summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci.c
AgeCommit message (Collapse)Author
2017-10-30mmc: sdhci: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: Add quirk to indicate MMC_RSP_136 has CRCKishon Vijay Abraham I
TI's implementation of sdhci controller used in DRA7 SoC's has CRC in responses with length 136 bits. Add quirk to indicate the controller has CRC in MMC_RSP_136. If this quirk is set sdhci library shouldn't shift the response present in SDHCI_RESPONSE register. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: Tidy reading 136-bit responsesAdrian Hunter
Read each register only once and move the code to a separate function so that it is not jammed against the 80 column margin. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: fix SDHCI_QUIRK_NO_HISPD_BIT handlingyangbo lu
SD controller with SDHCI_QUIRK_NO_HISPD_BIT quirk probably use high speed enable bit for other purpose. So this bit shouldn't be changed for high speed enabling for this type of SD controller. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: key 8BITBUS bit off MMC_CAP_8_BIT_DATAMichał Mirosław
Hosts supporting 8-bit bus are marked accordingly. If MMC_CAP_8_BIT_DATA is not among host capabilities, 8BITBUS bit will never be set and it is not cleared in case some non-SDHCI3 host uses it for something else. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: add sdma_boundary member to struct sdhci_hostSrinivas Kandagatla
This patch adds sdma_boundary member to struct sdhci_host to give more flexibility to drivers to control the sdma boundary buffer value and also to fix issue on some sdhci controllers which are broken when HOST SDMA Buffer Boundary is programmed in Block Size Register (0x04) when using ADMA. Qualcomm sdhci controller is one of such type, writing to this bits is un-supported. Default value of sdma_boundary is set to SDHCI_DEFAULT_BOUNDARY_ARG. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: ignore restoring the I/O state if MMC_POWER_OFFZhoujie Wu
One issue was found on a removable high speed sd card with runtime pm enabled. When SD card is unplugged, it keep printing "Switching to 3.3V signalling voltage failed". And found below sequence triggers the error. mmc_rescan -> mmc_sd_detect -> mmc_power_off -- mmc->ios.vdd is updated to 0. -> mmc_claim_host -> sdhci_runtime_resume_host -> sdhci_start_signal_voltage_switch -> mmc_regulator_set_vqmmc -> mmc_ocrbitnum_to_vdd When mmc_ocrbitnum_to_vdd is called, the mmc->ios.vdd is 0, so it always return -EINVAL. The signal switch will always fail and print out warning. Ignore restoring the I/O state when runtime resume if MMC_POWER_OFF. Signed-off-by: Zhoujie Wu <zjwu@marvell.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: remove CONFIG_MMC_DEBUG from the driverShawn Lin
sdhci uses CONFIG_MMC_DEBUG for showing ADMA descriptor when occurring ADMA error. And it's also used to dump the registers whenever calling sdhci_add_host. On one hand, I don't see any burden to always print the state ADMA descriptor as it's rare and will help folks better understand what was happening when seeing ADMA error. On the other, folks may be interested in checking some registers at probe time. So we remove the sdhci_dumpregs from __sdhci_add_host and print some really useful registers in sdhci_setup_host. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci: Control the delay between tuning commandsAdrian Hunter
The delay between tuning commands for SD cards is not part of the specification. A driver that needs it probably needs it for eMMC too, whereas most drivers would probably like to set it to 0. Make it a host member (host->tuning_delay) that defaults to the existing behaviour. Drivers can set it to zero to eliminate the delay, or set it to a positive value to always have a delay. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.cHu Ziji
Export sdhci_enable_sdio_irq() from sdhci.c. Thus vendor SDHC driver can implement its specific SDIO irq control. Signed-off-by: Hu Ziji <huziji@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.cHu Ziji
Export sdhci_start_signal_voltage_switch() from sdhci.c. Thus vendor sdhci driver can implement its own signal voltage switch routine. Signed-off-by: Hu Ziji <huziji@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci: Export sdhci_set_ios() from sdhci.cHu Ziji
Export sdhci_set_ios() in sdhci.c. Thus vendor sdhci driver can implement its own set_ios() routine. Signed-off-by: Hu Ziji <huziji@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: use new core function mmc_get_dma_dirHeiner Kallweit
Use new core function mmc_get_dma_dir(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci: clarify the get_timeout_clock callbackShawn Lin
Currently the get_timeout_clock callback doesn't clearly have a statement that it needs the variant drivers to return the timeout clock rate in kHz if the SDHCI_TIMEOUT_CLK_UNIT isn't present, otherwise the variant drivers should return it in MHz. It's also very likely that further variant drivers which are going to use this callback will be confused by this situation. Given the fact that moderm sdhci variant hosts are very prone to get the timeout clock from common clock framework (actually the only three users did that), it's more natural to return the value in Hz and we make an explicit comment there. Then we put the unit conversion inside the sdhci core. Thus will improve the code and prevent further misuses. Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci: Add CQE supportAdrian Hunter
Add an interrupt hook and helper functions for enabling, disabling and delivering interrupts to a CQE. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Factor out sdhci_set_default_irqsAdrian Hunter
Factor out sdhci_set_default_irqs(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Add sdhci_cleanup_hostAdrian Hunter
Add sdhci_cleanup_host() to cleanup __sdhci_add_host(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Export sdhci_dumpregsAdrian Hunter
Export sdhci_dumpregs so that it can be called by drivers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Improve register dump print formatAdrian Hunter
Ensure all prints start with the mmc host name, and the text all lines up. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Use sdhci_readl() not readl() in sdhci_dumpregs()Adrian Hunter
Use sdhci io wrappers consistently. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Add response register to register dumpAdrian Hunter
Add response register to register dump. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Improve debug print formatAdrian Hunter
Ensure all debug prints start with the mmc host name. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Reduce spin lock usage in sdhci_execute_tuningAdrian Hunter
Tuning execution is already synchronized with respect to other host operations by upper layers "claiming" the host, which also takes care of runtime pm. There can be no requests in progress. Retain the spin lock usage only for ensuring that sending tuning commands is synchronized with respect to the interrupt handler. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Do not use spin lock in set_ios pathsAdrian Hunter
The spin lock is not necessary in set_ios. Anything that is racing with changes to the I/O state is already broken. The mmc core already provides synchronization via "claiming" the host. So remove spin_lock and friends from sdhci_set_ios and related callbacks. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Remove ->select_drive_strength() callbackAdrian Hunter
Drivers can use the host operation directly, so remove this now unused callback. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Let drivers decide whether to use mmc_retune_needed() with pmAdrian Hunter
Devices might save and restore tuning values so that re-tuning might not be needed after a pm transition. Let drivers decide by pushing the mmc_retune_needed() logic down to them. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-04-24mmc: sdhci: Optimize delay loopsAdrian Hunter
The delay loops for reset and clock enable always take at least 1 ms because they use mdelay(1). However they can take a lot less time e.g. less than 50us. Use ktime and reduce the delay to 10 microseconds per loop. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-03-30mmc: sdhci: Disable runtime pm when the sdio_irq is enabledHans de Goede
SDIO cards may need clock to send the card interrupt to the host. On a cherrytrail tablet with a RTL8723BS wifi chip, without this patch pinging the tablet results in: PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data. 64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=78.6 ms 64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1760 ms 64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=753 ms 64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.88 ms 64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=795 ms 64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1841 ms 64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=810 ms 64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1860 ms 64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=812 ms 64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=48.6 ms Where as with this patch I get: PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data. 64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=3.96 ms 64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1.97 ms 64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=17.2 ms 64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=2.46 ms 64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=2.83 ms 64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1.40 ms 64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=2.10 ms 64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1.40 ms 64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=2.04 ms 64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=1.40 ms Cc: Dong Aisheng <b29396@freescale.com> Cc: Ian W MORRISON <ianwmorrison@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-03-23mmc: sdhci: Do not disable interrupts while waiting for clockAdrian Hunter
Disabling interrupts for even a millisecond can cause problems for some devices. That can happen when sdhci changes clock frequency because it waits for the clock to become stable under a spin lock. The spin lock is not necessary here. Anything that is racing with changes to the I/O state is already broken. The mmc core already provides synchronization via "claiming" the host. Although the spin lock probably should be removed from the code paths that lead to this point, such a patch would touch too much code to be suitable for stable trees. Consequently, for this patch, just drop the spin lock while waiting. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2017-02-13mmc: sdhci: Clear SDHCI_HS400_TUNING flag after platform_execute_tuningRitesh Harjani
Clear SDHCI_HS400_TUNING flag after platform_execute_tuning so that platform_execute_tuning may use it if needed. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: use empty initializer list to zero-clear structuresMasahiro Yamada
In the MMC subsystem, we see such initializers that only clears the first member explicitly. For example, struct mmc_request mrq = {NULL}; sets the first member (.sbc) to NULL explicitly. However, this is an unstable form because we may insert a non-pointer member at the top of the struct mmc_request in the future. (if we do so, the compiler will spit warnings.) So, using a designated initializer is preferred coding style. The expression above is equivalent to: struct mmc_request mrq = { .sbc = NULL }; Of course, this does not express our intention. We want to fill all struct members with zeros. Please note struct members are implicitly zero-cleared unless otherwise specified in the initializer. After all, the most reasonable (and stable) form is: struct mmc_request mrq = {}; Do likewise for mmc_command, mmc_data as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-01-31mmc: sdhci: Ignore unexpected CARD_INT interruptsGabriel Krisman Bertazi
One of our kernelCI boxes hanged at boot because a faulty eSDHC device was triggering spurious CARD_INT interrupts for SD cards, causing CMD52 reads, which are not allowed for SD devices. This adds a sanity check to the interruption path, preventing that illegal command from getting sent if the CARD_INT interruption should be disabled. This quirk allows that particular machine to resume boot despite the faulty hardware, instead of getting hung dealing with thousands of mishandled interrupts. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: <stable@vger.kernel.org>
2016-12-20mmc: sdhci: Fix to handle MMC_POWER_UNDEFINEDAdrian Hunter
Since commit c2c24819b280 ("mmc: core: Don't power off the card when starting the host"), the power state can still be MMC_POWER_UNDEFINED after mmc_start_host() is called. That can trigger a warning in SDHCI during runtime resume as it tries to restore the I/O state. Handle MMC_POWER_UNDEFINED simply by not updating the I/O state in that case. Fixes: c2c24819b280 ("mmc: core: Don't power off the card when starting the host") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-08mmc: sdhci: export sdhci_execute_tuning()Masahiro Yamada
Some SDHCI-compat controllers support not only SD, but also eMMC, but they use different commands for tuning: CMD19 for SD, CMD21 for eMMC. Due to the difference of the underlying mechanism, some controllers (at least, the Cadence IP is the case) provide their own registers for the eMMC tuning. This commit will be useful when we want to override .execute_tuning callback (for eMMC HS200 tuning), but still let it fall back to sdhci_execute_tuning() for SD timing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Tidy tuning loopAdrian Hunter
Tidy the tuning loop by moving it to a separate function and making it a for-loop. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Simplify tuning block size logicAdrian Hunter
There are only 2 possible block sizes, so simplify 2 if-statements into 1. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Factor out tuning helper functionsAdrian Hunter
Factor out some functions to tidy up the code in sdhci_execute_tuning. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Use mmc_abort_tuning()Adrian Hunter
Use mmc_abort_tuning() instead of open-coding the stop command. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Always allow tuning to fall back to fixed samplingAdrian Hunter
SDHCI falls back to fixed sampling if there is an error during tuning. However it also reports an error unless there is periodic re-tuning. That is not the best option because: a) there is a reasonable chance that fixed sampling will work, especially at room temperature. b) re-tuning will be done again anyway if there are CRC errors. Change to return no error always when falling back to fixed sampling. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Fix tuning reset after exhausting the maximum number of loopsAdrian Hunter
If the driver has exhausted the maximum number of tuning loops, then fixed sampling is used. To do that both SDHCI_CTRL_TUNED_CLK and SDHCI_CTRL_EXEC_TUNING must be reset to 0, but only SDHCI_CTRL_TUNED_CLK was being reset. Reset SDHCI_CTRL_EXEC_TUNING to 0 also. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Fix recovery from tuning timeoutAdrian Hunter
Clearing the tuning bits should reset the tuning circuit. However there is more to do. Reset the command and data lines for good measure, and then for eMMC ensure the card is not still trying to process a tuning command by sending a stop command. Note the JEDEC eMMC specification says the stop command (CMD12) can be used to stop a tuning command (CMD21) whereas the SD specification is silent on the subject with respect to the SD tuning command (CMD19). Considering that CMD12 is not a valid SDIO command, the stop command is sent only when the tuning command is CMD21 i.e. for eMMC. That addresses cases seen so far which have been on eMMC. Note that this replaces the commit fe5fb2e3b58f ("mmc: sdhci: Reset cmd and data circuits after tuning failure") which is being reverted for v4.9+. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dan O'Donovan <dan@emutex.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure"Adrian Hunter
This reverts commit fe5fb2e3b58f ("mmc: sdhci: Reset cmd and data circuits after tuning failure"). A better fix is available, and it will be applied to older stable releases, so get this out of the way by reverting it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: delete is_first_req parameter from pre-request callbackLinus Walleij
The void (*pre_req) callback in the struct mmc_host_ops vtable is passing an argument "is_first_req" indicating whether this is the first request or not. None of the in-kernel users use this parameter: instead, since they all just do variants of dma_map* they use the DMA cookie to indicate whether a pre* callback has already been done for a request when they decide how to handle it. Delete the parameter from the callback and all users, as it is just pointless cruft. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: sdhci: Factor out sdhci_enable_clkRitesh Harjani
Factor out sdhci_enable_clk from sdhci_set_clock and make it EXPORT_SYMBOL so that it can be called. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: sdhci: Use sdhci-caps-mask and sdhci-caps to change the caps read ↵Zach Brown
during __sdhci_read_caps The sdhci capabilities register can be incorrect. The sdhci-caps-mask and sdhci-caps dt properties specify which bits of the register are incorrect and what their values should be. This patch makes the sdhci driver use those properties to correct the caps during __sdhci_read_caps. During __sdhci_read_caps Use the sdhci-caps-mask property to turn off the incorrect bits of the sdhci register after reading them. Use the sdhci-caps to turn on bits after using sdhci-caps-mask to turn off the incorrect ones. Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: sdhci: put together into one condition checkingJaehoon Chung
value of ios->timing is not related with SDCHI v3.0. If Controller version is v3.0, SDHCI_QUIRK_NO_HISPD_BIT is meaningless. To prevent the setting wrong bit moves into one condition checking. (e.g sdhci-s3c doesn't use SDHCI_CTRL_HISPD bit, instead using this bit as other purpose.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-07mmc: sdhci: Fix missing enhanced strobe setting during runtime resumeAdrian Hunter
Restore enhanced strobe setting during runtime resume. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-07mmc: sdhci: Reset cmd and data circuits after tuning failureAdrian Hunter
To prevent subsequent commands failing, ensure the cmd and data circuits are reset after a tuning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-07mmc: sdhci: Fix unexpected data interrupt handlingAdrian Hunter
In the busy response case (i.e. !host->data), an unexpected data interrupt would result in clearing the data command as though it had completed but without informing the upper layers and thus resulting in a hang. Fix by only clearing the data command for data interrupts that are expected. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-07mmc: sdhci: Fix CMD line reset interfering with ongoing data transferAdrian Hunter
CMD line reset during an ongoing data transfer can cause the data transfer to hang. Fix by delaying the reset until the data transfer is finished. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 07:43:48 +0000