summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-tegra.c
AgeCommit message (Collapse)Author
2016-02-29mmc: sdhci-tegra: use sdhci_pltfm_init for private allocationJisheng Zhang
Commit 0e748234293f ("mmc: sdhci: Add size for caller in init+register") allows users of sdhci_pltfm to allocate private space in calls to sdhci_pltfm_init+sdhci_pltfm_register. This patch migrates sdhci-tegra to this allocation. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05mmc: tegra: use correct accessor for misc ctrl registerLucas Stach
The misc control register is 32bit wide, the used readw/writew accessors only mainipulate the low 16bit of this register. It currently doesn't matter as all the bit changed are located in the lower half, but together with the u32 variable used to hold the contents of the register it is seriously confusing. Switch to 32bit accessors to avoid any future breakage. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05mmc: tegra: enable UHS-I modesLucas Stach
Keep the quirk bits, as Tegra30 and Tegra114 host have different levels of support for UHS-I modes and so need different spare bits to be set, but change the logic to be positive. Tegra210 needs a different tuning sequence than Tegra30+. Disable UHS modes until support for this is properly added. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-28mmc: tegra: implement UHS tuningLucas Stach
This implements the UHS tuning sequence in a similar way to the one contained in the TRM. It deviates in the way how to check if the tap value is passing, by using the common Linux MMC function, which does not only check for data CRC errors, but also if the received block pattern is correct. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-28mmc: tegra: disable SPI_MODE_CLKENLucas Stach
The Tegra30 and up TRM states that this bit should always be programmed to 0 by driver software. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-28mmc: tegra: implement module external clock changeLucas Stach
Allow the the driver to change the clock supplied from the CAR directly, minimizing the need to divide the clock inside the SDMMC module itself. This allows for higher clock speeds than the default 48MHz supplied to the module and is a prerequisite to support DDR signaling modes, where the Tegra host needs to be run with a fixed internal divider of 2 for data to be sampled correctly. (Tegra K1 TRM v03p chapter 29.7.1.1) Also enable the broken preset value quirk as the preset values need to be adapted to the changed clocking. While Tegra114+ allows this through vendor registers, there is no such way for Tegra30. Takes the easy way out and keep things consistent between the different SoC generations by flagging the preset registers as unusable. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-22mmc: tegra: Add Tegra210 supportThierry Reding
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-22mmc: tegra: Constify SoC dataThierry Reding
The data in the SoC description structures is static and can therefore reside in read-only memory. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-01mmc: sdhci-tegra: convert to use GPIO descriptorsMylene JOSSERAND
Modify the driver to handle GPIOs using the descriptor API. Signed-off-by: Mylene JOSSERAND <josserand.mylene@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-23mmc: tegra: Optimize write_w path for tegra114 and laterRhyland Klein
Setup a different set of sdhci_ops for tegra114 and later so that the write_w callback is only used on tegra114. This allows us to remove the NVQUIRK_SHADOW_XFER_MODE_REG and simply the logic in tegra_sdhci_writew. Suggested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-23mmc: sdhci: set the .remove to sdhci_pltfm_unregister()Kevin Hao
In these drivers, the driver specific .remove function just a simple wrapper of function sdhci_pltfm_unregister(). So remove these wrappers and just set .remove to sdhci_pltfm_unregister(). Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-23mmc: sdhci: disable the clock in sdhci_pltfm_unregister()Kevin Hao
So we can avoid to sprinkle the clk_disable_unprepare() in many drivers. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-23mmc: tegra: use devm help functions to get the clk and gpioKevin Hao
Simplify the error and remove path. Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-29mmc: tegra: Write xfer_mode, CMD regs in togetherPavan Kunapuli
If there is a gap between xfer mode and command register writes, tegra SDMMC controller can sometimes issue a spurious command before the CMD register is written. To avoid this, these two registers need to be written together in a single write operation. This is implemented as an NVQUIRK as it applies to T114, T124 and T132. Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: remove .owner field for drivers using module_platform_driverPeter Griffin
This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: tegra: Do not include asm/gpio.hThierry Reding
This doesn't seem to be used any longer and removing the include fixes 64-bit ARM builds. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-23mmc: tegra: fix reporting of base clock frequencyAndrew Bresticker
Tegra SDHCI controllers, by default, report a base clock frequency of 208Mhz in SDHCI_CAPABILTIES which may or may not be equal to the actual base clock frequency. This is because the clock rate is configured by the clock controller, which is external to the SD/MMC controller. Since the SD/MMC controller has no knowledge of how this clock is configured, it will simply report the maximum frequency. While the reported value can be overridden by setting BASE_CLK_FREQ in VENDOR_CLOCK_CTRL on Tegra30 and later SoCs, just set CAP_CLOCK_BASE_BROKEN and supply sdhci_pltfm_clk_get_max_clock(), which simply does a clk_get_rate(), as the get_max_clock() callback. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23mmc: tegra: disable UHS modesAndrew Bresticker
Program TEGRA_SDHCI_VENDOR_MISC_CTRL so that UHS modes aren't advertised in SDHCI_CAPABILITIES_1. While the Tegra SDHCI controller does support these modes, they require Tegra-specific tuning and calibration routines which the driver does not support yet. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-tegra: get rid of special PRESENT_STATE register handlingRussell King
sdhci-tegra provides a get_ro method, which overrides the checking of the write protect bit in the PRESENT_STATE register in sdhci.c: if (host->flags & SDHCI_DEVICE_DEAD) is_readonly = 0; else if (host->ops->get_ro) is_readonly = host->ops->get_ro(host); else is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_WRITE_PROTECT); This means it's pointless detecting accesses to this register and manually setting the SDHCI_WRITE_PROTECT as it has no effect. This means that the whole of tegra_sdhci_readl() can be removed and we can use the builtin sdhci readl functionality here. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert sdhci_set_uhs_signaling() into a library functionRussell King
Add sdhci_set_uhs_signaling() and always call the set_uhs_signaling method. This avoids quirks being added into sdhci_set_uhs_signaling(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert sdhci_set_clock() into a library functionRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert reset into a library functionRussell King
Rather than having platform_reset_enter/platform_reset_exit methods, turn the core of the reset handling into a library function which platforms can call at the appropriate moment in their (new) reset method. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert generic bus width setup to library functionRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13mmc: tegra: add support for Tegra124Stephen Warren
Tegra124's MMC controller is very similar to earlier SoC generations, and can be supported by the same driver. However, there are some non-backwards-compatible HW differences, and hence a new DT compatible value must be used to describe the HW. This patch updates the driver to support that new compatible value. That said, the HW differences are only relevant when enabling certain high-performance transfer modes. Since the driver is currently very simple and doesn't enable those modes, we don't actually need to address any of these HW differences in the code yet, hence the simple nature of this patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: tegra: handle mmc_of_parse() errors during probeSimon Baatz
Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-31mmc: sdhci: Add size for caller in init+registerChristian Daudt
Add a param to allow users of sdhci_pltfm to allocate private space in calls to sdhci_pltfm_init+sdhci_pltfm_register. This is implemented in the same way as sdhci does for its users. None of the users have been migrated yet and are passing in zero to retain their private allocation. - todo: migrate clients to using allocation this way - todo: remove priv variable once migration is complete Also removed unused variable in sdhci_pltfm_init fn Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-23mmc: sdhci-tegra: fix MODULE_DEVICE_TABLEArnd Bergmann
The symbol referenced in MODULE_DEVICE_TABLE must match the actual table, otherwise we get a build error like: sdhci-tegra.c:206:34: error: '__mod_of_device_table' aliased to undefined symbol 'sdhci_dt_ids' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: sdhci: Constify sdhci_ops structs where possibleLars-Peter Clausen
Basically all drivers can have sdhci_ops struct const, but almost none do. This patch constifies all sdhci_ops struct declarations where possible. The patch was auto-generated with the following coccinelle semantic patch: // <smpl> @r1@ identifier ops; identifier fld; @@ ops.fld = ...; @disable optional_qualifier@ identifier ops != r1.ops; @@ static +const struct sdhci_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: sdhci_pltfm: Constify sdhci_pltfm_dataLars-Peter Clausen
The sdhci_pltfm_data struct is never modified within the sdhci_pltfm module. So make the pdata parameter to sdhci_pltfm_init and sdhci_pltfm_register const. This allows drivers to declare their sdhci_pltfm_data struct as const. This patch also makes the sdhci_pltfm_data declarations const where possible. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-19mmc: tegra: use mmc_of_parse to get the support of standard MMC DT bindingsJoseph Lo
Updating the sdhci-tegra driver to use mmc_of_parse to support standard MMC DT bindings. Then we can remove the redundant code that already support in generic MMC core. Signed-off-by: Joseph Lo <josephl@nvidia.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-06mmc: sdhci-tegra: add basic support for Tegra114Rhyland Klein
The mmc controller on Tegra114 platforms is basically compatible with the settings used for Tegra30. However there is a difference where we don't need the extra ENABLE_SDHCI_SPEC_300 quirk as Tegra114 hardware advertises v3.0 support already. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-06mmc: sdhci-tegra: cleanup ifdefsRhyland Klein
The structs wrapped with the SOC ifdefs are small enough where having them always there shouldn't be a big overhead. Removing the ifdefs also makes the code a little cleaner. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: tegra: assume CONFIG_OF, remove platform dataStephen Warren
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Platform data is therefore no longer required. Rework the driver to parse the device tree directly into struct sdhci_tegra. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: sdhci: rename platform_8bit_width to platform_bus_widthSascha Hauer
The 8bit in the function name is misleading. When set, it will be used to set the bus width, regardless of whether 8bit or another bus width is requested, so change the function name to platform_bus_width. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-28mmc: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mmc: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-mmc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mmc: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mmc: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-11Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
2012-10-10Merge tag 'mmc-merge-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)" * tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits) mmc: core: Fixup broken suspend and eMMC4.5 power off notify mmc: sdhci-spear: Add clk_{un}prepare() support mmc: sdhci-spear: add device tree bindings mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks mmc: dt: Support "broken-cd" property in sdhci-pltfm mmc: sdhci-s3c: fix the wrong number of max bus clocks mmc: sh-mmcif: avoid oops on spurious interrupts mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ mmc: sdhci-s3c: Fix crash on module insertion for second time mmc: sdhci-s3c: Enable only required bus clock mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration" mmc: mxcmmc: fix bug that may block a data transfer forever mmc: omap_hsmmc: Pass on the suspend failure to the PM core mmc: atmel-mci: AP700x PDC is not connected to MCI mmc: atmel-mci: DMA can be used with other controllers mmc: mmci: use clk_prepare_enable and clk_disable_unprepare mmc: sdhci-s3c: Add device tree support mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ...
2012-10-07ARM: tegra: fix mismerges of header file inclusionsOlof Johansson
Another mishandled merge conflict by me, where the header file renames and the removal of gpio includes clashed and I chose the wrong end result. Fixes build breakage for tegra_defconfig. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-14ARM: tegra: move sdhci platform_data definitionArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This the definitions for the tegra sdhci driver out of the tegra include directories, which is the last one for this platform. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Chris Ball <cjb@laptop.org>
2012-09-04mmc: tegra: convert to device tree support onlyJoseph Lo
When compiling a kernel that supports only Tegra30 and not Tegra20, the SDHCI driver will fail to compile since the of_match_device() failure fallback code unconditinally references soc_data_tegra20, which is only compiled in when Tegra20 support is enabled. In Kernel 3.7, both Tegra20 and Tegra30 will only support booting using device tree, Hence, there is never a need to fall back to using soc_data_tegra20 if of_mach_device() fails. Instead, make this case an error. This removes the reference to soc_data_tegra20, and hence solves the compile failure. Signed-off-by: Joseph Lo <josephl@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-06Merge branch 'for-3.6/common-clk' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/clk From Stephen Warren <swarren@wwwdotorg.org>: This branch contains numerous changes required as a baseline in order to convert Tegra to the common clock framework. The intention was to also include patches to actually convert Tegra to the common clock framework. However, those patches appeared late in the kernel cycle and currently cause regressions on some boards, so were dropped for now. * 'for-3.6/common-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare mmc: tegra: add clk_prepare/clk_unprepare i2c: tegra: Add clk_prepare/clk_unprepare ARM: tegra: add clk_prepare/clk_unprepare Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-06-11mmc: tegra: add clk_prepare/clk_unpreparePrashant Gaikwad
Use clk_prepare/clk_unprepare as required by the generic clk framework. Cc: cjb@laptop.org Cc: linux-mmc@vger.kernel.org Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-11mmc: tegra: use bus-width property instead of support-8bitStephen Warren
Update the driver to parse the new unified bus-width property introduced in commit 7f21779 "mmc: dt: Consolidate DT bindings", instead of the legacy support-8bit property. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-25Merge tag 'mmc-merge-for-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC changes from Chris Ball - at91-mci: This driver will be replaced by atmel-mci in 3.7. - atmel-mci: Add support for old at91-mci hardware. - dw_mmc: Allow multiple controllers; this previously caused corruption. - imxmmc: Remove this driver, replaced by mxcmmc. - mmci: Add device tree support. - omap: Allow multiple controllers. - omap_hsmmc: Auto CMD12, DDR support. - tegra: Support SD 3.0 spec. Fix up the usual trivial conflicts in feature-removal-schedule.txt * tag 'mmc-merge-for-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (38 commits) mmc: at91-mci: this driver is now deprecated mmc: omap_hsmmc: pass IRQF_ONESHOT to request_threaded_irq mmc: block: Allow disabling 512B sector size emulation mmc: atmel-mci: add debug logs mmc: atmel-mci: add support for version lower than v2xx mmc: atmel-mci: change the state machine for compatibility with old IP mmc: atmel-mci: the r/w proof capability lack was not well managed mmc: dw_mmc: Fixed sdio interrupt mask bit setting bug mmc: omap: convert to module_platform_driver mmc: omap: make it behave well as a module mmc: omap: convert to per instance workqueue mmc: core: Remove dead code mmc: card: Avoid null pointer dereference mmc: core: Prevent eMMC VCC supply to be cut from late init mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue mmc: queue: remove redundant memsets mmc: queue: rename mmc_request function mmc: core: skip card initialization if power class selection fails mmc: core: fix the signaling 1.8V for HS200 mmc: core: fix the decision of HS200/DDR card-type ...
2012-04-22mmc: tegra: support SDHCI SPEC 300Pavan Kunapuli
Tegra3 SDHOST controller doesn't advertise v3.00 support by default. This support has to be enabled by configuring a vendor register in the tegra3 sd host address space. Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-18gpio: tegra: Hide tegra_gpio_enable/disable()Stephen Warren
Recent pinctrl discussions concluded that gpiolib APIs should in fact do whatever is required to mux a GPIO onto pins, by calling pinctrl APIs if required. This change implements this for the Tegra GPIO driver, and removes calls to the Tegra-specific APIs from drivers and board files. Cc: Chris Ball <cjb@laptop.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Chris Ball <cjb@laptop.org> # for sdhci-tegra.c Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-28Merge tag 'mmc-merge-for-3.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: Core: * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices that support Data Tag will provide increased throughput for metadata. * Faster detection of card removal on I/O errors. Drivers: * dw_mmc now supports eMMC Power Off Notify, has PCI support, and implements pre_req and post_req for asynchronous requests. * omap_hsmmc now supports device tree. * esdhc now has power management support. * sdhci-tegra now supports Tegra30 devices. * sdhci-spear now supports hibernation. * tmio_mmc now supports using a GPIO for card detection. * Intel PCH now supports 8-bit bus transfers. * tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: sh_mmcif: simplify bitmask macros mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug mmc: sh_mobile_sdhi: add a callback for board specific init code mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function mmc: sh_mobile_sdhi: do not manage PM clocks manually mmc: tmio_mmc: remove unused sdio_irq_enabled flag mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper mmc: tmio: calculate the native hotplug condition only once mmc: simplify mmc_cd_gpio_request() by removing two parameters mmc: sdhci-pci: allow 8-bit bus width for Intel PCH mmc: sdhci: check interrupt flags in ISR again mmc: sdhci-pci: Add MSI support mmc: core: warn when card doesn't support HPI mmc: davinci: Poll status for small size transfers mmc: davinci: Eliminate spurious interrupts mmc: omap_hsmmc: Avoid a regulator voltage change with dt mmc: omap_hsmmc: Convert hsmmc driver to use device tree mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 17:08:03 +0000