summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2021-04-23mmc: mmc_spi: Make of_mmc_spi.c resource provider agnosticAndy Shevchenko
In order to use the same driver on non-OF platforms, make of_mmc_spi.c resource provider agnostic. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-6-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Use already parsed IRQAndy Shevchenko
SPI core already parses and maps IRQ for us if provided. Use it instead of double parsing in mmc_spi_get_pdata(). Due to above, change condition, since SPI core can hold an error pointer as invalid IRQ. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-5-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Drop unused NO_IRQ definitionAndy Shevchenko
After the commit 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()") the NO_IRQ is not used anymore, drop it for good. Fixes: 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-4-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Set up polling even if voltage-ranges is not presentAndy Shevchenko
When voltage-ranges property is not present the driver assumes that it is 3.3v (3.2v..3.4v). But at the same time it disallows polling. Fix that by dropping the comparison to 0 when no property is provided. While at it, mark voltage-ranges property optional as it was initially. Fixes: 9c43df57910b ("mmc_spi: Add support for OpenFirmware bindings") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-3-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: core: Convert mmc_of_parse_voltage() to use device property APIAndy Shevchenko
mmc_of_parse() for a few years has been using device property API. Convert mmc_of_parse_voltage() as well. At the same time switch users to new API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: core: Correct descriptions in mmc_of_parse()Andy Shevchenko
Since it has been converted to use device property API, the function and field descriptions become outdated. Correct them. Fixes: 73a47a9bb3e2 ("mmc: core: Use device_property_read instead of of_property_read") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-19Merge branch 'fixes' into nextUlf Hansson
2021-04-19mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size ↵Neil Armstrong
alignment in block mode Since commit e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode"), support for SDIO SD_IO_RW_EXTENDED transferts are properly filtered but some driver like brcmfmac still gives a block sg buffer size not aligned with SDIO block, triggerring a WARN_ONCE() with scary stacktrace even if the transfer works fine but with possible degraded performances. Simply replace with dev_warn_once() to inform user this should be fixed to avoid degraded performance. This should be ultimately fixed in brcmfmac, but since it's only a performance issue the warning should be removed. Fixes: e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210416094347.2015896-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-16mmc: dw_mmc-rockchip: Just set default sample value for legacy modeShawn Lin
.set_ios() is called from .resume() as well. For SDIO device which sets keep-power-in-suspend, nothing should be changed after resuming, as well as sample tuning value, since this value is tuned already. So we should not overwrite it with the default value. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1618539454-182170-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: sdhci-s3c: constify uses of driver/match dataKrzysztof Kozlowski
The driver data (struct sdhci_s3c_drv_data) stored in of_device_id table is allocated as const and used only in const-way. Skip unnecessary const-away casts and convert all users to work with pointer to const. This is both more logical and safer. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210415084412.51125-3-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: sdhci-s3c: correct kerneldoc of sdhci_s3c_drv_dataKrzysztof Kozlowski
Correct the name of sdhci_s3c_drv_data structure in kerneldoc: drivers/mmc/host/sdhci-s3c.c:143: warning: expecting prototype for struct sdhci_s3c_driver_data. Prototype was for struct sdhci_s3c_drv_data instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210415084412.51125-2-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: sdhci-s3c: simplify getting of_device_id match dataKrzysztof Kozlowski
Use of_device_get_match_data() to make the code slightly smaller and to remove the of_device_id table forward declaration. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210415084412.51125-1-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: tmio: always restore irq registerWolfram Sang
Currently, only SDHI on R-Car Gen2+ reinitializes the irq register during reset but it should be done on all instances. We can move it from the SDHI driver to the TMIO core, because we now have the 'sd_irq_mask_all' variable which carries the proper value to use. That also means we can remove the initialization from tmio_mmc_probe() because it calls tmio_mmc_reset(), too. We only move that tmio_mmc_reset() call there a little to ensure 'sd_irq_mask_all' is properly set. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210413083137.11171-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL975xBen Chuang
GL975x enters ASPM L1 state after a short idle in default. Enlarge the idle period to 7.9us for improving the R/W performance. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Link: https://lore.kernel.org/r/20210415032637.5219-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: core: Let eMMC sanitize not retry in case of timeout/failureBean Huo
Not all commands need to be retried in case of a timeout/failure. This is the case for the eMMC sanitize command, for example, which is issued through the ioctl interface. More precisely, in case of timeout, retrying could make the user wait for a very long time as each retry loop could last for a couple of minutes. Therefore, let's not use retries for the eMMC sanitize command. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210414212236.346813-3-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: core: Add a retries parameter to __mmc_switch functionBean Huo
Add command retries parameter to __mmc_switch(), let caller pass retries according to the caller's condition. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210414212236.346813-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (Operating Performance Points) framework updates for v5.13 from Viresh Kumar: "This adds devm variants for OPP APIs and updates few of the users as well (Yangtao Li and Dmitry Osipenko)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP API drm/panfrost: Convert to use resource-managed OPP API drm/lima: Convert to use resource-managed OPP API mmc: sdhci-msm: Convert to use resource-managed OPP API spi: spi-qcom-qspi: Convert to use resource-managed OPP API spi: spi-geni-qcom: Convert to use resource-managed OPP API serial: qcom_geni_serial: Convert to use resource-managed OPP API opp: Change return type of devm_pm_opp_attach_genpd() opp: Change return type of devm_pm_opp_register_set_opp_helper() opp: Add devres wrapper for dev_pm_opp_of_add_table opp: Add devres wrapper for dev_pm_opp_set_supported_hw opp: Add devres wrapper for dev_pm_opp_set_regulators opp: Add devres wrapper for dev_pm_opp_set_clkname
2021-04-12mmc: sdhci-st: Remove unnecessary error logLaibin Qiu
devm_ioremap_resource() has recorded error log, so it's unnecessary to record log again. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210409023801.3326572-1-qiulaibin@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: sdhci-msm: Remove unnecessary error logJia Yang
devm_ioremap_resource() has recorded error log, so it's unnecessary to record log again. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jia Yang <jiayang5@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210409015424.3277212-1-jiayang5@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: owl-mmc: Remove unnecessary error logLaibin Qiu
devm_ioremap_resource() has recorded error log, so it's unnecessary to record log again. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20210409023349.3325907-1-qiulaibin@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: renesas_sdhi: enable WAIT_WHILE_BUSYWolfram Sang
Now that we got the timeout handling in the driver correct, we can use this capability to avoid polling via the MMC core. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210409094606.4317-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: sdhci-tegra: Add required callbacks to set/clear CQE_EN bitAniruddha Tvs Rao
CMD8 is not supported with Command Queue Enabled. Add required callback to clear CQE_EN and CQE_INTR fields in the host controller register before sending CMD8. Add corresponding callback in the CQHCI resume path to re-enable CQE_EN and CQE_INTR fields. Reported-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Aniruddha Tvs Rao <anrao@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210407094617.770495-1-jonathanh@nvidia.com Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: sdhci-pci-gli: Improve GL9763E L1 entry delay to increase battery lifeBen Chuang
For GL9763E, although there is the best performance at the maximum delay. Change the value to 20us in order to have better power consumption. This change may reduce the maximum performance by 10%. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20210407093816.8863-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: moxart: Remove unused variable 'dma_time' and 'pio_time'Yang Li
Fixes the following W=1 kernel build warning(s): drivers/mmc/host/moxart-mmc.c:257:7: warning: variable ‘dma_time’ set but not used drivers/mmc/host/moxart-mmc.c:395:7: warning: variable ‘pio_time’ set but not used Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1617357231-93064-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: core: Use userland specified timeout value for eMMC sanitizeBean Huo
As the density increases, the 4-minute timeout value for sanitize is no longer feasible. At the same time, devices of different densities have different timeout values, which makes it difficult to use a common timeout value. Therefore, let's pass down the userland-specified sanitize timeout value so it can be used. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210402092432.25069-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-31mmc: sdhci-pci: Fix initialization of some SD cards for Intel BYT-based ↵Adrian Hunter
controllers Bus power may control card power, but the full reset done by SDHCI at initialization still may not reset the power, whereas a direct write to SDHCI_POWER_CONTROL can. That might be needed to initialize correctly, if the card was left powered on previously. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210331081752.23621-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-31mmc: dw_mmc-k3: use the correct HiSilicon copyrightHao Fang
s/Hisilicon/HiSilicon/g. It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang <fanghao11@huawei.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Link: https://lore.kernel.org/r/1617086448-51054-1-git-send-email-fanghao11@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-esdhc-imx: separate 100/200 MHz pinctrl states checkShawn Guo
As indicated by function esdhc_change_pinstate(), SDR50 and DDR50 require pins_100mhz, while SDR104 and HS400 require pins_200mhz. Some system design may support SDR50 and DDR50 with 100mhz pin state only (without 200mhz one). Currently the combined 100/200 MHz pinctrl state check prevents such system from running SDR50 and DDR50. Separate the check to support such system design. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20210326110214.28416-1-shawnguo@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-brcmstb: Remove CQE quirkAl Cooper
Remove the CQHCI_QUIRK_SHORT_TXFR_DESC_SZ quirk because the latest chips have this fixed and earlier chips have other CQE problems that prevent the feature from being enabled. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210325192834.42955-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci: replace mmc->parent with mmc_dev() for consistencyJisheng Zhang
As pointed out by Ulf, "both "mmc->parent" and mmc_dev(mmc) are being used in the entire c-file". Convert all the mmc->parent usage in all sdhci host driver to mmc_dev() for consistency. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210324155013.1e5faa3c@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-of-dwcmshc: set MMC_CAP_WAIT_WHILE_BUSYJisheng Zhang
The host supports HW busy detection of the device busy signaling over dat0 line. Set MMC_CAP_wAIT_WHILE_BUSY host capability. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210324154703.69f97fde@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-of-dwcmshc: fix error return code in dwcmshc_probe()Wei Yongjun
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: c2c4da37837e ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210323112956.1016884-1-weiyongjun1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-of-dwcmshc: add ACPI support for BlueField-3 SoCLiming Sun
This commit adds ACPI support in the sdhci-of-dwcmshc driver for BlueField-3 SoC. It has changes to only use the clock hierarchy for Deviec Tree since the clk is not supported by ACPI. Instead, ACPI can define 'clock-frequency' which is parsed by existing sdhci_get_property(). This clock value will be returned in function dwcmshc_get_max_clock(). Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Link: https://lore.kernel.org/r/1616453211-275165-1-git-send-email-limings@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-pci: Add PCI IDs for Intel LKFAdrian Hunter
Add PCI IDs for Intel LKF eMMC and SD card host controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210322055356.24923-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: tmio: always flag retune when resetting and a card is presentWolfram Sang
After reset, we manually flagged retune in runtime resume, but missed it in the workqueue. To fix that and avoid the problem in the future, let's flag retune in the reset handler directly whenever a card is present. Reported-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210316085717.7276-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: tmio: restore bus width when resettingTakeshi Saito
Resetting the IP core will lose the bus width information and not all code paths recover it. So, make sure the latest bus width gets restored in the reset routine. For that, tmio_mmc_set_bus_width() is moved, but not modified. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: reworded commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210316085717.7276-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: cavium: Use '"%s...", __func__' to print function nameBean Huo
Use preferred way '"%s...", __func__' to print function name. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210319121357.255176-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-acpi: Add device ID for the AMDI0041 variant of the AMD eMMC ↵James Young
controller. This variant is present on a Lenovo IdeaPad Slim 1, which uses an AMD Dali/Athlon Silver 3050e. The Windows AMD SD Host Controller driver also lists this as a valid device ID. Adding this device ID makes the internal eMMC storage on the Lenovo accessible. Consequently this makes Linux installable and usable on it as well. Signed-off-by: James Young <james@pocketfluff.org> Link: https://lore.kernel.org/r/20210318124025.3002861-1-james@pocketfluff.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: renesas_sdhi: do hard reset if possibleWolfram Sang
All recent SDHI instances can be reset via the reset controller. If one is found, use it instead of the open coded reset. This is to get a future-proof sane reset state. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210317091622.31890-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: renesas_sdhi: break SCC reset into own functionWolfram Sang
renesas_sdhi_reset used to mainly reset the SCC but is now doing more and even more will be added. So, factor out SCC reset to have a clear distinction when we want to reset either SCC or SDHI+SCC. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210317091622.31890-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: tmio: abort DMA before resetWolfram Sang
We will soon allow resetting the whole IP core via a reset controller. For this case, DMA must be terminated before the actual reset. For the other cases, it is probably better, too. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210317091622.31890-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-of-dwcmshc: add rockchip platform supportShawn Lin
sdhci based synopsys MMC IP is also used on some rockchip platforms, so add a basic support here. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1615879102-45919-3-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-esdhc-imx: Use device_get_match_data()Fabio Estevam
The retrieval of driver data can be a bit simplified by using device_get_match_data(), so switch to it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210314230824.148969-2-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-esdhc-imx: Remove non-DT stubFabio Estevam
i.MX has been converted to a devicetree only platform, so remove the non-DT stub for sdhci_esdhc_imx_probe_dt(). Also, make the driver depend on OF now. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210314230824.148969-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: core: Fix hanging on I/O during system suspend for removable cardsUlf Hansson
The mmc core uses a PM notifier to temporarily during system suspend, turn off the card detection mechanism for removal/insertion of (e)MMC/SD/SDIO cards. Additionally, the notifier may be used to remove an SDIO card entirely, if a corresponding SDIO functional driver don't have the system suspend/resume callbacks assigned. This behaviour has been around for a very long time. However, a recent bug report tells us there are problems with this approach. More precisely, when receiving the PM_SUSPEND_PREPARE notification, we may end up hanging on I/O to be completed, thus also preventing the system from getting suspended. In the end what happens, is that the cancel_delayed_work_sync() in mmc_pm_notify() ends up waiting for mmc_rescan() to complete - and since mmc_rescan() wants to claim the host, it needs to wait for the I/O to be completed first. Typically, this problem is triggered in Android, if there is ongoing I/O while the user decides to suspend, resume and then suspend the system again. This due to that after the resume, an mmc_rescan() work gets punted to the workqueue, which job is to verify that the card remains inserted after the system has resumed. To fix this problem, userspace needs to become frozen to suspend the I/O, prior to turning off the card detection mechanism. Therefore, let's drop the PM notifiers for mmc subsystem altogether and rely on the card detection to be turned off/on as a part of the system_freezable_wq, that we are already using. Moreover, to allow and SDIO card to be removed during system suspend, let's manage this from a ->prepare() callback, assigned at the mmc_host_class level. In this way, we can use the parent device (the mmc_host_class device), to remove the card device that is the child, in the device_prepare() phase. Reported-by: Kiwoong Kim <kwmad.kim@samsung.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210310152900.149380-1-ulf.hansson@linaro.org Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
2021-03-30mmc: sdhci: Use "mmc" directly rather than "host->mmc"Jisheng Zhang
Clean up the code to use the "mmc" directly instead of "host->mmc". If the code sits in hot code path, this clean up also brings trvial performance improvement. Take the sdhci_post_req() for example: before the patch: ... 8d0: a9be7bfd stp x29, x30, [sp, #-32]! 8d4: 910003fd mov x29, sp 8d8: f9000bf3 str x19, [sp, #16] 8dc: f9400833 ldr x19, [x1, #16] 8e0: b9404261 ldr w1, [x19, #64] 8e4: 34000161 cbz w1, 910 <sdhci_post_req+0x50> 8e8: f9424400 ldr x0, [x0, #1160] 8ec: d2800004 mov x4, #0x0 // #0 8f0: b9401a61 ldr w1, [x19, #24] 8f4: b9403262 ldr w2, [x19, #48] 8f8: f9400000 ldr x0, [x0] 8fc: f278003f tst x1, #0x100 900: f9401e61 ldr x1, [x19, #56] 904: 1a9f17e3 cset w3, eq // eq = none 908: 11000463 add w3, w3, #0x1 90c: 94000000 bl 0 <dma_unmap_sg_attrs> ... After the patch: ... 8d0: a9be7bfd stp x29, x30, [sp, #-32]! 8d4: 910003fd mov x29, sp 8d8: f9000bf3 str x19, [sp, #16] 8dc: f9400833 ldr x19, [x1, #16] 8e0: b9404261 ldr w1, [x19, #64] 8e4: 34000141 cbz w1, 90c <sdhci_post_req+0x4c> 8e8: b9401a61 ldr w1, [x19, #24] 8ec: d2800004 mov x4, #0x0 // #0 8f0: b9403262 ldr w2, [x19, #48] 8f4: f9400000 ldr x0, [x0] 8f8: f278003f tst x1, #0x100 8fc: f9401e61 ldr x1, [x19, #56] 900: 1a9f17e3 cset w3, eq // eq = none 904: 11000463 add w3, w3, #0x1 908: 94000000 bl 0 <dma_unmap_sg_attrs> ... We saved one ldr instruction: "ldr x0, [x0, #1160]" Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210311174046.597d1951@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-pci: Avoid comma separated statementsJisheng Zhang
Use semicolons. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210311181432.6385cd2b@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: via-sdmmc: remove unneeded variable 'ret'Yang Li
Fix the following coccicheck warning: ./drivers/mmc/host/via-sdmmc.c:1274:5-8: Unneeded variable: "ret". Return "0" on line 1295 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1615272478-52458-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: dw_mmc: simplify optional reset handlingPhilipp Zabel
As of commit bb475230b8e5 ("reset: make optional functions really optional"), the reset framework API calls use NULL pointers to describe optional, non-present reset controls. This allows to return errors from devm_reset_control_get_optional and to call reset_control_(de)assert unconditionally. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210305090724.18832-1-p.zabel@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdhci-st: simplify optional reset handlingPhilipp Zabel
As of commit bb475230b8e5 ("reset: make optional functions really optional"), the reset framework API calls use NULL pointers to describe optional, non-present reset controls. This allows to return errors from devm_reset_control_get_optional and to call reset_control_(de)assert unconditionally. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210305090827.19124-1-p.zabel@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 10:38:19 +0000