summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2020-05-25habanalabs: don't set default fence_ops->waitDaniel Vetter
It's the default. Also so much for "we're not going to tell the graphics people how to review their code", dma_fence is a pretty core piece of gpu driver infrastructure. And it's very much uapi relevant, including piles of corresponding userspace protocols and libraries for how to pass these around. Would be great if habanalabs would not use this (from a quick look it's not needed at all), since open source the userspace and playing by the usual rules isn't on the table. If that's not possible (because it's actually using the uapi part of dma_fence to interact with gpu drivers) then we have exactly what everyone promised we'd want to avoid. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-22misc: rtsx: Add short delay after exit from ASPMKlaus Doth
DMA transfers to and from the SD card stall for 10 seconds and run into timeout on RTS5260 card readers after ASPM was enabled. Adding a short msleep after disabling ASPM fixes the issue on several Dell Precision 7530/7540 systems I tested. This function is only called when waking up after the chip went into power-save after not transferring data for a few seconds. The added msleep does therefore not change anything in data transfer speed or induce any excessive waiting while data transfers are running, or the chip is sleeping. Only the transition from sleep to active is affected. Signed-off-by: Klaus Doth <kdlnx@doth.eu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22misc: rtsx: Remove unnecessary rts5249_set_aspm(), rts5260_set_aspm()Bjorn Helgaas
rts5249_set_aspm() and rts5260_set_aspm() do nothing more than the default rtsx_comm_set_aspm() does, so remove them and use the default. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200521180545.1159896-7-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22misc: rtsx: Simplify rtsx_comm_set_aspm()Bjorn Helgaas
Simplify rtsx_comm_set_aspm() and remove the now-unused rtsx_pci_enable_aspm(). rtsx_pci_disable_aspm() is still used by rtsx_pci_init_hw(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200521180545.1159896-6-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTLBjorn Helgaas
Instead of using the driver-specific rtsx_pci_update_cfg_byte() to update the PCIe Link Control Register, use pcie_capability_clear_and_set_word() like the rest of the kernel does. This makes it easier to maintain ASPM across the PCI core and drivers. Remove the now-unused rtsx_pci_update_cfg_byte() and ASPM_MASK_NEG definitions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200521180545.1159896-5-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22misc: rtsx: Use ASPM_MASK_NEG instead of hard-coded valueBjorn Helgaas
Use ASPM_MASK_NEG instead of hard-coded value, as other callers of rtsx_pci_update_cfg_byte() do. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200521180545.1159896-4-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22misc: rtsx: Removed unused dev_aspm_modeBjorn Helgaas
The struct rtsx_cr_option.dev_aspm_mode member is never set to anything other than DEV_ASPM_DYNAMIC (0). Remove it and code that tests it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200521180545.1159896-3-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22misc: rtsx: Remove unused pcr_opsBjorn Helgaas
Remove the following unused function pointers from struct pcr_ops: int (*set_ltr_latency)(struct rtsx_pcr *pcr, u32 latency); int (*set_l1off_sub)(struct rtsx_pcr *pcr, u8 val); void (*full_on)(struct rtsx_pcr *pcr); void (*power_saving)(struct rtsx_pcr *pcr); Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200521180545.1159896-2-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ocxl: Fix misleading commentAndrew Donnellan
In ocxl_context_free() we note that the AFU reference we're releasing was taken in "ocxl_context_init", a function that no longer exists. Fix it to say ocxl_context_alloc() instead, which is the new name for ocxl_context_init(), since it was renamed. Fixes: b9721d275cc2 ("ocxl: Allow external drivers to use OpenCAPI contexts") Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200226043923.5481-1-ajd@linux.ibm.com
2020-05-19misc: pci_endpoint_test: Add Device ID for RZ/G2E PCIe controllerLad Prabhakar
Add Renesas R8A774C0 in pci_device_id table so that pci-epf-test can be used for testing PCIe EP on RZ/G2E. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1589493809-2602-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19genwqe: convert get_user_pages() --> pin_user_pages()John Hubbard
This code was using get_user_pages*(), in a "Case 2" scenario (DMA/RDMA), using the categorization from [1]. That means that it's time to convert the get_user_pages*() + put_page() calls to pin_user_pages*() + unpin_user_pages() calls. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ Cc: Frank Haverkamp <haver@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Link: https://lore.kernel.org/r/20200518015237.1568940-1-jhubbard@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19drivers/mic/scif: convert get_user_pages() --> pin_user_pages()John Hubbard
This code was using get_user_pages*(), in a "Case 2" scenario (DMA/RDMA), using the categorization from [1]. That means that it's time to convert the get_user_pages*() + put_page() calls to pin_user_pages*() + unpin_user_pages() calls. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. Note that this effectively changes the code's behavior as well: it now ultimately calls set_page_dirty_lock(), instead of SetPageDirty(). This is probably more accurate. As Christoph Hellwig put it, "set_page_dirty() is only safe if we are dealing with a file backed page where we have reference on the inode it hangs off." [3] [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ [3] https://lore.kernel.org/r/20190723153640.GB720@lst.de Signed-off-by: John Hubbard <jhubbard@nvidia.com> Link: https://lore.kernel.org/r/20200518041307.1987328-1-jhubbard@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19habanalabs: update patched_cb_size for Wreg32Rachel Stahl
The patch_cb_size is not updated for Wreg32 in its validate function, so updated in goya_validate_cb. Signed-off-by: Rachel Stahl <rstahl@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: move event handling to common firmware fileOfir Bitton
Instead of writing similar event handling code for each ASIC, move the code to the common firmware file. This code will be used for GAUDI and all future ASICs. In addition, add two new fields to the auto-generated events file: valid and description. This will save the need to manually write the events description in the source code and simplify the code. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: enable gaudi code in driverOded Gabbay
Enable the GAUDI ASIC code in the pci probe callback of the driver so the driver will handle GAUDI ASICs. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add gaudi profiler moduleOmer Shpigelman
Add the GAUDI code to initialize the ASIC's profiler. The profile receives its initialization values from the user, same as in Goya, but the code to initialize is in the driver because the configuration space of the device is not directly exposed to the user. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add gaudi security moduleOmer Shpigelman
Add the code to initialize the security module of GAUDI. Similar to Goya, we have two dedicated mechanisms for security: Range Registers and Protection bits. Those mechanisms protect sensitive memory and configuration areas inside the device. In addition, in Gaudi we moved to a 3-level security scheme, where the F/W runs with the highest security level (Privileged), the driver runs with a less secured level (Secured) and the user is neither privileged nor secured. The security module in the driver configures the Secured parts so the user won't be able to access them. The Privileged parts are configured by the F/W. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add hwmgr module for gaudiOded Gabbay
The hwmgr module is responsible for messages sent to GAUDI F/W that are not common to all habanalabs ASICs. In GAUDI, we provide the user a simplified mode of controlling the ASIC clock frequency. Instead of three different clocks, we present a single clock property that the user can configure via sysfs. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add gaudi asic-dependent codeOded Gabbay
Add the ASIC-dependent code for GAUDI. Supply (almost) all of the function callbacks that the driver's common code need to initialize, finalize and submit workloads to the GAUDI ASIC. It also contains the code to initialize the F/W of the GAUDI ASIC and to receive events from the F/W. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add gaudi asic registers header filesOded Gabbay
Add the relevant GAUDI ASIC registers header files. These files are generated automatically from a tool maintained by the VLSI engineers. There are more files which are not upstreamed because only very few defines from those files are used in the driver. For those files, we copied the relevant defines into gaudi_regs.h and gaudi_masks.h, to reduce the size of this patch. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: get card type, location from F/WOmer Shpigelman
For Gaudi the driver gets two new additional properties from the F/W: 1. The card's type - PCI or PMC 2. The card's location in the Gaudi's box (relevant only for PMC). The card's location is also passed to the user in the HW IP info structure as it needs this property for establishing communication between Gaudis. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: support clock gating enable/disableOded Gabbay
In Gaudi there is a feature of clock gating certain engines. Therefore, add this property to the device structure. In addition, due to a limitation of this feature, the driver needs to dynamically enable or disable this feature during run-time. Therefore, add ASIC interface functions to enable/disable this function from the common code. Moreover, this feature must be turned off when the user wishes to debug the ASIC by reading/writing registers and/or memory through the driver's debugfs. Therefore, add an option to enable/disable clock gating via the debugfs interface. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: set PM profile to auto only for goyaOded Gabbay
For Gaudi, the driver doesn't change the PM profile automatically due to device-controlled PM capabilities. Therefore, set the PM profile to auto only for Goya so the driver's code to automatically change the profile won't run on Gaudi. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add dedicated define for hard resetOmer Shpigelman
Gaudi requires longer waiting during reset due to closing of network ports. Add this explanation to the relevant comment in the code and add a dedicated define for this reset timeout period, instead of multiplying another define. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: check if CoreSight is supportedOmer Shpigelman
Coresight is not supported on simulator, therefore add a boolean for checking that (currently used by un-upstreamed code). Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add signal/wait to CS IOCTL operationsOmer Shpigelman
Add the following two operations to the CS IOCTL: Signal: The signal operation is basically a command submission, that is created by the driver upon user request. It will be implemented using a dedicated PQE that will increment a specific SOB. There will be a new flag: HL_CS_FLAGS_SIGNAL. When the user set this flag in the CS IOCTL structure, the driver will execute a dedicated code path that will prepare this special PQE and submit it. The user only needs to provide a queue index on which to put the signal. Wait: The wait operation is also a command submission that is created by the driver upon user request. It will be implemented using a dedicated PQE that will contain packets of "ARM a monitor" + FENCE packet. There will be a new flag: HL_CS_FLAGS_WAIT. When the user set this flag in the CS structure, the driver will execute a dedicated code path that will prepare this special PQE and submit it. The user needs to provide the following parameters: 1. queue ID 2. an array of signal_seq numbers and the number of signals to wait on (the length of signal_seq_arr). The IOCTL will return the CS sequence number of the wait it put on the queue ID. Currently, the code supports signal_seq_nr==1. But this API definition will allow us to put a single PQE that waits on multiple signals. To correctly configure the monitor and fence, the driver will need to retrieve the specified signal CS object that contains the relevant SOB and its expected value. In case the signal CS has already been completed, there is no point of adding a wait operation. In this case, the driver will return to the user *without* putting anything on the PQ. The return code should reflect to the user that the signal was completed, as we won't return a CS sequence number for this wait. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: handle the h/w sync objectOmer Shpigelman
Define a structure representing the h/w sync object (SOB). a SOB can contain up to 2^15 values. Each signal CS will increment the SOB by 1, so after some time we will reach the maximum number the SOB can represent. When that happens, the driver needs to move to a different SOB for the signal operation. A SOB can be in 1 of 4 states: 1. Working state with value < 2^15 2. We reached a value of 2^15, but the signal operations weren't completed yet OR there are pending waits on this signal. For the next submission, the driver will move to another SOB. 3. ALL the signal operations on the SOB have finished AND there are no more pending waits on the SOB AND we reached a value of 2^15 (This basically means the refcnt of the SOB is 0 - see explanation below). When that happens, the driver can clear the SOB by simply doing WREG32 0 to it and set the refcnt back to 1. 4. The SOB is cleared and can be used next time by the driver when it needs to reuse an SOB. Per SOB, the driver will maintain a single refcnt, that will be initialized to 1. When a signal or wait operation on this SOB is submitted to the PQ, the refcnt will be incremented. When a signal or wait operation on this SOB completes, the refcnt will be decremented. After the submission of the signal operation that increments the SOB to a value of 2^15, the refcnt is also decremented. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: define ASIC-dependent interface for signal/waitOmer Shpigelman
This feature requires handling h/w resources which are a bit different from one ASIC to the other. Therefore, we need to define a set of interfaces the ASIC code provides to the common code to signal, wait, reset sync object and to reset and init a queue. As this feature is not supported in Goya, provide an empty implementation of those functions. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19uapi: habanalabs: add signal/wait operationsOmer Shpigelman
This is a pre-requisite to upstreaming GAUDI support. Signal/wait operations are done by the user to perform sync between two Primary Queues (PQs). The sync is done using the sync manager and it is usually resolved inside the device, but sometimes it can be resolved in the host, i.e. the user should be able to wait in the host until a signal has been completed. The mechanism to define signal and wait operations is done by the driver because it needs atomicity and serialization, which is already done in the driver when submitting work to the different queues. To implement this feature, the driver "takes" a couple of h/w resources, and this is reflected by the defines added to the uapi file. The signal/wait operations are done via the existing CS IOCTL, and they use the same data structure. There is a difference in the meaning of some of the parameters, and for that we added unions to make the code more readable. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: add missing MODULE_DEVICE_TABLEOded Gabbay
PCI drivers should use this define to declare their PCI ID table. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: print all CB handles as hex numbersDotan Barak
Make all the CB handles printed in the same way and not some as decimal and some as hex numbers. Signed-off-by: Dotan Barak <dbarak@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: update F/W register mapOded Gabbay
Update the mapping to the latest one used by the Firmware. No impact on the driver in this update. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: enable trace data compression (profiler)Adam Aharon
Set the STMTCSR.COMPEN bit to enable leading-zero trace data compression functionality for the extended stimulus ports. Signed-off-by: Adam Aharon <aaharon@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: load CPU device boot loader from hostOfir Bitton
Load CPU device boot loader during driver boot time in order to avoid flash write for every boot loader update. To preserve backward-compatibility, skip the device boot load if the device doesn't request it. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: leave space for 2xMSG_PROT in CBOded Gabbay
The user must leave space for 2xMSG_PROT in the external CB, so adjust the define of max size accordingly. The driver, however, can still create a CB with the maximum size of 2MB. Therefore, we need to add a check specifically for the user requested size. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: support hwmon_reset_history attributeChristine Gharzuzi
Support hwmon_temp_reset_histroy, hwmon_in_reset_history and hwmon_curr_reset attribute which resets the historical highest value. Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: Align protection bits configuration of all TPCsTomer Tayar
Align the protection bits configuration of all TPC cores to be as of TPC core 0. Fixes: a513f9a7eca5 ("habanalabs: make tpc registers secured") Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: Allow access to TPC LFSR registerTomer Tayar
Allow user access to TPC LFSR register, as it might be accessed by TPC kernels. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: Add INFO IOCTL opcode for time sync informationTomer Tayar
Add a new opcode to the INFO IOCTL that retrieves the device time alongside the host time, to allow a user application that want to measure device time together with host time (such as a profiler) to synchronize these times. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: hl_pci_set_dma_mask() can be statickbuild test robot
set function to be static as it is not called from outside its file. Signed-off-by: kbuild test robot <lkp@intel.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: handle barriers in DMA QMAN streamsOded Gabbay
When we have DMA QMAN with multiple streams, we need to know whether the command buffer contains at least one DMA packet in order to configure the barriers correctly when adding the 2xMSG_PROT at the end of the JOB. If there is no DMA packet, then there is no need to put engine barrier. This is relevant only for GAUDI as GOYA doesn't have streams so the engine can't be busy by another stream. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: retrieve DMA mask indication from firmwareOded Gabbay
Retrieve from the firmware the DMA mask value we need to set according to the device's PCI controller configuration. This is needed when working on POWER9 machines, as the device's PCI controller is configured in a different way in those machines. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: update firmware definitionsOded Gabbay
Add comments for the various errors and states of the firmware during boot. Add a mapping of a new register that will tell the driver whether the firmware executed the request from the driver or if it has encountered an error. Add a new enum for the possible values of this register. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: increase timeout during resetOded Gabbay
When doing training, the DL framework (e.g. tensorflow) performs hundreds of thousands of memory allocations and mappings. In case the driver needs to perform hard-reset during training, the driver kills the application and unmaps all those memory allocations. Unfortunately, because of that large amount of mappings, the driver isn't able to do that in the current timeout (5 seconds). Therefore, increase the timeout significantly to 30 seconds to avoid situation where the driver resets the device with active mappings, which sometime can cause a kernel bug. BTW, it doesn't mean we will spend all the 30 seconds because the reset thread checks every one second if the unmap operation is done. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: print warning when reset is requestedOded Gabbay
When the system administrator asks the driver to soft or hard reset the device through sysfs, the driver should display a warning in the kernel log to explain why it suddenly resets the device. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: unify and improve device cpu initOded Gabbay
Move the code of device CPU initialization from being ASIC-Dependent to common code. In addition, add support for the new error reporting feature of the firmware boot code. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: re-factor H/W queues initializationOmer Shpigelman
We want to remove the following restrictions/assumptions in our driver: 1. The H/W queue index is also the completion queue index. 2. The H/W queue index is also the IRQ number of the completion queue. 3. All queues of the same type have consecutive indexes. Therefore we add the support for H/W queues of the same type with nonconsecutive indexes and completion queue index and IRQ number different than the H/W queue index. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: remove stop-on-error flag from DMAOmer Shpigelman
Stop-on-error mode in DMA is useful as it stops the transaction immediately upon error e.g. page fault. But it may cause the next command submission to fail as is leaves the DMA in unstable state. Therefore we remove the stop-on-error configuration from the DMA. Stop-on-err is still available for debug. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-17habanalabs: don't wait for ASIC CPU after resetOded Gabbay
Upon reset of the ASIC, the driver would have waited for the CPU to come out of reset before finishing the reset process. This was done for the purpose of making the CPU available to answer FLR requests. However, when a VM shuts down, the driver isn't removed so a reset never happens. Therefore, remove this waiting period as we don't need it. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-15Merge tag 'vexpress-modules-for-soc-v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc VExpress modularization This series enables building various Versatile Express platform drivers as modules. The primary target is the Fast Model FVP which is supported in Android. As Android is moving towards their GKI, or generic kernel, the hardware support has to be in modules. Currently ARCH_VEXPRESS enables several built-in only drivers. Some of these are needed, but some are only needed for older 32-bit VExpress platforms and can just be disabled. * tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: vexpress: Don't select VEXPRESS_CONFIG bus: vexpress-config: Support building as module vexpress: Move setting master site to vexpress-config bus bus: vexpress-config: simplify config bus probing bus: vexpress-config: Merge vexpress-syscfg into vexpress-config mfd: vexpress-sysreg: Support building as a module mfd: vexpress-sysreg: Use devres API variants mfd: vexpress-sysreg: Drop unused syscon child devices mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO clk: vexpress-osc: Support building as a module clk: vexpress-osc: Use the devres clock API variants clk: versatile: Only enable SP810 on 32-bit by default clk: versatile: Rework kconfig structure amba: Retry adding deferred devices at late_initcall arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS ARM: vexpress: Move vexpress_flags_set() into arch code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 04:37:20 +0000