summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-esdhc-imx.c
AgeCommit message (Collapse)Author
2020-09-25mmc: sdhci: fix indentation mistakesKrzysztof Kozlowski
Fix inconsistent indenting, reported by Smatch: drivers/mmc/host/sdhci-esdhc-imx.c:1380 sdhci_esdhc_imx_hwinit() warn: inconsistent indenting drivers/mmc/host/sdhci-sprd.c:390 sdhci_sprd_request_done() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200923153739.30327-2-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.4 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # SH_MMCIF Tested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200903162412.1.Id501e96fa63224f77bb86b2135a5e8324ffb9c43@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdhci-esdhc-imx: remove unused codeHaibo Chen
Value assigned to a variable(err) is never used, so remove it. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1598265914-23606-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdhci-esdhc-imx: Reset before sending tuning command for manual tuningHaibo Chen
According to IC suggestion, everytime before sending the tuning command, need to reset the usdhc, so to reset the tuning circuit, to let every tuning command work well for the manual tuning method. For standard tuning method, IC already add the reset operation in the hardware logic. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1597135057-22272-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-13mmc: sdhci-esdhc-imx: dump internal IC debug status during errorHaibo Chen
USDHC of i.MX has internal IC debug register, which record the IC logical status. So dump these logical status in error condition, this can help analyzing issue. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592985830-13038-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuningHaibo Chen
In current code, we add 1ms dealy after each tuning command for standard tuning method. Adding this 1ms dealy is because USDHC default check the CMD CRC and DATA line. If detect the CMD CRC, USDHC standard tuning IC logic do not wait for the tuning data sending out by the card, trigger the buffer read ready interrupt immediately, and step to next cycle. So when next time the new tuning command send out by USDHC, card may still not send out the tuning data of the upper command，then some eMMC cards may stuck, can't response to any command, block the whole tuning procedure. If do not check the CMD CRC for tuning, then do not has this issue. USDHC will wait for the tuning data of each tuning command and check them. If the tuning data pass the check, it also means the CMD line also okay for tuning. So this patch disable the CMD CRC check for tuning, save some time for the whole tuning procedure. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1590488522-9292-2-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdhci-esdhc-imx: fix the mask for tuning start pointHaibo Chen
According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is TUNING_START_TAP, bit[7] of this register is to disable the command CRC check for standard tuning. So fix it here. Fixes: d87fc9663688 ("mmc: sdhci-esdhc-imx: support setting tuning start point") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1590488522-9292-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pinHaibo Chen
When use the specific GPIO to detect the card insert/remove, we can also add the GPIO as a wakeup source. When system suspend, insert or remove the card can wakeup the system. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1590547175-15070-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: sdhci-esdhc-imx: Add HS400 support for i.MX6SLLHaibo Chen
i.MX6SLL support MMC up to V5.0, which means support HS400 mode. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1589527703-19108-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: sdhci: use FIELD_GET/PREP for current capabilities bit masksMasahiro Yamada
Use FIELD_GET and FIELD_PREP to get access to the register fields. Delete the shift macros and use GENMASK() for the touched macros. Note that, this has the side-effect of changing the constants to 64-bit on 64-bit platforms. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/20200511062828.1791484-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: sdhci: use FIELD_GET/PREP for capabilities bit masksMasahiro Yamada
Use FIELD_GET and FIELD_PREP to get access to the register fields. Delete the shift macros and use GENMASK() for the touched macros. Note that, this has the side-effect of changing the constants to 64-bit on 64-bit platforms. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200408072105.422-2-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-31Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for host software queue for (e)MMC/SD - Throttle polling rate for CMD6 - Update CMD13 busy condition check for CMD6 commands - Improve busy detect polling for erase/trim/discard/HPI - Fixup support for HW busy detection for HPI commands - Re-work and improve support for eMMC sanitize commands MMC host: - mmci: * Add support for sdmmc variant revision 2.0 - mmci_sdmmc: * Improve support for busyend detection * Fixup support for signal voltage switch * Add support for tuning with delay block - mtk-sd: * Fix another SDIO irq issue - sdhci: * Disable native card detect when GPIO based type exist - sdhci: * Add option to defer request completion - sdhci_am654: * Add support to set a tap value per speed mode - sdhci-esdhc-imx: * Add support for i.MX8MM based variant * Fixup support for standard tuning on i.MX8 usdhc * Optimize for strobe/clock dll settings * Fixup support for system and runtime suspend/resume - sdhci-iproc: * Update regulator/bus-voltage management for bcm2711 - sdhci-msm: * Prevent clock gating with PWRSAVE_DLL on broken variants * Fix management of CQE during SDHCI reset - sdhci-of-arasan: * Add support for auto tuning on ZynqMP based platforms - sdhci-omap: * Add support for system suspend/resume - sdhci-sprd: * Add support for HW busy detection * Enable support host software queue - sdhci-tegra: * Add support for HW busy detection - tmio/renesas_sdhi: * Enforce retune after runtime suspend - renesas_sdhi: * Use manual tap correction for HS400 on some variants * Add support for manual correction of tap values for tunings" * tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: cavium-octeon: remove nonsense variable coercion mmc: mediatek: fix SDIO irq issue mmc: mmci_sdmmc: Fix clear busyd0end irq flag dt-bindings: mmc: Fix node name in an example mmc: core: Re-work the code for eMMC sanitize mmc: sdhci: use FIELD_GET for preset value bit masks mmc: sdhci-of-at91: Display clock changes for debug purpose only mmc: sdhci: iproc: Add custom set_power() callback for bcm2711 mmc: sdhci: am654: Use sdhci_set_power_and_voltage() mmc: sdhci: at91: Use sdhci_set_power_and_voltage() mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage() mmc: sdhci: arasan: Use sdhci_set_power_and_voltage() mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage() mmc: vub300: Use scnprintf() for avoiding potential buffer overflow dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability sdhci: tegra: Implement Tegra specific set_timeout callback mmc: sdhci-omap: Add Support for Suspend/Resume mmc: renesas_sdhi: simplify execute_tuning mmc: renesas_sdhi: Use BITS_PER_LONG helper ...
2020-03-24mmc: sdhci-esdhc-imx: restore pin state when resume backHaibo Chen
In some low power mode, SoC will lose the pin state, so need to restore the pin state when resume back. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1582100757-20683-8-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: clear DMA_SEL when disable DMA modeHaibo Chen
Currently, when use standard tuning, driver default disable DMA just before send tuning command. But on i.MX8 usdhc, this is not enough. Need also clear DMA_SEL. If not, once the DMA_SEL select AMDA2 before, even dma already disabled, when send tuning command, usdhc will still prefetch the ADMA script from wrong DMA address, then we will see IOMMU report some error which show lack of TLB mapping. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100757-20683-7-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: clear pending interrupt and halt cqhciHaibo Chen
On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the the 1st linux configure power/clock for the 2nd Linux. When the 2nd Linux is booting into rootfs stage, we let the 1st Linux to destroy the 2nd linux, then restart the 2nd linux, we met SDHCI dump as following, after we clear the pending interrupt and halt CQCTL, issue gone. [ 1.334594] mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. [ 1.334595] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 1.334599] mmc2: sdhci: Sys addr: 0xa05dcc00 | Version: 0x00000002 [ 1.345538] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000000 [ 1.345541] mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000033 [ 1.345543] mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000031 [ 1.345547] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 1.357903] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000003f [ 1.357905] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 1.357908] mmc2: sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b [ 1.357911] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 1.370268] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b400 [ 1.370270] mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff [ 1.370273] mmc2: sdhci: Resp[0]: 0x00000b00 | Resp[1]: 0xffffffff [ 1.370276] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 1.382132] mmc2: sdhci: Host ctl2: 0x00000000 [ 1.382135] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xa2040208 [ 2.060932] mmc2: Unexpected interrupt 0x00004000. [ 2.065538] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 2.071720] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000002 [ 2.077902] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 2.084083] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 2.090264] mmc2: sdhci: Present: 0x01f88009 | Host ctl: 0x00000011 [ 2.096446] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 2.102627] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x000010ff [ 2.108809] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00004000 [ 2.114990] mmc2: sdhci: Int enab: 0x007f1003 | Sig enab: 0x007f1003 [ 2.121171] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 2.127353] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b400 [ 2.133534] mmc2: sdhci: Cmd: 0x0000371a | Max curr: 0x00ffffff [ 2.139715] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 2.145896] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 2.152077] mmc2: sdhci: Host ctl2: 0x00000000 [ 2.156342] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100757-20683-6-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MMHaibo Chen
Add new esdhc_soc_data, with compatible string "fsl,imx8mm-usdhc". Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100757-20683-5-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: add flag ESDHC_FLAG_BROKEN_AUTO_CMD23Haibo Chen
Since L4.15, community involve the commit 105819c8a545 ("mmc: core: use mrq->sbc when sending CMD23 for RPMB"), let the usdhc to decide whether to use ACMD23 for RPMB. This CMD23 for RPMB need to set the bit 31 to its argument, if not, the RPMB write operation will return general fail. According to the sdhci logic, SDMA mode will disable the ACMD23, and only in ADMA mode, it will chose to use ACMD23 if the host support. But according to debug, and confirm with IC, the imx6qpdl/imx6sx/imx6sl/imx7d do not support the ACMD23 feature completely. These SoCs only use the 16 bit block count of the register 0x4 (BLOCK_ATT) as the CMD23's argument in ACMD23 mode, which means it will ignore the upper 16 bit of the CMD23's argument. This will block the reliable write operation in RPMB, because RPMB reliable write need to set the bit31 of the CMD23's argument. This is the hardware limitation. So for imx6qpdl/imx6sx/imx6sl/imx7d, it need to broke the ACMD23 for eMMC, SD card do not has this limitation, because SD card do not support reliable write. For imx6ul/imx6ull/imx6sll/imx7ulp/imx8, it support the ACMD23 completely, it change to use the 0x0 register (DS_ADDR) to put the CMD23's argument in ADMA mode. This patch add a new flag ESDHC_FLAG_BROKEN_AUTO_CMD23, and add this flag to imx6q/imx6sx/imx6sl/imx7d, and due to the imx6sll share the same compatible string with imx6sx before, and imx6sll do not has this limitation, so add a new compatible string for imx6sll. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100757-20683-4-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: optimize the strobe dll settingHaibo Chen
After set the STROBE SLV delay target value, it need to wait some time to let the usdhc lock the REF and SLV clock. In normal case, 1~2us is enough for imx8/imx6 and imx7d, and 4~5us is enough for imx7ulp, but when do reboot stress test or do the bind/unbind stress test, sometimes need to wait about 10us to get the status lock. This patch optimize delay handle method, only print the warning message if the status is still not lock after 1ms delay. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100757-20683-3-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: optimize the clock settingHaibo Chen
When force clock off, check the SDOFF of register PRSSTAT to make sure the clock is gate off. Before force clock on, check the SDSTB of register PRSSTAT to make sure the clock is stable, this will eliminate the clock glitch. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100757-20683-2-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: add strobe-dll-delay-target supportHaibo Chen
strobe-dll-delay-target is the delay cell add on the strobe line. Strobe line the the uSDHC loopback read clock which is use in HS400 mode. Different strobe-dll-delay-target may need to set for different board/SoC. If this delay cell is not set to an appropriate value, we may see some read operation meet CRC error after HS400 mode select which already pass the tuning. This patch add the strobe-dll-delay-target setting in driver, so that user can easily config this delay cell in dts file. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100757-20683-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: restore the per_clk rate in PM_RUNTIMEHaibo Chen
When pm_runtime_suspend is run, a call to SCFW power off the SS (SS is a power domain, usdhc belong to this SS power domain) in which the resource resides is made. The SCFW can power off the SS if no other resource in active in that SS. If so, all state associated with all the resources within the SS that is powered off is lost, this includes the clock rates, clock state etc. When pm_runtime_resume is called, the SS associated with that resource is powered up. But the clocks are left in the default state. This patch restore clock rate in pm_runtime_resume, make sure the clock is right rather than depending on the default state setting by SCFW. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100563-20555-5-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhci-imx: retune needed for Mega/Mix enabled SoCsHaibo Chen
For Mega/Mix enabled SoCs like MX7D and MX6SX, uSDHC will lost power in LP mode no matter whether the MMC_KEEP_POWER flag is set or not. This may cause state misalign between kernel and HW, especially for SDIO3.0 WiFi cards. e.g. SDIO WiFi driver usually will keep power during system suspend. And after resume, no card re-enumeration called. But the tuning state is lost due to Mega/Mix. Then CRC error may happen during next data transfer. So we should always fire a mmc_retune_needed() for such type SoC to tell MMC core retuning is needed for next data transfer. mmc: sdhci-esdhci-imx: retune needed for Mega/Mix enabled SoCs Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582100563-20555-4-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: sdhci-esdhc-imx: no fail when no pinctrl availableHaibo Chen
When using jailhouse to support two Linux on i.MX8MQ EVK, we use the 1st Linux to configure pinctrl for the 2nd Linux. Then the 2nd Linux could use the mmc without pinctrl driver. So give a warning message when no pinctrl available, but no fail probe. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1582100563-20555-3-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-14drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*()Rafael J. Wysocki
Call cpu_latency_qos_add/remove_request() instead of pm_qos_add/remove_request(), respectively, because the latter are going to be dropped. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
2019-12-18mmc: core: Remove mmc_gpiod_request_*(invert_gpio)Michał Mirosław
Now that invert_gpio arguments are unused, let's remove them. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/64d766d1f8af2e22bce32f4ffa453f7234207ad6.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: core: Rework wp-gpio handlingMichał Mirosław
Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be inverted compared to DT/platform-specified polarity. The flag is not used after init in GPIO mode anyway. No functional changes intended. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/a60f563f11bbff821da2fa2949ca82922b144860.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: sdhci-esdhc-imx: Convert to pinctrl_select_default_state()Ulf Hansson
Let's drop the boilerplate code for managing the default pinctrl state and convert into using the new pinctrl_select_default_state(). Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191206170821.29711-7-ulf.hansson@linaro.org
2019-09-11mmc: sdhci: Drop redundant code for SDIO IRQsUlf Hansson
Nowadays sdhci prevents runtime suspend when SDIO IRQs are enabled. However, some variants such as sdhci-esdhc-imx's, tries to allow runtime suspend while having the SDIO IRQs enabled, but without supporting remote wakeups. This support is a bit questionable, especially if the host device have a PM domain attached that can be power gated, but more importantly, the code have also become redundant (which was not the case when it was introduced). Rather than keeping the redundant code around, let's drop it and leave this to be revisited later on. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-06mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resumingBaolin Wang
The SD host controller specification defines 3 types software reset: software reset for data line, software reset for command line and software reset for all. Software reset for all means this reset affects the entire Host controller except for the card detection circuit. In sdhci_runtime_resume_host() we always do a software "reset for all", which causes the Spreadtrum variant controller to work abnormally after resuming. To fix the problem, let's do a software reset for the data and the command part, rather than "for all". However, as sdhci_runtime_resume() is a common sdhci function and we don't want to change the behaviour for other variants, let's introduce a new in-parameter for it. This enables the caller to decide if a "reset for all" shall be done or not. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULPBOUGH CHEN
Add HS400 support for iMX7ULP B0. According to IC suggest, need to clear the STROBE_DLL_CTRL_RESET before any setting of STROBE_DLL_CTRL register. USDHC has register bits(bit[27~20] of register STROBE_DLL_CTRL) for slave sel value. If this register bits value is 0, it needs 256 ref_clk cycles to update slave sel value. IC suggest to set bit[27~20] to 0x4, it only need 4 ref_clk cycle to update slave sel value. This will short the lock time of slave. i.MX7ULP B0 will need more time to lock the REF and SLV, so change to add 5us delay. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidleBOUGH CHEN
On some SoCs such as i.MX7ULP, there is no busfreq driver, but cpuidle has some levels which may disable system/bus clocks, so need to add pm_qos to prevent cpuidle from entering low level idles and make sure system/bus clocks are enabled when usdhc is active. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28Merge branch 'fixes' into nextUlf Hansson
2019-02-28mmc: sdhci-esdhc-imx: correct the fix of ERR004536BOUGH CHEN
Commit 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") involve the fix of ERR004536, but the fix is incorrect. Double confirm with IC, need to clear the bit 7 of register 0x6c rather than set this bit 7. Here is the definition of bit 7 of 0x6c: 0: enable the new IC fix for ERR004536 1: do not use the IC fix, keep the same as before Find this issue on i.MX845s-evk board when enable CMDQ, and let system in heavy loading. root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M & root@imx8mmevk:~# memtester 1000M > /dev/zero & root@imx8mmevk:~# [ 139.897220] mmc2: cqhci: timeout for tag 16 [ 139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 139.907862] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 139.914311] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 [ 139.920753] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 139.927193] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 139.933634] mmc2: cqhci: TDL base: 0x7809c000 | TDL up32: 0x00000000 [ 139.940073] mmc2: cqhci: Doorbell: 0x00030000 | TCN: 0x00000000 [ 139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000 [ 139.952967] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 139.959411] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 139.965857] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 139.972308] mmc2: cqhci: Resp idx: 0x0000002e | Resp arg: 0x00000900 [ 139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.985214] mmc2: sdhci: Sys addr: 0xb2c19000 | Version: 0x00000002 [ 139.991669] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000400 [ 139.998127] mmc2: sdhci: Argument: 0x40110400 | Trn mode: 0x00000033 [ 140.004618] mmc2: sdhci: Present: 0x01088a8f | Host ctl: 0x00000030 [ 140.011113] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 140.017583] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 140.024039] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 140.030497] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 140.036972] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 140.043426] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 140.049867] mmc2: sdhci: Cmd: 0x00002c1a | Max curr: 0x00ffffff [ 140.056314] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 140.062755] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 140.069195] mmc2: sdhci: Host ctl2: 0x00000008 [ 140.073640] mmc2: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x7809c108 [ 140.080079] mmc2: sdhci: ============================================ [ 140.086662] mmc2: running CQE recovery Fixes: 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQEBOUGH CHEN
After system suspend, CQE is in cqhci_off state, which set the HALT bit, make CQE in HALT state. If the SoC do not power down the USDHC module, then when system resume back, this bit keep the same, still set. Though there is a sdhci reset during sdhci_resume_host(), but this reset do not impact the CQE part, so need to clear this bit when enable CQE, otherwise CQE will stuck in the first CMDQ request after system resume back. Find this issue on NXP i.MX845s-mek board [ 105.919862] mmc2: cqhci: timeout for tag 6 [ 105.923965] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 105.930407] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 105.936847] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000001 [ 105.943286] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 105.949725] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 105.956164] mmc2: cqhci: TDL base: 0x7809b000 | TDL up32: 0x00000000 [ 105.962604] mmc2: cqhci: Doorbell: 0x00000040 | TCN: 0x00000000 [ 105.969043] mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 [ 105.975483] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 105.981922] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 105.988362] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 105.994801] mmc2: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 [ 106.001240] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 106.007680] mmc2: sdhci: Sys addr: 0xb2b37800 | Version: 0x00000002 [ 106.014120] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 106.020560] mmc2: sdhci: Argument: 0x00010000 | Trn mode: 0x00000013 [ 106.026999] mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 [ 106.033439] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 106.039878] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 106.046318] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 106.052757] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 106.059196] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 106.065635] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 106.072075] mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff [ 106.078514] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x31360181 [ 106.084954] mmc2: sdhci: Resp[2]: 0x44473430 | Resp[3]: 0x00450100 [ 106.091392] mmc2: sdhci: Host ctl2: 0x00000008 [ 106.095836] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7804b208 [ 106.102274] mmc2: sdhci: ============================================ [ 106.108785] mmc2: running CQE recovery Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: slot-gpio: Remove override_active_level on WPLinus Walleij
The argument "override_active_level" made it possible to enforce a specific polarity on the write-protect GPIO line. All callers in the kernel pass "false" to this call after I have converted all drivers to use GPIO machine descriptors, so remove the argument and clean out this. This kind of polarity inversion should be handled by the GPIO descriptor inside the GPIO library if needed. This rids us of one instance of the kludgy calls into the gpiod_get_raw_value() API. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: fix return value check in sdhci_esdhc_imx_probe()Wei Yongjun
In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: fadac7488064 ("mmc: sdhci-esdhc-imx: add CMDQ support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add DCMD support for CMDQBOUGH CHEN
Currently, USDHC do not generate transfer complete interrupt when send a non-data-command with R1b response. But if want to support DCMD in CMDQ, need to change this, the DCMD IC logic require the USDHC to enable this function, otherwise DCMD will never get a CC(command complete) interrupt. This patch set ESDHC_VEND_SPEC2_EN_BUSY_IRQ and add DCMD support. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add CMDQ supportBOUGH CHEN
Add CMDQ support for imx8qm/imx8qxp. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Rebased on top of latest changes] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXPBOUGH CHEN
Add an new esdhc_soc_data for i.MX8QXP, and add HS400_ES mode support. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Rebased on top of latest changes] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: remove the 100MHz limitation for Strobe DLLBOUGH CHEN
For some eMMC, after switch to HS400ES mode, it need to config the strobe dll target dealy even if the clock is 50MHZ or 25MHz, otherwise will meet CMD index/crc error when send CMD13 to check the switch status. [ 2.473915] IRQ status 0x000a8001 [ 2.473934] mmc2: mmc_select_hs400es failed, error -84 [ 2.473938] mmc2: error -84 whilst initialising MMC card Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add delay between tuning cyclesBOUGH CHEN
It's observed that i.MX uSDHC needed delay between tuning cycles for HS200 successful tuning. This patch is to set 1ms delay for that. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: add SD clock limitation for imx6ullBOUGH CHEN
i.MX6ULL has errata ERR010450, point out that due to SOC I/O timing limitation, for eMMC HS200 and SD/SDIO 3.0 SDR104, the clock rate can't exceed 150MHz. And for eMMC DDR52 and SD/SDIO DDR50 mode, the clock rate can't exceed 45MHz. This patch add this limit for imx6ull. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Fixed comments and whitespace] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: fix HS400 timing issueBOUGH CHEN
Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/ MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS, we can not do tuning reset, otherwise HS400 timing is not right. Here is the process of init HS400, first finish tuning in HS200 mode, then switch to HS mode and 8 bit DDR mode, finally switch to HS400 mode. If we do tuning reset in HS mode, this will cause HS400 mode lost the tuning setting, which will cause CRC error. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci: usdhc: do not do tuning for DDR50 mode.BOUGH CHEN
DDR50 tuning is optinally defined in sd 3.0 spec. And i.MX uSDHC internally already uses a fixed optimized timing for DDR50, normally does not require tuning for DDR50 mode. This patch specify a new execute_tuning function for i.MX uSDHC, do not impact i.MX eSDHC. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: clear ESDHC_STD_TUNING_EN for manual tuning methodBOUGH CHEN
The bit ESDHC_STD_TUNING_EN may be configed by bootloader code if it choose to use standard tuning method. So on linux side, if choose to use manual tuning method, need to clear the bit ESDHC_STD_TUNING_EN, remove the impact of bootloader code. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: sdhci-esdhc-imx: Constify driver dataAndrey Smirnov
Variant specific driver data doesn't change at run-time, so mark it as const to reflect that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci: imx: Use the slot GPIO descriptorLinus Walleij
Simplify things by making the i.MX SDHCI driver just use slot GPIO with descriptors instead of passing around the global GPIO numbers that we want to get rid of. As it turns out, just one single board is using the platform data to pass in GPIOs numbers for CD and WP, so we augment this to use a machine descriptor table instead. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERRAdrian Hunter
The SDHCI_ACMD12_ERR register is used for auto-CMD23 and auto-CMD12 errors, as is the SDHCI_INT_ACMD12ERR interrupt bit. Rename them to SDHCI_AUTO_CMD_STATUS and SDHCI_INT_AUTO_CMD_ERR respectively. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-16mmc: sdhci-esdhc-imx: fix indentStefan Agner
Fix indent. This also makes disable/enable clock blocks look alike. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 06:20:03 +0000