summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/mmci.c
AgeCommit message (Collapse)Author
2014-05-12mmc: mmci: Enforce mmc capabilities through DTUlf Hansson
Remove the option to provide the flags for mmc capabilities as platform data, enforce it through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Enforce DT for signal direction and feedback clockUlf Hansson
Remove the option to provide signal direction configuration and feeback clock as platform data, enforce it through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Enable MMC_CAP_CMD23Ulf Hansson
This is pure software configuration, which mmci has been supporting for a while. Let's enable it as default so we can take benefit from it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Use the common mmc DT parserUlf Hansson
Let mmci DT parser only handle the specific bindings related to mmci and extend the DT support by converting to the common mmc DT parser. While both DT and platform data exist, DT takes precedence. If there are supplied DT data, the card detect and write protect GPIOS are enforced to be provided through it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Add DT bindings for feedback clock pinUlf Hansson
The ST Micro variant supports the option of using a feedback clock signal in favor of the clockout pin when latching incoming signals on the data bus. Since this is matter of how pins are being routed we need to provide a new DT binding to be able to configure this through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-12mmc: mmci: Add DT bindings for signal directionUlf Hansson
Some variants have support for indicating the bus signal directions, which currently are configured through platform data. Add corresponding DT bindings to enable us to move away from using the platform data. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-12mmc: mmci: Convert to devm functionsUlf Hansson
Converting to devm functions to simplify error handling in ->probe() and to cleanup ->remove(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Convert to the mmc gpio APIUlf Hansson
To avoid duplication of code while handling card detect and write protect GPIO pins/irqs, let's convert to use the mmc gpio API. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Put the device into low power state at system suspendUlf Hansson
For CONFIG_PM_SLEEP, the device were always left in full power state after system suspend. We solely relied on a power domain to put it into low power state, which is an unreasonable requirement to put on SOCs to implement. Especially for those SOCs not supporting power domains at all. Use pm_runtime_force_suspend|resume() as the system suspend callbacks, to resolve the issue. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Let runtime PM callbacks be available for CONFIG_PMUlf Hansson
Convert to the SET_PM_RUNTIME_PM macro while defining the runtime PM callbacks. This means the callbacks becomes available for both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME, which is needed to handle the combinations of these scenarios. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Mask IRQs for all variants during runtime suspendUlf Hansson
In runtime suspended state, we are not expecting IRQs and thus we can safely mask them, not only for pwrreg_nopower variants but for all. Obviously we then also need to make sure we restore the IRQ mask while becoming runtime resumed. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-04-20mmc: mmci: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
Added MMC_DDR52 as eMMC's DDR mode distinguished from SD-UHS. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: mmci: Enable support for busy detection for ux500 variantUlf Hansson
The ux500 variants have HW busy detection support, which is indicated by the busy_detect flag. For these variants let's enable the MMC_CAP_WAIT_WHILE_BUSY flag and add the support for it. The mmc core will provide the RSP_BUSY command flag for those requests we should care about busy detection. Regarding the max_busy_timeout, the HW don't support busy detection timeouts so at this initial step let's make it simple and set it to zero to indicate we are able to support any timeout. Cc: Russell King <linux@arm.linux.org.uk> Cc: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: mmci: Handle CMD irq before DATA irqUlf Hansson
In case of a read operation both MCI_CMDRESPEND and MCI_DATAEND can be set in the status register when entering the interrupt handler. This is due to that the card start sending data before the host has acknowledged the command response. To resolve the issue for this scenario, we must start by handling the CMD irq instead of the DATA irq. The reason is beacuse the completion of the DATA irq will not respect the current command and then causing it to be garbled. Cc: Russell King <linux@arm.linux.org.uk> Cc: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2013-12-29ARM: 7906/1: mmc: mmci: Remove unnecessary amba_set_drvdata()Michal Simek
Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-11-18Merge tag 'mmc-updates-for-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.13: Core: - Improve runtime PM support, remove mmc_{suspend,resume}_host(). - Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're outside of the resume sequence (in runtime_resume) to decrease system resume time. Drivers: - dw_mmc: Support HS200 mode. - sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6. - sdhci-pci: Add support for Intel Clovertrail and Merrifield" * tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (108 commits) mmc: wbsd: Silence compiler warning mmc: core: Silence compiler warning in __mmc_switch mmc: sh_mmcif: Convert to clk_prepare|unprepare mmc: sh_mmcif: Convert to PM macros when defining dev_pm_ops mmc: dw_mmc: exynos: Revert the sdr_timing assignment mmc: sdhci: Avoid needless loop while handling SDIO interrupts in sdhci_irq mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume mmc: core: Improve runtime PM support during suspend/resume for sd/mmc mmc: core: Remove redundant mmc_power_up|off at runtime callbacks mmc: Don't force card to active state when entering suspend/shutdown MIPS: db1235: Don't use MMC_CLKGATE mmc: core: Remove deprecated mmc_suspend|resume_host APIs mmc: mmci: Move away from using deprecated APIs mmc: via-sdmmc: Move away from using deprecated APIs mmc: tmio: Move away from using deprecated APIs mmc: sh_mmcif: Move away from using deprecated APIs mmc: sdricoh_cs: Move away from using deprecated APIs mmc: rtsx: Remove redundant suspend and resume callbacks mmc: wbsd: Move away from using deprecated APIs mmc: pxamci: Remove redundant suspend and resume callbacks ...
2013-10-30mmc: mmci: Move away from using deprecated APIsUlf Hansson
Suspend and resume of cards are being handled from the protocol layer and consequently the mmc_suspend|resume_host APIs are deprecated. This means we can simplify the suspend|resume callbacks by removing the use of the deprecated APIs. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-19ARM: 7834/1: mmc: mmci: Save and restore register contextUlf Hansson
If a corresponding power domain exists for the device and it manages to cut the domain regulator while the device is runtime suspended, the IP loses it's registers context. We restore the context in the .runtime_resume callback from the existing register caches to adapt to this situation. We also want to make sure the registers are in a known state while restoring context in the case when the power domain did not drop the power, since there are restrictions for the order of writing to these registers. To handle this, we clear the registers in the .runtime_suspend callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-19ARM: 7833/1: mmc: mmci: Adapt to register write restrictionsUlf Hansson
After a write to the MMCICLOCK register data cannot be written to this register for three feedback clock cycles. Writes to the MMCIPOWER register must be separated by three MCLK cycles. Previously no issues has been observered, but using higher ARM clock frequencies on STE- platforms has triggered this problem. The MMCICLOCK register is written to in .set_ios and for some data transmissions for SDIO. We do not need a delay at the data transmission path, because sending and receiving data will require more than three clock cycles. Then we use a simple logic to only delay in .set_ios and thus we don't affect throughput performance. Signed-off-by: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-19ARM: 7832/1: mmc: mmci: Use optional sleep pinctrl stateUlf Hansson
By optionally putting the pins into sleep state in the .runtime_suspend callback we can accomplish two things. One is to minimize current leakage from pins and thus save power, second we can prevent the IP from driving pins output in an uncontrolled manner, which may happen if the power domain drops the domain regulator. When returning from idle, entering .runtime_resume callback, the pins are restored to default state. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-19ARM: 7831/1: mmc: mmci: Adapt to new pinctrl handlingUlf Hansson
There is no need for every driver to fetch a pinctrl handle and to select the default state. Instead this is handled by the device driver core, thus we can remove this piece of code from mmci. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7726/1: mmc: mmci: Add card_busy function to improve UHS card supportUlf Hansson
To verify a signal voltage switch at initialization of UHS cards the .card_busy callback is used. For some of the ST-variants, card busy detection on the DAT0 pin is supported. We extend the variant struct with a busy_detect flag to indicate support for it. A corresponding busy detect function, which polls the busy status bit, is then set to the .card_busy callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7725/1: mmc: mmci: Cache MMCIDATACTRL registerUlf Hansson
Add a cache variable in the host struct that reflects the current data in the MMCIDATACTRL register. This patch will not introduce any functional change but instead provide an easy option to keep specific bits in the register between each data transfer. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7724/1: mmc: mmci: Support signal voltage switch for UHS cardsUlf Hansson
Add .start_signal_voltage_switch callback to be able to support UHS cards. The voltage switch requires the optional vqmmc regulator to exist since the actual voltage switch will be performed directly on it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7721/1: mmc: mmci: Fixup regulator handling for vqmmcUlf Hansson
We can not rely on regulator_is_enabled to decide whether to enable|disable the regulator. It would mean that the reference counter for it is not balanced properly. Instead keep track of our internal state by using a new flag in the host struct, so we can take correct decisions. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7713/1: mmc: mmci: Allow MMCI to request channels with information ↵Lee Jones
acquired from DT Currently, if DMA information isn't passed from platform data, then DMA will not be used. This patch allows DMA information obtained though Device Tree to be used as well. Cc: Chris Ball <cjb@laptop.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7719/1: mmc: mmci: Support for CMD23Ulf Hansson
Support added for transmission of CMD23 during multi block read or write. In order to activate this feature, MMC_CAP_CMD23 flag needs to be enabled in the capabilities field. Note that CMD23 support is mandatory to support features like reliable write, data tag, context ID, packed command. This patch is based upon a patch from Saugata Das. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7718/1: mmc: mmci: Set actual clock for debug purposeUlf Hansson
Update cclk to the acutal used value and copy it to the actual_clock variable in the mmc host for debug purpose. Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7717/1: mmc: mmci: Use devm_clk_get APIUlf Hansson
Converting to devm_clk_get simplifies error handling in probe and we can remove other corresponding calls to clk_put. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-10ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checkedLee Jones
This patch suppresses the warning below: drivers/mmc/host/mmci.c: In function ‘mmci_set_ios’: drivers/mmc/host/mmci.c:1165:20: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Cc: Chris Ball <cjb@laptop.org> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01mmc: mmci: Move ios_handler functionality into the driverLee Jones
There are currently two instances of the ios_handler being used. Both of which mearly toy with some regulator settings. Now there is a GPIO regulator API, we can use that instead, and lessen the per platform burden. By doing this, we also become more Device Tree compatible. Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28ARM: 7630/1: mmc: mmci: Fixup and cleanup code for DMA handlingUlf Hansson
The cookie is now used to indicate if dma_unmap_sg shall be done in post_request. At DMA errors, the DMA job is immediately not only terminated but also unmapped. To indicate that this has been done the cookie is reset to zero. post_request will thus only do dma_umap_sg for requests which has a cookie not set to zero. Some corresponding duplicated code could then be removed and moreover some corrections at DMA errors for terminating the same DMA job twice has also been fixed. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-28ARM: 7631/1: mmc: mmci: Add new VE MMCI variantPawel Moll
The Versatile Express IOFPGA as shipped on VECD 5.0 (bitfiles v108/208 and v116/216) contains a modified version of the PL180 MMCI, with PeriphID Configuration value changed to 0x2. This version adds an optional "hardware flow control" feature. When enabled MMC card clock will be automatically disabled when FIFO is about to over/underflow and re-enabled once the host retrieved some data. This makes the controller immune to over/underrun errors caused by big interrupt handling latencies. This patch adds relevant device variant in the driver. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-23ARM: 7623/1: mmc: mmci: Fixup clock gating when freq is 0 for ST-variantsUlf Hansson
In the ST Micro variant, the MMCICLOCK register must not be used to gate the clock. Instead use MMCIPOWER register and by clearing the PWR_ON bit to do this. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-23ARM: 7622/1: mmc: mmci: Gate the clock in runtime suspend to save powerUlf Hansson
The amba bus is already performing same actions but for the apb_pclk. So here we just make sure the clock to card is gated as well to save more power. At runtime resume we will thus restore the clock again. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-08ARM: 7620/1: mmc: mmci: Convert to use mmc_regulator_get_supplyUlf Hansson
By using the mmc_regulator_get_supply API we are able to do some cleanups of the regulator code. Additionally let the regulator API handle the error printing. Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-08ARM: 7618/1: mmc: mmci: Support MMC_PM_KEEP_POWERUlf Hansson
Add MMC_PM_KEEP_POWER to pm_caps so SDIO clients are able to use this option to prevent power off in suspend. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-08ARM: 7617/1: mmc: mmci: Support for DDR modeUlf Hansson
Add support for DDR mode which may be used for the ux500v2 variant. Corresponding capabilities to enable the DDR support must be set in the platform struct to enable the functionality. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-12Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ...
2012-12-11ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_repDavide Ciminaghi
Not all the architectures have readsl/writesl, use the more portable ioread32_rep/iowrite32_rep functions instead. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-28mmc: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mmc: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mmc: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-04ARM: 7562/2: MMCI: fetch pinctrl handle and set default stateLinus Walleij
This fetches the pinctrl resource for the MMCI driver, and if a "default" state is found, it is activated. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-18ARM: 7552/1: mmc: mmci: Switching off HWFC for SDIO depends on MCLKUlf Hansson
For writes, HWFC shall be switched off when transfer size <= 8 bytes and when MCLK rate is above 50 MHz. For 50MHz and below it shall be switched off when transfer size < 8 bytes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-18ARM: 7551/1: mmc: mmci: Fix incorrect handling of HW flow control for SDIOUlf Hansson
For data writes <= 8 bytes, HW flow control was disabled but never re-enabled when the transfer was completed. This meant that a following read request would give buffer overrun errors. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-03mmc: mmci: use clk_prepare_enable and clk_disable_unprepareJulia Lawall
clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. They make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-17ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOsRoland Stigge
If the GPIOs used by the MMCI driver are not registered yet when the driver is probe()d, they can't be used. This happens if the mmci driver is probed before the respective GPIO controller (e.g. on the LPC32xx EA3250 board, the PCA9532 GPIO controller would be initialized via DT after mmci). Therefore, we defer mmci in this case. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-17ARM: 7426/1: mmc: mmci: Remove wrong error handling of gpio 0Roland Stigge
Zero is a valid GPIO and shouldn't be handled as an error return code from of_get_named_gpio(). It was a leftover from old code before getting pdata->gpio_*() was modified. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-14ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree bootLee Jones
When booting with Device Tree enabled, platform specific information is gathered by parsing the DT binary. Platform data is subsequently populated with the result. The memory required for this is not automatically allocated during Device Tree boot, so we'll do it here instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 01:45:23 +0000