02-25mmc: sdhci-xenon: Fixup already marked switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases according to what the compiler looks for, where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-tegra: drop ->get_ro() implementationThomas Petazzoni
The SDHCI core is know properly checking for the state of a WP GPIO, so there is no longer any need for the sdhci-tegra code to implement ->get_ro() using mmc_gpio_get_ro(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-omap: drop ->get_ro() implementationThomas Petazzoni
The SDHCI core is now properly checking for the state of a WP GPIO, so there is no longer any need for the sdhci-omap code to implement ->get_ro() using mmc_gpio_get_ro(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: use WP GPIO in sdhci_check_ro()Thomas Petazzoni
Even though SDHCI controllers may have a dedicated WP pin that can be queried using the SDHCI_PRESENT_STATE register, some platforms may chose to use a separate regular GPIO to route the WP signal. Such a GPIO is typically represented using the wp-gpios property in the Device Tree. Unfortunately, the current sdhci_check_ro() function does not make use of such GPIO when available: it either uses a host controller specific ->get_ro() operation, or uses the SDHCI_PRESENT_STATE. Several host controller specific ->get_ro() functions are implemented just to check a WP GPIO state. Instead of pushing this to more controller-specific implementations, let's handle this in the core SDHCI code, just like it is already done for the CD GPIO in sdhci_get_cd(). The below patch simply changes sdhci_check_ro() to use the value of the WP GPIO if available. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: wmt-sdmmc: Drop unused includeLinus Walleij
The WMT SDMMC driver uses slot GPIO helpers and does not make any use of <linux/gpio.h> so drop this surplus include. Cc: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sunxi-mmc: Drop unused includesLinus Walleij
The Sunxi MMC driver uses slot GPIO helpers and does not make any use of <linux/gpio.h> or <linux/of_gpio.h> so drop these surplus includes. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Andre Przywara <andre.przywara@arm.com> Cc: cenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-pxav2: Drop unused includeLinus Walleij
The SDHCI PXAv2 driver uses slot GPIO helpers and does not make any use of <linux/gpio.h> so drop this surplus include. Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-bcm-kona: Drop unused includesLinus Walleij
The SDHCI BCM Kona driver uses slot GPIO helpers and does not make any use of <linux/gpio.h> or <linux/of_gpio.h> so drop these surplus includes. Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: mxs-mmc: Drop unused includesLinus Walleij
The MXS-MMC driver uses slot GPIO helpers and does not make any use of <linux/gpio.h> or <linux/of_gpio.h> so drop these surplus includes. Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: mxcmmc: Drop unused includesLinus Walleij
The MXCMMC driver uses slot GPIO helpers and does not make any use of <linux/gpio.h> or <linux/of_gpio.h> so drop these surplus includes. Cc: Jun Qian <hangdianqj@163.com> Cc: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: cb710: fix indentation issue in if blockColin Ian King
There is an if block that is not indented, fix this. Also add a break statement on the default case to clean up a cppcheck warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: core: Indicate SD specs higher than 4.0Avri Altman
SD specs version 4.x and 5.x have a dedicated slices in the SCR register. Higher versions will rely on a combination of the existing fields. Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: core: Calculate the discard arg only onceAvri Altman
In MMC, the discard arg is a read-only ext_csd parameter - set it once on card init. To be consistent, do that for SD as well even though its discard arg is always 0x0. Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: slot-gpio: Remove override_active_level on WPLinus Walleij
The argument "override_active_level" made it possible to enforce a specific polarity on the write-protect GPIO line. All callers in the kernel pass "false" to this call after I have converted all drivers to use GPIO machine descriptors, so remove the argument and clean out this. This kind of polarity inversion should be handled by the GPIO descriptor inside the GPIO library if needed. This rids us of one instance of the kludgy calls into the gpiod_get_raw_value() API. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: bcm2835: Deduplicate reset of driver data on removeLukas Wunner
The BCM2835 MMC host driver sets the device's driver data pointer to NULL on ->remove() even though the driver core subsequently does the same in __device_release_driver(). Drop the duplicate assignment. Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: bcm2835: Drop pointer to mmc_host from bcm2835_hostLukas Wunner
The BCM2835 MMC host driver uses a pointer to get from the private bcm2835_host structure to the generic mmc_host structure. However the latter is always immediately preceding the former in memory, so compute its address with a subtraction (which is cheaper than a dereference) and drop the superfluous pointer. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Alexander Graf <agraf@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: bcm2835: Drop DMA channel error pointer checkLukas Wunner
bcm2835_add_host() invokes IS_ERR_OR_NULL() on a DMA channel pointer, however dma_request_slave_channel() (which was used to populate the pointer) never returns an error pointer. So a NULL pointer check is sufficient. Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: omap: fix the maximum timeout settingAaro Koskinen
When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy: MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! [ad inf.] Emulator warnings appear to be valid. The TI document SPRU680 [1] ("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card (MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253 cycles and "0xff and 0xfe cannot be used". Fix by using 0xfd as the maximum timeout. Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810 (OMAP2420) that MMC works as before. [1] http://www.ti.com/lit/ug/spru680/spru680.pdf Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: tegra: HW Command Queue Support for Tegra SDMMCSowjanya Komatineni
This patch adds HW Command Queue for supported Tegra SDMMC controllers. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: Add ADMA3 DMA support for V4 enabled hostSowjanya Komatineni
Below are the supported DMA types in Host Control1 Register with Version 4 enable b'00 - SDMA b'01 - Not Used b'10 - ADMA2 b'11 - ADMA2 or ADMA3 ADMA3 uses Command Descriptor to issue an SD command. A multi-block data transfer is performed by using a pair of CMD descriptor and ADMA2 descriptor. ADMA3 performs multiple of multi-block data transfer by using Integrated Descriptor which is more suitable for Command Queuing to fetch both Command and Transfer descriptors. Host Capabilities register indicates the supports of ADMA3 DMA. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: atmel-mci: enable 8 bits buswidth supportNicolas Ferre
This patch adds support for 8-bit buswidth. Relevant SDCR value modified. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: renesas_sdhi: Fix card initialization failure in high speed modeTakeshi Saito
This fixes card initialization failure in high speed mode. If U-Boot uses SDR or HS200/400 mode before starting Linux and Linux DT does not enable SDR/HS200/HS400 mode, card initialization fails in high speed mode. It is necessary to initialize SCC registers during card initialization phase. HW reset function is registered only for a port with either of SDR/HS200/HS400 properties in device tree. If SDR/HS200/HS400 properties are not present in device tree, SCC registers will not be reset. In SoC that support SCC registers, HW reset function should be registered regardless of the configuration of device tree. Reproduction procedure: - Use U-Boot that support MMC HS200/400 mode. - Delete HS200/HS400 properties in device tree. (Delete mmc-hs200-1_8v and mmc-hs400-1_8v) - MMC port works high speed mode and all commands fail. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: jz4740: Remove platform data and use standard APIsPaul Cercueil
Drop the custom code to get the 'cd' and 'wp' GPIOs. The driver now calls mmc_of_parse() which will init these from devicetree or device properties. Also drop the custom code to get the 'power' GPIO. The MMC core provides us with the means to power the MMC card through an external regulator. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controllerErnest Zhang(WH)
O2 SD host controller only need set the quirk2 flag SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD when work on force 1.8v emmc mode but not normal mode Signed-off-by: Ernest Zhang <ernest.zhang@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: jz4740: Annotate implicit fall throughMathieu Malaterre
There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings (W=1). This commit removes the following warnings: drivers/mmc/host/jz4740_mmc.c:745:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/mmc/host/jz4740_mmc.c:779:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: fix return value check in sdhci_esdhc_imx_probe()Wei Yongjun
In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: fadac7488064 ("mmc: sdhci-esdhc-imx: add CMDQ support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: core: annotate implicit fall throughMathieu Malaterre
There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warning (W=1). In this particular case rewrote the comment to start with the string "fall through", so as to match the regular expression expected by GCC. Truncate the comment slightly to fit the max line length of 80 characters. This commit remove the following warning: drivers/mmc/core/host.c:196:14: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: tegra: SDMMC pads auto-calibrationSowjanya Komatineni
Program initial drive code offsets which will be used by auto calibration process. Program fixed drive strengths for SDMMC pads in pad control register when auto cal timeouts. Fixed settings are based on Pre-SI analysis of the pad design. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add DCMD support for CMDQBOUGH CHEN
Currently, USDHC do not generate transfer complete interrupt when send a non-data-command with R1b response. But if want to support DCMD in CMDQ, need to change this, the DCMD IC logic require the USDHC to enable this function, otherwise DCMD will never get a CC(command complete) interrupt. This patch set ESDHC_VEND_SPEC2_EN_BUSY_IRQ and add DCMD support. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add CMDQ supportBOUGH CHEN
Add CMDQ support for imx8qm/imx8qxp. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Rebased on top of latest changes] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: correct the maximum timeout when enable CMDQBOUGH CHEN
Change to use sdhci_set_timeout() to set the maximum timeout, so that the host can use it's own set_timeout() callback to set the maximum timeout if the host has. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXPBOUGH CHEN
Add an new esdhc_soc_data for i.MX8QXP, and add HS400_ES mode support. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Rebased on top of latest changes] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: remove the 100MHz limitation for Strobe DLLBOUGH CHEN
For some eMMC, after switch to HS400ES mode, it need to config the strobe dll target dealy even if the clock is 50MHZ or 25MHz, otherwise will meet CMD index/crc error when send CMD13 to check the switch status. [ 2.473915] IRQ status 0x000a8001 [ 2.473934] mmc2: mmc_select_hs400es failed, error -84 [ 2.473938] mmc2: error -84 whilst initialising MMC card Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: tmio: undo PM autosuspend when removing the hostNiklas Söderlund
When removing the driver make sure to undo the PM autosuspend configured when probing the host. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: tmio: fix typo in tmio_mmc_init_ocr()Niklas Söderlund
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc:sdio: Remove unneeded variable retwangbo
In sdio_bus_remove the variable is unneeded,remove it now. Signed-off-by: wangbo <wang.bo116@zte.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: Fix O2 Host PLL and card detect issueErnest Zhang(WH)
1. O2 Host Controller PLL lock status is not in compliance with CLOCK_CONTROL register bit 1 2. O2 Host Controller card detect function only work when PLL is enabled and locked Signed-off-by: Ernest Zhang <ernest.zhang@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: Moving sdhci_o2 into sdhci-pci-o2micro.cErnest Zhang(WH)
Moving sdhci_o2 into sdhci-pci-o2micro.c Signed-off-by: Ernest Zhang <ernest.zhang@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: block: fix debugfs_simple_attr.cocci warningsYueHaibing
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probeStefan Wahren
We need to handle mmc_of_parse() errors during probe otherwise the MMC driver could start without proper initialization (e.g. power sequence). Fixes: 476bf3d62d5c ("mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: add delay after the last tuning commandBOUGH CHEN
When host set the host->tuning_delay, even the last tuning command need a delay, otherwise the first command after the tuning will meet issue. Take i.MX7D as an example, there will be the following log: mmc2: switch to high-speed from hs200 failed, err:-110 mmc2: error -110 whilst initialising MMC card Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add delay between tuning cyclesBOUGH CHEN
It's observed that i.MX uSDHC needed delay between tuning cycles for HS200 successful tuning. This patch is to set 1ms delay for that. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add SD clock limitation for imx6ullBOUGH CHEN
i.MX6ULL has errata ERR010450, point out that due to SOC I/O timing limitation, for eMMC HS200 and SD/SDIO 3.0 SDR104, the clock rate can't exceed 150MHz. And for eMMC DDR52 and SD/SDIO DDR50 mode, the clock rate can't exceed 45MHz. This patch add this limit for imx6ull. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Fixed comments and whitespace] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: fix HS400 timing issueBOUGH CHEN
Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/ MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS, we can not do tuning reset, otherwise HS400 timing is not right. Here is the process of init HS400, first finish tuning in HS200 mode, then switch to HS mode and 8 bit DDR mode, finally switch to HS400 mode. If we do tuning reset in HS mode, this will cause HS400 mode lost the tuning setting, which will cause CRC error. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: usdhc: do not do tuning for DDR50 mode.BOUGH CHEN
DDR50 tuning is optinally defined in sd 3.0 spec. And i.MX uSDHC internally already uses a fixed optimized timing for DDR50, normally does not require tuning for DDR50 mode. This patch specify a new execute_tuning function for i.MX uSDHC, do not impact i.MX eSDHC. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: clear ESDHC_STD_TUNING_EN for manual tuning methodBOUGH CHEN
The bit ESDHC_STD_TUNING_EN may be configed by bootloader code if it choose to use standard tuning method. So on linux side, if choose to use manual tuning method, need to clear the bit ESDHC_STD_TUNING_EN, remove the impact of bootloader code. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: Constify driver dataAndrey Smirnov
Variant specific driver data doesn't change at run-time, so mark it as const to reflect that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci_am654: Make symbol 'sdhci_am654_ops' staticWei Yongjun
Fixes the following sparse warning: drivers/mmc/host/sdhci_am654.c:161:18: warning: symbol 'sdhci_am654_ops' was not declared. Should it be static? Fixes: aff88ff23512 ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-15Merge tag 'v5.0-rc6' into for-5.1/blockJens Axboe
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c. This is needed since io_uring is now based on the block branch, to avoid a conflict between the multi-page bvecs and the bits of io_uring that touch the core block parts. * tag 'v5.0-rc6': (525 commits) Linux 5.0-rc6 x86/mm: Make set_pmd_at() paravirt aware MAINTAINERS: Update the ocores i2c bus driver maintainer, etc blk-mq: remove duplicated definition of blk_mq_freeze_queue Blk-iolatency: warn on negative inflight IO counter blk-iolatency: fix IO hang due to negative inflight counter MAINTAINERS: unify reference to xen-devel list x86/mm/cpa: Fix set_mce_nospec() futex: Handle early deadlock return correctly futex: Fix barrier comment net: dsa: b53: Fix for failure when irq is not defined in dt blktrace: Show requests without sector mips: cm: reprime error cause mips: loongson64: remove unreachable(), fix loongson_poweroff(). sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221) KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222) kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974) signal: Better detection of synchronous signals ...
2019-02-15block: kill BLK_MQ_F_SG_MERGEMing Lei
QUEUE_FLAG_NO_SG_MERGE has been killed, so kill BLK_MQ_F_SG_MERGE too. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 22:26:46 +0000